Is it worth the change? i would like to use the tablet mode functionality. Also, can i flash PA V.2 straight on top of my current CM( build 7?
bump
sneakers2606 said:
Is it worth the change? i would like to use the tablet mode functionality. Also, can i flash PA V.2 straight on top of my current CM( build 7?
Click to expand...
Click to collapse
When I was in CM9 I just flashed PA v0.2 then wiped cache and dalvik. It works for me with no problem. I prefer PA over CM9 but you need to try it out.
PA on stock ICS?
Is the use of CM9 ROM mandatory, or could I try out PS on the german XXPLY stock ICS rom?
Hobbes2099 said:
Is the use of CM9 ROM mandatory, or could I try out PS on the german XXPLY stock ICS rom?
Click to expand...
Click to collapse
Umm.....PA is it's own ROM. It's just built on CM9 builds. So, you can't run it "on the stock rom".
Paranoid is the BEST CM9 based ROM I have ever used and that is saying something!!! It is just freekin AWESOME!!!
yiannisthegreek said:
Paranoid is the BEST CM9 based ROM I have ever used and that is saying something!!! It is just freekin AWESOME!!!
Click to expand...
Click to collapse
+1 Agreed.
Tablet mode is AWESOME!
Hobbes2099 said:
Is the use of CM9 ROM mandatory, or could I try out PS on the german XXPLY stock ICS rom?
Click to expand...
Click to collapse
Remember to read the install instructions, you must flash Paranoid rom from a rooted GB rom.
so can anyone else confirm that it is safe to flash PAv0.2 over CM9 Build 7??
sneakers2606 said:
so can anyone else confirm that it is safe to flash PAv0.2 over CM9 Build 7??
Click to expand...
Click to collapse
It is, PA is based in CM9.
Sent from my GT-N7000 using xda premium
paranoid android rom landscape wallpaper issue
hi.. im new in this thread.. i newly flashed paranoid android in my gnote. the prob is when on vertical mode my wallpaper is full but on landscape mode its seem like the wallpaper is mving to the right and a big black bar on the left screen. anyone can help
Related
Hi to everyone
I would like to know if there is a ROM for our Nexus1 with a functional hardware
Thanks
marcelloyoda said:
Hi to everyone
I would like to know if there is a ROM for our Nexus1 with a functional hardware
Thanks
Click to expand...
Click to collapse
do you mean hardware acceleration??? there are many. head over to Development Section...
Sent from my Nexus One using Tapatalk
BCM / Evervolv / AOKP / MIUI all in dev forum.
Note video recording doesn't work correctly yet on ICS ROMS, but everything else does including taking pictures.
Sent from my Nexus One using XDA
n1newbie said:
do you mean hardware acceleration??? there are many. head over to Development Section...
Sent from my Nexus One using Tapatalk
Click to expand...
Click to collapse
I would like to know if there is a ROM without problems, for example with the Gapps, USB or wifi.
cpm said:
BCM / Evervolv / AOKP / MIUI all in dev forum.
Note video recording doesn't work correctly yet on ICS ROMS, but everything else does including taking pictures.
Sent from my Nexus One using XDA
Click to expand...
Click to collapse
Some of these like texasice's ROM has problems with Gapps, USB and wifi...do u know if there is a ROM without this type of problems?
Thanks
marcelloyoda said:
Some of these like texasice's ROM has problems with Gapps, USB and wifi...do u know if there is a ROM without this type of problems?
Thanks
Click to expand...
Click to collapse
Most of the ICS ROMs are still WIP so if you are looking for a perfect ICS ROM for the N1 then you will have to wait. And please don't ask when that will be a perfect ICS ROM
taodan said:
Most of the ICS ROMs are still WIP so if you are looking for a perfect ICS ROM for the N1 then you will have to wait. And please don't ask when that will be a perfect ICS ROM
Click to expand...
Click to collapse
ok thanks for the reply
marcelloyoda said:
Some of these like texasice's ROM has problems with Gapps, USB and wifi...do u know if there is a ROM without this type of problems?
Thanks
Click to expand...
Click to collapse
I use BCM ICS CM9 and don't have any of those problems.
Sent from my Nexus One using XDA
cpm BCM / Evervolv / AOKP / MIUI all in dev forum.
////
What one is the best of these ROMs?
suryateja.sun said:
cpm BCM / Evervolv / AOKP / MIUI all in dev forum.
////
What one is the best of these ROMs?
Click to expand...
Click to collapse
You will have to try them out yourself to see which one you like. Each ROM has different features.
you can up CM9 4.0.4 BCM RC4.1U2.
i think it very well!
The last one I've try on my N1 was Everlov, and I can say it was very fine. But if you want a ICS which works like 2.3.7 the best you can do is install stock 2.3.7 and change the launcher to ICS launcher one.
