Guys i accidentally install i9100 firmware to my Galaxy Note and the screen is total blank with sounds of booting samsung intro. Then i install N7000 firmware. Then screen is total blank again with intro sound.
Then i install 2.tar from triangle remove post in xda n7000 also. Then screen turn to normal. I can use my N7000 again its back to normal.
This is it when i reboot or restart the upper left small green words appear about 3 seconds then back to normal the word is ( "logo.gt.jpg" draw failed )
Question is how can i remove it? Any idea guys? Did someone of you guys experience this?
Sent from my GT-N7000 using Tapatalk 2
Guys i know the logo. That means i lost the Galaxy Note GT-N7000 logo when restart or roboot.
Sent from my GT-N7000 using Tapatalk 2
Tx to Dr. Ketan... I copied this from his thread.
If you have logo_q1.jpg draw failed" error (Thnx Schaggo)
Go back to the firmware you had, root it, flash newest or in fact any CF-Root kernel. Then start over.
Redownload the ROM. Extract it.
Create folder /sdcard/external_sd/firmware (thats folder "firmware" (lowercase) on your external SD card)
Put following 3 ("three") files in it:
CODE_blah.tar.md5
GT-N7000-MULTI-CSC.blah.tar.md5
MODEM_blah.tar.md5
Open CWM App, select "Flash stock firmware"
Click continue a couple times. Important steps:
In case asked which kernel you want to take, chose CODE_blah
When asked what you want as CACHE select GT-N7000-MULTI-CSC-blah
When asked about rooting say Keep CF-Root Kernel
Done
If it help you Dont forgrt to press THANKS button.
Finally the serious answer! Thanks dude.
Sent from my GT-N7000 using Tapatalk 2
ryn888 said:
Finally the serious answer! Thanks dude.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Most welcome, MP
Unable to get the things
hie...
actaully few days b4 i installed 4.4 custom rom in my mob n7000
due to some issue i lost the logo and was getting img.jpg draw failed
and mob was starting in twrp mode and then i use to click on reboot system then it was getting started ..
then i thought of going bak to stock rom , but in this also i am getting the same error ...please some one help
am using stock rom
of india
Related
After i flashing gt over the odin with stock rom, gt rebooting and stay in samsung screen more then 15 min and nothing!!! Now i can go in downloading mode, but after that alwaise stay in sam.screen. What can i do? Sory on my english.
Please help!
No one has the right idea?
Your soft bricked go into download mode and flash the pit and pda(tar).
Sent from my GT-P1000 using XDA Premium App
I did it several times. Tab flashes successfully but still stuck at the end of the Samsung screen who keeps blinking.
dr.kis said:
I did it several times. Tab flashes successfully but still stuck at the end of the Samsung screen who keeps blinking.
Click to expand...
Click to collapse
flash again and wait.
I had to wait more than 15mins for the first boot ....then it came out and booted into the tablet.
I'll try it and now, but I waited over 20 minutes and nothing.
I think you should redownload and try the tar again. I'm sprint and have dne mine several times no issues.
dr.kis said:
I'll try it and now, but I waited over 20 minutes and nothing.
Click to expand...
Click to collapse
Sent from my SPH-D700 using XDA App
Maybe if you listed what you were trying to flash we could be of more help.. You could have a bad kernel flash, or just need to reboot back into recovery and do a data and cache wipe.. Theres a number of things..
Sent from my SPH-P100 using XDA App
You need to post -
1. What rom.
2. GSM or CDMA.
3. Steps done.
It also helps if you have a copy of your stock rom in case a restock is needed...
It P1000 is a GSM GT. I do not know what the firmware was in it at first but I did update via Kies 2.3.3 Then the stock is in tablet Backup blocked. Then I tried with almost all European firmware with samfirmware site and no I did not succeed. Odin sends me the message that the system is successfully upgraded, but at startup I get a message that is not mount E disk and then stuck in samsung blinked screen.
I do not have copy of my stock rom unfortunately.
That's about all I know about the problem.
Hello xda
Trying too root and add cwm to my galaxy tab but hit a little bump in the road
Adding a pic to show the problem, is there any way to fix this ?
Thanks
http://img268.imageshack.us/img268/850/20111226200113.jpg
I have the same thing on my galaxy tab. It's the "you suck at loading software" screen lol from my understanding its still the Download mode screen.
You have to use odin or heimdall to load a new Rom.
Sent from my LG-P999 using xda premium
This happened to me yesterday. I plugged it in my computer and eventually it picked it up!! just open Odin, plug in tab. Once Odin Finally recognizes tab flash back to stock! Took my tab 20 min to pop up on Odin just an fyi.
Radeon1337 said:
Hello xda
Trying too root and add cwm to my galaxy tab but hit a little bump in the road
Adding a pic to show the problem, is there any way to fix this ?
Thanks
http://img268.imageshack.us/img268/850/20111226200113.jpg
Click to expand...
Click to collapse
Sent from my PC36100 using XDA App
Do you have a link to a stock rom download ? P1000 ?
