Related
I am just about to throw my phone at the wall.
So I was on stock 2.3.3 and decided I wanted to update to ICS
http://forum.xda-developers.com/showthread.php?t=1488096
I didn't have clockwork mod and wasn't rooted so I eventually got this working
http://forum.xda-developers.com/showthread.php?t=788108
Then I tried to install the ICS rom but it wouldn't work. I then tried to flash http://forum.xda-developers.com/showthread.php?t=1353657 which for some reason didnt have any cell phone coverage.
I tried going back to the just rooted version of 2.3.3 but haven't been able to get the phone to go past the samsung logo / Clockwork Recovery.
Edit: Whenever I try flash the 2.3.3 rooted rom it updates me to Clockwork Mod Recovery v3.0.0.5 with HEAPS of errors.
Any ideas?
You should go back to a stock rom via Odin...you will need a rom that has 3 files (csc , modem, phone) and the Odin 512 .pit file and check the repartition box.
Hawkester said:
I am just about to throw my phone at the wall.
So I was on stock 2.3.3 and decided I wanted to update to ICS
http://forum.xda-developers.com/showthread.php?t=1488096
I didn't have clockwork mod and wasn't rooted so I eventually got this working
http://forum.xda-developers.com/showthread.php?t=788108
Then I tried to install the ICS rom but it wouldn't work. I then tried to flash http://forum.xda-developers.com/showthread.php?t=1353657 which for some reason didnt have any cell phone coverage.
I tried going back to the just rooted version of 2.3.3 but haven't been able to get the phone to go past the samsung logo / Clockwork Recovery.
Edit: Whenever I try flash the 2.3.3 rooted rom it updates me to Clockwork Mod Recovery v3.0.0.5 with HEAPS of errors.
Any ideas?
Click to expand...
Click to collapse
Hi bro
1. Did you download the right cf root? and how did you flash it?
2. what did it say when you installed ics? did you wipe data?
3. how did you flash back to stock?
imgibby123 said:
You should go back to a stock rom via Odin...you will need a rom that has 3 files (csc , modem, phone) and the Odin 512 .pit file and check the repartition box.
Click to expand...
Click to collapse
I've since downloaded the stock file from here http://forum.xda-developers.com/showthread.php?t=846913 and im up and running again. I don't think ill be flashing anytime soon :L
NamNamNom said:
Hi bro
1. Did you download the right cf root? and how did you flash it?
2. what did it say when you installed ics? did you wipe data?
3. how did you flash back to stock?
Click to expand...
Click to collapse
I flashed the cf root the same as the software my phone had under settings. I flashed it using odin.
There was an error message, I can't recall it exactly, it couldn't execute or something. Yup I wiped data.
Flash back to stock using odin
Thanks for the help guys
Did you solve it?
NamNamNom said:
Did you solve it?
Click to expand...
Click to collapse
Half solved, im back on stock gingerbread.
Hawkester said:
Half solved, im back on stock gingerbread.
Click to expand...
Click to collapse
I recomend flashing Codename android 1.5.5, steps:
Download the latest CNA for Galaxy S, and Gapps
Get into CWM
Wipe dalvik/cache/data
flash it
flash Gapps
Done!
My G-note (N7000) got crashed, please help me…………
After flash N7000XXLS2 my G-Note not booting up anymore. It’s stuck on Samsung logo after the boot animation.
Please help me to load N7000XXLS2 or go back to ICS.
Thanks in advance.
musheercmr said:
My G-note (N7000) got crashed, please help me…………
After flash N7000XXLS2 my G-Note not booting up anymore. It’s stuck on Samsung logo after the boot animation.
Please help me to load N7000XXLS2 or go back to ICS.
Thanks in advance.
Click to expand...
Click to collapse
stuck in Samsung logo just mean you need to just fullwipe factory in CMW. but be sure you are on safe kernel such as Speedmode or Hydracore before wiping.. i dont know if xxls2 kernel is brick free or not. but stucking at samsung logo has always been solved by fullwipe factory in my case
mistajoe83 said:
stuck in Samsung logo just mean you need to just fullwipe factory in CMW. but be sure you are on safe kernel such as Speedmode or Hydracore before wiping..
