hey guys i have a problem everytime i use this rom or the sniznex one all is ok but when i shut down and boot up my phone or when i reboot it the device doesn't detect any sim card and i can't phone or send messages... please help me cuz every time it doesnt detect my sim card i have to wipe data and then works but if i reboot again it doesn't detect the sim...
i mean miui gb rom...
MIUI roms are not stable on out device.
MAD_psycho_Zz said:
hey guys i have a problem everytime i use this rom or the sniznex one all is ok but when i shut down and boot up my phone or when i reboot it the device doesn't detect any sim card and i can't phone or send messages... please help me cuz every time it doesnt detect my sim card i have to wipe data and then works but if i reboot again it doesn't detect the sim...
Click to expand...
Click to collapse
Use some other rom...
MAD_psycho_Zz said:
hey guys i have a problem everytime i use this rom or the sniznex one all is ok but when i shut down and boot up my phone or when i reboot it the device doesn't detect any sim card and i can't phone or send messages... please help me cuz every time it doesnt detect my sim card i have to wipe data and then works but if i reboot again it doesn't detect the sim...
Click to expand...
Click to collapse
Try to do a full, clean install. That means wiping everything, not just data, also wipe cache, and dalvik cache. Have you done that?
Related
Everytime I flash a rom i have no signal.
I've flashed before and never had this problem.
I flash to stock, master clear, flash rom with sd and sim out and usb unplugged.
When the rom finishes flashing the phone doesn't recognize that the sim card is out. When I put the sim card in there still is no signal.
The only time i have signal is when im in stock so it can't be the sim card.
Help please!
Could be your APN settings are getting wiped when your installing the ROM.
What is the ROM you are attempting to flash?
yongcho93 said:
Everytime I flash a rom i have no signal.
I've flashed before and never had this problem.
I flash to stock, master clear, flash rom with sd and sim out and usb unplugged.
When the rom finishes flashing the phone doesn't recognize that the sim card is out. When I put the sim card in there still is no signal.
The only time i have signal is when im in stock so it can't be the sim card.
Help please!
Click to expand...
Click to collapse
What rom are you flashing? Some kernels will do this to you if you reboot the phone while it is connected to your computer.
do the whole flash with the USB disconnected, from start to finish
yongcho93 said:
Everytime I flash a rom i have no signal.
I've flashed before and never had this problem.
I flash to stock, master clear, flash rom with sd and sim out and usb unplugged.
When the rom finishes flashing the phone doesn't recognize that the sim card is out. When I put the sim card in there still is no signal.
The only time i have signal is when im in stock so it can't be the sim card.
Help please!
Click to expand...
Click to collapse
Use a different MODEM
avgjoegeek said:
Could be your APN settings are getting wiped when your installing the ROM.
What is the ROM you are attempting to flash?
Click to expand...
Click to collapse
im trying to flash phoenix 2.5
avgjoegeek said:
Could be your APN settings are getting wiped when your installing the ROM.
What is the ROM you are attempting to flash?
Click to expand...
Click to collapse
Im trying to flash phoenix 2.5.
i've used axuraCE 2.5.1 and it worked fine
one more thing to add. when i flash a rom other than the stock the baseband version is unknown and imei and imei sv are both unknown too
yongcho93 said:
im trying to flash phoenix 2.5
Click to expand...
Click to collapse
I have had this same thing happen a couple times with Phoenix and it is frustrating to say the least..
Here's what I did...I charged the battery till it was full when I was at stock..then..Re download the rom..update zip file and the theme if using one again...sometimes you can have a bad download..and it can cause problems...
Pull your Sim card..and your sd card out...and leave them out..and flash stock and master clear again..
Unplug your USB cable...
Then..go back in and re-enable usb debugging and notify on connection.
Plug your usb cable back in and mount the internal drive..Verify your internal drive has been wiped..If it has..then proceed...if not..master clear again..
Once everything has been wiped..and you have re-enabled usb debugging...remount your internal drive by turning off usb storage and copy the update.zip file and the rom and theme if using one back over.Make sure it says update.zip...not update.zip.zip...it it says the later under properties of the file..change it otherwise it won't install.
Unplug your usb cable
Now reboot into 2e recovery..and re-install your packages 2 times from there so it will give you the green recovery menu..not the blue one.Now choose the rom from the recovery install from sd card..and flash the rom...
Once you have fully flashed the rom..stay in recovery by booting back to recovery...It should have changed colors and now be red...Now choose your theme if using one and flash it...reboot back into recovery and do a back up of everything...
