Related
Stucked on boot screen (the one that we usually see first with white letters). I did factory reset but I am still stucked on Galaxy S boot screen. I heard the default galaxy S sound but did not see the big 'S'. When I press Volume down + Home + Power , I just see a big triangle which says 'Downloading...do not turn off target'. This means that I can go into the download mode.
I installed odin3 and installed .512 PIT file as well as JH2 firmware from samsung-firmwares website. Inside the JH2 zip file I see a file with extension .tar (I think this goes in PDA section of ODIN).
After connecting my phone with my computer, I see 0:[COM6] in Odin. Plz guide me from hereon. Any help will be much appreciated.
NOTE: I was using gscript o change system fonts. Probably deleted system fonts. Then, I restored back to system and since then phone would not start. Well, it starts but I am stucked on this screen.
I am using Samsung galaxy S vibrant (Bell, canada [GT-I900M])
I will not help because you didn't ask the right question. Please change the title of your thread to something more intelligible or no one will bother.
Bec07 said:
I will not help because you didn't ask the right question. Please change the title of your thread to something more intelligible or no one will bother.
Click to expand...
Click to collapse
Sorry...I will change now
...
Try the same combo but with volume up. Why do you want to connect to kies?
Bec07 said:
...
Try the same combo but with volume up. Why do you want to connect to kies?
Click to expand...
Click to collapse
I am trying to connect to KIES because I think i can reflash using test mode.
Yes..I tried that? Did wipe/factory reset..then rebooted....got the same screen again.
Thanks for replying
EDIT: when I go to recovery menu (Volume up + home + power) and then connect with USB...I can see my device listed by using 'adb devices' command in the cmd prompt.
OK....When I connect my phone to my computer via USB, I can see 0:[COM6] in ODIN. I can go into download mode. I have downloaded JH2 firmware (zip file from samsung-firmwares website). I have Bell Samsung galaxy S vibrant. Can I flash with ODIN.
hay buddy i had exact same problem and this post saved my life... here it is hopfully it will help u out if it does let me know
http://forum.xda-developers.com/showthread.php?t=984140
Hello,
I have flashed my Galaxy Tab with roto JMI, but it's stuck at the "GalaxyTab / Samsung" boot screen.
I can get into download mode with volume down and power, I can reflash it but in the end it does not boot.
What can i do?
loony
*bump* anybody?
Help please!!! I have the same problem!
I am still having this problem. I am wondering if there is any way how to debug whats happening at the Samsung logo screen. With adb the devices is not detected (it seems not to be detected at the usb controller).
What did you use to flash?
What files did you use?
Give all the info so people can help
Sent from my GT-P1000 using Tapatalk
Hi, I have exactly the same problem.
After upgrade du JMI roto with odin 1.7 (all upload seems to be ok, repartition with p1 and pda file Roto-JMI-Full-v2 no error message) but the device hangs on samsung galaxy tab logo and don't boot.
In my case previous version was pda jj3/phone jid / scs jj2
rsmurdoch said:
What did you use to flash?
What files did you use?
Give all the info so people can help
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
Device it GT-P1000 (German/European version)
Bought the device
Got a lot of restarts
Flashed with P1000OXAJM6
Device worked again for some days
Device not booting anymore
Tried reset with different methods (Touch screen, press power; Touch menu button and power button): Sometimes worked, sometimes not
Recently not booting anymore, no trick worked
Flashed Roto Roto-JMI-Full-v2.tar with P1_add_hidden.pit
Device still not starting
Flashed original firmware: GT-P1000_P1000XXJK5_P1000OXAJK5_P1000XXJK5_P1000XXJK5_XX_DBT.zip
Device not starting
Flashed ROTO with Heimdall again (before used Odin only): Device not booting
Thanks!
Same Problem
Im on the SPH-P100, I have the same issue I can access it in Adb the log shows it in stalling all of my old .apks but it never boots past the logo.I have re flashed also but no luck plz help if u can i can post the logcat here but it goes for hrs -_- I assume it loops the process.
loonyt said:
Device it GT-P1000 (German/European version)
Flashed with P1000OXAJM6
Click to expand...
