Database Develop

Rooting/Flashing ROM questions

How compareable is flashing roms on the Droid 3 compared to the HTC Eris. I'm tired of the lag and bloat and wish to try some new ROMs. I just don't want brick my phone. Rooting looked simple but I don't understand bootstrap/safestrap. Any help would be greatly appreciated!
Sent from my DROID3 using XDA App

jwanny10 said:
How compareable is flashing roms on the Droid 3 compared to the HTC Eris. I'm tired of the lag and bloat and wish to try some new ROMs. I just don't want brick my phone. Rooting looked simple but I don't understand bootstrap/safestrap. Any help would be greatly appreciated!
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
Get bootstrap/safestrap from the internet -- install the app.
Run the app, install recovery.
Turn phone off.
Press m + power.
Scroll to BP Tools -- select it.
You're in custom recovery.

Which is better, bootstrap or safestrap?
Sent from my DROID3 using XDA App

jwanny10 said:
Which is better, bootstrap or safestrap?
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
Safestrap by far, the rom will install to another partition /preinstall rather that /system. This keeps the VZW rom intact to prevent bricking and still get OTAs easily. It's practically impossible to brick it using Safestrap.

Thanks, I'll be giving this a try!
Sent from my DROID3 using XDA App

So root (obviously), install safestrap, then I just boot into recovery via safestrap and flash Liberty 2.0? Just being anal, the more I read the less confident I get. Once I burst my cherry, I should feel better. Lol. Thanks for all the help everyone!
Sent from my DROID3 using XDA App

if ur stock 5.6.890, root, install otarootkeeper, install safestrap, open the app, install recovery, boot into recovery (during boot you will hit menu), backup data, toggle safe mode, install ROM, wipe data/cache, reboot
---
check http://hash-of-codes.blogspot.com/p/android-downloads.html for safestrap and CM7 downloads. also if you are on 5.7.894 you will need to use his patch to run any roms.

Did you mean wipe data/cache THEN install ROM?
Sent from my DROID3 using XDA App

jwanny10 said:
Did you mean wipe data/cache THEN install ROM?
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
most roms either way will work

Rooted, install ota rootkeeper, installed and ran safestrap, rebooted into recovery, tried to turn on safe mode and got error. rebooted and tried to make a back up, got error.
Error occured when attempting to make backup image of /data
Happened both times. Am I royally screwed?
Phone works still but I don't dare flashing a ROM until I get safe mode. Hints?

If im not mistaken, rootkeeper doesnt need to be used unless you are going to install 5.7.894, as it messes with your roms ability to access SU
Droid 1 Rooted (ChevyNo1 0.9MV Kernel, LGB2.6)
Droid 3 Rooted (Stock Kernel, Custom lite De-bloat)

My phone had trouble mounting as R/W when i got a SU update via the superuser app off the market, i unprotected and updated my binary again and it worked fine. Keep OTA Rootkeeper installed, activate it before upgrading to an update that has no root method yet, then after you reinstall SU, and reestablish the symlink in your new update, remove the protection and verify you still have root. Its not necessary for CWM recovery tasks though
Droid 1 Rooted (ChevyNo1 0.9MV Kernel, LGB2.6)
Droid 3 Rooted (Stock Kernel, Custom lite De-bloat)

So if I lose ota rootkeeper, I can create a backup? My problem is I can't create a data backup or switch to safe mode. It gives me an error message that says unable to create backup image of /data. Am I corrupted? My phone still works as far as I know.
Sent from my DROID3 using XDA App

jwanny10 said:
So if I lose ota rootkeeper, I can create a backup? My problem is I can't create a data backup or switch to safe mode. It gives me an error message that says unable to create backup image of /data. Am I corrupted? My phone still works as far as I know.
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
Safestrap and bootstrap(I believe) have issues creating a backup of a file that cannot be changed. So yes if you remove it, then you be able to use safestrap correctly.
Sent from my DROID3 using XDA App

Removed ota rootkeeper changes still get "Error occurs in creating backup image of /data"
Any other ideas.
Running Verizon 5.6.890 stock blur. Used psouza one click root. Ran debloat script, but I don't think I did it right.
Sent from my DROID3 using XDA App

I tried to run the debloat restore and then make a backup, but still the same error. I noticed in the thread pertaining the debloat script that someone also gets it to run until myverizon.apk messes it.
Making backups and flashing new ROMs was so easy with the Eris. I apologized because I'm such a noob when it comes to Moto Droids and scripting.
Sent from my DROID3 using XDA App

[REQUEST] Root &.902

Can someone post a step-by-step method on how to update to. 902 and keep root. The more detail the better. I only ask this because this is my second bionic and I dont want to brick it.
Thanks in advance!