Once this has been completed...re-boot you phone again...and charge it completely again..Once it is charged completely..power it off and pull the battery..Once you have the battery out..Gently wipe off your sim card contacts..and insert it correctly all the way into the phone..The angled end on the right hand side is showing...Make sure it is all the way in...Gently press the top of the holder to make sure it has good contact...Once you have done this...turn your phone on...It may show up right away..or may take a couple minutes for it to connect...but you should have your connection now...
If this doesn't work..I don't know what to tell you other than try this all again with a different rom..
Good Luck
Mac
Mac11700 said:
I have had this same thing happen a couple times with Phoenix and it is frustrating to say the least..
Here's what I did...I charged the battery till it was full when I was at stock..then..Re download the rom..update zip file and the theme if using one again...sometimes you can have a bad download..and it can cause problems...
Pull your Sim card..and your sd card out...and leave them out..and flash stock and master clear again..
Unplug your USB cable...
Then..go back in and re-enable usb debugging and notify on connection.
Plug your usb cable back in and mount the internal drive..Verify your internal drive has been wiped..If it has..then proceed...if not..master clear again..
Once everything has been wiped..and you have re-enabled usb debugging...remount your internal drive by turning off usb storage and copy the update.zip file and the rom and theme if using one back over.Make sure it says update.zip...not update.zip.zip...it it says the later under properties of the file..change it otherwise it won't install.
Unplug your usb cable
Now reboot into 2e recovery..and re-install your packages 2 times from there so it will give you the green recovery menu..not the blue one.Now choose the rom from the recovery install from sd card..and flash the rom...
Once you have fully flashed the rom..stay in recovery by booting back to recovery...It should have changed colors and now be red...Now choose your theme if using one and flash it...reboot back into recovery and do a back up of everything...
Once this has been completed...re-boot you phone again...and charge it completely again..Once it is charged completely..power it off and pull the battery..Once you have the battery out..Gently wipe off your sim card contacts..and insert it correctly all the way into the phone..The angled end on the right hand side is showing...Make sure it is all the way in...Gently press the top of the holder to make sure it has good contact...Once you have done this...turn your phone on...It may show up right away..or may take a couple minutes for it to connect...but you should have your connection now...
If this doesn't work..I don't know what to tell you other than try this all again with a different rom..
Good Luck
Mac
Click to expand...
Click to collapse
thx! ill try this later tonight. and get back to you
yongcho93 said:
thx! ill try this later tonight. and get back to you
Click to expand...
Click to collapse
Just so you know...You won't get the AT&T showing right away...with Phoenix...you will see the signal bars and a H...or 3g...or edge...After you get your connection..if you have wi-fi at home and have a secure setting to access it..you will have to log back into it again..I usually turn the phone off for about 1/2 hour...and then turn it back on and let it sit for about the same..When I come back to it...The AT&T is showing like it should and everything is fine..
Mac
Mac11700 said:
Just so you know...You won't get the AT&T showing right away...with Phoenix...you will see the signal bars and a H...or 3g...or edge...After you get your connection..if you have wi-fi at home and have a secure setting to access it..you will have to log back into it again..I usually turn the phone off for about 1/2 hour...and then turn it back on and let it sit for about the same..When I come back to it...The AT&T is showing like it should and everything is fine..
Mac
Click to expand...
Click to collapse
btw when ur sim card is out is there a notice on the top bar that there is no sim card like there is on stock?
yongcho93 said:
btw when ur sim card is out is there a notice on the top bar that there is no sim card like there is on stock?
Click to expand...
Click to collapse
No..just a circle with a cross thru it.On stock it says something like for emergency calls only.
Mac
yongcho93 said:
one more thing to add. when i flash a rom other than the stock the baseband version is unknown and imei and imei sv are both unknown too
Click to expand...
Click to collapse
Certain Roms write data to your NV_data
(i think it was JPC leak from I9000 that was the first one. it changed everyones product code to I897ZKAKOR)
Axura changes the product code to I959ZKATMB or something like that
The Correct Product code for our Captivate is I897ZKAATT.
