[Q] phone got wet? - HTC Vivid, Raider, Velocity

well my phone got wet on the back with a case, then i took off the case it and the back which was all wet, the battery was wet to and so was under it, i took out the battery and dried every thing and it worked, everything did, the speakers and buttons. so later today the phone just shut off and wouldnt turn on. so i thought it died and i tried charging and just the light would flicker on the top left of the phone. so i put it in rice for about 5 hours and i put battery back on and now when i press the the power button. the screen just turns on like u can see light, just a black screen. then it goes away.
the battery has some green stuff on one of the gold things that conencts your batteries.
So i oredered another battery off of ebay, do you think that would fix it?
Thank you so much for reading this, just post your opinion on what happend.

It might did you try to clean off the green stuff sound like corrosion when water sits on copper.Hopefully a new battery works out for you.
Sent from my HTC Holiday using xda premium

Related

[Q] Drunk G1 turns itself off

Hi fellas, long time no see!
So, first of all, yes, I've used the search, but what I've found is threads about wet phones, mine I believe is already dry.
Situation: I'm in the club, glass of absolut and redbull in my hand, phone in my jeans pocket, extra glass of absolut w/redbull on the bar next to me. Fat drunk aproaches the bar and tips my glass with his elbow, all my drink spilled over my clothes. After a brief discussion I realized the guy was too drunk and was a worthless douche so I let it go. I reach for my phone and realize my pocket is soaked wet, when I take it out, phone is out, red light dim. So I turn it off, take it apart and forget about it til the next day. Next day, it began to turn on, but shut itslef off after a few secs, so I take it apart again (that is back cover, battery, SIM and sd, I dont have the screwdrivers to go further), cleaned what I could with alcohol, let it vent in front of a fan for a few hours, then in a bowl of rice for 2 days, no good.
So I got an extra phone and let it sit for more than a month. The other day I decided to give it another try and voila! it worked, had to be dry by now! used it for a day, left it charging, when I came back, it was off again, unresponsive. I have an extra battery, so I got one of those universal battery chargers, because I though the problem could be the phone not charging the battery. It was (even when the light turns on red and it says charging and all). So, first weird thing, light turns on red, screen says charging, but USB wont wont actually charge the battery if it is somewhere below.. 70% maybe, it does charge if it is lets say about 80% or above.
I used it like this for a week or so, and now, when I turn it on, after the bootscreen and the initial loop, the phone now powers itself off (with the text "turning off" -or whatever it says- and vibrating and all), even with the battery full. Tried with both batteries full, plugged in the usb (the light is green when full, and will even charge), erased battery stats (recovery works fine) but the damn thing wont load android properly!
Any ideas what might be causing this? it should be dry by now (its been like 2 months already and I let it vent and used the rice method), it doesnt smell funny (you know, like burnt, like when sth short circuits).
btw, also tried flashing the ROM again (i always have a couple in the sd just in case) and didn't work neither, does exactly the same.
i know it is a bit long to read but i wanted to give you the most insight i could. i know that it works! it did a couple days ago, but something got screwed with the startup and i dont know what it is!
i see that u tried flashing the ROM again, but just to be sure u did do a super wipe correct?
this is very strange though, and yeah it should be dried by now.
Thanks for the reply, and yes, I did! I'm sure that is not the problem :/

Hd7 randomly wont wake up

I have an hd7 tmous, and this problem has persisted on the original rom, and the official nodo, both locked and unlocked. Phone will work fine, run it all day, then while I'm at work, phone in my back pocket, it won't wake up with any button, and I have to pull the battery. Only when its in my back pocket. Sometimes takes 5 minutes, sometimes a few hours. Front pocket takes more time. Any ideas? I thought about trying another radio. I have search xda and the net and can't find a solution. Got it used and have no warranty. Any help is greatly appreciated. Thanks.
Also, on my days off, and the phone never goes in my pocket, no freezing. How odd. Sometimes its really warm, almost hot.....
I've had a similar problem but only when its been on charge a few hours. the lil green battery light stays lit but the phone wont respond unless I do a battery pull
Hmmm. Now that you mention it, every time it has done it, it was about 80+ % charged. Never done it on half charge. The green led that you mentioned doesn't behave as you said, but you gave me an idea- battery maybe? Gets hot, only does it when mostly charged, it makes sense.
I recreated the problem. Putting a fair amount of pressure on the bottom of the phone, just below the battery cover causes the screen to dim, keeps dimming, then the phone is off. Seems like a short. Gonna take it apart when I get home. Fun times, lmao.
SOLVED
I was right, it was a short. After a little process of elimination, I narrowed it down to the protector shield/heat sink that the SIM card/sd card cluster rest on. I pushed on the SIM card bracket, and it dies. I unplugged the cluster, left it on, same result. Removed the cluster and the shield it is stuck to (by adhesive), and it didn't die. Increased the pressure until my screen made funny colors, still didn't die. There is a heat sink pad and some amber "tape" that are on the underside of the shield, centralized around the CPU. The area I pressed on was on the opposite side of the cluster though. And, oddly, there was no protective amber "tape" on that area. I cut a piece of clear packing tape, made it just the right size to cover the area, and not overlap the amber side. I put the shield back together and the problem is gone. Turns out that when my phone was in my back pocket and I bent down for something, it would put pressure on the bottom of my phone and short it out. Considering the area of the short, I feel very lucky that my phone is still kicking. I am posting this to help anyone who might have a similar problem. I hope this helps. Easy to take apart, unlike the hd2
Thanks, xda, for without you and your awesome gathering of people, i would be lost...... And bored.