Click to expand...
Click to collapse
I did full wipe but still the same .
and now how can i load safe kernel? or any other advise to fix ?
thank you.
musheercmr said:
My G-note (N7000) got crashed, please help me…………
After flash N7000XXLS2 my G-Note not booting up anymore. It’s stuck on Samsung logo after the boot animation.
Please help me to load N7000XXLS2 or go back to ICS.
Thanks in advance.
Click to expand...
Click to collapse
It takes some time to boot up after you flash a rom..just wait for few minutes and see if it boots up
And how did you flash the rom..i mean what rom,kernel and did you do the wipes
rajsekhar.300 said:
It takes some time to boot up after you flash a rom..just wait for few minutes and see if it boots up
And how did you flash the rom..i mean what rom,kernel and did you do the wipes
Click to expand...
Click to collapse
that is correct. takes times. but if you waited more than 10 minutes try flashing other rom.. safest method is pc odin.
rajsekhar.300 said:
It takes some time to boot up after you flash a rom..just wait for few minutes and see if it boots up
And how did you flash the rom..i mean what rom,kernel and did you do the wipes
Click to expand...
Click to collapse
I was waiting more than a hours and i tried to Flash ICS by odin-3, that one also failed
i was in N7000DDLR9 ROM. then i flash N7000XXLS2 by mobi-odin
musheercmr said:
I did full wipe but still the same .
and now how can i load safe kernel? or any other advise to fix ?
thank you.
Click to expand...
Click to collapse
tell us how you flash it. via PC ODIN or ClockWorkMOD.?
as for the kernel if you have Extrnal sdcard then download SpeedMod 3-15 or Hydracore kernel than put that in your external Sdcard. Open CMW than flash the kernel then go to advance>reboot recovery.. wait for recovery rebooted than you are safe to flash other rom.
---------- Post added at 07:28 AM ---------- Previous post was at 07:20 AM ----------
look here.. theres a tutorial of flashing with PC ODIN + Firmware download..
the instruction is detailed and clear.. this should help you the most.
http://forum.xda-developers.com/showthread.php?t=1424997
musheercmr said:
I was waiting more than a hours and i tried to Flash ICS by odin-3, that one also failed
i was in N7000DDLR9 ROM. then i flash N7000XXLS2 by mobi-odin
Click to expand...
Click to collapse
How could you flash xxls2(jb leak) using pc odin..you need to do it using cwm
And what kernel were u on when you flashed xxls2
rajsekhar.300 said:
How could you flash xxls2(jb leak) using pc odin..you need to do it using cwm
And what kernel were u on when you flashed xxls2
Click to expand...
Click to collapse
finally i got installed ICS 4.0.4 (N7000DDLR6) by PC-Odin. thank you guys.
So from now, can you please advise, how can i flash JB (N7000XXLS2 LEAK). @ present my phone is not rooted. and running on fully stoke ROM N7000DDLR6. advise please...
musheercmr said:
finally i got installed ICS 4.0.4 (N7000DDLR6) by PC-Odin. thank you guys.
So from now, can you please advise, how can i flash JB (N7000XXLS2 LEAK). @ present my phone is not rooted. and running on fully stoke ROM N7000DDLR6. advise please...
Click to expand...
Click to collapse
First flash a safe kernel(like philz,hydracore or speedmod) and then flash the jb rom through cwm
rajsekhar.300 said:
First flash a safe kernel(like philz,hydracore or speedmod) and then flash the jb rom through cwm
Click to expand...
