[Q] Samsung Galaxy S2 No service - Galaxy S I9000 Q&A, Help & Troubleshooting

I've looked for approx, 20minutes on this site and google and I Haven't found the solution so now I'm asking my question.
I've been using information from the website -galaxys2root- (amazingsite in my opinion just slow answers) I've rooted my phone, and installed Resurrection Remix ICS ROM v.1.9.1 and it works terrific, even using SPB Shell 3D.
Now my only problem is that I have no service whatsoever. At first i had service but no internet then i rebooted my phone and had neither afterwards.
Model: GT-I9100
Android Version : 4.0.4
Baseband Version : I9100MUKG2
Kernel Version : 3.0.31 - Siyah - v3.2.4+ [email protected] #32 SMP PREEMPT Thu May 17 17:46:03 EEST 2012
Build Number : IMMI_RR
Mod version : Ressurection remic ICS v1.9.1 by westcrip 4.0.4

This is the galaxy s forum! Try the S2 forum.... hint .......modem
Sent from my GT-I9000 using xda premium

change forums
awww crap sorry i just seen galaxy s I9000 is there a way i can transfer it?

Just change the thread title to oooops, wrong forum.....then post a new one over at S2
Sent from my GT-I9000 using xda premium

my suggestion is go to security, then change the pin code and then go and select the network manually
hope it helps

Related

Can we use ANIDROID KERNEL 3.0.36 with stock ICS 4.0.4

Hello all,
I am really sorry to start thread like this i am new to this, but i serched before and could not find any answer. So starting thread.
I have curretly Anidroid Rom and kernal from Anidroid which i got from here http://forum.xda-developers.com/showthread.php?t=1761190
Now I really liked the performance of this rom, but it dont have s-pen feature, also the inbuilt apps, like dev devloper and other are really no use for me. So i would like to go for stock rom again as samsung is providing ICS 4.0.4 update to another countries.
But for the same performance like this rom, I would like to know can i use this ANIDROID KERNAL 3.0.36 with stock ICS? Also After doing this, will performance reamin same like now?
Also how to do it, I assume i should flash the stock rom, by flashing abyss kernal 1st. and in last i should flash Anidroid kernal, is this right?
One more thing i would like to know, that i am from India So there is no stock update available, then can i use update which is provided for another countries? and which will you recommend as Open Germany, Singapore (SingTel), Singapore or Malaysia?
Or i should wait for update for India?
My current details of mobile.
Model number
GT-N7000
Android version
4.0.4
Baseband version
N7000DDLP4
Kernal version
3.0.36-Anidroid-03-g60af3e5-dirty
[email protected]))
#1 SMP PREEMPT Fri Jul 13 00::33:53 MSK 2012
Thank You.
Anidroid = cm9 = can't use in stock ics.
Sent from my GT-N7000 using xda app-developers app
In theory it's possible... there are no reasons for the principal differences in the Kernel sources between Stock and CM brunches.. It's Linux with Android part of code and Samsung drivers.. but it needs testing for the issues prevents AniDroid and many other CM Source-based kernels working correctly on Stcok ROMs..
novic_dev said:
In theory it's possible... there are no reasons for the principal differences in the Kernel sources between Stock and CM brunches.. It's Linux with Android part of code and Samsung drivers.. but it needs testing for the issues prevents AniDroid and many other CM Source-based kernels working correctly on Stcok ROMs..
Click to expand...
Click to collapse
Really Thank You for reply.
jeet.chaudhari said:
Really Thank You for reply.
Click to expand...
Click to collapse
Theory is sometimes far from reality. I have yet to see a "universal" kernel for N7000 that can do what the OP wants.
Sent from my GT-N7000 using xda app-developers app

[Q] Help me I rooted/unrooted and no 4g!

I rooted my phone using a method from rootgalaxynote with odin and I flashed on TMT 4 jellybean and I became unstable after a few days and started bootlooping and vibrating with black screen so i tried to unroot andnnow i believe its stable i flashed the latest stock rom and then updated to ICS 4.0.4 but now there's no mobile network access. I checked with at&t no fix on their end. my kernel says [email protected] - 64 #3 SMP PREEMPT Mon Jul 16 20:50:37 KST 2012 Please save me! I really want to root and flash some good jellybean multiwindow action but what i REALLY REALLY NEED is for my phone to give me 4g. Honorable xda please help.
Looks like a duplicate thread

[Q] ROM Manager on Galaxy Ace S5830 running CM7

Hey people. I have a Galaxy Ace (Cooper) :
Model number: GT-S5830
Android version: 2.3.7
Baseband version S5830XWKP7
Kernel: 2.6.35.7-perf-CL882825
[email protected] #21
CPU: ARMv6 rev 5
ROM: CyanogenMod-7.2.0-cooper
Build number: GWK74
I am wondering about my device's compatibility with ROM Manager, on the play store it says for samsung you must flash a suitable ROM first, and other people say Ace users should not touch it at all unless you want to risk a brick.
So my question is, on CM7 can I safely use ROM manager without bricking my Ace?
Thanks in advance
Note: I have another question surrounding my WiFi (software issue), if you can help pm me and i will give you details
Take a look at this >
http://forum.xda-developers.com/showthread.php?t=1942957
NO DON'T!!!!!
It will brick your Ace.
Thanks but...
denis022 said:
Take a look at this >
http://forum.xda-developers.com/showthread.php?t=1942957
Click to expand...
Click to collapse
Thanks for replying, I know about that thread, and posted this one knowingly, I ask this because i have used ROM manager once or twice, never for flashing though, fixed permissions and installed a later CMW recovery, and it says on the market for samsung you must flash a compatible rom first, and cyanogen is compat. Also some thread mentions this too....
no title lol
PulseDroid said:
NO DON'T!!!!!
It will brick your Ace.
Click to expand...
Click to collapse
Yes I know, but thanks for your advice

help about XXANA2??