If your IMEI says 004999010640000 this is incorrect also and you may find your phone to stop making calls as this is like a debugging or prototype imei
Finally, if your unlock code is FFFFFFFF, you need this repair in order to unlock your code
All of these can be fixed with Helroz's Repair_nv_data.zip Found Here: http://perso.numericable.fr/helroz/P...ir_nv_data.zip
I did not create the software or any of the instructions, THis is credited to Helroz in the vibrant forum (please thank and donate to him) he came up with all of this, Im just sharing knowlage.
hi everybody
i have samsung galaxy s.
yesterday i tried to install new rom. i have entered to recovery mode and did:
1) Wipe Data/factory reset
2)Wipe Cache
3)Wipe Dalvik-cache
4)mouts and storage and then format/system
5)Install Zip from SD card
when i did , the device could not recgonize the sd card and write me an erorr message.
people in other forums told me to install stock rom.
i did it.
i have download odin and tried to burn the stock rom. everything was ok.
the burn completed.
when i plugged out the phone from the usb port, the phone turned on and shows me at&t logo Flickering.
i cant enter recovery mode or download mode. only the logo Flickering.
someone please can help me?
i am helpless?
thank u all
crmadrid said:
hi everybody
i have samsung galaxy s.
yesterday i tried to install new rom. i have entered to recovery mode and did:
1) Wipe Data/factory reset
2)Wipe Cache
3)Wipe Dalvik-cache
4)mouts and storage and then format/system
5)Install Zip from SD card
when i did , the device could not recgonize the sd card and write me an erorr message.
people in other forums told me to install stock rom.
i did it.
i have download odin and tried to burn the stock rom. everything was ok.
the burn completed.
when i plugged out the phone from the usb port, the phone turned on and shows me at&t logo Flickering.
i cant enter recovery mode or download mode. only the logo Flickering.
someone please can help me?
i am helpless?
thank u all
Click to expand...
Click to collapse
i think ur phone is bricked...
so i recommend u use USB jig to get back into download mode...U can check the video below
http://www.youtube.com/watch?v=1RoZU...e_gdata_player
hope it works...
tell me ur status after this..
If my post helped, don't mind hitting THANKS
and if the JIG wont help send me a message and I will tell you how to get into download mode
hassanalip21 said:
and if the JIG wont help send me a message and I will tell you how to get into download mode
Click to expand...
Click to collapse
Is there any other way too?
If my post helped, don't mind hitting THANKS
the battery of my phone died and i pluged it in to the charger, but the damn phone won't boot up!!
i'm using cm10.1 and all i see is the cyanogenmod boot animation but the device won't start' it's stuck in the bootloop for almost an hour!!!
cwm recovery is accessible
what can i do??
idan_abargel said:
the battery of my phone died and i pluged it in to the charger, but the damn phone won't boot up!!
i'm using cm10.1 and all i see is the cyanogenmod boot animation but the device won't start' it's stuck in the bootloop for almost an hour!!!
cwm recovery is accessible
what can i do??
Click to expand...
Click to collapse
Try to factory reset your device and if this isn't working try to flash the rom again.
YDrOiD2500 said:
Try to factory reset your device and if this isn't working try to flash the rom again.
Click to expand...
Click to collapse
i can't re-install the rom because i do not have it in the sd card and i can't turn on the phone, ergo, i can't copy the rom into sd card
YDrOiD2500 said:
Try to factory reset your device and if this isn't working try to flash the rom again.
Click to expand...
Click to collapse
i did wipe data\factory reset and it works!!
idan_abargel said:
i can't re-install the rom because i do not have it in the sd card and i can't turn on the phone, ergo, i can't copy the rom into sd card
Click to expand...
Click to collapse
take sd out and insert in other phone or sd adapter and paste rom there...return sd in your phone and reinstal rom from cwm.
idan_abargel said:
i can't re-install the rom because i do not have it in the sd card and i can't turn on the phone, ergo, i can't copy the rom into sd card
Click to expand...
Click to collapse
well u can install TWRP recovery it allows u to access ur SD card when in recovery mode. hope this helps ya
librend said:
well u can install TWRP recovery it allows u to access ur SD card when in recovery mode. hope this helps ya
Click to expand...
Click to collapse
yes use TWRP or you can push files to you sd with adb,fastboot,and some other programs ...let me know if you need guide.hope yo solved problem .