Click to collapse
since you flash through PC ODIN means everything is stocked. Means the brick bug is present. you now only have samsung stock recovery and not ClockWorkMod.
if you are planning to install just Samsung Stock Rom then this step is applicable here
http://techie-buzz.com/android/samsung-galaxy-note-jelly-bean-firmware-leaks.html
or
http://din.huluselangor.net/?p=21813&replytocom=5359&wpmp_switcher=mobile
if you are planning install xxls2 custom then you must first root your phone then install CMW and Flash Desired rom with safe kernel installed
look here for tutorial
http://forum.xda-developers.com/showthread.php?t=1329360
mistajoe83 said:
since you flash through PC ODIN means everything is stocked. Means the brick bug is present. you now only have samsung stock recovery and not ClockWorkMod.
if you are planning to install just Samsung Stock Rom then this step is applicable here
http://techie-buzz.com/android/samsung-galaxy-note-jelly-bean-firmware-leaks.html
or
http://din.huluselangor.net/?p=21813&replytocom=5359&wpmp_switcher=mobile
if you are planning install xxls2 custom then you must first root your phone then install CMW and Flash Desired rom with safe kernel installed
Click to expand...
Click to collapse
i tried the same as from 1st link, flashing by PC-Odin N7000XXLS2 (LEAK). but giving me FAIL! when i click start
i am using Odin 1.87, is that make any issue ?
musheercmr said:
i tried the same as from 1st link, flashing by PC-Odin N7000XXLS2 (LEAK). but giving me FAIL! when i click start
i am using Odin 1.87, is that make any issue ?
Click to expand...
Click to collapse
From where did you download the rom..it it was downloaded from sammobile or from that hotfile link,then you should flash it through pc odin
And if its a custom rom that you downloaded from the xda,then it should be flashed through cwm
the Sam mobile and the hot link are the same. youncan flash the rom using pc odin. but before that put the philz kernel xxls2 in the external sd. so that after the flash using odin, you can boot into recovery and flash that kernel and be safe and do the wipe.
nokiamodeln91 said:
the Sam mobile and the hot link are the same..
Click to expand...
Click to collapse
Yes i know..i said that just to make it clear for the op
Gents, Can you please clarify before I am going to do below. And advise if this is the proper way.
• Flash GB (2.3.6) and wipe
• Then flash ICS (4.0.4)
• Download Notecore (or Speedmod, CF root kernel) kernel and flash by PC-Odin
• Then copy N7000XXLS2 (LEAK) to SD card.
• Boot to CWM recovery, then flash from SD, restart.
Thanks.
musheercmr said:
Gents, Can you please clarify before I am going to do below. And advise if this is the proper way.
• Flash GB (2.3.6) and wipe
• Then flash ICS (4.0.4)
• Download Notecore (or Speedmod, CF root kernel) kernel and flash by PC-Odin
• Then copy N7000XXLS2 (LEAK) to SD card.
• Boot to CWM recovery, then flash from SD, restart.
Thanks.
Click to expand...
Click to collapse
All those steps are correct if you are about to flash a leaked jb rom
If its a leaked custom jb rom,then you need to flash it through cwm
[email protected]$3K#@R said:
All those steps are correct if you are about to flash a leaked jb rom
If its a leaked custom jb rom,then you need to flash it through cwm
Click to expand...
Click to collapse
still am in stuck.
now i have N7000DDLR9 (ICS 4.0.4) without root. then i tried to flash N7000XXLS2 (LEAK) by PC-Odin, i am getting failed.
can you please explain step by step, how do from N7000DDLR9 (without root)
thanks.
musheercmr said:
still am in stuck.
now i have N7000DDLR9 (ICS 4.0.4) without root. then i tried to flash N7000XXLS2 (LEAK) by PC-Odin, i am getting failed.
can you please explain step by step, how do from N7000DDLR9 (without root)
thanks.
Click to expand...
Click to collapse
What was the error you got in the pc odin
paste the odin logs that show failed
Today I got the 4.1.2 ROM from SAMMOBILE at: http://www.sammobile.com/2012/11/28/n7000xxlsa-–-galaxy-note-android-4-1-2-jelly-bean-test-firmware/
As usual I used Odin 3 to flash the files and everything went fine, however I was convinced I would lost the Root, and so did I... I tried installing the Philz's safe Kernel I had for 4.1.1 N7000XXLS2 but after that when rebooting there is no Samsung logo anymore and the phone never boots up.