When do we get a AOKP build based on 4.1.1 JB?
Anybody knows?
You mean this?
No.
AOKP = Android Open Kang Project
One of the most powerful custom roms I know.
No eta
Sent from my SGH-I727 using xda premium
afaik they are working on it but nothing done yet. check the official site:
www.aokp.co
whenever its released that will be the first place you will find it!
fpdragon said:
No.
AOKP = Android Open Kang Project
One of the most powerful custom roms I know.
Click to expand...
Click to collapse
That'll teach me to skim-read
Ported!
Posted: http://forum.xda-developers.com/showthread.php?t=1824273
Very nice but I have a GT-P7300 and not the GT-P7310
Any chance to fix the boot problems?
fpdragon said:
Very nice but I have a GT-P7300 and not the GT-P7310
Any chance to fix the boot problems?
Click to expand...
Click to collapse
uploading for the P7300
P7300 build uploaded
on dev section i think we have illusion ROM and CM 10 Perview
maybe still unofficial but lets hope for this thing will be official
cebonk said:
on dev section i think we have illusion ROM and CM 10 Perview
maybe still unofficial but lets hope for this thing will be official
Click to expand...
Click to collapse
Keep in mind CM ≠ AOKP, and without a fully working ROM Control...well, that's AOKP's essence. Romanbb and company are working on it. Patience is a virtue.
safariking said:
P7300 build uploaded
Click to expand...
Click to collapse
tried this.. i think uploaded the wrong rom.. it is actually kallt_kaffe's 08-08-2012 7310 build..
Kk's CM10 build was sweet. I also tried the aosp jb version and I like the rom too. I am actually waiting for the first of either one to get updated so that we have a fully functional and stable rom of jb. Right now both rooms have its shortcomings. But it's better than the stock honeycomb version.
Sent from my GT-P7310 using Tapatalk 2
Hi guys and girls!
Hope you are all doing well. Anyway, I rooted yesterday and am running a new kernel (speed mod k13 I believe) anyway. What I am after now, is as the title says, a light, fast rom with decent battery life. I was wondering if anyone had suggestions or experiences and could suggest something. Would a CYANOGEN from work? When I had my galaxy s I was using 7 and found it really good. But are there others?
Cheers!
Oliver
Sent from my GT-N7000 using xda app-developers app
cyanogen will indeed work as will paranoid android charack,s,rocket rom if its lite you want then look for a rom with aroma installer so you can install what you want
Cheers!, really liking the look of paranoid android, especially the hybrid roms! it has been a goood while since i flashed a rom, so need to figure out what i have to do again. lol, thanks, if you can provide any tips on moving to this rom from stock ics with speedmod kernel, it would be helpful! Thanks.
Is this a decent guide to follow for paranoid android?
http://www.theandroidsoul.com/get-jelly-bean-and-hybrid-ui-on-galaxy-note-with-paranoidandroid-v2-0/
Cheers.
Sent from my GT-N7000 using xda app-developers app
curlymanoliver said:
Is this a decent guide to follow for paranoid android?
http://www.theandroidsoul.com/get-jelly-bean-and-hybrid-ui-on-galaxy-note-with-paranoidandroid-v2-0/
Cheers.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
check this guide, its looks good for you.
So from this, ill just flash paranoid ratheer than than than the JB it suggests?
curlymanoliver said:
So from this, ill just flash paranoid ratheer than than than the JB it suggests?
Click to expand...
Click to collapse
Yes, JB referred in the guide are all JB/CM10 based roms.
Check this thread, some one just flashed JB rom using above guide
Thanks So Much, Very helpful so as long as i am on safe kernel i do not have to worry about being on a cm9 rom before i flash JB(cm10 based)?
curlymanoliver said:
Thanks So Much, Very helpful so as long as i am on safe kernel i do not have to worry about being on a cm9 rom before i flash JB(cm10 based)?
Click to expand...
Click to collapse
As long as you are on safe kernel you don't have to worry about anything or to revert back to GB. Just keep flashing rom with full wipes. Its enough for you.....
So, i am trying to back up through CWM on hydracore, it gets soooo close to the end and then says there was an error backing up the data, any ideas on what this is or a remedy for it?
I dont really want to flash a rom without doing the backup... even though in the past, i have done (old phone) is it imperritive to make a backup?
curlymanoliver said:
So, i am trying to back up through CWM on hydracore, it gets soooo close to the end and then says there was an error backing up the data, any ideas on what this is or a remedy for it?
I dont really want to flash a rom without doing the backup... even though in the past, i have done (old phone) is it imperritive to make a backup?
Click to expand...
Click to collapse
What exactly you want to backup from old rom, apps? If so then use titanium backup. I never backup whole rom as it hardly takes 15-20 minutes to setup rom if you have backup of apps.
