Sorry to disturb you, but I hope that your knowledge can help tremendously.
I have a Samsung Galaxy Note GT N7000 . Yesterday I put new software in the work of the mobile phone "froze".
After that I reset (Volumen down+meni+power ) and with Odin tried to put multiple versions of the OS, but each time the installation would be stopped somewhere before the end.
PLEASE HELP!
jasmine
there is a brick bug in the official and leaked kernels. You might be a victim please read up more.
And did you wipe before flashing?
yes, with AbyssNotekernel42CWTouchOriginalLogo
jbojic3 said:
yes, with AbyssNotekernel42CWTouchOriginalLogo
Click to expand...
Click to collapse
Another Brick case my friend ...
Clarify on which ROM and kernal you were from to which ROM and kernal you were expecting to go to?
And by what methods?
Sent from my GT-N7000 using Xparent ICS Tapatalk 2
Should have read more before flashing this kernel.
Flashed AbyssNotekernel42CWTouchOriginalLogo on my Samsung Galaxy Note GT-N7000 and now it is not booting. I was on Stock ROM Rooted and stock kernel. Flashed using latest CWM Touch I could find (have used same CW zip for some other stuff worked fine). I did not remove any thing.
Any Advice please?
Can you boot into recovery? Install a different kernel.
What rom were you on?
Flash stock rom using pc Odin
Valium10 said:
Flashed AbyssNotekernel42CWTouchOriginalLogo on my Samsung Galaxy Note GT-N7000 and now it is not booting. I was on Stock ROM Rooted and stock kernel. Flashed using latest CWM Touch I could find (have used same CW zip for some other stuff worked fine). I did not remove any thing.
Any Advice please?
Click to expand...
Click to collapse
Make your own topic instead of digging up an old one...
Sorry for digging up an Old one, but when I searched topic was already here so ,,,,,,,, If I ever get in such trouble again I will do so.
I was able to boot in CWM (ROM Manager) and had a backup copy of my ROM (did it few days ago and left it in original folder), decided to use that.
And I am happy my GT-N7000 just booted again. Now All I have to do is just make the changes again I did in past 7 days.
Thank you for responses. Respects. :victory:
you said you are rooted and on stock kernel. move to a kernel like philz / hydracore / speedmod to avoid the risk of brick bug. also restoring nandroid backups on stock kernel can be dangerous. so change the kernel to safe one and make a new backup.
glad you go it fixed
Done
now my kernel is 3.0.15_Hydracore_v7
Related
hi there,
first off, im sorry for being a total noob.
i was trying to look for a full guide to install Criskelo ICS ROM v2.
i found an online guide from the site rootgalaxynote dot com
but its for the older version.
i was wondering if i can do this step but install using the V2 or follow the steps, install the older version then use clockworksmod to load v2?
once again, please accept my apologies as i have never touched an android in my life.. im so new, my note is still in the mail and i havent even received it yet.
Go the the development section find criskelo v2 and follow the instructions in the first post? Why go to another site when the instructions are right here
.....
Sent from my GT-N7000 using Tapatalk 2
hi there,
i was there, the thing is that i want to make sure i understand the instructions the instructions
From GB:
Install ics repack by chainfire via mobile odin-reboot-reboot into revovery-full wipe-install criskelo ics.
Click to expand...
Click to collapse
so before i run the steps above, i should install clockworkmods and titanium backup to backup my current rom and apps rite?
then i download the ics repack by chainfire and the criskelo v2 mod
then install mobile odin and install the mod?
Very simple as ABC.
First you use PC odin and flash a single file called chain fire repack.tar
This ROM is already rooted.
Boot up and install triangleaway1.25.apk
Copy your ROM to SDcard
Reboot to recovery using the CWM app in Your note
Wipe data.factory reset wipe the other one below the list. I forgotten the name
Wipe devalik cache from advance settings
Install the zip file called Criskelo or any other ROM from Sdcard.
Once you are done reboot and enjoy your new rom.
Sent from my GT-N7000 using XDA
gtee said:
Very simple as ABC.
First you use PC odin and flash a single file called chain fire repack.tar
This ROM is already rooted.
Boot up and install triangleaway1.25.apk
Copy your ROM to SDcard
Reboot to recovery using the CWM app in Your note
Wipe data.factory reset wipe the other one below the list. I forgotten the name
Wipe develik cache from advance settings
Install the zip file called Criskelo ROM from Sdcard.