hello guys i'm new with s3 mini I have stock rom . I have rooted my device and flashed only acid audio mood
while i was searching in forum i found something about xxana2 baseband and it's kernel ... is it better than stock in performance and battery life ..and about getting android version 4.1.2 can i get it like officially cause my mob is 4.1.1
Actually we don't really know whats different in that release, but give it a try and see it yourself.
Flash it with custom recovery like CWM.
Ahmed.ragab said:
hello guys i'm new with s3 mini I have stock rom . I have rooted my device and flashed only acid audio mood
while i was searching in forum i found something about xxana2 baseband and it's kernel ... is it better than stock in performance and battery life ..and about getting android version 4.1.2 can i get it like officially cause my mob is 4.1.1
Click to expand...
Click to collapse
best way is try it for you to know whats fit best for you.. im using virginity v9 rom with ana2 baseband and virginity v4 for my kernel
It's much more responsive, more faster and uses lesser RAM compared to older versions of android 4.1.2
A s for the installation, just download this : http://live.samsung-updates.com/details/24398/Galaxy_S_3_Mini/GT-I8190/XEC/I8190XXANA2.html and flash it with odin You'll definitely see the difference.
koragg97 said:
It's much more responsive, more faster and uses lesser RAM compared to older versions of android 4.1.2
A s for the installation, just download this : http://live.samsung-updates.com/details/24398/Galaxy_S_3_Mini/GT-I8190/XEC/I8190XXANA2.html and flash it with odin You'll definitely see the difference.
Click to expand...
Click to collapse
I will try this .. but may i ask if this will effect my network related to region and wifi ,,etc ?
Ahmed.ragab said:
I will try this .. but may i ask if this will effect my network related to region and wifi ,,etc ?
Click to expand...
Click to collapse
I think not as I live in Sofia and everything works perfect
My actual S3 Mini has XXANA2 already into it and i'd like to just root it, but i don't find any tutorial about it (one about root with xxana2 already in it, not even google). Because the 1st time i've tried it ended up with the phone in a reboot sequence
My phone's a:
-Galaxy S3 Mini GT-I8190 (Free, Europe/Spain region!!!!)
-Android Version 4.1.2
-Base Version I8190XXANA2 (<--- THIS, XXANA2)
-Kernel Version: 3.0.31-1514264
[email protected] #2
SMP PREEMPT Thu Jan 30 20:40:02
KST 2014
-Compilation Number: JZO54K.I8190XXANA2
Thanks in advance
DV2FOX said:
My actual S3 Mini has XXANA2 already into it and i'd like to just root it, but i don't find any tutorial about it (one about root with xxana2 already in it, not even google). Because the 1st time i've tried it ended up with the phone in a reboot sequence
My phone's a:
-Galaxy S3 Mini GT-I8190 (Free, Europe/Spain region!!!!)
-Android Version 4.1.2
-Base Version I8190XXANA2 (<--- THIS, XXANA2)
-Kernel Version: 3.0.31-1514264
[email protected] #2
SMP PREEMPT Thu Jan 30 20:40:02
KST 2014
-Compilation Number: JZO54K.I8190XXANA2
Thanks in advance
Click to expand...
Click to collapse
Follow this tutorial
http://forum.xda-developers.com/showthread.php?t=2147852 :good::good::good:

Rooting my galaxy note n7000

Hi I'm new to this and I have looked everywhere on here (the answer prob is in here somewhere) but I can't seem to find what I'm looking for...
Basically I want to flash kernel without PC (if possible) using CWM. I was also hoping to put the latest (stable) CM ROM on it too. I reckon putting a custom rom on would require a PC.
Model number: GT-N7000
Android version 4.1.2
Baseband version : N7000XXLT3
Kernel version: 3.0.31-1103517 [email protected] #3 SMP PREEMPT
Build number : JZ054K.N7000XXLT9
Yes the baseband and build are different (XXLT3 & XXLT9) if that means anything
If anyone can help me I would appreciate it. Either with links or the files attached below I won't mind at all!
Thank you
Neither rooting nor installing a custom rom requires a computer till you have an external sd.
Follow.. To install cm11
Philz kernel -> make backup -> raw kernel -> install rom and gapps
Zeem-93 said:
Hi I'm new to this and I have looked everywhere on here (the answer prob is in here somewhere) but I can't seem to find what I'm looking for...
Basically I want to flash kernel without PC (if possible) using CWM. I was also hoping to put the latest (stable) CM ROM on it too. I reckon putting a custom rom on would require a PC.
Model number: GT-N7000
Android version 4.1.2
Baseband version : N7000XXLT3
Kernel version: 3.0.31-1103517 [email protected] #3 SMP PREEMPT
Build number : JZ054K.N7000XXLT9
Yes the baseband and build are different (XXLT3 & XXLT9) if that means anything
If anyone can help me I would appreciate it. Either with links or the files attached below I won't mind at all!
Thank you
Click to expand...
Click to collapse
Have you already rooted or you want to root and flash a different kernel?
Well neither of those things should require you to absolutely have a PC if you can download stuff onto your device
Also here is a helpful thread on rooting
Something there might help ^^

Categories

Resources