[Q] N7000 updated to official ICS Issue. - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Kiel informs new version LPF(TGY)LR1 is availavle, I click update to replace current version LA2(TGY)LA4.
During updating Phone has been rebooted and showing "Downloading, do not trun off target" for long time, after a while Kiel show message that phone cannot connected. does anyone know how to solve this issue? high appreciated, thanks.
PS: result is same after wipe data and catch.

I had the same problem. In the end I flashed with PC Odin and now all is good!

chutneylad said:
I had the same problem. In the end I flashed with PC Odin and now all is good!
Click to expand...
Click to collapse
very glad to hear this good news. Would you please give me a post link(or descriptions) so that I will able to follow it to update my phone?

kevin_fcc said:
Kiel informs new version LPF(TGY)LR1 is availavle, I click update to replace current version LA2(TGY)LA4.
During updating Phone has been rebooted and showing "Downloading, do not trun off target" for long time, after a while Kiel show message that phone cannot connected. does anyone know how to solve this issue? high appreciated, thanks.
PS: result is same after wipe data and catch.
Click to expand...
Click to collapse
Where do you live and what is the new version (version), what is the build date?

gee2012 said:
Where do you live and what is the new version (version), what is the build date?
Click to expand...
Click to collapse
I am in China, new version is ics from kies ,hongkong version i think,not sure the build date.
Sent from my GT-N7000 using XDA

thanks
kevin_fcc said:
Kiel informs new version LPF(TGY)LR1 is availavle, I click update to replace current version LA2(TGY)LA4.
During updating Phone has been rebooted and showing "Downloading, do not trun off target" for long time, after a while Kiel show message that phone cannot connected. does anyone know how to solve this issue? high appreciated, thanks.
PS: result is same after wipe data and catch.
Click to expand...
Click to collapse

updated to ics after change to a xp pc.
Sent from my GT-N7000 using XDA

Related

Singapore - SingTel Users.

hey there. was just wondering if anyone out there has the singtel rom that comes with the set in default. the one with singtel's own startup and shutdown animations.
long story short, I've accidentally reformat my sd cards and in turn lost the backup rom. if anyone out there who has it can so kindly upload it somewhere so I can download it, that'll be awesome! (incase I need to visit singtel for a replacement set)
also, any idea where to get the MobileTV application?
thanks in advance!
or, can I just flash an asian firmware(what build do we use anyway?) and use someone's singtel's update.zip file? quite new to this do yea
thanks! I've googled all this but to no avail sadly.
I'm a Optus user (Au Singtel) and it was not posible to backup our stock roms. But Optus did release a update to DTJG4 just recently so we now have a rom to default back to incase we need repairs, Maybe Singtel will release one for singaore VERY soon
Singtel just released JG4 today.
ah, but any jg roms will boot me to the singtel one with their own bootup screen or...? thanks.
it hsd been mentioned before
1) Make sure you've your data (files, sms, contacts, etc.) properly backed up.
2) Press *#272*HHMM# (HHMM refers to the time on your device in 24hrs format when you entered this code).
3) Select XSP and click on the "Install" button.
4) Your phone will reboot & do a wipe on itself.
5) Enjoy your Galaxy S without SingTel's customizations.
the singtel one is i9000dxjg4?
the firmware seem zippy enough
Adevem said:
the singtel one is i9000dxjg4?
Click to expand...
Click to collapse
Yes, but next time remember to take the time out and record your details before flashing to other firmware..
I9000DXJF4 was the original..
thanks folks for the reply, ye I've backed up before but I've accidentally reformatted my sd cards so ye, thanks for the help folks!
you guys know if there's a way to get the mobile tv app on other roms?
andrewluecke said:
Yes, but next time remember to take the time out and record your details before flashing to other firmware..
I9000DXJF4 was the original..
Click to expand...
Click to collapse
Actually, I should say, that I9000DXJG4 from Samsung firmware doesn't flash for me.. Jams on FactoryFS
i connect the phone to kies and check firmware but no jg4 leh...
Seifer1975 said:
Singtel just released JG4 today.
Click to expand...
Click to collapse
this might be a very stupid question.....
but how to update to this firmware for original condition samsung galaxy-s with I9000DXJF4 ???
there dont seems to be a Menu --> Setting --> System Update menu in the galaxy-s
I can't even connect my device to kies.
sandyph said:
this might be a very stupid question.....
but how to update to this firmware for original condition samsung galaxy-s with I9000DXJF4 ???
there dont seems to be a Menu --> Setting --> System Update menu in the galaxy-s
Click to expand...
Click to collapse
I connected to kies and it told me that a new firmware is available. Just have to click to update.
Seifer1975 said:
I connected to kies and it told me that a new firmware is available. Just have to click to update.
Click to expand...
Click to collapse
hmm ok
but Kies is not detecting my Galaxy-S :-/
using Win 7 64 bit
I'm on windows 7, 32 bit too. can't connect.
thanks folks for the replies, i'm sorry if my replies seemed half-assed but i was replying via mobile. help is very appreciated.
if ur facing the same problem as me when connect to kies like tat >>> (youtube.com/watch?v=R9hdpJPCP-k)
try tis...do a factory restore n format ur internal sd card once ur done connect using kies mode again n it shld work
Sent my SGS in twice using other countries firmware and both times i didnt experience any hiccups, servicing was done perfectly fine.
They even gave me a new battery
sandyph said:
hmm ok
but Kies is not detecting my Galaxy-S :-/
using Win 7 64 bit
Click to expand...
Click to collapse
Using Win7 64-bit... no problem with Kies and update to the latest firmware (I9000DXJG4)...
try restart your PC and Phone and try again...
Make sure you don't have any Task Killer that kill connection when screen off
Edit: Also, make sure: Setting->About Phone->USB Settings->Samsung Kies

