Hi, everyone i have a problem i try install 6.1wm and phone turn off and now stuck on Red, Green, Blue Screen. What need to do now? Thanks
lukonas said:
Hi, everyone i have a problem i try install 6.1wm and phone turn off and now stuck on Red, Green, Blue Screen. What need to do now? Thanks
Click to expand...
Click to collapse
off the battery and replace it on the device and then turn, if the device back into bootloader mode (3 color screen) then try to flash hspl 0.91 by jockyw !:good: you can reflash after WM 6.1 rom
Related
hi everyone
i tried to update rom but at the end of the process...UPDATE ERROR
I tried to recover but nothing...
Now my wizard is blocked in a very strange situation: bootmood (red green blue screen) is flashing turning on and off...
please help me! what can i do???
felixflo said:
hi everyone
i tried to update rom but at the end of the process...UPDATE ERROR
I tried to recover but nothing...
Now my wizard is blocked in a very strange situation: bootmood (red green blue screen) is flashing turning on and off...
please help me! what can i do???
Click to expand...
Click to collapse
As long as its getting into Bootloaders (RGB) nothing to worry.
Most probably you have a weak or dead battery,recharge it fully and flash the official stock rom in Bootloaders,it'll recover back,but if the battery is gonner,get a new battery.
thx
now when i try to flash the rom...ERROR invalid update tool
....
Download it
Down load a RUU from the TNT's ROM i think is the better Ruu for wizard but search it men or try the Mun's one!
Hey guys i have a Imate k-jam..but its stuck like hell..i mean i tried just about everything i could to get it out of bootloader...whenever i press the power button the phone just automatically goes into bootloader mode..and nothing loads..i tried buttons roms..but it stuck at 98%..den i tried the other rom in a walk thorugh and it upgraded and changed my IPL from 1.01 to 1.06 (SPL is the same 1.01) so what should i do? I tried to install a official rom from Imate support but it says that it cant be installed in my device ..i even tried the SD backup method but it doesnt work as well and the app (on computer) just hangs even though it shows the table and other allocations.. PLZ HELP!
sephiroth_vg said:
Hey guys i have a Imate k-jam..but its stuck like hell..i mean i tried just about everything i could to get it out of bootloader...whenever i press the power button the phone just automatically goes into bootloader mode..and nothing loads..i tried buttons roms..but it stuck at 98%..den i tried the other rom in a walk thorugh and it upgraded and changed my IPL from 1.01 to 1.06 (SPL is the same 1.01) so what should i do? I tried to install a official rom from Imate support but it says that it cant be installed in my device ..i even tried the SD backup method but it doesnt work as well and the app (on computer) just hangs even though it shows the table and other allocations.. PLZ HELP!
Click to expand...
Click to collapse
u prob. d/c ur cable when you were flashing a rom
this happened to me
the solution for me was to just reflash a rom
Hello,
sephiroth_vg said:
Hey guys i have a Imate k-jam..but its stuck like hell..i mean i tried just about everything i could to get it out of bootloader...whenever i press the power button the phone just automatically goes into bootloader mode..and nothing loads..i tried buttons roms..but it stuck at 98%..den i tried the other rom in a walk thorugh and it upgraded and changed my IPL from 1.01 to 1.06 (SPL is the same 1.01) so what should i do? I tried to install a official rom from Imate support but it says that it cant be installed in my device ..i even tried the SD backup method but it doesnt work as well and the app (on computer) just hangs even though it shows the table and other allocations.. PLZ HELP!
Click to expand...
Click to collapse
Do this:
Step 1. You`re phone is in bootloader mode (3 color screen) ok? Connect your phone to PC.
On Desktop go to My Computer icon -> Right Click -> Select Manage from the list.
Computer Management -> Select Device Manager.
On the bottom of the list you must have Windows CE USB Devices, if it`s there then you`re phone is connected! If you`re phone ain`t connected please right click on Human Interface Devices, and click on Scan for hardware changes!
Step 2. Go to http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades and get the Aku 3 Official ROM and flash it to you`re phone. (T-Mobile UK 3.8.2.1 WWE (AKU 3.3 & 3.0) OS:3.8.2.119 Radio:02.69.11)
In case you don`t have battery more than 50%:
Step 3. Let`s charge it! Phone must be off. Put the charger in... and hold the power button until you`re phone starts charging. It take`s about 10-15 seconds. Max. 30 seconds and some times 1 minute.
If this doesn`t help you, please do this again: http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Regards! & Good Luck!
eXPLOiTeD said:
Do this:
Step 1. You`re phone is in bootloader mode (3 color screen) ok? Connect your phone to PC.
On Desktop go to My Computer icon -> Right Click -> Select Manage from the list.
Computer Management -> Select Device Manager.
On the bottom of the list you must have Windows CE USB Devices, if it`s there then you`re phone is connected! If you`re phone ain`t connected please right click on Human Interface Devices, and click on Scan for hardware changes!