Once you are done reboot and enjoy your new rom.
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
GREAT!! thats the best information i've got so far... thank you kindly....
i really appreciate it...
one more question, by following the instructions above, will the phone be overclockable? (just wondering.. doesnt matter if it doesnt..)
vyraz said:
GREAT!! thats the best information i've got so far... thank you kindly....
i really appreciate it...
one more question, by following the instructions above, will the phone be overclockable? (just wondering.. doesnt matter if it doesnt..)
Click to expand...
Click to collapse
No, you can't overclock any of the ICS kernels for the time being.
chasmodo said:
No, you can't overclock any of the ICS kernels for the time being.
Click to expand...
Click to collapse
i see.. ok.. no prob.. dont really need that much juice anyway.. for now that is...
do you guys recomend i root my GB in stock condition then backup with CWM first? just so i can revert much later on in case bad stuff happens?
always make a backup incase of anything going wrong
gtee said:
Very simple as ABC.
First you use PC odin and flash a single file called chain fire repack.tar
This ROM is already rooted.
Boot up and install triangleaway1.25.apk
Copy your ROM to SDcard
Reboot to recovery using the CWM app in Your note
Wipe data.factory reset wipe the other one below the list. I forgotten the name
Wipe develik cache from advance settings
Install the zip file called Criskelo ROM from Sdcard.
Once you are done reboot and enjoy your new rom.
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
This does however increase the binary counter thus voiding warranty. By taking some extra steps you'll be able to upgrade to any ICS rom without increasing the binary counter.
What I did was I flashed one of the pre-rooted roms found in a thread in the dev section. After that I flashed the CF Root kernel for the rom I installed (I used the pre-rooted LA6 rom so I used the CF kernel for LA6).
Now you have full root and CWMR so you can flash any rom you like. For ICS roms, install Mobile Odin, flash the ICS LP1 repack, reboot to recovery, do a full wipe and install any ICS rom you want to try.
Pre-rooted stock roms: http://forum.xda-developers.com/showthread.php?t=1535025
For CF-Kernel check step two "2. I Want ROOT + CWM" of this thread and download the appropriate files for the pre-rooted kernel you flashed: http://forum.xda-developers.com/showthread.php?t=1329360
This is what triangle away is for.
Resetting the counter to none!
Sent from my GT-N7000 using XDA
gtee said:
This is what triangle away is for.
Resetting the counter to none!
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
thats what i was thinking...
gtee said:
This is what triangle away is for.
Resetting the counter to none!
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
To my knowledge Triangle Away only does exactly what is says, it will remove the yellow triangle after you've flashed a custom kernel through pc Odin and thus having triggered the binary counter. To my knowledge Triangle Away is not able to reset the counter though I could be wrong as I've never used it myself. There is however a thread explaining how to remove both the triangle and reset the counter using a usb JIG: http://forum.xda-developers.com/showthread.php?t=1354888
Counter is reset
using triangle away does reset the counter as well as removing the triangle also says your rom is samsung original even if it is not!.
you must use the correct ics version to do this one that does work is I9220LP1-N7000-ICS-REPACK worked just fine on my note. It does not work on all current versions of ICS. enjoy
Thanks a lot for the info! I really didn't know and I thought I read somewhere that it didn't reset the counter.
does the triangle away work for GB phones? just wondering
No
Sent from my GT-N7000 using XDA
Other way you could try
Hi, maybe you already flashed, but this is how I did it. No problems at all.
Starting from stock GB. (Or you can flash stock through ODIN)
Used CF-Root to get Root and CWR on the phone.
Downloaded and flashed Abyss Kernel 4.2
rebooted recovery
flashed ICS ROM from sdcard.
Worked perfectly well for me.
Hope this helps.
rupalazzi said:
Hi, maybe you already flashed, but this is how I did it. No problems at all.
Starting from stock GB. (Or you can flash stock through ODIN)
Used CF-Root to get Root and CWR on the phone.
Downloaded and flashed Abyss Kernel 4.2
rebooted recovery
flashed ICS ROM from sdcard.
Worked perfectly well for me.
Hope this helps.
Click to expand...
