[Q] Flashed Abyss Kernel Now My SGN wont turn on :( - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Just as the title says. i was planning to flash Liquidsmooth and the instructions say to flash the kernel before the rom and reboot recovery. the kernel flashed fine then once i rebooted it wont turn back on. can someone help me please?

g1junky said:
Just as the title says. i was planning to flash Liquidsmooth and the instructions say to flash the kernel before the rom and reboot recovery. the kernel flashed fine then once i rebooted it wont turn back on. can someone help me please?
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?t=1257434
To force your phone into Download mode !
The you flash a GB rom through PC odin.

tknguyencsu said:
Try this
http://forum.xda-developers.com/showthread.php?t=1257434
To force your phone into Download mode !
The you flash a GB rom through PC odin.
Click to expand...
Click to collapse
thank you ! ill give this a try

Related

[Q] My G-note got crashed, please help me...

My G-note (N7000) got crashed, please help me…………
After flash N7000XXLS2 my G-Note not booting up anymore. It’s stuck on Samsung logo after the boot animation.
Please help me to load N7000XXLS2 or go back to ICS.
Thanks in advance.
musheercmr said:
My G-note (N7000) got crashed, please help me…………
After flash N7000XXLS2 my G-Note not booting up anymore. It’s stuck on Samsung logo after the boot animation.
Please help me to load N7000XXLS2 or go back to ICS.
Thanks in advance.
Click to expand...
Click to collapse
stuck in Samsung logo just mean you need to just fullwipe factory in CMW. but be sure you are on safe kernel such as Speedmode or Hydracore before wiping.. i dont know if xxls2 kernel is brick free or not. but stucking at samsung logo has always been solved by fullwipe factory in my case
mistajoe83 said:
stuck in Samsung logo just mean you need to just fullwipe factory in CMW. but be sure you are on safe kernel such as Speedmode or Hydracore before wiping..
Click to expand...
Click to collapse
I did full wipe but still the same .
and now how can i load safe kernel? or any other advise to fix ?
thank you.
musheercmr said:
My G-note (N7000) got crashed, please help me…………
After flash N7000XXLS2 my G-Note not booting up anymore. It’s stuck on Samsung logo after the boot animation.
Please help me to load N7000XXLS2 or go back to ICS.
Thanks in advance.
Click to expand...
Click to collapse
It takes some time to boot up after you flash a rom..just wait for few minutes and see if it boots up
And how did you flash the rom..i mean what rom,kernel and did you do the wipes
rajsekhar.300 said:
It takes some time to boot up after you flash a rom..just wait for few minutes and see if it boots up
And how did you flash the rom..i mean what rom,kernel and did you do the wipes
Click to expand...
Click to collapse
that is correct. takes times. but if you waited more than 10 minutes try flashing other rom.. safest method is pc odin.
rajsekhar.300 said:
It takes some time to boot up after you flash a rom..just wait for few minutes and see if it boots up
And how did you flash the rom..i mean what rom,kernel and did you do the wipes
Click to expand...
Click to collapse
I was waiting more than a hours and i tried to Flash ICS by odin-3, that one also failed
i was in N7000DDLR9 ROM. then i flash N7000XXLS2 by mobi-odin
musheercmr said:
I did full wipe but still the same .
and now how can i load safe kernel? or any other advise to fix ?
thank you.
Click to expand...
Click to collapse
tell us how you flash it. via PC ODIN or ClockWorkMOD.?
as for the kernel if you have Extrnal sdcard then download SpeedMod 3-15 or Hydracore kernel than put that in your external Sdcard. Open CMW than flash the kernel then go to advance>reboot recovery.. wait for recovery rebooted than you are safe to flash other rom.
---------- Post added at 07:28 AM ---------- Previous post was at 07:20 AM ----------
look here.. theres a tutorial of flashing with PC ODIN + Firmware download..
the instruction is detailed and clear.. this should help you the most.
http://forum.xda-developers.com/showthread.php?t=1424997
musheercmr said:
I was waiting more than a hours and i tried to Flash ICS by odin-3, that one also failed
i was in N7000DDLR9 ROM. then i flash N7000XXLS2 by mobi-odin
Click to expand...
Click to collapse
How could you flash xxls2(jb leak) using pc odin..you need to do it using cwm
And what kernel were u on when you flashed xxls2
rajsekhar.300 said:
How could you flash xxls2(jb leak) using pc odin..you need to do it using cwm
And what kernel were u on when you flashed xxls2
Click to expand...
Click to collapse
