Stock ICS battery drain problem! - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hi everyone!
Yesterday, i was flash Vietnam's stock ICS rom (LP9) on my galaxy note and root.Everythings work fine but then i find out battery drain in this rom is so terrible.i lost 3% in 24' when off screen.So i check by cpuspy to see my note have deep sleep or not. yep. It does deep sleep but in verry low percent.just about 17-20%. I just dont know why. i tried everythings i know. here is what i have done:
1.Full recharge and unplug the cable why screen is on.
2.Airplane mod -> turn off note -> take out the battery for 10'
3.flash other kernel. right now im using speedmod k3-2 beta kernel.
Nothing change !!
When i use litening. my battery last for a day or more with over 5h screen on.but now it just about 6-7 hour with about 3h screen on.
Can someone help me.! And sorry for my bad english.!

could you install BetterBatteryStats to see what wakelocks etc keep your phone awake?
it is most likely that this will help us find the solution together

Aiphares said:
could you install BetterBatteryStats to see what wakelocks etc keep your phone awake?
it is most likely that this will help us find the solution together
Click to expand...
Click to collapse
Thx, but i had find out the reason. Android booster is the problem. too bad that i find out too late. ._. i decided to flash back to gb and got brick.stuck at factoryfs.img all the time :-<.after flash the pit for note 16gb everythings is ok now but i lose about 3gb in usbstorage :-<.
btw, still happy that i can make the note work again
And thx again for ur word

Chanhkun said:
Thx, but i had find out the reason. Android booster is the problem. too bad that i find out too late. ._. i decided to flash back to gb and got brick.stuck at factoryfs.img all the time :-<.after flash the pit for note 16gb everythings is ok now but i lose about 3gb in usbstorage :-<.
btw, still happy that i can make the note work again
And thx again for ur word
Click to expand...
Click to collapse
Where did you get your pit file ?
Maybe you flashed the pit file from the thread where some guy recoverd his Note after brick, and produced a pit file for everyone to download that repartitions the phone, allowing you to re-use the phone but at the cost of a loss of memory space...

