Related
okay im getting completely frantic right now, i tried to flash the newest cognition ROM from stock 2.1 rooted from recover and it all loaded fine but i kept getting force closes com.android.phone or something and then i was like okay ill just restore my last backup and did that but now it wont boot past the at&t world phone screen and i cant get into recovery. ive read other threads about this but theyre all different situations so i wanted help for my specific situation. i love all the devs help and hard work on this site and i hope my phone is not bricked because ive only had it for about 2 weeks. so please a fast response would be appreciated, i would like to have my phone fixed by tonight thanks in advance guys oh and also i am able to get into download mode i just dont know what that does.
no one knows?
nevermind everyone i got it using odin
Just reflash use this http://forum.xda-developers.com/showthread.php?t=818439 or you can search for odin one click by DG.
Odin. You will be fine. Just search and read. Be careful what you do and try your best to understand what you are doing before you panic.
You were getting fc on cog so instead of reading and re -flashing you panicked then flashed a 2. 1 back up over 2. 2 with voodoo lagfix active. :O it is not the end of the world. I do hope you have a PC and not a MAC. Odin will flash you back to stock but you will need to search and read. Good luck
Captivate
Cog 2.2
I think I'm in a similar boat... tried to flash back to JH7 after getting tired of froyo versions that I didn't like. Now I'm stuck at the AT&T screen and nothing works... no matter what button I hold while I power the phone on, I get nothing. Any advice?
Update: I think I may have something here... found a guide talking about JTAG stuff that suggested holding both volume buttons while plugging in the USB cable... seems to have gotten me to the "downloading..." screen. That's a plus.
Hai guys I need help badly , here's the story, I bought my Samsung Galaxy S few weeks ago and I love it, few days ago I connected my Galaxy S and opened the Samsung Kies and it said there's update available for the firmware, so i went on and click it, then the whole upgrading firmware started. Then i checked the firmware, it is android version 2.2 aka Froyo. I was happy at first , but then i realise my phone lag badly! i cant pull down notification drawer, the drawer will stuck and in order to use my phone, i have to click the back button, so that the stucked drawer will close, and i cant type properly, lag lag and lagggs! WHAT ACTUALLY HAPPENED GUYS? CAN ANYONE ANSWER ME PLEASE? IS THERE ANY WAY TO FIX THESE LAGS? should'nt Froyo be faster and better? please please i need help... should I use Anvanced task killer or anything?
p/s: im from Malaysia anyway, anybody from Malaysia had the same problem? please anyone help me please
maybe boot into recovery and clear cache/dalvich cache and factory reset.
Just instal a lag fix like voodoo 5
Connect and Share
http://twitter.com/gadgetcheck
Sent from my GT-I9000 using XDA App
First thing you should do is a complete factory/data reset. The upgrade process isn't very good
@tragusman: erm how to boot into recovery, sorry im clueless ...
nwsk said:
First thing you should do is a complete factory/data reset. The upgrade process isn't very good
Click to expand...
Click to collapse
Hai, so if i reset the phone it'll go back to Eclair? and then connect again to Kies and update to Froyo again?
@ gadget check: Hai erm is that available in the market? the voodoo 5?
Just search for it on XDA and u will get all the steps to speed up ur SGS
Connect and Share
http://twitter.com/gadgetcheck
Sent from my GT-I9000 using XDA App
I think the things he is experiancing is more than lag its as above mentioned upgrading can leave things slow and reseting clearing cache etc is recomended.
Turn phone off then hold down power volume up and the middle button till it goes into recovery also you could use quick boot from the market its free and it will boot into recovery if the 3 button mode doesnt work.
No it wont put you back to 2.1 but may wipe contacts apps etc but the plus is a clean start.
@Gadget Check: alright thanks I shall search it up ...
@Tragusman: ok ok, thanks alot ! shall search up quick boot from android mart ...
So apparently the official 2.2 Froyo is rolling out. I haven't checked yet but I will when I get home. I have some newb questions.
I got my phone and haven't touched a thing to it. Just added lots of apps. No root. No lag fix. Nothing.
My question is, if I upgrade this officially via Kies:
1) Do I lose my contacts / stuff ?
2) Do I lose my apps ?
I heard people saying that once you upgrade to do a hard reset of the phone -- why ? What happens if you don't ?
With this in mind, how and what is the best way to back up all my apps ? I haven't rooted but i DO have Titanium Back up. Would Z4root work for i9000m ? can anyone confirm ?
Funkadelick said:
So apparently the official 2.2 Froyo is rolling out. I haven't checked yet but I will when I get home. I have some newb questions.