Dear htc users
I'm facing a problem with my htc desire 500 but i guess all android users 4.1 can relate or help me
i dropped my phone and it was turned off i piked it up and i turned it on back again to find out that all my sd apps are facing an issue and i cant seem to open them ( as in the picture) ( though i can access all my media files on the sd !!!!) i can re install the app but it will be installed on my internal storage not my sd so i factory reset the phone..
and it didn't helped in anything.. all the apps were gone but still i cant move any app to my sd card
few days have passed and i started to receive the msg "unfortunately, com.android.settings has stopped" and i cant open my setting anymore and the settings icon has changed (as shown in the picture)
Please i need help i only bought this phone like few months ago
Please advise
genius911 said:
Dear htc users
I'm facing a problem with my htc desire 500 but i guess all android users 4.1 can relate or help me
i dropped my phone and it was turned off i piked it up and i turned it on back again to find out that all my sd apps are facing an issue and i cant seem to open them ( as in the picture) ( though i can access all my media files on the sd !!!!) i can re install the app but it will be installed on my internal storage not my sd so i factory reset the phone..
and it didn't helped in anything.. all the apps were gone but still i cant move any app to my sd card
few days have passed and i started to receive the msg "unfortunately, com.android.settings has stopped" and i cant open my setting anymore and the settings icon has changed (as shown in the picture)
Please i need help i only bought this phone like few months ago
Please advise
Click to expand...
Click to collapse
Put out sdcard then put in! than make full format of sdcard. Remember all your files on sdcard will be deleted then make a backup..
i tried a new sd and still the same problem ... do u think it may be a damaged pin from when it fell off? and still this dos not fix my "com.android.settings has stopped" Problem
thank you
genius911 said:
i tried a new sd and still the same problem ... do u think it may be a damaged pin from when it fell off? and still this dos not fix my "com.android.settings has stopped" Problem
thank you
Click to expand...
Click to collapse
You have stock Rom?
genius911 said:
i tried a new sd and still the same problem ... do u think it may be a damaged pin from when it fell off? and still this dos not fix my "com.android.settings has stopped" Problem
thank you
Click to expand...
Click to collapse
Flash stock to make sure it isn't a software problem. Can you access your sdcard via your computer?
vampir74 said:
You have stock Rom?
Click to expand...
Click to collapse
yes its a stock rom and not rooted
dummie999 said:
Flash stock to make sure it isn't a software problem. Can you access your sdcard via your computer?
Click to expand...
Click to collapse
what do u mean by flash stock??
and yes i can access sdcard via pc
genius911 said:
what do u mean by flash stock??
and yes i can access sdcard via pc
Click to expand...
Click to collapse
Than sd card is ok. You make the update to the last version of firmware?
vampir74 said:
Than sd card is ok. You make the update to the last version of firmware?
Click to expand...
Click to collapse
i tried once it failed in mid procedure and now i cant try it again because i cant access the settings
You must go in recovery screen ok do this put out the battery then insert the batterry press and hold in same time power and vol- and will come the recovery screen then make factory reset ....
---------- Post added at 09:37 AM ---------- Previous post was at 09:31 AM ----------
You will see on screen have fastboot recovery and ... Make factory reset and try go to recovery maybe will continue the update procedure u not delete the sdcard. The problem comes because you update process not finish well...
Not go in this way you must unlock your bootloder, then flash cwm recovery with fastboot, then flash a stock Rom or custom...
you are right my update didn't finish well i am going to try this asap thank you very mush
genius911 said:
you are right my update didn't finish well i am going to try this asap thank you very mush
Click to expand...
Click to collapse
after the factory reset im on soft brik
my phone is on soft brick it cant even boot its stuck on the white screen
i have been told that i can re install the htc official default software and rom and all of that if you can please tell me how and send me the links
thank you
http://forum.xda-developers.com/showthread.php?t=2804938
Sent from my B1-730HD
UPDATE : Problem Solved
Will , The problem was only the SD CARD !!!
yeah the phone doesn't boot up without an SD card
And after insert a SD CARD , now it's working fine
Thank you for reading my thread , and I hope the solution can help you to fix your problem too
Good luck guys
Hello guys , Please help me to unbrick my phone
First the phone was my dad phone , very slow phone
anyway he told me to do a format to it . So from the phone I did a normal reset and than the phone rebooted and took me to the recovery mode , so I wiped the data and cache and then I press reboot .
And after that the phone stuck on the Samsung boot-loop.
So I tried to flash it with stock frameworks using Odin3 v1.7 and Odin3 v1.82 but nothing the flash process was fine without any problems and it take me to recovery and Wiped data and cache ... reboot but again the same problem 'The Samsung boot-loop'
PS : Stock framework that I used :
GT_I9000_JPJPF_JXJPD_OJPJPF
GT_I9000_JPJPG_JXJPE_OJPJPF
GT_I9000_JPJPM_JXJPF_OJPJPL
GT_I9000_JPJVC_JXJV6_OJPJV7_Sbl
GT_I9000_XWJVZ_XXJVT_OXXJV9_Sbl
Please guys any solution to this problem