Related

Battery Temperature too low!! Charging problem

Hello people,
I have searched a lot on google en XDA to solve my problem, but i can't find it. The temperature of my Samsung Galaxy s GT-i9000 is to low, to be exact -7° degrees.
The problem is that i can't charge my phone now. The phone says: Charging paused. Battery temperature is too high or too low.
Can anyone help me, is would appreciate it a lot!
That's unusual to be honest ^^ , maybe if you put your phone ( or the battery ) in a worm place this problem will be solved , lol i can't even imagine what you've done to make it -7degrees ..
If the temperature of the phone is nrml and you're getting this msg for no reason u can reset it to factory settings , this will probably fix any software problems.
Good luck
i have reset a lot of times my factory settings. Do you have more solutions? (sorry for my English, i speak dutch) Thanks
did u flash any rom?
How old is your phone(battery)
Try a factory wipe,as suggested in the above post,maybe it's an app that caused the prob
I know for sure it's not my battery because had a other battery in it and it said the same. What i was forgotten to say was that my computer recognize my phone as a samsung galaxy, that is really strange. He doesn't want to charge.
Can you manage to get into recovery mode (by clicking vol up+home+power)? If you can, go to "advanced>wipe battery stats", and see if that fixes the problem.
did u flash any rom(kernel) if not,then I think your battery chipset is broken.
If u did flash any rom try format your system in recovery and flash a new rom first from cwm and if this doesn't fix then format again and flash a rom with Odin
Good luck
Yes i can it didn't work. Could a Kernel help me? Or has anyone have a link to rom which could help me?
Stock rom(jvu) get it from sammobile.com or search for darky's rom and flash this through ODIN.if u never tried odin then search and read how to use it
Thanks i'll try to install the darky rom. I tell you if it helps and when it doesn't i tell is also.
Have you flashed custom rom before? If yes try darky or something. If no is your phone still under warranty? If yes don' t flash anything and take it in. If no flash darky or other rom to see if you can resolve issue.
Sent from my GT-P7500 using Tapatalk 2
Thanx ,cos I never heard of this problem before,so it would be nice with a follow up
Hope u will get fixed.
Good luck m8
Sorry m8 it didn't work. I installed the darky rom and the problem is still there. I installed the Rom by CWM recovery. It couldn't work with odin
Could anyone help me with this problem?
Use darky's 10.2 TAR file this is flashable with Odin or any other .tar file.
@RAMAD rooted roms is tar and only flashed in Odin.search ramad
it diden't work. Could it be solved with a secret code or something? I don't think it is a hardware problem because i can connect with my computer.
dubbelr said:
it diden't work. Could it be solved with a secret code or something? I don't think it is a hardware problem because i can connect with my computer.
Click to expand...
Click to collapse
Hi, did you find a solution to the problem? I have the same problem after leaving my phone in a hammock in the rain (probably not the greatest of ideas). The phone works fine, but won't charge the battery. My solution so far was to buy a separate charger to charge the battery (about $10 from Amazon), but if there is a way to stop the battery check that would be much better than having to take out the battery every day to charge it.
Regards,
Svein
svein.berg said:
Hi, did you find a solution to the problem? I have the same problem after leaving my phone in a hammock in the rain (probably not the greatest of ideas). The phone works fine, but won't charge the battery. My solution so far was to buy a separate charger to charge the battery (about $10 from Amazon), but if there is a way to stop the battery check that would be much better than having to take out the battery every day to charge it.
Regards,
Svein
Click to expand...
Click to collapse
I'm having the same issue. It just started yesterday. Even with low use the phone gets hot and it won't let me charge it. I keep getting the battery temperature error. Even when it's powered off. I went into recovery mode as suggested by a previous poster and there is no advanced options that I can see. I'm not rooted and bone stock. Very frustrating. I've also tried another OEM battery to no avail.
HELP! http://forum.xda-developers.com/ima charging paused battery temperature too low
Hello guys, I get that message whenever I charge it or connect it to PC
my phone is galaxy s2 and the ROM is ICS 4.0.4
if anyone can help me. THanks
The problem is in the charge port flex it self. i work for a cell phone repair shop. i fix this issue all the time. its just a trac on the flex that goes bad. easy replacement fix. Here is a link to buy one.
http://www.ebay.com/itm/USB-Charge-...e_Replacement_Parts_Tools&hash=item3a841732e2

Giga Bricked Note.

Today, my Note got extremely bricked, that I could not believe a phone like that could get so easily blown up.
I get this "Firmware update encountered an issue. Please select recovery in Kies and try again." message while it's rebooting every second.
I got this by making a huge mistake, using the re-partition option with the included .pit file, thinking it would factory-wipe the phone before downgrading... well, it didn't. Now, I can't barely access Download Mode or recovery because of, what I assume, low battery. It's charging now and it doesn't look like it. It reboots itself every 5 sec while it's plugged in. Before that, I used the JB leak and began to hate it because of it's damn instability. I wanted the stable, stock, ICS that came with it. I never had any problems like that on Xperia S.
Hell, even Odin can't ****ing save it because of the reboot-problem. I begin to think that, for the first time ever, I have to send this pile of **** back to Samsung and get a new one by saying, Kies ****ed up my phone.
Is there a solution that DOES NOT INVOLVE A DAMN USB JIG for this phone?
If you got the error in kies you could have followed the kies emergency firmware recovery option. Reflashing with a pit file is only for when you have triggered the emmc brick bug is my understanding. Look for the thread with the unbricking guides and hope for best. If not then it looks like service centre...........
Sent from my GT-N7000 using xda app-developers app
LinixAndroid said:
.. I could not believe a phone like that could get so easily blown up.
I got this by making a huge mistake, using the re-partition option with the included .pit file...
Click to expand...
Click to collapse
Did you really read and combine this two sentences? Sometimes people should read the warnings (here about the reasons why NOT to use a pit) and follow them.
But first of all you should recharge the battery outside your device. When you're sure it's "reloaded" try download mode again and install a prerooted Stock Rom (like GB LC1 3-part) and check if you can install and after reboot into a stable device again.
Maybe it isn't so bad forever only for a few hours.
ThaiDai said:
Did you really read and combine this two sentences? Sometimes people should read the warnings (here about the reasons why NOT to use a pit) and follow them.
But first of all you should recharge the battery outside your device. When you're sure it's "reloaded" try download mode again and install a prerooted Stock Rom (like GB LC1 3-part) and check if you can install and after reboot into a stable device again.
Maybe it isn't so bad forever only for a few hours.
Click to expand...
Click to collapse
Wait, I have to charge it outside the phone? What kind of charger only charges the battery outside the phone?
just find someone with the same phone in your neighbourhood and charge in another phone...that's the easiest way..
I have flashed my note multiple times now and it never crossed my mind to use a .Pit file..
By the way, have you thought of leaving the battery out for a few minutes? I got that Firmware issue message before because the power went out while I was flashing my phone from my PC.. Then I just left it out for a few minutes and was able to boot back into dowload mode again
After the emmc brickbug:
The custom pit file may work but trust me after a few moths you going crazy with your phone... it freezes randomly on every rom and wont charge randomly. When you wake up.. phone frozen and battery is on 0% ... i lived 2 weeks with this then i gave it to samsung and they changed the mainboard for free now im happy