I got my phone and haven't touched a thing to it. Just added lots of apps. No root. No lag fix. Nothing.
My question is, if I upgrade this officially via Kies:
1) Do I lose my contacts / stuff ?
2) Do I lose my apps ?
I heard people saying that once you upgrade to do a hard reset of the phone -- why ? What happens if you don't ?
With this in mind, how and what is the best way to back up all my apps ? I haven't rooted but i DO have Titanium Back up. Would Z4root work for i9000m ? can anyone confirm ?
Click to expand...
Click to collapse
1) no
2) no
3) hard resets are only if you experience a ton of lag while operating the phone
4) z4 does not work on jk4
BlackDino said:
1) no
2) no
3) hard resets are only if you experience a ton of lag while operating the phone
4) z4 does not work on jk4
Click to expand...
Click to collapse
how do you root jk4 then ? 2.1 eclair on bell i9000m
1. Phone is currently rooted. Do I have to unroot it before applying the firmware upgrade from Kies?
2. Do I have to perform a factory reset before applying the firmware upgrade?
Why is this stupid update corrupting internal SD's left and right? Bell better get me a new phone! Cause this one is bricked(I think) it goes up til "S" logo and then nothing but blank screen. If I touch the button, they light up but still nothin on the screen.
I should have gotten a different phone to begin with, but too bad Canada doesn't have all the good phones US has like D2 DX HTC Evo etc. Going up to Bell tomorrow for an exchange.
rajesh26e4u said:
Why is this stupid update corrupting internal SD's left and right? Bell better get me a new phone! Cause this one is bricked(I think) it goes up til "S" logo and then nothing but blank screen. If I touch the button, they light up but still nothin on the screen.
I should have gotten a different phone to begin with, but too bad Canada doesn't have all the good phones US has like D2 DX HTC Evo etc. Going up to Bell tomorrow for an exchange.
Click to expand...
Click to collapse
A lot of people have been complaining that their SD cards have been screwed. Luckily mine went through without any problems and hasn't given me any trouble so far.
Froyo is insane tho, before the phone used to lag a bit, now the moment i touch it it opens. No need for lag fix in my opinion, everything works blazing fast as is.
One thing to watch out for is the WIFI. It was working normally at the beginning but after 3 hours it just disconnected for no apparent reason and has trouble connecting back.
Good luck
rajesh26e4u said:
Why is this stupid update corrupting internal SD's left and right? Bell better get me a new phone! Cause this one is bricked(I think) it goes up til "S" logo and then nothing but blank screen. If I touch the button, they light up but still nothin on the screen.
I should have gotten a different phone to begin with, but too bad Canada doesn't have all the good phones US has like D2 DX HTC Evo etc. Going up to Bell tomorrow for an exchange.
Click to expand...
Click to collapse
Don't panic yet...
Try this
Volume UP/Power/Home(middle button)
Factory reset/Wipe
urfase said:
1. Phone is currently rooted. Do I have to unroot it before applying the firmware upgrade from Kies?
2. Do I have to perform a factory reset before applying the firmware upgrade?
Click to expand...
Click to collapse
1. NO
2. Good idea to factory reset before and after. Can't hurt and any noncompatible
programs and data will be gone.
Videonut said:
1. NO
2. Good idea to factory reset before and after. Can't hurt and any noncompatible
programs and data will be gone.
Click to expand...
Click to collapse
1) but will it erase root upon upgrading?
bimmerboii said:
1) but will it erase root upon upgrading?
Click to expand...
Click to collapse
Yep, but for optimised result, this is a must do!
You can probably have it work without doing a factory reset, but you can encounter weird behavior, bugs and stuff!
Anyway, you might end up doing it anyway to solve the firts boot issue
I'm one of the users who upgraded to Bell Froyo (from stock FW with root and lagfix - undid the lagfix before upgrading) and then encountered the broken internal SD card issue. I ran Volume UP/Power/Home(middle button) to reformat everything and it is up again. Inside the OS, I ran the internal factory reset again. So far so good. *crossing fingers*
I updated mine last night. However I've had major problems since. Initially it would just freeze up randomly and require removing the battery to get it back up and running.
Today I decide to reset it to defaults which seemed to go fine, although shortly after getting it all setup again, some Samsung app of sorts came up with an error and had to be forcefully closed. Then I was left with a black screen and only the notification bar.
Powered off the phone and went to turn it back on, and now it just loops through the Samsung GT i9000 screen (white writing). Not even the colourful S logo comes up.