Note can't connect to Kies

Kies tried to make a connection to Note but fail. I got error message, can not start service on device, please disconnect then reconnect the device. any help please.
note can connect only to the latest kies version. mine is 2.1.1.11124_17. make sure u have the latest kies version.
even after the latest version, sometimes i had problem connecting to kies.
i first opened the kies application in my pc and then connected the cable to phone. it helped. but occasionally i had the connecting problem.
if you need kies just for a transfer,then try using kies air in your phone.
cheng6991 said:
Kies tried to make a connection to Note but fail. I got error message, can not start service on device, please disconnect then reconnect the device. any help please.
Click to expand...
Click to collapse
Try these steps,
Make sure you are in Stock ROM
Upgrade Kies
Re install USB Drivers in PC
Try with different USB Ports
Try with Different USB Cable
Try this:
With Kies opened and cable connected, shut down the phone, wait until the menu and return buttons close, then restart phone.
I tried 2 computers already.
cheng6991 said:
I tried 2 computers already.
Click to expand...
Click to collapse
Turn Off USB Debugging Mode then try.
Settings > Application > Development >
This should work.
I have tried all the suggestions except that power off the phone then restart it.
cheng6991 said:
I have tried all the suggestions except that power off the phone then restart it.
Click to expand...
Click to collapse
Try with that , if that also dint work , you do factory reset or Odlin Flash to New Update.
Thanks for all the help. I finally got it to work by power down the note then restarted it.
This is latest firmware.
Current firmware version: PDA:KKA/PHONE:KKS/CSC:KK3(XEU)
latest firmware version: PDA:KKA/PHONE:KKS/CSC:KK3(XEU)
Is this right
cheng6991 said:
Thanks for all the help. I finally got it to work by power down the note then restarted it.
This is latest firmware.
Current firmware version: PDA:KKA/PHONE:KKS/CSC:KK3(XEU)
latest firmware version: PDA:KKA/PHONE:KKS/CSC:KK3(XEU)
Is this right
Click to expand...
Click to collapse
Ya may be.. coz different region ll get different version update. in India last update we got KL3
Follow this link see which is the last update for your region
http://forum.xda-developers.com/showthread.php?t=1424997
Mine is a UK note
i think XXLA1 2.3.6 is the final update for your region.. but this update is not available via Kies.
What are you trying to do that requires KIES anyway? If it's for file transfer then just put it into mass storage mind or use KIES air!
ranjan.alva said:
Ya may be.. coz different region ll get different version update. in India last update we got KL3
Follow this link see which is the last update for your region
http://forum.xda-developers.com/showthread.php?t=1424997
Click to expand...
Click to collapse
I have experienced the same problem too. But I found a solution in external site. It works!!
where and how did you fix your problem?
Restart
alex fung said:
where and how did you fix your problem?
Click to expand...
Click to collapse
Hi, in my experiance, I had a same problem in this topic. followed this topic. i restarted my Note 1. after that i can connect with Kies easily.