I'm in the same boat haven't bricked but never rooted a locked boot loader device before but I just want me some taste of ics..
Sent from my DROID BIONIC using XDA App

Can you tell us which version your on? That will be helpful in letting us help you if we know.
Sent from my DROID BIONIC using XDA App

netslum said:
Can someone post a step-by-step method on how to update to. 902 and keep root. The more detail the better. I only ask this because this is my second bionic and I dont want to brick it.
Thanks in advance!
Click to expand...
Click to collapse
This is what i did
I flashed stock rom using rsd lite
RSD LITE 5.6: http://db.tt/y23vQ3Td
Using this zip: http://db.tt/hBFdk3qv
ROOTED AND 4EVER ROOTED MAKE SURE YOU DO THIS IF YOU WANT ROOT[I always root stock instead of .893 fnr(for no reason)]
BOOT INTO STOCK RECOVERY
FIRST FLASH .893: http://db.tt/vfNEdVdf
THEN .902: http://db.tt/g0gm69Hq
REBOOT
enjoi
If your already on .893 just flash .902 in STOCK RECOVERY NOT CWM
FOR SUPER NOOBS
Flashing to stock
Extract the flashme.zip to the desktop
Open RSD Lite and click on the ... symbol
In the box, go to desktop and choose "default_flash_targa"
Put your phone in Fastboot Mode
Click Start
If anyone used this method...
dont be afraid of the thanks button lol

iNsAnEmOd said:
This is what i did
I flashed stock rom using rsd lite
RSD LITE 5.6: http://db.tt/y23vQ3Td
Using this zip: http://db.tt/hBFdk3qv
ROOTED AND 4EVER ROOTED MAKE SURE YOU DO THIS IF YOU WANT ROOT[I always root stock instead of .893 fnr(for no reason)]
BOOT INTO STOCK RECOVERY
FIRST FLASH .893: http://db.tt/vfNEdVdf
THEN .902: http://db.tt/g0gm69Hq
REBOOT
enjoi
FOR SUPER NOOBS
Flashing to stock
Extract the flashme.zip to the desktop
Open RSD Lite and click on the ... symbol
In the box, go to desktop and choose "default_flash_targa"
Make sure you've checked the "unknown sources" and "debugging
If anyone used this method..
dont be afraid of the thanks button lol
Click to expand...
Click to collapse
I did unr3l3as3droot and forever root first. Then I did the path saver. Then I flashed 896 and 901. After that, I downloaded the 902 ota but didn't install it. Moved it from /cache to the external SD card. Then I turned the phone off. To turn it back on, I hit both volume up and down as I powered it back on. That took me to a different menu that I can't currently think of the name but that is where you will flash 902 at. Remember that the 902 update has 901 in its file name when flashing. If you come across a triangle thing, hit volume up and down and the update will flash.
Sent from my XT875 using XDA App

smokedkill said:
I did unr3l3as3droot and forever root first. Then I did the path saver. Then I flashed 896 and 901. After that, I downloaded the 902 ota but didn't install it. Moved it from /cache to the external SD card. Then I turned the phone off. To turn it back on, I hit both volume up and down as I powered it back on. That took me to a different menu that I can't currently think of the name but that is where you will flash 902 at. Remember that the 902 update has 901 in its file name when flashing. If you come across a triangle thing, hit volume up and down and the update will flash.
Sent from my XT875 using XDA App
Click to expand...
Click to collapse
eh.. it works but im not the one who needs it

Im on. 893
SENT from the HEART of the DINO-HUMAN LAIR in the CENTER of the EARTH on the DROID BIONIC using XDA PREMIUM

I'm on 902 100 percent stock never rooted this phone yet want to bit need to make sure I don't brick
Sent from my DROID BIONIC using XDA App

Easier root method...
There is an easier way then this now...
1. Install update
2. Use the Droid 4 exploit found at vulnfactory.org/blog/2012/02/11/rooting-the-droid-4-a-failed-bounty-experiment/ and yes it works for the Bionic on 5.9.902 (i just got done using it)
3. Look at your phone.... its now rooted.