Any ideas would be highly appreciated!
Lucky for you...
I tried download that firmware, but the file hosting is always stop when i reach about 600 to 800 MB...
Hope there are someone upload that firmware in to another 'friendly' file hosting...
I am so excited about this firmware coz here, in indonesia will takes a very long time to get the firmware update...
I really want to try it to my note...
Sent from my GT-N7000 using xda premium
4.1.2
bee2wolf said:
Lucky for you...
I tried download that firmware, but the file hosting is always stop when i reach about 600 to 800 MB...
Hope there are someone upload that firmware in to another 'friendly' file hosting...
I am so excited about this firmware coz here, in indonesia will takes a very long time to get the firmware update...
I really want to try it to my note...
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
It is very smooth, and it fixed a couple of problems I had! I reverted the backup but I am getting settings app crashing as well as all system apps :silly: I think i'll have to reset everything again! not a surprise... no idea about the root yet though
danter92 said:
Today I got the 4.1.2 ROM from SAMMOBILE at: http://www.sammobile.com/2012/11/28/n7000xxlsa-–-galaxy-note-android-4-1-2-jelly-bean-test-firmware/
As usual I used Odin 3 to flash the files and everything went fine, however I was convinced I would lost the Root, and so did I... I tried installing the Philz's safe Kernel I had for 4.1.1 N7000XXLS2 but after that when rebooting there is no Samsung logo anymore and the phone never boots up.
Any ideas would be highly appreciated!
Click to expand...
Click to collapse
How did you attempt to install Philz kernel?
I installed Philz kernel with Odin 1.85 and after that installed it again through CWM since the Odin install didn't gave me root.
danter92 said:
Today I got the 4.1.2 ROM from SAMMOBILE at: http://www.sammobile.com/2012/11/28/n7000xxlsa-–-galaxy-note-android-4-1-2-jelly-bean-test-firmware/
As usual I used Odin 3 to flash the files and everything went fine, however I was convinced I would lost the Root, and so did I... I tried installing the Philz's safe Kernel I had for 4.1.1 N7000XXLS2 but after that when rebooting there is no Samsung logo anymore and the phone never boots up.
Any ideas would be highly appreciated!
Click to expand...
Click to collapse
Use the xxlsa kernel not the xxls2 one
---------- Post added at 02:24 AM ---------- Previous post was at 02:23 AM ----------
If you can't get into recovery, flash the firmware again using odin and then do the procedure again using zip file xxlsa philz kernel.
Rooting N7000XXLSA (4.1.2)
I installed the ROM over my stock ICS 4.0.4 N7000ODDLR4 usin PC Odin 3.
An advice I can give is, after and before installation, always do a factory reset from recovery mode! Otherwise I myself and lot of others had experienced some bugs due on data from previous OS files.
For rooting, I loaded Clockwork Recovery Mod 6.0.1.2 and used SuperSU from Chainfire to gain root access. No mishap for me, as I didnt get any trouble loading to 'recovery mode'
Now the JB 4.1.2 on my Note N7000 is rooted and open for me!!
Hope this helps somewhat.
P.S. the SuperUser which I used to root 4.0.4 didnt work on this 4.1.2
And I 'didnt' do any kernal change as I have no idea how to do what with kernal, except its use. :laugh:
danter92 said:
Today I got the 4.1.2 ROM from SAMMOBILE at: http://www.sammobile.com/2012/11/28/n7000xxlsa-–-galaxy-note-android-4-1-2-jelly-bean-test-firmware/
As usual I used Odin 3 to flash the files and everything went fine, however I was convinced I would lost the Root, and so did I... I tried installing the Philz's safe Kernel I had for 4.1.1 N7000XXLS2 but after that when rebooting there is no Samsung logo anymore and the phone never boots up.
Any ideas would be highly appreciated!
Click to expand...
Click to collapse
Younflashed a wrong kernel you might have bricked your touchscreen controller like Erika from xda TV you should have flashed an LSA kernel
can you tell me how you rooted your n7000xxlsa
Stallione said:
I installed the ROM over my stock ICS 4.0.4 N7000ODDLR4 usin PC Odin 3.