[Q] Galaxy Note Bricked / Freezed...

Hello,
I have samsung galaxy note after brick (I had to use pit's to help with brick). Everyhing seems to be okay on gingerbread (sometimes some few secs lags) but when I upgrade to stock xxlsz its freezing. Its freezing very often. Now I was adding google account and phone screen went black and nothing happens. Its connected to the pc and I can access storage but when I disconnect it and connect it I can hear in pc sound that its connected but I cant access memory anymore. Very ofter phone just displays the app that I was using and no touch or button reaction, even when I connect or disconnect charger. So i hold power button till it turn of and turn it on again then its mainly stucking on samsung screen and then reboot and its like that for loooong time. When i remove battery for 5 mins or maybe even less its botting up again but phone is wiped. I mean its asking for everyhing as I would do full data wipe.
I was checking I think every possible stock rom.
I also found this but Im not that good and I dont know what to do with it.
http://forum.xda-developers.com/showthread.php?t=1823918
http://forum.xda-developers.com/showthread.php?t=1667886
Any help would be very, very appreciated.
Thank you.
You have a bricked note with reduced memory. So the freezes are consequence of this. Nothing to solve. You'll have to replace the mainboard for a real solution.
Ok, but I still have 8GB of memory so it should be enough I think so.
If I need to replace mainboard can someone tell me where can I buy it and where is it cheapest?
Daxidov said:
Ok, but I still have 8GB of memory so it should be enough I think so.
If I need to replace mainboard can someone tell me where can I buy it and where is it cheapest?
Click to expand...
Click to collapse
Only way: Samsung Service Center. The mainboards aren't available in the "free" market.
And 8GB isn't enough for JB Roms and even with the slim CM/AOSP ones you'll get the freezes.
Ok,
So if 8GB isnt enough why have I around 6GB free space for my files? Is there any way I can repartition it so system would have whole 8GB and there wouldnt be any lags?
the freezing is mainly because the OS could be still accessing the bad blocks.. run the scanner again to get new start and end and see it you can get a new pit to cover up those
nokiamodeln91 said:
the freezing is mainly because the OS could be still accessing the bad blocks.. run the scanner again to get new start and end and see it you can get a new pit to cover up those
Click to expand...
Click to collapse
Ok.
Can you tell me how can I do this test? And what software need I to use?
Thx
head over to HG42s thread and use the scanners he provided there.. tutorial also there
nokiamodeln91 said:
head over to HG42s thread and use the scanners he provided there.. tutorial also there
Click to expand...
Click to collapse
When I use this on stock PIT using CWM I got brick between 863MiB = 930MB and 3072MiB = 3222MB but when I use same script and do the scan using CMD I get brick between 1023MiB = 1073MB and 15028MiB = 15759MB
When I use the same method but on modified PIT (brick between 00281MB and 03770MB FACTORYFS moved by 03328MiB) using CWM I got brick between 22 = 24MB and 4354 = 4566MB
After I use PIT brick between 00281MB and 03233-MB FACTORYFS moved by 02816MiB which schould be okay Im formating /cach /system /data and Im unable to format /emmc (Error mounting /emmc).
I really dont know what the problem is with.
On stock PIT Im not able to format /data and /emmc with which I got Error mounting /emmc
At last I have used this and its stucked at FACTORYFS nearly at the end.
I have tried to use PIT brick between 00281 and 12092-MB FACTORYFS moved by 11264MiB but even after this Im unable to mount /emmc. I can instal rom but its freezing whole the time.
Any ideas?