upgrading phone from KIES problem

Hello when i connected my galaxy s advance to kies it notified me that there is a firmware upgrade, i pressed okay, when it reached to 100% it stopped and an error shows up "failed to run firmware upgrade unknown error occurred" how do i fix that?
P.S I don't want to update from ODIN, last time i hard bricked my phone and i'm really scared that it will happen again.
Thank you!
EranTerran said:
Hello when i connected my galaxy s advance to kies it notified me that there is a firmware upgrade, i pressed okay, when it reached to 100% it stopped and an error shows up "failed to run firmware upgrade unknown error occurred" how do i fix that?
P.S I don't want to update from ODIN, last time i hard bricked my phone and i'm really scared that it will happen again.
Thank you!
Click to expand...
Click to collapse
Did you tried to retry? Maybe your internet connection went down when firmware was downloading...
shut_down said:
Did you tried to retry? Maybe your internet connection went down when firmware was downloading...
Click to expand...
Click to collapse
i tried couple of times, but i still get the same error
EranTerran said:
i tried couple of times, but i still get the same error
Click to expand...
Click to collapse
I never updated phоne with KIES, sorry I can't give you some better advice.
How did you got your phone bricked with Odin before? You used wrong firmware or?
Sent from my GT-I9070 using Tapatalk
shut_down said:
I never updated phine with KIES, sorry I can't give you some better advice.
How did you got your phone bricked with Odin before? You used wrong firmware or?
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
yea, i think i used the P version and i didn't notice. well i will wait a few days and if it will not be fixed i will use odin.
From OTA don't you have any notification?
Powered by CM10.1
EranTerran said:
Hello when i connected my galaxy s advance to kies it notified me that there is a firmware upgrade, i pressed okay, when it reached to 100% it stopped and an error shows up "failed to run firmware upgrade unknown error occurred" how do i fix that?
P.S I don't want to update from ODIN, last time i hard bricked my phone and i'm really scared that it will happen again.
Thank you!
Click to expand...
Click to collapse
Don't afraid from hard brick. Embrace the Odin you'll always need it. Do as this
Extract the firmware file
Open Odin v3.09
Reboot phone in Download Mode
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait 6-7 minutes
Click to expand...
Click to collapse
If you upgraded from Kies the you really dont need to worry. Kies has a option in it called "Emergency Firmware Recovery". Just connect your phone to PC. Start Kies>Tools>Emergency Firmware Recovery.
Your phone will appear in the list below. Just select it and kies will do the rest of the job.
If you are really afraid and you have your warranty then just take it to the nearest Samsung Service Centre and they must repair it for you since the problem was created from Kies itself.
I've try to upgrade my SM-G530F in samsung kies. But it said failed to run firmware upgrade unknown error occurred who can help me
Thankyou

Sony Xperia Z - failed update - dead phone - HELP !