And everyone who uses it should donate to djrbliss and prove that the Android community can support such a valuable asset!

netslum said:
Can someone post a step-by-step method on how to update to. 902 and keep root. The more detail the better. I only ask this because this is my second bionic and I dont want to brick it.
Thanks in advance!
Click to expand...
Click to collapse
I just did the OTA over wireless and did the update and I kept ROOT.
I did un-froze all the apps I had frozen with titanium backup before applying the update.
Still have root...

In my case, the update wouldn't install. I had to go all the way back before I could go forward.
Sent from my DROID BIONIC using XDA App

netslum said:
Im on. 893
SENT from the HEART of the DINO-HUMAN LAIR in the CENTER of the EARTH on the DROID BIONIC using XDA PREMIUM
Click to expand...
Click to collapse
You should be able to just flash .902 in stock recovery
if all else fails try YouTube
http://www.youtube.com/watch?v=Fw2GJ3wCi4A&feature=player_embedded#!
Sent from my DROID BIONIC using xda premium

Xluthienx said:
There is an easier way then this now...
1. Install update
2. Use the Droid 4 exploit found at vulnfactory.org/blog/2012/02/11/rooting-the-droid-4-a-failed-bounty-experiment/ and yes it works for the Bionic on 5.9.902 (i just got done using it)
3. Look at your phone.... its now rooted.
Click to expand...
Click to collapse
so being 100 percent stock .902 this works i am not rooted never have been i also want to be alble to flash the ics rom how do i go about doing this... and how easily reversable is this method meaning going back to 100 percent stock i want to be able to get the official ics when it comes out or return phone to vzw if needed.. thanks in advance..

If you lose root during the update, see here to get it back.

Easiest way to get back to stock rom Z7?

Do I just download the Z7 .tot file to the SD and flash as a normal rom?

No. Read my forum in development. There's inscructions in how to flash the tot
Sent from my ADR6425LVW using Tapatalk 2 Beta-5

Got it. I downloaded Z7 stock rom and then was gunna allow the update to install automatically, I guess I should have downloaded the Z8 rom to save some time?
oh well..

Alright, made it back to Z7 and did the OTA update to Z8..
now how do I root and get CWM again?? That ALLINONE executer does not work.

Bob_Bobber0 said:
Alright, made it back to Z7 and did the OTA update to Z8..
now how do I root and get CWM again?? That ALLINONE executer does not work.
Click to expand...
Click to collapse
Start over from zv7 and read MT's easiest way to maintain root to zv8 inn the Dev section
Sent from my VS910 4G using XDA

[Q] Stock zv8 -> Broken Out 1.1???

So I have a refurbished Revolution that came with zv8 already installed. Is there a way to get it rooted and flash Broken Out 1.1?

ivalum21 said:
So I have a refurbished Revolution that came with zv8 already installed. Is there a way to get it rooted and flash Broken Out 1.1?
Click to expand...
Click to collapse
Downgrade to zv7
Root and install cwm
Download and flash MT's "keep root through update Zip"
Run system update
reinstall cwm
Flash broken out
buy a falcon with the profits
Sent from my VS910 4G using XDA

kcarden said:
Downgrade to zv7
Root and install cwm
Download and flash MT's "keep root through update Zip"
Run system update
reinstall cwm
Flash broken out
buy a falcon with the profits
Sent from my VS910 4G using XDA
Click to expand...
Click to collapse
How do you downgrade to zv7?

Use LGPNST Method or however you spell it. Its in the development section and it includes all instructions for downgrading. Or you can wait of an all in one method to root VZ8 to come out.
If your new to this whole root thing, I'd wait because if you don't follow the downgrading instructions exactly, you could cause problems witb your phone.
Sent from my VS910 4G using xda premium

Restoring Stock Factory Settings.