An advice I can give is, after and before installation, always do a factory reset from recovery mode! Otherwise I myself and lot of others had experienced some bugs due on data from previous OS files.
For rooting, I loaded Clockwork Recovery Mod 6.0.1.2 and used SuperSU from Chainfire to gain root access. No mishap for me, as I didnt get any trouble loading to 'recovery mode'
Now the JB 4.1.2 on my Note N7000 is rooted and open for me!!
Hope this helps somewhat.
P.S. the SuperUser which I used to root 4.0.4 didnt work on this 4.1.2
And I 'didnt' do any kernal change as I have no idea how to do what with kernal, except its use. :laugh:
Click to expand...
Click to collapse
hi, can you please provide me with step by step instruction how to root my samsung galaxy note n7000 on 4.1.2 xxlsa?
thank you so much in advance
download the xxlsa Philz kernel zip version
put it on external SD
boot into recovery
apply update from external storage, and flash the kernel
you will be rooteed
Hi, I have just upgrade my GT-N7000 from rooted ICS to the latest leaked JB XXLSA. I have been looking for the forum but I have no find the answer. How can I root the Rom XXLSA? I suppose that with PC odin, but I'm not sure what kernel should I flash
Thank you
Flash philz 3.71 krenel for xxlsa
Sent from my GT-N7000 using xda app-developers app
VinayakG30 said:
Flash philz 3.71 krenel for xxlsa
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
i install ''PhilZ-cwm6-XXLSA-XJB-3.71.tar'' but no acsess root permission why? Cuz i can acsess cwm and when opening phone i see yellow triangle but ma phone say no acsess root permission. What your suggest?
install a super-su but nothing is change and i can't open super su. it's wanna root permission What can i do?
Install the zip version of the kernel using recovery not the tar version. You have flashed the tar version from PC Odin thats why you have a yellow triangle
Worked fine for me
I've been hunting for this information for ages having managed to brick my Note trying to install PA - thanks for the info - simple and to the point!
..and yep it worked!
nokiamodeln91 said:
Install the zip version of the kernel using recovery not the tar version. You have flashed the tar version from PC Odin thats why you have a yellow triangle
Click to expand...
Click to collapse
Hi, I am running XXLSA also and would like to Root it. Do you know a link with the step-by-step guide to rooting and upgrading XXLSA to the latest ROM version? Thanks!
rykel98 said:
Hi, I am running XXLSA also and would like to Root it. Do you know a link with the step-by-step guide to rooting and upgrading XXLSA to the latest ROM version? Thanks!
Click to expand...
Click to collapse
Step-by-step guide: stop using/upgrading a leak, start using the offical JB releases from scratch.
a) Install a JB stock Rom with PC Odin and root it with Phil's Kernel, or
b) Install a Custom Rom from recovery (after installing Phil's Kernel in stock recovery and rebooting into it again)
ThaiDai said:
Step-by-step guide: stop using/upgrading a leak, start using the offical JB releases from scratch.
a) Install a JB stock Rom with PC Odin and root it with Phil's Kernel, or
b) Install a Custom Rom from recovery (after installing Phil's Kernel in stock recovery and rebooting into it again)
Click to expand...
Click to collapse
Thanks ThaiDai! Where may I find Odin, Phil's Kernel and the Custom ROM? Any links?
rykel98 said:
Thanks ThaiDai! Where may I find Odin, Phil's Kernel and the Custom ROM? Any links?
Click to expand...
Click to collapse
In XDA developers forum you'll find everything because it has a clear structure of subforums and a fantastic search engine.
One more hint: you are already in one of the subforums you'll need - you'll only have to go one step up and use the two round things near your nose.
ThaiDai said:
Step-by-step guide: stop using/upgrading a leak, start using the offical JB releases from scratch.
a) Install a JB stock Rom with PC Odin and root it with Phil's Kernel, or
b) Install a Custom Rom from recovery (after installing Phil's Kernel in stock recovery and rebooting into it again)
Click to expand...