Click to collapse
So, this one contains a bootloader (Sbl.bin). maybe thats the cause of the problem. Still, I wonder why it started in the first place and then after some reboots it gets stuck. I tried different Kernels with no luck. Maybe I should try to flash a new bootloader? However, that could brick the device forever.
Loonyt
loonyt said:
Device it GT-P1000 (German/European version)
Bought the device
Got a lot of restarts
Flashed with P1000OXAJM6
Device worked again for some days
Device not booting anymore
Tried reset with different methods (Touch screen, press power; Touch menu button and power button): Sometimes worked, sometimes not
Recently not booting anymore, no trick worked
Flashed Roto Roto-JMI-Full-v2.tar with P1_add_hidden.pit
Device still not starting
Flashed original firmware: GT-P1000_P1000XXJK5_P1000OXAJK5_P1000XXJK5_P1000XXJK5_XX_DBT.zip
Device not starting
Flashed ROTO with Heimdall again (before used Odin only): Device not booting
Thanks!
Click to expand...
Click to collapse
*bump* Can anybody help?
I have a very similar problem.
I flashed the [ROM] Roto JMI Pre-Rooted Firmware v2 [Feb 4, 2011], and got stuck on the Samsung Boot screen.
Now, I can't even get the Downloading mode to work. It opens fine, but Odin/Heimdall doessn't detect the Tab at all.
Hopefully, someone knows what's going on. If not, I'm taking it back to my carrier, and asking them to fix it (assuming they'll fix it).
Maybe this will help for the bootloader.
Its a bootloader patch. Please read thru the thread. Hope it helps.
http://forum.xda-developers.com/showthread.php?t=888071
Sent from my GT-P1000 using Tapatalk
dlui1 said:
Now, I can't even get the Downloading mode to work. It opens fine, but Odin/Heimdall doessn't detect the Tab at all.
Click to expand...
Click to collapse
Dont get what you mean by that. You cant get it to download mode but your tab start up fine?
Download mode = press vol down + power pn button.
As for odin/heimdall doesnt detect the tab it could be usb port (some reports in android development thread) or could be usb drivers.
As i need to switch usb drivers when i need to flash my tab & my dell streak.
Hope it helps to start you off.
Sent from my GT-P1000 using Tapatalk
Qsilver2001 said:
Dont get what you mean by that. You cant get it to download mode but your tab start up fine?
Download mode = press vol down + power pn button.
As for odin/heimdall doesnt detect the tab it could be usb port (some reports in android development thread) or could be usb drivers.
As i need to switch usb drivers when i need to flash my tab & my dell streak.
Hope it helps to start you off.
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
I meant that I can get into Download mode, with the Downloading logo, but doesn't get detected by Odin. And it stays stuck on the Samsung boot logo if turned on normally. Can't get into recovery either.
Before I flashed the Roto ROM, Odin was working perfectly fine. I've been flashing other kernels and ROMs before. But now, the USB doesn't even seem to get detected. It's like nothing is plugged in. Can't even choose to install/uninstall old/new drivers.
I dont think it's the USB port, as I've tried to connect to Odin on 3 different computers, trying every available port on each. It's looking like the USB connector is just dead or something.
My tabs mainboard was broken, it was replaced and now it works again.
Sent from my GT-P1000 using XDA App
Same problem here man. I CAN get in to download mode. Odin recognize it normally. I CAN download normally. Look likes everything is normal, but after update it restarts, but hangs on Galaxy Tab Samsung logo. I've tryed everything with different firmware, custom-roms, hacking things, but with no success.
Can someone please help me?
Same problem here. My tab is stuck at samsung galaxy logo and until now, no one could provide an answer.