[Q] Galaxy Note Bricked After A wrong PIT, is JTAG only way to solve my problem?

Hello guys... Here is the deal:
I tried to manufacture reboot and got stucked at Galaxy Note Logo.
After a few research,I found a "magic solution" telling to I flash a PIT file using ODIN. After that, the N7000 does not power on. It does not go recovery mode or download mode, nor even logo shows up. A time later, I found a lot of threads in this forum talking to don't change PIT without knowing what is doing, but is now too late.
I don't remeber where I found the pit solution, just after I did the change it's I found the xda forum, now my main source is xda but it's a few late.
Well, so, after a lot research, I found a "JTAG" solution. I tried a lot of stuff, and nothing solved
What I what to know is there is just the JTAG way to solve my problem?
Sry for my bad english, and yes, i used a lot of search before creating this topic
First try a charged battery and check if the Samsung logo comes up or not..
nokiamodeln91 said:
First try a charged battery and check if the Samsung logo comes up or not..
Click to expand...
Click to collapse
Thanks for reply
I left him at charger, but no signal,
there is a possibility that the phone is not charging.. so better try a battery that you sure is charged.
nokiamodeln91 said:
there is a possibility that the phone is not charging.. so better try a battery that you sure is charged.
Click to expand...
Click to collapse
Well... I went to a technical, and he solved the problem using the JTAG.... The Galaxy Note came back normally.
Thanks for everything

Battery Drain Issue on every ROM

Hi, I buy a new GT-I9305 a few days ago. It came to me with 4.4.4 XEO. The battery is working excelent on this stock. I decided to root, so I do it. After rooting, I flashed Philz recovery, and flash PAC 4.4.4. The battery is working excelent, too. Two, or three days later I flashed unofficial CM 12. It is alpha, so I want to back to stock. I used ODIN, and firmware from sammobile. After this my battery can drain from 100% to 90% in a few minutes. I tried every custom ROM, nothing works. The issue is only occurs when I using the phone. If the screen off, the battery behaves normally. So, I don't think it's wakelocks. If the synch, GPS, WIFI, and radio are off, still the same issue. What can I do to stop this ? Thanks for any help. Sorry for bad english
Try stock Rom with pit file and factory reset twice.
qasim799 said:
Try stock Rom with pit file and factory reset twice.
Click to expand...
Click to collapse
Where do I find a stock ROM with a pit file? My gf got the same problem on her SGS3 LTE and I would like to help her
Varming said:
Where do I find a stock ROM with a pit file? My gf got the same problem on her SGS3 LTE and I would like to help her
Click to expand...
Click to collapse
Here is the pit http://forum.xda-developers.com/attachment.php?attachmentid=1423031&d=1350946504
And for stock rom go here sammobile.com
Try this
discharge fully.. when phone is 3% or lower or higher so below 10& delete battery stats file..
file is in:data/system/batterystats.bin
then discharge until the phone power off
charge fully without unplug the charger
DO THIS THREE TIMES DURING THIS TIMES YOU MUSTN'T FLASH ANY ROM
if you want change rom do the process with new rom
andreazimba said:
discharge fully.. when phone is 3% or lower or higher so below 10& delete battery stats file..
file is in:data/system/batterystats.bin
then discharge until the phone power off
charge fully without unplug the charger
DO THIS THREE TIMES DURING THIS TIMES YOU MUSTN'T FLASH ANY ROM
if you want change rom do the process with new rom
Click to expand...
Click to collapse
Thanks, I will try it
Skorupa123 said:
Thanks, I will try it
Click to expand...
Click to collapse
It takes more battery than before?
cryogent said:
It takes more battery than before?
Click to expand...
Click to collapse
Deleting battery stats.bin do not solve battery drain issue.it's software or may be a hardware problem
May be buying a new battery can be the solution.
I'm think the solution is Charge Rate. I choosen 1100 mA instead of 1000mA and battery is working very well.

Categories

Resources