Click to collapse
Can I upgrade from XXLSA to XXLT4 with this method? I.E. can I install PhilZ XXLT4 kernel and then any XXLT4 rom with this method?
SpaffyXE said:
Can I upgrade from XXLSA to XXLT4 with this method? I.E. can I install PhilZ XXLT4 kernel and then any XXLT4 rom with this method?
Click to expand...
Click to collapse
Yes. Download philz kernel (zip file) go to recovery flash the zip file. Go back to recovery do the wipes. Download XXLT4 or XXLT5 and put the phone into download mode and flash XXLT4 or 5 using Odin. Once successfull, flash philz kernel again from recovery, you will have root and custom recovery.
hai guys i am new on Samsung.. I need some help.i have rooted my sony and installed custom ROMS. And as I am new to samsung am little confused. how can i root my S advance and install custom ROM . do I need to unlock the bootloader for installing JB.Currently having a GB version with DDLK2 firmware.. cant find anything about DDLK2 on the forum. please help
http://forum.xda-developers.com/showthread.php?t=2198341
This should help. And please post in the right section
Sent from my GT-I9070 using xda premium
got a problem.. I tried this method http://forum.xda-developers.com/showthread.php?t=1660419 and when i tried to install DDLK2 firmware but failed and i installed rootkernal itself.. after am able to switch on the phone but it is continuously getting restarted.. help please..
Vivek ps said:
got a problem.. I tried this method http://forum.xda-developers.com/showthread.php?t=1660419 and when i tried to install DDLK2 firmware but failed and i installed rootkernal itself.. after am able to switch on the phone but it is continuously getting restarted.. help please..
Click to expand...
Click to collapse
use kies or find your firmware country on sammobile
and please read the rules of xda
ps: or use "update software" in sittings\ about phone\...\
what can i do when phone is contnsly getting restarted??.. when i removed the sim card. then phone is not getting restarted
did u upgrade to jellybean.? use odin software to upgrade .indian firmware is DDULP8 (jellybean) which can b downloaded frm devhost or sammobile.com
ajeshmanu said:
did u upgrade to jellybean.? use odin software to upgrade .indian firmware is DDULP8 (jellybean) which can b downloaded frm devhost or sammobile.com
Click to expand...
Click to collapse
don't i need to unlock the bootloader and root the device before upgrading to jellybean???
Vivek ps said:
got a problem.. I tried this method http://forum.xda-developers.com/showthread.php?t=1660419 and when i tried to install DDLK2 firmware but failed and i installed rootkernal itself.. after am able to switch on the phone but it is continuously getting restarted.. help please..
Click to expand...
Click to collapse
Just flash any GB kernel after that and you'll be fine. Search for cocore 4.1 for GB.
---------- Post added at 06:03 PM ---------- Previous post was at 06:00 PM ----------
Vivek ps said:
don't i need to unlock the bootloader and root the device before upgrading to jellybean???
Click to expand...
Click to collapse
No you don't need to unlock the bootloader as iur device is practically made unlocked. So yeah it is unlocked already. Just flash the official 4.1.2 JB samsung firmware. No root needed.
arffrhn said:
Just flash any GB kernel after that and you'll be fine. Search for cocore 4.1 for GB.
---------- Post added at 06:03 PM ---------- Previous post was at 06:00 PM ----------
No you don't need to unlock the bootloader as iur device is practically made unlocked. So yeah it is unlocked already. Just flash the official 4.1.2 JB samsung firmware. No root needed.
Click to expand...
Click to collapse
bro.. what u mean by already unlocked??? i didn't do anything to make its bootloader unlocked before.. so you are saying that we don't need to do anything to unlock the bootloader??..ok i will flash the official 4.1.2.. but what about the custom JB.. how can i flash the custom ROM?
Vivek ps said:
bro.. what u mean by already unlocked??? i didn't do anything to make its bootloader unlocked before.. so you are saying that we don't need to do anything to unlock the bootloader??..ok i will flash the official 4.1.2.. but what about the custom JB.. how can i flash the custom ROM?