I flashed some ROM from samfirmware that must of locked the bootloader (JMF). Then I tried to flash JM6, JMA, JMC, JMK, JJ4, JJ7, JM5, JJ1, JID and almost all ROTO's. with and without pit files using ODIN 1.7. I also tried a stock ROGERS ROM (that i downloaded from this forum) using Heimdall. The tab always boots to samsung galaxy tab logo. I've done alot of reading in this forum and followed many flashing instructions but when applied, it doesn't work for me.
My main concern: is there still hope with the tab ? or it's gone forever.
Is there any specific order that i must follow when flashing ? ( ie, flash one specific ROM before another). The tab was canadian that was flashed to euro.
Thanks for reading my post.
the dbdata file is corrupted.
1) download this file
http://forum.xda-dev...98&d=1290261479
2) extract it
3) use Odin to flash it under the PDA option
-make sure repartition is UNCHECKED
-do not select any pit file
-leave everything else the same
handfree said:
the dbdata file is corrupted.
1) download this file
http://forum.xda-dev...98&d=1290261479
2) extract it
3) use Odin to flash it under the PDA option
-make sure repartition is UNCHECKED
-do not select any pit file
-leave everything else the same
Click to expand...
Click to collapse
Same prob. tab reboots to samsung logo.
Same Here, I tried many combinations with the help of experts on this board. Conclusion: shipped to Sammy for warranty repair.
I have a big problem! i wanted to flash with Heimdall... I tested a rom, but not satisfied, i wanted to test another one and my Samsung Galaxy Tab don't want to turn on...
No Samsung logo, No Galaxy Tab logo... Nothing! Like the Samsung Galaxy tab don't want to turn on when i push the ON/OFF Button!!!
What can i do???
Please help!
Please HELP!
EmryX said:
Please HELP!
Click to expand...
Click to collapse
If you're able to provide information as to exactly what you did to get your device in this state that would be immensely helpful in regards to diagnosing the problem. However you'll probably be able to recover your device using a custom jig.
I can not be more explicit. I wanted to try a rom. Wasn't satisfied so i downloaded another one (with cache file, database file, bootloader, etc... ) but the file have been dowloaded too quickly (i think the zip file was corrupted...)
So i did the flash, and my tab don't wake up. I don't have a brick state (with the usb and pc logo). I don't have the samsung/galaxy tab logo. Ihave nothing on my screen. Like my on/off button was broken...
And whatever i do(like the combo on/off with the volume down), my computer don't recognize the tab. So i can't flash it again.
EmryX said:
I can not be more explicit.
Click to expand...
Click to collapse
Well you're going to have to be if you want anyone's help.
What files did you flash? Which software did you use? Which version? Were you given errors? How did you flash the files?
Please provide a detailed step by step run-down of exactly what you did.
I can't remember, and i'm french, i can't find the right word to explain the situation...
I flashed my tab with HEIMDALL (the last version on the website) i think the problem is when i wanted to flash with the file EURO.pit (i choose this file in the "bootloader" category of the software HEIMDALL).
The problem... My computer can't recognyze the tab because i can't turn on the tab, so... I don't know what can i do.
EDIT: And HEIMDALL don't tell me any error. Just "Flash Complete, Rebooting"
EDIT 2: I think i used the wrong bootloader...
Up?
What can i do? Is a batterie problem?
Let your Tab charging for 5 Hours and then try again.
Sounds like you've flashed a bootloader not designed for your tablet. Luckily all Galaxy S devices store a backup copy of the secondary bootloader which is utilised when a certain resistance is detected on the USB port. You can send it off to Samsung and they'll repair it, but they might charge you. The other option is to build your own custom jig which will activate the backup secondary bootloader.
now ive got the same problem. i tried a custom recovery i found in the "bible" sticky...clock work wasnt working when i was doing adb commands. the recovery i tried is called 3e. all it would do is reboot, t-mo logo and then bootloader words would flash very quick and black screen (backlit) press the back button and i got the triangle droid.
then i got it to go into download mode and tried a rom with odin this is the rom if it helps
GT-P1000_P1000XXJME_P1000OXAJME_P1000XXJMB_P1000XXJME_XX_ITV.zip.enc
unzipped, selected in pda and clicked start. failed at the last second and the downloading android screen on tab was stuck so i powered it down.
stupid stupid stupid!
now it wont turn on period, i get nothing from usb connection or secret button presses.
ill try the "rig" tomorrow, but how will i hack up this galaxy usb to work? the guide says micro usb but obviously thats for a phone.
please help if you can, i just got this thing today
@Benjamin: I can do a custom jig for a galaxy tab?