finally i got installed ICS 4.0.4 (N7000DDLR6) by PC-Odin. thank you guys.
So from now, can you please advise, how can i flash JB (N7000XXLS2 LEAK). @ present my phone is not rooted. and running on fully stoke ROM N7000DDLR6. advise please...
musheercmr said:
finally i got installed ICS 4.0.4 (N7000DDLR6) by PC-Odin. thank you guys.
So from now, can you please advise, how can i flash JB (N7000XXLS2 LEAK). @ present my phone is not rooted. and running on fully stoke ROM N7000DDLR6. advise please...
Click to expand...
Click to collapse
First flash a safe kernel(like philz,hydracore or speedmod) and then flash the jb rom through cwm
rajsekhar.300 said:
First flash a safe kernel(like philz,hydracore or speedmod) and then flash the jb rom through cwm
Click to expand...
Click to collapse
since you flash through PC ODIN means everything is stocked. Means the brick bug is present. you now only have samsung stock recovery and not ClockWorkMod.
if you are planning to install just Samsung Stock Rom then this step is applicable here
http://techie-buzz.com/android/samsung-galaxy-note-jelly-bean-firmware-leaks.html
or
http://din.huluselangor.net/?p=21813&replytocom=5359&wpmp_switcher=mobile
if you are planning install xxls2 custom then you must first root your phone then install CMW and Flash Desired rom with safe kernel installed
look here for tutorial
http://forum.xda-developers.com/showthread.php?t=1329360
mistajoe83 said:
since you flash through PC ODIN means everything is stocked. Means the brick bug is present. you now only have samsung stock recovery and not ClockWorkMod.
if you are planning to install just Samsung Stock Rom then this step is applicable here
http://techie-buzz.com/android/samsung-galaxy-note-jelly-bean-firmware-leaks.html
or
http://din.huluselangor.net/?p=21813&replytocom=5359&wpmp_switcher=mobile
if you are planning install xxls2 custom then you must first root your phone then install CMW and Flash Desired rom with safe kernel installed
Click to expand...
Click to collapse
i tried the same as from 1st link, flashing by PC-Odin N7000XXLS2 (LEAK). but giving me FAIL! when i click start
i am using Odin 1.87, is that make any issue ?
musheercmr said:
i tried the same as from 1st link, flashing by PC-Odin N7000XXLS2 (LEAK). but giving me FAIL! when i click start
i am using Odin 1.87, is that make any issue ?
Click to expand...
Click to collapse
From where did you download the rom..it it was downloaded from sammobile or from that hotfile link,then you should flash it through pc odin
And if its a custom rom that you downloaded from the xda,then it should be flashed through cwm
the Sam mobile and the hot link are the same. youncan flash the rom using pc odin. but before that put the philz kernel xxls2 in the external sd. so that after the flash using odin, you can boot into recovery and flash that kernel and be safe and do the wipe.
nokiamodeln91 said:
the Sam mobile and the hot link are the same..
Click to expand...
Click to collapse
Yes i know..i said that just to make it clear for the op
Gents, Can you please clarify before I am going to do below. And advise if this is the proper way.
• Flash GB (2.3.6) and wipe
• Then flash ICS (4.0.4)
• Download Notecore (or Speedmod, CF root kernel) kernel and flash by PC-Odin
• Then copy N7000XXLS2 (LEAK) to SD card.
• Boot to CWM recovery, then flash from SD, restart.
Thanks.
musheercmr said:
Gents, Can you please clarify before I am going to do below. And advise if this is the proper way.
• Flash GB (2.3.6) and wipe
• Then flash ICS (4.0.4)
• Download Notecore (or Speedmod, CF root kernel) kernel and flash by PC-Odin
• Then copy N7000XXLS2 (LEAK) to SD card.
• Boot to CWM recovery, then flash from SD, restart.
Thanks.
Click to expand...
Click to collapse
All those steps are correct if you are about to flash a leaked jb rom
If its a leaked custom jb rom,then you need to flash it through cwm
[email protected]$3K#@R said:
All those steps are correct if you are about to flash a leaked jb rom
If its a leaked custom jb rom,then you need to flash it through cwm
Click to expand...
Click to collapse
still am in stuck.
now i have N7000DDLR9 (ICS 4.0.4) without root. then i tried to flash N7000XXLS2 (LEAK) by PC-Odin, i am getting failed.
can you please explain step by step, how do from N7000DDLR9 (without root)
thanks.
musheercmr said:
still am in stuck.
now i have N7000DDLR9 (ICS 4.0.4) without root. then i tried to flash N7000XXLS2 (LEAK) by PC-Odin, i am getting failed.
can you please explain step by step, how do from N7000DDLR9 (without root)
thanks.
Click to expand...
Click to collapse
What was the error you got in the pc odin
paste the odin logs that show failed