Click to expand...
Click to collapse
We do not have to unlock bootloader.
Install CoCore kernel, you will get custom recovery. And install ROM with it.
1. ROOT.
2. CoCore.
For first install of CoCore do this: Install Universal kernel flash, and some explorer with root permissions like Root explorer or ES file explorer. Download CoCore zip, unpack it and use kernel.bin.md5 file with Universal kernel flash. After that you will get CWM or TWRP (depends what CoCore version you choose). From that part you can change kernel by installing its zip from recovery.
3. Download JB custom ROM, copy to phone - and install it from recovery.
Vivek ps said:
bro.. what u mean by already unlocked??? i didn't do anything to make its bootloader unlocked before.. so you are saying that we don't need to do anything to unlock the bootloader??..ok i will flash the official 4.1.2.. but what about the custom JB.. how can i flash the custom ROM?
Click to expand...
Click to collapse
Yeah just like shut_down says above..we do not have to unlock bootloader. We can just flash the firmware. Sorry for the confusion.
This guide will help you with the whole process of upgrading and installing custom roms.
http://forum.xda-developers.com/showthread.php?t=2198341
shut_down said:
We do not have to unlock bootloader.
Install CoCore kernel, you will get custom recovery. And install ROM with it.
1. ROOT.
2. CoCore.
For first install of CoCore do this: Install Universal kernel flash, and some explorer with root permissions like Root explorer or ES file explorer. Download CoCore zip, unpack it and use kernel.bin.md5 file with Universal kernel flash. After that you will get CWM or TWRP (depends what CoCore version you choose). From that part you can change kernel by installing its zip from recovery.
3. Download JB custom ROM, copy to phone - and install it from recovery.
Click to expand...
Click to collapse
thanks for your awesome rply.. i rooted my device (JB now) and gonna install the cocoreE 6.8 kernel . u said to flash kernel.bin.md5 file with Universal kernel flash.. and after doing this and accessing the custom cwm do i need to install the cocore kernel zip from it again before installing custom ROM?
Vivek ps said:
thanks for your awesome rply.. i rooted my device (JB now) and gonna install the cocoreE 6.8 kernel . u said to flash kernel.bin.md5 file with Universal kernel flash.. and after doing this and accessing the custom cwm do i need to install the cocore kernel zip from it again before installing custom ROM?
Click to expand...
Click to collapse
You do not need to do it again, but you could. Because there are some other files in that zip - and those are not being installed with Universal kernel flash.
shut_down said:
You do not need to do it again, but you could. Because there are some other files in that zip - and those are not being installed with Universal kernel flash.
Click to expand...
Click to collapse
thanks bro.. installed a custom JB on my phone..but i have a small doubt. is it possible to make my device UNROOTED after flashing the stock JB or GB again?? ( actually i dont' need it now.. just asking ) and also will i be able to go back to the stock kernel if i flashed the STock JB?? Because my warranty is not yet over
Vivek ps said:
thanks bro.. installed a custom JB on my phone..but i have a small doubt. is it possible to make my device UNROOTED after flashing the stock JB or GB again?? ( actually i dont' need it now.. just asking ) and also will i be able to go back to the stock kernel if i flashed the STock JB?? Because my warranty is not yet over
Click to expand...
Click to collapse
When you flash stock JB firmware (not ROM) you get all stock, ready to pass warranty.
If you want to go to GB, you need to follow guide how to do that. Because you will get bootloop if you just flash GB from Sammobile.
shut_down said:
When you flash stock JB firmware (not ROM) you get all stock, ready to pass warranty.
If you want to go to GB, you need to follow guide how to do that. Because you will get bootloop if you just flash GB from Sammobile.
Click to expand...
Click to collapse
thank you so much.. but why it is stock JB "Firmware" and not ROM ????
Vivek ps said:
thank you so much.. but why it is stock JB "Firmware" and not ROM ????
Click to expand...
Click to collapse
Firmware is untouched system, for flashing with Odin. And ROM is modded files that can be installed with custom recovery. In short.