Click to collapse
i see... so ics will work on the abyss 4.2 rom? cool...
sadly... i havent been able to do anything on my phone... it hasnt arrived yet.. and yesterday i got a call from the provider saying its gonna EVEN more delayed
vyraz said:
i see... so ics will work on the abyss 4.2 rom? cool...
sadly... i havent been able to do anything on my phone... it hasnt arrived yet.. and yesterday i got a call from the provider saying its gonna EVEN more delayed
Click to expand...
Click to collapse
As soon as you flash the rom, abyss kernel will be overwitten (you get CWM).
Now a piece of advice, there are great risk on flashing any rom based on leak repack, there is an issue with the kernel and the eMMC, which basically can fry your phone (if you are unlucky).
I personally decided to flash back to stock GB.... just in case. I'm not willing to gamble with my note, but that is me.
Sent from my GT-N7000 using XDA
rupalazzi said:
As soon as you flash the rom, abyss kernel will be overwitten (you get CWM).
Now a piece of advice, there are great risk on flashing any rom based on leak repack, there is an issue with the kernel and the eMMC, which basically can fry your phone (if you are unlucky).
I personally decided to flash back to stock GB.... just in case. I'm not willing to gamble with my note, but that is me.
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
thanks for the input... was kinda thinking that while doing alot of reading... im still considering a GB rom or an ICS rom
So I came from ICS stunner to stock ICS WITH cf-root kernel using mobile Odin pro, it's working fine but it's not nearly as good as stunner our even rocket ROM v23....basically with all the scare stories about bricking when using cwmr to restore or wipe, etc should I wait for something new our just try to restore my backup?????
Any advice greatly appreciated thanks
martyj999 said:
So I came from ICS stunner to stock ICS WITH cf-root kernel using mobile Odin pro, it's working fine but it's not nearly as good as stunner our even rocket ROM v23....basically with all the scare stories about bricking when using cwmr to restore or wipe, etc should I wait for something new our just try to restore my backup?????
Any advice greatly appreciated thanks
Click to expand...
Click to collapse
As of now donot use CWM.Avoid it completely.Stock ICS with root doesnot make any problem.Its the CWM which causes bricks...If you need,you can flash the rom again using mobile odin with inject su,ever root,and inject mobile odin options ticked but donot flash cf-root kernel.
In genneral, just dont do anything in the recovery, cf or stock. There is one possible brick case from wiping in stock recovery. If you want to be safe, use PC odin to flash back to GB and wait for futher clerification.
Sent from my GT-N7000 using Tapatalk 2
liltennisdudexx said:
In genneral, just dont do anything in the recovery, cf or stock. There is one possible brick case from wiping in stock recovery. If you want to be safe, use PC odin to flash back to GB and wait for futher clerification.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
As of now problem was reported with CWM only.Stock recovery is safe for your info
vijai2011 said:
As of now problem was reported with CWM only.Stock recovery is safe for your info
Click to expand...
Click to collapse
That's not correct. At least one user hardbricked when doing a reset from stock Recovery.
I was in the exact same position as the OP.
But, and there is a capital But - I never used CWM.
I recovered using PIT and a GB Stock ROM.
Edit: Sorry posted in the wrong thread - Was so excited because I recovered my Note.
Thanks for the feedback
Thanks guys,
currently running rocket lpy v1, just flashed over stock ics with no wipe, all running fine now, may give stunner another go - not really finding much benefit from samsung only junk.
Thanks again, loving the note, loving the forum and loving the diversity - never get tired of my mobile again!!!!
Today I tried to update my phone to a new custom rom.
I followed the instructions of the threads and tried to get it to work.
Of course it didn't work or else I wouldn't be here right now asking for help.
Here's the current situation.
I am able to boot into download mode + recovery mode and also boot into cwmr and install a different kernel.
I used pc odin to install it each time and it does pass and the rom (i've tried installing a gingerbread rom so that I can try everything again) does install.
the problem is that it is currently stuck in a boot loop at the "Samsung galaxy note gt-N7000" screen.
I have looked up dr.ketan's posts and tried some too.
currently i am booting abyss note kernel 42cwt touch original. (I know for sure it is a workable kernel because I've been using it this whole time.
here's what i've done. please tell me what i've done wrong and the possible ways to reverse it.