EDIT: But i don't think the jig will help me..
"If your phone screen is always black, that is it does not display the white Galaxy S/Samsung/AT&T logo when you switch it on, then sorry, this jig will not help you. "
HELP please? Can i do a custom jig for the galaxy tab? And How?
press and hold the power button for 10 second make sure it totally off
then try to enter download mode
if u are able to enter download mode
flash roto jme v4
if it a battery problem
i think it may be battery flat, try plug it in to the charger see if it work after 10 min
suprajztwenty said:
now ive got the same problem. i tried a custom recovery i found in the "bible" sticky...clock work wasnt working when i was doing adb commands. the recovery i tried is called 3e. all it would do is reboot, t-mo logo and then bootloader words would flash very quick and black screen (backlit) press the back button and i got the triangle droid.
then i got it to go into download mode and tried a rom with odin this is the rom if it helps
GT-P1000_P1000XXJME_P1000OXAJME_P1000XXJMB_P1000XXJME_XX_ITV.zip.enc
unzipped, selected in pda and clicked start. failed at the last second and the downloading android screen on tab was stuck so i powered it down.
stupid stupid stupid!
now it wont turn on period, i get nothing from usb connection or secret button presses.
ill try the "rig" tomorrow, but how will i hack up this galaxy usb to work? the guide says micro usb but obviously thats for a phone.
please help if you can, i just got this thing today
Click to expand...
Click to collapse
almost the same thing happened to me. how ever mine will not turn on at all. it gets warm when it charging and then cold when the battery is dead. i have it sitting until it drains.
i am waiting to hear from Samsung. I will keep you posted.
Can anyone out there help. I tried to load overcome's rom and it passed all the steps, and then the screen just went dead
Try to power on together with volume down bro. Lets see if the android image with broom will pop.
Sent from my GT-P1000 using XDA App
Hiya guys,
Just tried to flash my Galaxy S i9000 to Froyo following Virnik0's post here:
http://forum.xda-developers.com/showthread.php?t=818556
After doing the first part of the process Odin said 'reset' and then said '1 success/0 failed'
I then tried to go to step 8 but the phone wouldn't reboot itself. I was able to get it into Download mode so I just continued all the way to step 17.
Again it didn't reboot itself.
Now nothing is working.
When USB is connected it just shows the loading circle again and again.
With USB disconnected it just shows the Samsung Galaxy in white logo again and again.
I am able to get it into Download mode.
However I am unable to get it into Recovery mode.
Any help to get this baby working again would be greatly appreciated.
Thanks
Reflash following instructions in Block 2 method via Odin .from your link .
Dont go as far as step 9 .
jje
Hello everyone!!! Noob here! So, I'm having a really bad problem... My SGH-T599N (or Samsung Galaxy Exhibit from MetroPCS) has been bricked. Long story short, after finding out nothing works and stumbling upon Odin3 v3.07, I plugged my phone in (in Download Mode) and loaded a [.tar] folder in the[PDA] criteria, pressed start, and all that was shown was...
View attachment 2946077
Nothing else happened, so I unplugged my phone, pressed power button, but only the Black Screen of Death shows (says "Firmware Upgrade Encountered An Issue. Please Select Recovery Mode In Kies & Try Again"). Now, I downloaded Kies, but the problem with this phone is... THERE IS NO SERIAL NUMBER! I looked on the back in the phone, not there. I looked on the battery, and there it is! But.... It doesn't work (either that or it's not it, though it has "S/N:" and the numbers by it, but it still doesn't work). No now, I'm just in a terrible place. Plus, if I press Down Volume + Home + Power, I can still go into Download Mode, but I still have no idea where to go from here and what to do. Somebody please help me!!!