Rom Mess up

Hi guys
I really need you help...
I have a samsung Ace .. i had this rom: [ROM] [Stock] [Nims 11 Mem Hack / BE 1.6 Kernel] S'Perience ROM ®
with clockwork recovery and of course root
then i want to try the stock rom version 2.3.6 TPH (Portugal) .. I went to sammobile downloaded that rom and odin with ops... after all of the process the odin shows up the message "pass" with blue color but my phone was blinking.. and now it only does that, blinking.. i´m not able to enter on recovery mode or on the mobile itself... only able to get download mode..
Pleasee some help!
someone ?!
Try to install the CWM recovery for Odin: http://forum.xda-developers.com/showthread.php?t=1465599
And then a Custom ROM.
maniaczek1111 said:
Try to install the CWM recovery for Odin: http://forum.xda-developers.com/showthread.php?t=1465599
And then a Custom ROM.
Click to expand...
Click to collapse
I have already tried that without sucess .. After I install anything from odin it keeps blinking
AnonFreitas said:
I have already tried that without sucess .. After I install anything from odin it keeps blinking
Click to expand...
Click to collapse
pleaseeeee...
Reflash stock via odin. Your device mightn't boot for the first time. Then reconnect & reflash via odin right away. Your device will boot. If it doesn't, take off the battery & put it back, go to recovery mode & do a factory reset & reboot. It should work. But before doing all this, remember, close all the intervening programs like kies,etc & make sure you have the latest device drivers installed.
Sent from my GT-S5830 using xda premium