I am having quite a few issues with my phone running slower then a Ferrari with no engine lol everything lags horribly bad. Even just opening my contact list takes a couple minutes before it opens. And just trying to type a text or typing this post right now takes so long cause the keyboard lags out so bad and can't keep up with the speed I type like it usually has no problem doing.
So I was hoping someone could give me detailed, step by step instructions or a guide, to restore your phone back to unrooted stock, just came out of the box, settings. I wanna completely restart my phone. But I don't know how to go about doing that. I've done it with my last two Android phones. Which were a Droid X and before that a Droid 2 Global. But I was told that the process for Motorola phones, which you just use RSDlite and its pretty easy but like I said. I was told that RSDlite only works with motorola phones. So if someone could help me do this. It would be very much appreciated.
I already restored my nandroid back up I made before flashing the last rom I was using. So I am just using the stock ZV7 LG rom but its rooted. I also wanna be able to do the process of keeping my phone rooted and still be able to go to the new ZV8 version. My phone keep trying to update everyday but obviously it wont work cause I am rooted and plus I don't want to stuck and unable to root my phone amd flash tols and what not. Which last time I checked no one has figured out how to just straight root the new ZV8 version. You have to do that process that just lets you keep rooted and still update. Which hopefully someone will figure out how to just root ZV8 itself.
Anyways, like I said, if someone could help me completely restart my phone and start fresh as if it just came out of the box for the first time. I would greatly appreciate it. Thanks.
Sent from my officially pimped LG Revolution

Any help would be nice lol
Sent from my officially pimped LG Revolution

Bumpity Bump Bump !

And 1 bump and a 2 bump and a 3 bump 4 bump !!!!
Sent from my officially pimped LG Revolution

Here's a very detailed walkthrough with links to all resources needed to get you back to stock http://forum.xda-developers.com/showthread.php?p=19154278
After you do that just run system update to get to ZV9, if you want to root ZV9 use the LG Esteem root found here http://forum.xda-developers.com/showthread.php?p=25362328
Edit: If you want to speed up ZV9 after root, here are a few tips
here's a foolproof way to deodex your phone
http://forum.xda-developers.com/showthread.php?p=7844122
Move any apps you don't want to your sdcard or freeze them if you're super paranoid
spc_hicks posted a good Tweaks Collection a while back
http://forum.xda-developers.com/showthread.php?p=20865369
Click to expand...
Click to collapse
Sent from my GT-P7310 using XDA Premium HD app

trampledbyturtles said:
Here's a very detailed walkthrough with links to all resources needed to get you back to stock http://forum.xda-developers.com/showthread.php?p=19154278
After you do that just run system update to get to ZV9, if you want to root ZV9 use the LG Esteem root found here http://forum.xda-developers.com/showthread.php?p=25362328
Sent from my GT-P7310 using XDA Premium HD app
Click to expand...
Click to collapse
I have not been able to run the update. Tells me know update available. Tried to get one from LG no dice
Sent from my VS910 4G using XDA

trampledbyturtles said:
Here's a very detailed walkthrough with links to all resources needed to get you back to stock http://forum.xda-developers.com/showthread.php?p=19154278
After you do that just run system update to get to ZV9, if you want to root ZV9 use the LG Esteem root found here http://forum.xda-developers.com/showthread.php?p=25362328
Sent from my GT-P7310 using XDA Premium HD app
Click to expand...
Click to collapse
ZV9 ? I thought it was ZV8 was the latest update. Cause I am on ZV7 which was the update before the latest one, at least as far as I know. I am pretty sure I am on ZV7 and ZV8 was the latest. Have they come out with another update recently ? cause last time I Checked about 4 or 5months ago, ZV8 was the one that just came out.

It is really easy. Flash the v8 TOT. Upgrade to v9, do a factory reset and bam out of box v9. You can then root and what ever else (re-install apps)

BackSeatSuicide said:
ZV9 ? I thought it was ZV8 was the latest update. Cause I am on ZV7 which was the update before the latest one, at least as far as I know. I am pretty sure I am on ZV7 and ZV8 was the latest. Have they come out with another update recently ? cause last time I Checked about 4 or 5months ago, ZV8 was the one that just came out.
Click to expand...
Click to collapse
ZV9 came out about a month ago or longer. One upgrade was being able to send and receive mms over WiFi
Sent from my VS910 4G using XDA

Haxcid said:
It is really easy. Flash the v8 TOT. Upgrade to v9, do a factory reset and bam out of box v9. You can then root and what ever else (re-install apps)
Click to expand...
Click to collapse
okay, it's not that easy. I'm a noobie. I flashed the v8 tot, and I know it worked since in phone info, it changed from v4 straight to v8. BUT, for some reason, superuser and my old apps were still in the phone on the v8.
I went to check new software... nothing. V9 was a no go. What did I do wrong? I flashed it properly.
ALSO!!! HOW THE HECK DO I GET CLOCKWORK MANAGER IN V8 AND HOW DO I REBOOT INTO IT. help