I tried to update my Sony Xperia Z through Pc Companion to android kitkat... All was good until the program poped up a window and said that it couldn't download it anymore because of a network problem ( my internet connection was good, no problems ). And from that point on, when i try to open the phone it says " the software update failed, make sure the phone is connected to the computer and try again " and blacks out... also i think the battery is dead and i cannot charge it because it says only that and turns off...
Please help me... I don't know what to do anymore...
i tried with sony update service, it downloads the update and when it's about to install. says to make sure the battery is fully charged and try again... and i cannot do that... What to do ????
If it matters, it's a C6603 ...
sorry for my english..
M.B.C. said:
I tried to update my Sony Xperia Z through Pc Companion to android kitkat... All was good until the program poped up a window and said that it couldn't download it anymore because of a network problem ( my internet connection was good, no problems ). And from that point on, when i try to open the phone it says " the software update failed, make sure the phone is connected to the computer and try again " and blacks out... also i think the battery is dead and i cannot charge it because it says only that and turns off...
Please help me... I don't know what to do anymore...
i tried with sony update service, it downloads the update and when it's about to install. says to make sure the battery is fully charged and try again... and i cannot do that... What to do ????
If it matters, it's a C6603 ...
sorry for my english..
Click to expand...
Click to collapse
Press power and vol up for several seconds and put it an the wallcharger. Let it charge for several hours and try to update again
St.Jimmy90 said:
Press power and vol up for several seconds and put it an the wallcharger. Let it charge for several hours and try to update again
Click to expand...
Click to collapse
It doesn't work!
When i plug it in the wall charger is doing a restart loop, with the sony logo, then the message a wrote earlier " the software update failed, make sure the phone is connected to the computer and try again " and a red led light, and it's the same thing over and over again...
That's my concern...if i damaged the phone...i mean, if i can't recharge it, i can't do nothing...
There must be some way to fix this..please help...
Download Sony Update Service (SUS) and then update from there it will fix it
Sent from my C6603 using Tapatalk
Mr.KiLLeR said:
Download Sony Update Service (SUS) and then update from there it will fix it
Sent from my C6603 using Tapatalk
Click to expand...
Click to collapse
I had the same problem as OP and resolved it using SEUS - can confirm that it works.
Download SUS (formerly SEUS) from here: http://www.sonymobile.com/global-en/tools/update-service/
avindal said:
I had the same problem as OP and resolved it using SEUS - can confirm that it works.
I did said that i tried olso the update service from sony, and when it finishes the download and begins to install the update, after 15 to 20 seconds or so, pops up a message and says to make sure the battery is fully charged and try again.
Click to expand...
Click to collapse
M.B.C. said:
avindal said:
I had the same problem as OP and resolved it using SEUS - can confirm that it works.
I did said that i tried olso the update service from sony, and when it finishes the download and begins to install the update, after 15 to 20 seconds or so, pops up a message and says to make sure the battery is fully charged and try again.
Click to expand...
Click to collapse
Okay, might be able to help you.
You can manually flash a ftf file to make your phone work
Click to expand...
Click to collapse
M.B.C. said:
I did said that i tried olso the update service from sony, and when it finishes the download and begins to install the update, after 15 to 20 seconds or so, pops up a message and says to make sure the battery is fully charged and try again.
Click to expand...
Click to collapse
Oh I didnt read that .. then the only thing you can try is using Flashtool and flash the firmware manually.. it should work..
Mr.KiLLeR said:
Oh I didnt read that .. then the only thing you can try is using Flashtool and flash the firmware manually.. it should work..
Click to expand...
Click to collapse
Firstly i want to note that my battery is certainly dead, and i can't charged it beacause of the restart/boot loop that i mentioned in my early posts...if yes, can you guys provide me with necesary tools, firmaware and stuff, because after all the attempts i tried, i'm afraid to do something else to the phone. I mean i was stupid in the first place to not ask how to do it properly, and i don't want to lose the phone...
And sorry if my English is rough
M.B.C. said:
Can you guys provide me with necesary tools, firmaware and stuff, because after all the attempts i tried, i'm afraid to do something else to the phone. I mean i was stupid in the first place to not ask how to do it properly, and i don't want to lose the phone...
And sorry if my English is rough
Click to expand...
Click to collapse
You can download Flashtool from FlashTool Latest Version
Download the Firmware from Firmware Downloads according to your device model ..
My battery is surely dead..check my last edited post.. Can i still intall the firmware in this case ?
M.B.C. said:
My battery is surely dead..check my last edited post.. Can i still intall the firmware in this case ?
Click to expand...
Click to collapse
You can give it a try , just follow the instructions and then flash
Mr.KiLLeR said:
You can give it a try , just follow the instructions and then flash
Click to expand...
Click to collapse
It didn't work... the green bar loaded a few seconds, then it camed to a complete stop. I left it about an hour, and nothing changed...
M.B.C. said:
It didn't work... the green bar loaded a few seconds, then it camed to a complete stop. I left it about an hour, and nothing changed...
Click to expand...
Click to collapse
Did you put phone in fastboot mode?
M.B.C. said:
It didn't work... the green bar loaded a few seconds, then it camed to a complete stop. I left it about an hour, and nothing changed...
Click to expand...
Click to collapse
Tell me the procedure you did ...
Mr.KiLLeR said:
Tell me the procedure you did ...
Click to expand...
Click to collapse
In the end i went today to a service, and solved the problem! I couldn't stand it anymore.. Don't ask me how the guy did, he just did...
Anyway, thank you guys for the support, i apreciate it !!! :good:
M.B.C. said:
In the end i went today to a service, and solved the problem! I couldn't stand it anymore.. Don't ask me how the guy did, he just did...
Anyway, thank you guys for the support, i apreciate it !!! :good:
Click to expand...
Click to collapse
Lol that is not a problem.. Be careful next time...
Sent from my C6603 using Tapatalk
Siny Update Service
Mr.KiLLeR said:
Download Sony Update Service (SUS) and then update from there it will fix it
Sent from my C6603 using Tapatalk
Click to expand...
Click to collapse
My phone was dead and the resurrection came easily with SUS dowloaded with Chip.
Thanks for the advice!
:laugh:
Bricked!! -.-
Hey guys, I don't know if this is out of topic but since this is for xperia z bricked, I'll show my problem.
So, I updated my xperia z for 3 times since I bought it, It came with Android 4.2.2 and the updates were all OTA.
Then, sudently It started to reboot itself and entering in bootloop.. Then, I tried to use flashtool but always gave me error about S1 flash, and then "Error: Flash Aborted"
So I tried to unlock my bootloader several times (Yes, several times, because it was always saying ok, but then it was showing "ROOTABLE") then, when I Finally got it unlocked, I couldn't flash anything because it was gaving me error saying that couldn't write boot.. Then, Tried Pc companion but again, failed, and my phone was stuck in "Update failed (...)"
Then finally, I flashed advanced kernel by DoomLord and entered in CWM, but when I tried to wipe factory reset, It was saying that couldn't mount data.. Then, I have formated the Data and Media (SD Card) And then, I was able to do factory reset, but, then, I went to advance and did reboot recovery.. My phone turned off, but never came on... I arrived at home and connect ti to wall charger, but no sign of life, nothing, not even red led or anytihng.. NOTHING!! Don't know what happened.. I really need help on this man, please :c
how u resolve ur problem for xperia z buddy....I have same problem just like u faced
M.B.C. said:
In the end i went today to a service, and solved the problem! I couldn't stand it anymore.. Don't ask me how the guy did, he just did...
Anyway, thank you guys for the support, i apreciate it !!! :good:
Click to expand...
Click to collapse
how u resolve ur problem for xperia z buddy....I have same problem just like u faced, no battery charging and cant update phone, always showing software update failed make sure that your phone is connected with computer