Sent from my GT-N7000
Didnt bother with it in the end, thanks for he help though guys, got the latest version of PA running on it and its awesome, thanks agiain
Oliver
i think you lose s-note capability with paranoid android.
confirm any1 ?
bebseh said:
i think you lose s-note capability with paranoid android.
confirm any1 ?
Click to expand...
Click to collapse
Yes, as with any AOKP/ CM9 based rom..
There are alternative apps that could be used.
Otherwise, there are some excellent choices when it comes to Touchwiz-based roms as well.
Some are available themed to the AOKP look, if you prefer.
bebseh said:
i think you lose s-note capability with paranoid android.
confirm any1 ?
Click to expand...
Click to collapse
Gnote and papryus are the best alternatives.
Swyped From My Juicy Flavoured AOKP JB.
I was wondering if it is possible to get a proper working rom if I were to take the gapps zip file from one rom and flash it with a different rom? Or are gapps rom specific and won't work with any other rom than it's intended rom?
Att.Fan1982 said:
I was wondering if it is possible to get a proper working rom if I were to take the gapps zip file from one rom and flash it with a different rom? Or are gapps rom specific and won't work with any other rom than it's intended rom?
Click to expand...
Click to collapse
Gapps are ROM specific for many custom roms, as the developer has tweaked it to be compatible with his rom. I dont think it if you flash Gapp of one ROM with any other ROM it will work.
What exactly do you have in mind.. Which Gapp & ROM do you need to flash?
Yin-Yang said:
What exactly do you have in mind.. Which Gapp & ROM do you need to flash?
Click to expand...
Click to collapse
I really like the black gapps of the BlackCNA rom and wanted to flash that with utacka paranoid android latest nightly build rom.
Att.Fan1982 said:
I really like the black gapps of the BlackCNA rom and wanted to flash that with utacka paranoid android latest nightly build rom.
Click to expand...
Click to collapse
Although I like flashing & experimenting, I have not tried doing this & I doubt it will work.
Att.Fan1982 said:
I really like the black gapps of the BlackCNA rom and wanted to flash that with utacka paranoid android latest nightly build rom.
Click to expand...
Click to collapse
Well, go ahead and try it. The worst case scenario is you'll have to reflash PA.
Side note: I flashed Gapps for Nexus 7 on N7000 CM Rom and it worked. You never know if you don't try.
So far the flash is working good
Sent From An Awesome Jelly Bean'd Galaxy Note
I tried to install the custom rom "AndroidParanoid"
with Rom Stock 4.1.2 XXLQE
and meanwhile the install its wrote: Installation Aborted
why ?
i really want this rom , its the perfect rom for me !
ReaLioR said:
I tried to install the custom rom "AndroidParanoid"
with Rom Stock 4.1.2 XXLQE
and meanwhile the install its wrote: Installation Aborted
why ?
i really want this rom , its the perfect rom for me !
Click to expand...
Click to collapse
Have you rooted your phone? Also you need custom recovery such as cwm to flash paranoid.
Here is the guide for rooting and installing temporary cwm on your phone.
Hope this helps.
arffrhn said:
Have you rooted your phone? Also you need custom recovery such as cwm to flash paranoid.
Here is the guide for rooting and installing temporary cwm on your phone.
Hope this helps.
Click to expand...
Click to collapse
Yes my phone is rooted
and i used CWM ...
Hmm this is PA 3.60. That issue is known and this rom is still not for daily use man. If you want something 4.2.2 go look for pac-man or cm10.1. If you still want PA, you can check out pa 2.99 thread.
arffrhn said:
Hmm this is PA 3.60. That issue is known and this rom is still not for daily use man. If you want something 4.2.2 go look for pac-man or cm10.1. If you still want PA, you can check out pa 2.99 thread.
Click to expand...
Click to collapse
oh i didnt saw this thread :silly:
thank you very much !
PROBLEM SOLVED
arffrhn said:
Hmm this is PA 3.60. That issue is known and this rom is still not for daily use man. If you want something 4.2.2 go look for pac-man or cm10.1. If you still want PA, you can check out pa 2.99 thread.
Click to expand...
Click to collapse
sorry on the double post
but , how can i put the Nexus buttons in PA ?
this is only for PA 3.60 ? or its works on 2.99 too ?
i dont have problem to install 3.60 , because i really want this nexus buttons
ReaLioR said:
sorry on the double post
but , how can i put the Nexus buttons in PA ?
this is only for PA 3.60 ? or its works on 2.99 too ?
i dont have problem to install 3.60 , because i really want this nexus buttons
Click to expand...
Click to collapse
About that, I can't help you cause I've never tried PA. Maybe someone else can answer this for you.