Help Please

I have flashed my phone many times with no issue. I just tried to flash a new rom and am stuck in boot screen. I can reboot into recovery mode and have tried starting the process afresh by loading phil base rom etc, all works but still get stuck in boot screen. Can anyone please help.
Have try with odin too?
remondt said:
Have try with odin too?
Click to expand...
Click to collapse
No - not sure what rom I should flash with ODIN and not used it before. I don't have stock rom
I don't know if it helps. Whatever rom I try to flash through normal recovery mode, other than phils base rom, comes up with a zip error as it starts to load.
plasticpig72 said:
I don't know if it helps. Whatever rom I try to flash through normal recovery mode, other than phils base rom, comes up with a zip error as it starts to load.
Click to expand...
Click to collapse
flash only with philz kernel after proper wipes, also you can try to install the stock kernel of the custom rom for eg CM10.1 kernel and then try. Moreover if you would like to go back to stock kernel first and then try the custom rom , you can refer to this tutorial and download link for stock rom:
http://forum.xda-developers.com/showthread.php?t=1424997
edit: forgot to mention, have you tried wiping cache and dalvik cache when you get stuck on bootloop?
plasticpig72 said:
No - not sure what rom I should flash with ODIN and not used it before. I don't have stock rom
Click to expand...
Click to collapse
download any stock roms from Sam mobile and follow these instructions
Flashing Instructions:
- Unzip the file
- Open Odin 3.04 (Get it from HERE)
- Restart phone in download mode (Home+power+vol down)
- Connect phone and wait until you get a yellow sign in Odin
- Add CODE_N7000XXLSA_549786_REV02_user_low_ship.tar.md5 to PDA
- Add MODEM_N7000XXLSA_REV_05_CL1222228.tar.md5 to PHONE
- Add CSC_OXA_N7000OXALSA_549786_REV02_user_low_ship.tar.md5 to CSC
- Make sure re-partition NOT ticked
- Start flash, sit back and wait a few minutes.
source: http://www.sammobile.com/2012/11/28/n7000xxlsa-–-galaxy-note-android-4-1-2-jelly-bean-test-firmware/
http://forum.xda-developers.com/showthread.php?t=1424997
:thumbup:
Sent from my GT-N7000 using xda premium

[Q]Bootloop & No recovery Mode

Hello everyone ! I have a samsung galaxy s3 mini i8190
I flash CM , but i didn't like it so i tried to install with odin the original firmware.
Problem: Bootloop (logo Samsung Galaxy S3 Mini reboot infinite loop)
I can't enter in Recovery Mode, only i can enter in Download Mode
I use ODIN to try to install CWM , but still don't work..
And i have another problem. When I click start (in odin) it stops at SetupConnection, but if I disconnect & reconnect (usb) it starts flashing.
Please, help me.
Try to flash stock recovery instead of CWM.
tys0n said:
Try to flash stock recovery instead of CWM.
Click to expand...
Click to collapse
"I use ODIN to try to install CWM , but still don't work.."
I said this in the thread. If i'm wrong, please correct me.
Your kernel is f****ed up. You need to find any rooted stock kernel, flash it with Odin and then flash CWM. You don't need whole ROM, only kernel. Happened to me a lot while I was still on SGS1.
As for connection problem, perhaps clearing all drivers from your win and reinstall them could help.
Vladdyak47 said:
"I use ODIN to try to install CWM , but still don't work.."
I said this in the thread. If i'm wrong, please correct me.
Click to expand...
Click to collapse
Yes you did, but I asked you to try with STOCK RECOVERY instead.
It's not always a part of the official firmware package.
stenc55 said:
Your kernel is f****ed up. You need to find any rooted stock kernel, flash it with Odin and then flash CWM. You don't need whole ROM, only kernel. Happened to me a lot while I was still on SGS1.
As for connection problem, perhaps clearing all drivers from your win and reinstall them could help.
Click to expand...
Click to collapse
Can you help me with the link? Flash with PDA, right? (select PDA files, connect the device and click start)
Which one is good? http://forum.xda-developers.com/showthread.php?t=2187295
P.S. : I resolved the problem with connection
P.S.2: In Download Mode i have "CUSTOM BINARY DOWNLOAD: YES (3 counts) :|
P.S.3: When i try to flash a original firmware, after device restart it's an android charging something
EDIT: Now i have a new problem: FIRMWARE UPDRAGE ENCOUNTERED AN ISSUE. PLEASE SELECT RECOVERY MODE IN KIES & TRY AGAIN
Vladdyak47 said:
Can you help me with the link? Flash with PDA, right? (select PDA files, connect the device and click start)
Which one is good? http://forum.xda-developers.com/showthread.php?t=2187295
P.S. : I resolved the problem with connection
P.S.2: In Download Mode i have "CUSTOM BINARY DOWNLOAD: YES (3 counts) :|
P.S.3: When i try to flash a original firmware, after device restart it's an android charging something
EDIT: Now i have a new problem: FIRMWARE UPDRAGE ENCOUNTERED AN ISSUE. PLEASE SELECT RECOVERY MODE IN KIES & TRY AGAIN
Click to expand...
Click to collapse
Download service firmware and solve all your problems
Then just flash whatever rom you'd like.
Thanks a lot tys0n ! My Phone works now!
Mine has the same problem! I flashed kernels and params as well!
stenc55 said:
Your kernel is f****ed up. You need to find any rooted stock kernel, flash it with Odin and then flash CWM. You don't need whole ROM, only kernel. Happened to me a lot while I was still on SGS1.
As for connection problem, perhaps clearing all drivers from your win and reinstall them could help.
Click to expand...
Click to collapse
Solved !!! Thank you very very much, for all of u.. Worked ... Finally i can enter recovery mode and turn on my s3 mini.. . thanks XDA n really sorry for my english
stenc55 said:
Your kernel is f****ed up. You need to find any rooted stock kernel, flash it with Odin and then flash CWM. You don't need whole ROM, only kernel. Happened to me a lot while I was still on SGS1.
As for connection problem, perhaps clearing all drivers from your win and reinstall them could help.
Click to expand...
Click to collapse
What if my device cant be recognised by my pc. Ive tried every pc/laptop I own with different OS. So basically I have a bootloop stuck phone with no recovery mode available and it doesnt connect to the pc. Is there any way to fix that? Or is the phone completely bricked and I cant do anything about it.
PS: I have tried installing latest samsung drivers on my pc but it still cant recognise the phone.
Have had this phone for 6 years and it was ****ing amazing. I missed this little guy and want to fix him just as a "souvenir" since it was my first ever smartphone.