1. backed up everything
2. went into recovery
3. factory reset/cache clear
4. use pc odin to install new kernel (since I was looking into switching to another kernel anyways)
5. use pc odin again to install gingerbread rom (I do get the green light saying it did get installed
6. phone auto reboots
7. it gets stuck at the boot loop like i have mentioned above
i will try to attach a few pictures of my note as soon as I can so you can see what's going on with it.
What rom is there on the phone now ? if you boot into recovery .. what recovery do you get now ? CWM or stock ardroid 3e recovery ?
nokiamodeln91 said:
What rom is there on the phone now ? if you boot into recovery .. what recovery do you get now ? CWM or stock ardroid 3e recovery ?
Click to expand...
Click to collapse
Right now it reboots to 3e recovery.
The rom that I tried to inject to it is currently a the stock gingerbread rom from dr. Ketans thread.
The rom that I had on it is the official ics rom for the hk region.
The rom that I wanted to inject to it was a custom jb rom that uses hydracore as a kernel.
Thanks!!
try installing a prerooted Gb rom or an ICS stock rom using PC odin.. if you choose ICS, after flash install a safe kernel..
nokiamodeln91 said:
try installing a prerooted Gb rom or an ICS stock rom using PC odin.. if you choose ICS, after flash install a safe kernel..
Click to expand...
Click to collapse
If I do a stock ics update can I just do it through kies or do I have to do it through pc odin? Also. Would abyss or hydracore considered as a safe kernel???
yes if kies can do it then good but at this situation i dont think. its better to use PC odin for now. yes both are safe kernels
nokiamodeln91 said:
yes if kies can do it then good but at this situation i dont think. its better to use PC odin for now. yes both are safe kernels
Click to expand...
Click to collapse
I've tried your suggestions...and it didn't seem to work out too well.
I am able to flash to different kernels and get in and out of different recovers and such, but ya...still no luck with running a rom.
Well I am not sure but I soft bricked my phone when I tried that Abyss Kernel. In my view Hydracore is safe. Philz is super safe.
Flash ICS which matches your region using Odin. If phone boots flash Philz, If not, then be ready to read a lot of stuff or get phone repaired.
asian_boi said:
I've tried your suggestions...and it didn't seem to work out too well.
I am able to flash to different kernels and get in and out of different recovers and such, but ya...still no luck with running a rom.
Click to expand...
Click to collapse
instead of flashing kernels. flash a complete rom using PC odin.
nokiamodeln91 said:
instead of flashing kernels. flash a complete rom using PC odin.
Click to expand...
Click to collapse
You have so much patience
Sent from my Amazon Kindle Fire using Tapatalk 2
the only thing i have...
Hey guys. my note seems to have cooperated and allowed me to flash a new rom and also a new kernel. Here's the catch though, now it's stuck in the samsung logo and won't boot beyond that. Any suggestions of what to do? I am continually searching on the forums to find a solution.
At least I'm happy to know it's not a brick that can't be fixed.
Thanks nokiamodeIn91 for your help so far. I really appreciate it.
which rom did you flash and which kernel? how?
He spent a lot of time helping you. Be sure to hit thanks button
Sent from my GT-N7000 using Tapatalk 2
I currently flashed the abyss note kernel 42 cw touch and I downloaded an old gb rom from sammobile .
Here's what I did.
1. Put my phone into download mode
2. Run as admin on PC Odin
3. Selected the Abyss kernel then flashed it.
4. Boot into the cmw, wiped cache then booted the phone into download mode again.
5. Then I installed the old GB Rom on to my phone and restarted it.
6. Phone starts, loads past the GT-N7000 logo and goes into the samsung boot logo.
7. Phone repeats the animation of the samsung logo a time or two then restarts on its own. This loops until the phone is completely drained. I know that the rom works because that was the rom that I used to root my phone. I definitely don't mind downloading another rom if I have to.
my current goal, if we can fix this, is to quickly just update to the official jb rom for n7000 and not play around with the rooting and such until I have even more time to learn more.
at least I know for sure my phone isn't hardbricked, I would imagine I have either missed a step or something that caused the problem.
I have read through the forum and I did come across one post talking about checking my phone's partition and such.
I got to be honest, I'm really not technically skilled enough at this point in time to dare to mess around with that type of thing yet especially with so much coding to make sense of it. (I know this is kind of dumb to say especially when I rooted my phone and screwed up this bad). More importantly, I don't even know for sure if I need to do a partition or not.