Step 2. Go to http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades and get the Aku 3 Official ROM and flash it to you`re phone. (T-Mobile UK 3.8.2.1 WWE (AKU 3.3 & 3.0) OS:3.8.2.119 Radio:02.69.11)
In case you don`t have battery more than 50%:
Step 3. Let`s charge it! Phone must be off. Put the charger in... and hold the power button until you`re phone starts charging. It take`s about 10-15 seconds. Max. 30 seconds and some times 1 minute.
If this doesn`t help you, please do this again: http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Regards! & Good Luck!
Click to expand...
Click to collapse
the phone doesnt giv any nidication tht its charging...and when i connect it the ruu doesnt detect the phone (it is shown in device manager though)...and my device is CID locked (aka no chnages made to anything since it was bought).. the only indication that its charging is that the mobile gets a bit hot after a while..and i guess that means its charging..
also the upper right hand corner there is ruu or rru written in the corner..(in bootloader)
Hello, Maybe this helps....
sephiroth_vg said:
the phone doesnt giv any nidication tht its charging...and when i connect it the ruu doesnt detect the phone (it is shown in device manager though)...and my device is CID locked (aka no chnages made to anything since it was bought).. the only indication that its charging is that the mobile gets a bit hot after a while..and i guess that means its charging..
also the upper right hand corner there is ruu or rru written in the corner..(in bootloader)
Click to expand...
Click to collapse
ok... if it`s shown in device manager the the phone is detected by the PC that`s in bootloader mode and connected....
If your phone is CID locked... i have to flash to a official IMATE K-JAM ROM.... you can` find some here... http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
And when you try to charge the phone... orange light must apear, if you say that it don`t indicate... then i think it doesn`t charge...
Regards & Good Luck!
man sadly no orange light.....the screen just turns white when i plug it in...sometimes even that doesnt happen...but a VERY RARE (2 times) the red light flashed for just a fraction of a second...and the links for imate roms are dead..i tried access to the ftp site and there is nothing left in the imate folder at all...anyways..i tried to flash the rom from imate website...even that wouldnt flash..says phone not detected..
Hi. Yesterday i installed a new ROM on my touch diamond, after that my touch diamond won't start. And what's weird?? I can go to Bootloader and I can do a hard reset, but i can't connect with PC on bootloader and i can't enter Bootloader with USB Mode...plz help me
Solved !!
LOL. I tried for many times to go to USB Mode Bootloader pushing VOLDOWN+OK+Reset.....when i pushed VolDown and Rest...all done and now i'm flashing my new rom...thanks XDA Forum, Ur the best
i got a problem,after installing Mystery rom i cant start my diamond,when i turn it on,it stay at screen TouchDiamond and i cant do anything...any help? PLEASE!
markos807 said:
i got a problem,after installing Mystery rom i cant start my diamond,when i turn it on,it stay at screen TouchDiamond and i cant do anything...any help? PLEASE!
Click to expand...
Click to collapse
you can imitate the way of qemasoft to make your device go to the boot loader, then you flash back to the official ROM that you can get in http://shipped-roms.com/index.php?category=windows mobile&model=Diamond
hey i need help trying to remove this red triangle when i go to flash recovery it lets me but when i try 2 reboot or whatever it goes to that red triangle my phone is temp rooted i was trying to install the new clockmod version so i can instill gingerbread can somebody please help me this is killing me
Got the same problem
I have a HTC desire HD, and i am totally new to android. According to titanium backup, my phone is rooted but whenever i am try to install a new rom from Rom manager or simple using "Power+Volume" button. It keeps showing up the red triangle. So i really hope someone can help me with this problem.
I am thinking factory reset and work from the bottom. I will really appreciated if someone can show me the steps. Thank.
Need help with red triangle
Can you get to the multi colored ,red,green,blue white horizontal stripes.
With camera ..on .
What hardware,Boot,Loader,Radio lines do you have.
This may help someone workout if it is a problem with any of the above firmware components that may not be instep.
nvm, i need to "back up" in the visionary first before i can install the new rom. Just installed this new rom
http://forum.xda-developers.com/showthread.php?t=858418&highlight=permroot
Thank for the reply anyway.
Ave just installed darky's rom 9.2 all went well phone works well,but when i reboot into recovery mode the texts are in red is this normal or did i do some thing to mess things up,been looking around,there seems two, be blue green and red, depending whats going on in the phone, does red meen something not right with the install ? any help would be gratefull.
phone galaxy s i9000
Thanks Mark204
Nothing is wrong dont worry. I think darkyy themed it red himself.
Sent from my Green Robot Device
Guess you had speedmod kernel before which has green letters, voodoo kernel has red letters
Ok thank's for the reply's did'nt know there was different color in the kernel's,
Sent from my GT-I9000 using XDA App