galaxy advance s boot stuck problem

hello my galaxy s advance i9070 was running on JB4.1.2 stock(not rooted)
i tried flashing TWRPkernel using ODIN ..but after i did the phone got stuck up in boot screen and nothing is happening after that.
now i am able to access only the download mode .
what is the solution now?? how to fix back? is this a soft brick??? please help asap.
thanks.
zoomfire said:
hello my galaxy s advance i9070 was running on JB4.1.2 stock(not rooted)
i tried flashing TWRPkernel using ODIN ..but after i did the phone got stuck up in boot screen and nothing is happening after that.
now i am able to access only the download mode .
what is the solution now?? how to fix back? is this a soft brick??? please help asap.
thanks.
Click to expand...
Click to collapse
Download JB firmware for you phone and install it with Odin, like you did that kernel. That kernel is for Gingerbread, that's why you get that problem. It will be fixed. Btw we do not have Odin flashable kernel with TWRP, that's how I know it was for GB. New time download CoCore for JB and unpack it. Use kernel.bin.md5 to install it with Univeral kernel flash app and some root explorer. You need to root it first with Shaaan's method.
shut_down said:
Download JB firmware for you phone and install it with Odin, like you did that kernel. That kernel is for Gingerbread, that's why you get that problem. It will be fixed. Btw we do not have Odin flashable kernel with TWRP, that's how I know it was for GB. New time download CoCore for JB and unpack it. Use kernel.bin.md5 to install it with Univeral kernel flash app and some root explorer. You need to root it first with Shaaan's method.
Click to expand...
Click to collapse
thank you so much.i installed the jb original firmware and its working fine now.and even i rooted it .
now i need to install Jetmod Rom and its kernel.
how to flash the kernel? i tried universal kernel flash app and its not working properly.
zoomfire said:
thank you so much.i installed the jb original firmware and its working fine now.and even i rooted it .
now i need to install Jetmod Rom and its kernel.
how to flash the kernel? i tried universal kernel flash app and its not working properly.
Click to expand...
Click to collapse
Another problem, JetMod is for GB, you can't install it on JB.
Flash stock rom via ODIN simple
CLICK ON THANKS for my reply :laugh:

Categories

Resources