Please let me know what I did wrong and how I can fix it.
I got a question though (out of curiosity), how come there's no toolkit for the n7000 like the S3 and also the note 2???
this is the name of the old gb rom that I tried flashing.
N7000ZSKJ6_N7000OZSKJ6_N7000XXKJ6_HOME.tar
I actually have tried several other roms as well (from GB-JB, official and custom) and all of them so far has gotten to the samsung boot logo
I have read on the forums to try using Philz-cwm 6 kernel but I don't know if it'd solve my problem.
let me show you one of the threads I have read, if I dived into the wrong material let me know and I won't consider using it (or learn how to use it) for my current situation
http://forum.xda-developers.com/showthread.php?t=1661590&highlight=samsung+logo+bootloop&page=2
like I was saying before, I really have no experience in coding so all the things that really made near no sense to me. I understand the basic concept of what its trying to do it's just seems like a very unsafe method for me to try especially when I lack the necessary knowledge in this area of expertise.
did you flash the GB rom using the standard PIT file ?
also you could try with the 5 file flashing method from this thread
http://forum.xda-developers.com/showthread.php?t=1530501
Hello..
Why are you only wiping cache.
You should have done a factory reset on that step.
Sent from my GT-N7000000000 using Tapastalker 2
asf58967 said:
Hello..
Why are you only wiping cache.
You should have done a factory reset on that step.
Sent from my GT-N7000000000 using Tapastalker 2
Click to expand...
Click to collapse
Yeah true... should also format system..
**** if you can boot into recovery , do a facotry wipe now
Hi guys,
I have a big problem and hope that someone can help. Today i rooted my note and i proceed in updating my kernel(used GL_HYDRACORE_v7_STD with mobile odin pro). After i flashed it my phone won't boot i can only see samsung galaxy note and that's it.
What can i do?
Thanks in advance.
You have to be more specific and give details.
What was the rom and kernel when your phone was okay.
How you did the rooting.
Did you confirm rooting.
Did you try to flash any other rom or just kernel.
Are you able to go to recovery and/or download mode.
Sent from my GT-N7000 using xda premium
dsmas said:
You have to be more specific and give details.
What was the rom and kernel when your phone was okay.
How you did the rooting.
Did you confirm rooting.
Did you try to flash any other rom or just kernel.
Are you able to go to recovery and/or download mode.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Phone was on stock 4.0.4 i think, haven't flashed any other rom.
Root was oke rooted from recovery with Root_SuperSu 0.95
root was confirmed with root checker
i can go to recovery vol up + home + power
Until now brick isn't confirmed here. Think positive.
Alternatives:
In recovery: restore a backup - if you made one.
In recovery: install philz kernel, reboot into recovery, install a Custom Rom
In download mode: install a Stock Rom oder a prerooted Rom with PC Odin
Then we continue with analyzing - if not already solved then.
ThaiDai said:
Until now brick isn't confirmed here. Think positive.
Alternatives:
In recovery: restore a backup - if you made one.
In recovery: install philz kernel, reboot into recovery, install a Custom Rom
In download mode: install a Stock Rom oder a prerooted Rom with PC Odin
Then we continue with analyzing - if not already solved then.
Click to expand...
Click to collapse
i am new to android so i need a detailed tutorial on how to do these things.
Didn't make backup.
Well there are very detailed guides here http://forum.xda-developers.com/forumdisplay.php?f=1346&nocache=1 Just take your time.
1:- search for speedmod kernel (as Philz needs information to match your ROM), connect your Phone to PC and see if you can put that zip on SD card. then boot your phone in recovery Vol up etc and flash that zip.
reboot recovery and wipe data Factory reste and dalvik. reboot phone and hope it works.
If not then from same forum find a suitable ICS/GB rom and flash it using PC Odine. detailed giud and downloads are in same thread.
BTW. This galaxy note I have is my first Android phone and I have not only soft bricked it once and recovered, but also have flashed 7 different roms my current rom is 4.1.2 JB. And I did all this just by reading these forums. you check my post count. So my suggestion is take your time, search for correct threads and trust me there are more than enough people here to help.