I can`t seem to find one that is completly stock :S
Go here and download gbsafe_v5. Zip
It has everything you need including drivers and odin files
http://forum.xda-developers.com/showthread.php?t=1317384
Also download overcome-kernel_4. 0.tar file as well.
Once you downloaded these two files plug in your tab to usb and wait for that phone and pc screen.
Go here and follow steps up to 10.
magrathearoms.weebly.com/install.html
Your phone is now stock'ish GB with OC'ed kernel including custom clockwork recovery. This version also comes with phone capabilities unlocked so you can use it like a real phone. All you have to do is load tmobile. Modem file
Sent from my LG-P999 using xda premium
hello i have the exact same problem but mine goes into recovery mode with the android man and the white box but if i try and select that with the volume up button it just turns off here is what i have been told too do
1) Download this file:
2) Put the file on your internal storage.
3) Reboot into recovery-------------------------I can do
4) Execute the Wipe Data/Factory Reset option-----------------------cant do!
5) Choose Install Zip from SD Card--------------Cant do!
6) Choose Choose Zip from SD Card----------------------Cant do1
7) Select the P7310UEKHA_Restock_v1.zip--------Cant do!
8) Sit back, wait about 5 minutes
9) Once the script completes and says "Done", reboot.
10) Welcome to a completely stock US Retail tab
any help would be very much appreciated I'm rooted and was wondering if sent it back to Samsung would they know? im rooted because if i cant get access to anything they wont be able to will they? please help there is a photo (Very blurry) sorry!
Hi
I need help, if some one could help me was very good.
I upgrade my Galaxy Tab P1000 to Android 4.1.1 via Jelly Bean Sapir ROM (CM10-based) follow the procedure in this link
How to upgrade the Galaxy Tab P1000 to Android 4.1.1 Jelly Bean
Everything went perfectly until the end.
After the reboot re-enter recovery mode, I was doing a little research and found someone who says the tab came in recovery again to install the google app.
Okay I installed the gapps. He returned to boot into recovery, after tried it out of recovery mode but could not.
I opted to try again and get back behind the previously created backup. From then on the tab starts the past 2/2 blocks and only appears on screen Galaxy tab and bottom samsung.
Someone can help me?
Friends I am not well understood in this matter if I have said or done something stupid peoblemas not have to tell me learn and not just because I repeat.
From already thank you
When you first install CM10, you need to flash it multiple times, could be up to 4 times.
The first few just upgrades your cwm/kernel and converts to mtd, etc.
The last one will take the longest, you will see messages about flashing system etc etc.
Only then you flash gapps after the last long flash.
Sent from my GT-I9300 using xda app-developers app
priyana said:
When you first install CM10, you need to flash it multiple times, could be up to 4 times.
The first few just upgrades your cwm/kernel and converts to mtd, etc.
The last one will take the longest, you will see messages about flashing system etc etc.
Only then you flash gapps after the last long flash.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Do you now how can I recover my tablet?
League is not as if there was software.
is dead.
Can you go to download mode?
If so follow overcome links in my signature.
Sent from my GT-P1000 using xda app-developers app
No, the battery died and I went by charging past few hours I went to see if it was loaded and the stack that appears on the screen remained blank but the tablet was light on the buttons ...
No power, no turn off, the tablet is frozen on the screen with the battery.
But even when he entered the recovery mode would not let me access the memory card ...
If you are talking about stock recovery (3e) then don't even bother to look into that.
For now just concentrate on charging the device and boot to download mode.
Sent from my GT-P1000 using xda app-developers app
Strange thing is that I could get into download mode but after finishing the battery has not let me in ...
I cant do power on
Do you think I gone need riffbox?
I want to acknowledge the help they gave me, after several attempts managed to get into Download mode and follow the procedure that has provided me, "http://forum.xda-developers.com/show....php?t=1881981" resolving the problem.
Thank you ...
Now I have another probelama, put the rom Android 4.1.1 ROM Jelly Bean by Sapir (CM10-based) and I can not make calls or put Widgets.
You know tell me which is the best rom for Galaxy tab GT-P1000?
And also wanted for my HTC Tattoo with the best room possible, have any idea?
I have the mobile phone 1 year and is still with Android 1.6
Hey there, first of all thanks for taking the time to even click the post.
My partner's younger brother decided to root his Galaxy S3 Mini without looking up the correct instructions for this particular phone. Unforunately he accidentally (to an extent) used the wrong rom, using a Galaxy S3 root instead of the correct one for the Mini. He realised his mistake when the process wasn't working correctly on ODIN and quickly removed the wire (his second mistake).
So he brings the phone to me to fix (I was unaware he was attempting to root the phone). Now I looked up some guides on this forum onhow to 'Unroot' an S3 Mini and followed them step by step, downloaded this file 'I8190XXAMB2_I8190OXXAMB1_BTU.zip' as we're based in England and selected the md5 file for the PDA box, then started the process.
It installs fine, until it say 'Reset' in the box showing the status of the root, in which the phone reboots and simply sits on the Samsung Galaxy S3 Mini splash screen - the phone isn't detected by the PC after this point and ODIN idle's for a while before saying 'PASS' but not showing the phone connected.