Please help: Phone freezes and reboots

I have a problem, hope someone can help me.
First time i haven't rooted my phone lol. Since update my phone randomly freezes and reboots, sometimes it just turns off, which means it doesn't shut down but screen turns black and its off. I wonder if someone else has the same problem and could solve it or if someone knows how i could track this error to get rid of it. Some sort of logging program i could use for example but as i said phone is not rooted. Appreciate any help. Thanks
try clearing the cache or if that doesn't help manually download the firmware (on a stable wifi connection) and flash it again.
when did you get the phone?
share the phone's model number and the software version running please
3mel said:
try clearing the cache or if that doesn't help manually download the firmware (on a stable wifi connection) and flash it again.
Click to expand...
Click to collapse
Factory reset?
TheNewGuy92 said:
when did you get the phone?
share the phone's model number and the software version running please
Click to expand...
Click to collapse
Sm-g780g/ds
TheNewGuy92 said:
when did you get the phone?
share the phone's model number and the software version running please
Click to expand...
Click to collapse
I got it October last year
Well i guess i will try a factory reset. I also transferred using Smart switch. Probably it solves the problem
irgendeinname said:
Factory reset?
Click to expand...
Click to collapse
well a factory reset will clear your cache for you but if that not where the issue lays you'll still be in the same predicament.
flash your firmware again if you need to. don't interrupt or pause the download and do over a strong wifi network.

Categories

Resources