[Q] Replace Cracked Screen but battery has "?"

Need advice Bad/fast. I'm on call at work and dropped phone about one storey and glass broke. I have a spare for for rooting with not sound.
replace screen using the thread here and a you tube video. All went smooth and booted with no screen issues. The issue is the battery bar shows a red "?" and won't charge. I had on charger all day in my work truck and was very slowly losing power. Then went to Bar for some Budweiser and went from around 65% to 0% in about 1 hr and not using /screen off.
check the battery connection make sure the screws are tight and the ribbon looks good.
Thanks for reply final sat down with good light and checked and looked good and tight.
just removed all screws and reset them all T5 blacks and jsut plugged into wall charger and about 3 minutes later it kicked on.
Oh and now getting a charge light.
Weird I'm a Service(Gas) station POS Tech "Point Of Sale" and as a rule. Start with the easy, obvious things first.

water damaged phone

hey guys so my phone was dropped into a water pool "xperia z1"
tho it's supposed to be waterproof but some how water managed to get inside the phone ._.
anyways i've been putting it in rice for almost 2 days trying to turn it on from time to time but it wasn't turning on ._.
i tried putting it on charger tonight and the red charging light appeared but nothing appeared on the screen
i was afraid that something will go wrong if i tried to turn it on so i unplugged it fast and put it bk to rice
what do you think i should do?
thanks in advance
I experianced the same, but in the end had to get my screen nd power cord replaced as abnormal functionality of power cord was cycling my phone on off
Leave it in the rice for another day or two. Rice can bring dead phones back, trust me :3
My advice, send it to Sony for official repair.
They will fix it!
open the back and dry it completely even with a hair dryer on warm setting not hot and test it - if working ok then buy the rear seal gasket (ebay) and put the back back on, keep it away from water, I have open a few of these for screen repairs and taking the back off is easy

top part of phone get hot after screen replacement

Hello
My screen cracked so I ordered a new on ebay. However after I have put the phone back in its shell the top part gets pretty hot. I opened it and started it without the aluminum shell to test and there were no heat? Anyone know what it might be?
Thanks In advance!
That isn't likely to be the screen. My phone gets warm too. About 4 days ago out of nowhere I noticed the upper part of the screen feeling warm, it turns out my phone had stopped sleeping properly and Google services had resumed chomping on my battery when the screen was off.
Tho when i don't keep it in the aluminium case it's not warm at all, turned on and I have logged on my simcard/wifi. I have left it on outside of the case for 1 hour and it don't get warm at all. However in the case it gets super hot as soon as it boots and then after 15-25m it turns off probably because it's too hot
Happened the same last night with me.
Put a download and slept, and in the morning it was all drained of battery and it showed that it shut down after minutes after I slept with 90%battery.
It was weird. Had to keep pressing power button for 40 sec approx for the phone to turn on.
It's working fine now though
did anyone of you even read my post? I said after a screenreplacement. It didn't just happened randomly. however i fixed it. I removed the camera and the earspeaker and reinstalled them used some alcohol on the contact points on the case and the earspeaker and it seemed to fix it if anyone has this problem later down the road
Hi jullleee, I have the same problem as u after I replaced the screen. The phone getting too hot on the top (one plus 3). On charge it becomes more hot and faster on very high temperature than without charging. Also the battery dont charge . Why did u reconnect the ear speaker and the camera ? Thank you in advance
DestinyisGone said:
Hi jullleee, I have the same problem as u after I replaced the screen. The phone getting too hot on the top (one plus 3). On charge it becomes more hot and faster on very high temperature than without charging. Also the battery dont charge . Why did u reconnect the ear speaker and the camera ? Thank you in advance
Click to expand...
Click to collapse
For anyone coming across this thread I just had the same problem when replacing my Oneplus 3 screen. It seemed to work, and I plugged it in, but it said "battery too low charge for a while", then I got the 0% and seemed to charge and then restart, and then be back at 0% and be stuck in this boot / charging loop. My battery had died hard when my screen died so I thought maybe it just needed to charge for a while, but the top half of the phone got very hot.
So I took it apart again and it turns out the issue for me was with the top ribbon cables that cross the battery. Where they connect to the main board was very tight and it was difficult to get both of them in place properly. Usually they kind of overlapped and one stuck up slightly. It was fixing their placement before bolting down their cover that fixed this issue for me.
Edit: Never mind. Still searching for my issue. Taking the back case off will let it work normally but whenever i snap it on it goes back into this charging loop, I still suspect it's an issue with these two cables and the case is putting pressure in the wrong spot or something but I'm not really sure yet.
I had the same problem, the issue was the fact that i plugged the ribbon cable the other way around.

Categories

Resources