TerrBear94 said:
Hello everyone!!! Noob here! So, I'm having a really bad problem... My SGH-T599N (or Samsung Galaxy Exhibit from MetroPCS) has been bricked. Long story short, after finding out nothing works and stumbling upon Odin3 v3.07, I plugged my phone in (in Download Mode) and loaded a [.tar] folder in the[PDA] criteria, pressed start, and all that was shown was...
View attachment 2946077
Nothing else happened, so I unplugged my phone, pressed power button, but only the Black Screen of Death shows (says "Firmware Upgrade Encountered An Issue. Please Select Recovery Mode In Kies & Try Again"). Now, I downloaded Kies, but the problem with this phone is... THERE IS NO SERIAL NUMBER! I looked on the back in the phone, not there. I looked on the battery, and there it is! But.... It doesn't work (either that or it's not it, though it has "S/N:" and the numbers by it, but it still doesn't work). No now, I'm just in a terrible place. Plus, if I press Down Volume + Home + Power, I can still go into Download Mode, but I still have no idea where to go from here and what to do. Somebody please help me!!!
Click to expand...
Click to collapse
I will recommend you to search in here: http://forum.xda-developers.com/exhibit-4g
You can try and flash a stock firmware via odin, since you are able to get in download mode. Firmwares for your specific phone may be found here: www.sammobile.com
TerrBear94 said:
Hello everyone!!! Noob here! So, I'm having a really bad problem... My SGH-T599N (or Samsung Galaxy Exhibit from MetroPCS) has been bricked. Long story short, after finding out nothing works and stumbling upon Odin3 v3.07, I plugged my phone in (in Download Mode) and loaded a [.tar] folder in the[PDA] criteria, pressed start, and all that was shown was...
View attachment 2946077
Nothing else happened, so I unplugged my phone, pressed power button, but only the Black Screen of Death shows (says "Firmware Upgrade Encountered An Issue. Please Select Recovery Mode In Kies & Try Again"). Now, I downloaded Kies, but the problem with this phone is... THERE IS NO SERIAL NUMBER! I looked on the back in the phone, not there. I looked on the battery, and there it is! But.... It doesn't work (either that or it's not it, though it has "S/N:" and the numbers by it, but it still doesn't work). No now, I'm just in a terrible place. Plus, if I press Down Volume + Home + Power, I can still go into Download Mode, but I still have no idea where to go from here and what to do. Somebody please help me!!!
Click to expand...
Click to collapse
Don't know if you still need help but assuming you never replied to the other person's post eh I'm assuming you figured it out. If you didn't though I should first say that the galaxy exhibit 4g and the galaxy exhibit are two different phones. Also the official stock firmware for our phone hasn't been released by samsung for some reason so there's no way to go back to complete stock unless you make a backup. Here's a link for a pre-rooted stock rom though that you can flash through odin http://forum.xda-developers.com/showthread.php?t=2489238
Same Problem here but I am not sure how to use ODIN ?
Mr. Clown said:
I will recommend you to search in here: http://forum.xda-developers.com/exhibit-4g
You can try and flash a stock firmware via odin, since you are able to get in download mode. Firmwares for your specific phone may be found here: www.sammobile.com
Click to expand...
Click to collapse
I am having such a hard time getting My SGH-T599N to activate and I need the stock Rom Because I wiped my Android all ready. It can reach Download and even recovery but I think that it Needs the stock Firmware. I wonder if you have found the Solution yet?
[email protected]......... thank you so much
Wolf.eagle1957 said:
I am having such a hard time getting My SGH-T599N to activate and I need the stock Rom Because I wiped my Android all ready. It can reach Download and even recovery but I think that it Needs the stock Firmware. I wonder if you have found the Solution yet?
[email protected]......... thank you so much
Click to expand...
Click to collapse
Have you searched in the links above?