You are right. I have flashed several ics and leaked jb custom roms and note is my first smart phone. Believe me, not even a soft brick. All because reading in details of this forum, before doing anything.
Sent from my GT-N7000 using xda premium
as already suggested by ThaiDai
In download mode: install a Stock Rom oder a prerooted Rom with PC Odin
Click to expand...
Click to collapse
follow the above step to get back to where you were initially and then start again..
Thank you guys for all your help.
Solved. Used 4.1.1 JB official rom and updated. Now working just fine.
:good::good::good::good::good:
TeCHnO4EveR said:
Thank you guys for all your help.
Solved. Used 4.1.1 JB official rom and updated. Now working just fine.
Click to expand...
Click to collapse
There is another way to say thanks, hit the thanks button for the guys who helped you.
Sent from my GT-N7000 using xda premium
Hi Peeps, Happy New Years
Don't Worry I read every thread on XDA and no one has a problem as similar as mines and don't know EXACTLY what type of brick I have.
I got this problem with my Galaxy Note (N7000):crying:
It all started when I was running Ultimate Rom v6 and decided to upgrade to kitkat.
I searched around and found that Spirit Rom had quite positive reviews.
So I downloaded the rom and tried to flash but then ended up with status 7 error.
I then found out I was using an outdated version of CWM (I think it was 6.0.3.7)
I then flashed this file by zedomax (http://downloadandroidrom.com/file/GalaxyNote/recovery/n7000-CWM-KitKatCompatible.zip)
because it had compatible recovery with Kitkat roms and CM 10.2 kernal. Installation went fine and I set up everything.
I then installed lollipop theme (It came with boot animation). Then I rebooted to see how the boot animation looked but to my despair I got stuck at Samsung Boot Logo Screen and couldn't get past it. I couldn't get into recovery, only downloading mode. So then I flashed stock JB rom with PC (Odin). The flashing was successful but I'm still stuck at Logo screen.
Also I would like to also mention that the phone was NEVER on ICS. It was on stock GB 2.3.6, then rooted and flashed Ultimate Rom V6.
Any help would be appreciated :highfive::victory:
GD people. Read. Go to the how to install a KitKat ROM thread.
Sent from my GT-I9205 using Tapatalk
AndroidSlave said:
GD people. Read. Go to the how to install a KitKat ROM thread.
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
@AndroidSlave
Calm down dude!
I read the thread properly.......
Unfortunately something went wrong and I'm asking for help (I really don't even know how I messed it up).......
Do you have a problem with that?
I have experience with rooting and custom roms and have never came across something like this.....
007Uzzi said:
@AndroidSlave
Calm down dude!
I read the thread properly.......
Unfortunately something went wrong and I'm asking for help (I really don't even know how I messed it up).......
Do you have a problem with that?
I have experience with rooting and custom roms and have never came across something like this.....
Click to expand...
Click to collapse
If the last thing you did was flash 4.1.2 via PC Odin then flash the correaponsing philz kernel in PC Odin, boot to recovery, and do a factory reset. If you don't want stock TW, then do the above, and then follow the guide on how to flash a KitKat ROM. I feel your error may involve not doing proper wipes, including preload.
Sent from my GT-I9205 using Tapatalk
AndroidSlave said:
If the last thing you did was flash 4.1.2 via PC Odin then flash the correaponsing philz kernel in PC Odin, boot to recovery, and do a factory reset. If you don't want stock TW, then do the above, and then follow the guide on how to flash a KitKat ROM. I feel your error may involve not doing proper wipes, including preload.
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
Thanks Dude , You helped think of of something
BTW I fixed it
Maybe my recovery was corrupted or something...... So I was browsing around sticky threads an somehow reasoned it out to flash a prerooted + cwm rom through odin.
This is what I did:
1. Download this http://d-h.st/HJM
2. Flash with PC Odin (Add via PDA button and make sure ONLY Auto reboot is checked)
3. Wait till completed
4. When completed you will still get stuck then....
5. Boot into recovery (Which will now be CWM)
6. Do a factory reset and wipe cache and dalvik cache
7. Reboot
8. Give the logo screen a minute or two
9. Then I get directly to welcome screen.
10. Done
One more thing is do you know what was the cause of this? It's really interesting to know...........
Yeah improper wipes or flashing the wrong kernel for the wrong rom
Sent from my GT-I9205 using Tapatalk