The phone then stays at the Galaxy S3 Mini splash screen indefinitely, the only thing I can do is access download mode and retry, which I have.
Could anyone shed some light on why this is happening and what I'm doing wrong? I've scanned the forum a number of times but I'm still unable to troubleshoot this, i wouldn't post unless I was really stumped -sorry guys.
Cheers in advance.
If u can access the recovery do it, do a full factory rest, then flash stock through odin (takes few mins) then factory reset in recovery again and should work, if not u got urself a hard brick....
Sent from my GT-I8190 using xda app-developers app
LukBoy99 said:
If u can access the recovery do it, do a full factory rest, then flash stock through odin (takes few mins) then factory reset in recovery again and should work, if not u got urself a hard brick....
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
I can't access Recovery Mode at all, I can only access the download mode. Is that a definite sign of a hard brick? I was told somewhere that as long as download mode is accessible you can sort it,but I'm unsure how true this is. Any help would be most appreciated.
Thanks for the reply.
Here see if this works, unzip and flash tar in PDA in Odin, hopes it helps you. http://forum.xda-developers.com/attachment.php?attachmentid=1597061&d=1356658154
Sent from my GT-I8190 using Xparent BlueTapatalk 2
kicker63 said:
Here see if this works, unzip and flash tar in PDA in Odin, hopes it helps you. http://forum.xda-developers.com/attachment.php?attachmentid=1597061&d=1356658154
Sent from my GT-I8190 using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
This seems to have worked - I have no clue what the file was, I assume from the name it was Parameters required for the phone to boot? Either way, thank you so very much!
Good glad it help, please press the thanks button if it helps.
Sent from my GT-I8190 using Xparent BlueTapatalk 2
---------- Post added at 02:38 AM ---------- Previous post was at 02:10 AM ----------
Thank you, keep that file handy, just in case you have that problem again.
Sent from my GT-I8190 using Xparent BlueTapatalk 2
MasterLin said:
This seems to have worked - I have no clue what the file was, I assume from the name it was Parameters required for the phone to boot? Either way, thank you so very much!
Click to expand...
Click to collapse
Me neither
Sent from my GT-I8190 using Tapatalk 2
MasterLin said:
Hey there, first of all thanks for taking the time to even click the post.
My partner's younger brother decided to root his Galaxy S3 Mini without looking up the correct instructions for this particular phone. Unforunately he accidentally (to an extent) used the wrong rom, using a Galaxy S3 root instead of the correct one for the Mini. He realised his mistake when the process wasn't working correctly on ODIN and quickly removed the wire (his second mistake).
So he brings the phone to me to fix (I was unaware he was attempting to root the phone). Now I looked up some guides on this forum onhow to 'Unroot' an S3 Mini and followed them step by step, downloaded this file 'I8190XXAMB2_I8190OXXAMB1_BTU.zip' as we're based in England and selected the md5 file for the PDA box, then started the process.
It installs fine, until it say 'Reset' in the box showing the status of the root, in which the phone reboots and simply sits on the Samsung Galaxy S3 Mini splash screen - the phone isn't detected by the PC after this point and ODIN idle's for a while before saying 'PASS' but not showing the phone connected.
The phone then stays at the Galaxy S3 Mini splash screen indefinitely, the only thing I can do is access download mode and retry, which I have.
Could anyone shed some light on why this is happening and what I'm doing wrong? I've scanned the forum a number of times but I'm still unable to troubleshoot this, i wouldn't post unless I was really stumped -sorry guys.
Cheers in advance.
Click to expand...
Click to collapse
Simply put the phone in in odin download mode and flash this
Unzip and find tar file, flash as PDA in odin, he forgot to mention this.
Sent from my GT-I8190 using Xparent BlueTapatalk 2
Yes I forgot.. sorry
Inviato dal mio GT-I8190 con Tapatalk 2
so i bought this phone online and it was stuck at Samsung logo so i flashed NC2 via odin and it came back up...... YAY !!
however there's a new set of issues i have to deal with and i cant figure it out because i've tried like 6 roms now and i cant downgrade because of this dumb fuse thing on the N900a
so im stuck with the 4.4.2 roms
however the Problems are:
1. entering camera, it shows black screen then says "warning: camera failed".
2. entering the phone dialler it takes seconds to respond
3. music is freezes
4. unlocking the phone it takes seconds to open
5.wakelock takes seconds also to respond
6. no sound
has anyone any idea whats causing this ?
thanks in advance
Sounds like bad flash. Try to clear everything in stock recovery and flash Odin files again.
Sent from my SAMSUNG-SM-N910A using XDA Premium HD app
norbarb said:
Sounds like bad flash. Try to clear everything in stock recovery and flash Odin files again.
Sent from my SAMSUNG-SM-N910A using XDA Premium HD app
Click to expand...
Click to collapse
thanks for the reply , i did that and flashed all odin files as as well as custom roms , all dont display camera and have same issues ,
still not working , any advice guys