I'm able to get it into Download Mode but not Recovery Mode. I'll have to do some reading about this Odin stuff tonight. Hopefully I can revive it, otherwise I guess I'll had to send it in for repairs. No idea if Virgin Mobile repairs will go through Bell or if I take it to them directly.
This is my first Android phone and I've only had it for just over a week. I thought I was making a good decision, but now I see it has quite a defect with the internal SD card failing.
Slow after upgrade
I upgrade my phone last night ( as per bell and Samsung) It is now slower than before. Quadrant Standard has it under 900.
Any ideas how to fix it?
bimmerboii said:
1) but will it erase root upon upgrading?
Click to expand...
Click to collapse
Just use SuperOneClick after you upgrade to Froyo, I've tested and have root on JK4
http://forum.xda-developers.com/showthread.php?t=803682
I have an unlocked phone from Bell that I already upgraded to the international (or European?) JPP/JPO 2.2, what is the best way to downgrade or restore back to default firmware before using Kies to get the official update? Does factory reset restore stock firmware?
I upgraded to official Bell froyo last night ..thn rooted.But how can i Unlock now? i tried using SGS unlock app it says no unlock codes found?? Please help
God damn samsung and bell!
it seems like they're giving defected phones to their costumers!
I have the corrupted sd card too, took it to guarantee now it takes more than 1 month to fix this!
this is f-ing xmas for god's sake. i want my phone
Same problem here!
I do have 2 good samsung galaxy s vibrants from Bell, however when i got the second one i upgraded to Froyo and now i cant unlock it because i cant read the stupid file inside the phone so,
How can i go back to my previous JH2 baseband?
Or
How can i unlock JK4?
I did my unlock on the other Galaxy using the script you donwload from somewhere in this website and then connecting the phone via usb cable with debugging on and mounting sd but with froyo i dont even know where my USB settings went!!!
Thanks for your help, greatly appreciated.
ciudadbonita said:
I do have 2 good samsung galaxy s vibrants from Bell, however when i got the second one i upgraded to Froyo and now i cant unlock it because i cant read the stupid file inside the phone so,
How can i go back to my previous JH2 baseband?
Or
How can i unlock JK4?
I did my unlock on the other Galaxy using the script you donwload from somewhere in this website and then connecting the phone via usb cable with debugging on and mounting sd but with froyo i dont even know where my USB settings went!!!
Thanks for your help, greatly appreciated.
Click to expand...
Click to collapse
Have you found any solution yet?? I am thinkin to flash back orignal samsung firmware using Odin n then unlock..atleast i will be able to use the phone then
Videonut said:
Don't panic yet...
Try this
Volume UP/Power/Home(middle button)
Factory reset/Wipe
Click to expand...
Click to collapse
what if after this, it's still stuck after the s logo boot up?
does this mean i have a broken internal sd?
Hi,
Last night my Galaxy S was low on battery, and I kept trying to turn it on for it to die right away (it was working as expected I guess)
This morning after I charged my phone it wouldn't turn on at all! It loads to the logo screen, makes that jingle sound and then holds and doesn't turn on.
I can get to recovery and download mode.
I put OCLF on like 2 months ago, but haven't modded/flashed ANYTHING since. It is very bizarre how it just died.
I'm wondering what my options are now. Obviously I would rather not loose all my personal files. Since I can get into download mode, can I just flash a new firmware? I'd like FroYo anyway, but I haven't got a clue what to do.
Great start to the year – !
Cheers,
Mitch
EDIT: I just decided to try the "Clear User Cache" option and then reboot to no avail. Now I can't get back into recovery mode!?!? Download mode still works. Huhh?? Is this expected? Have I lose Recovery Mode entirely now? Crap.
seeeems like an odin flash via the download mode is the only way. There are a few tutorials on this site and even tut vids on youtube so you should be fine if you just follow everything they do (as long as it works for them of course)
How do I know what version to flash? I have read a few tutorials and they all have started with "Dial x and check you have y" etc. Obviously I can't do any of that.
What is the *safest* firmware I can flash?
My phone currently has some optus variety.
Please forgive the noodish question.
Mitch
Where are you located? And who is your provider?
Hi,
I'm in Sydney Australia and my provider is Optus.
Thanks
Hi,
I still can't get my phone working and am not clear how to proceed.
What would be the best firmware to flash to my Optus Galaxy S that bricked out of the blue? Should I just send it back to Samsung?
Thank You
m1tch37 said:
Hi,
I still can't get my phone working and am not clear how to proceed.
What would be the best firmware to flash to my Optus Galaxy S that bricked out of the blue? Should I just send it back to Samsung?
Thank You
Click to expand...
Click to collapse
Hey mate go to samfirmware and get I9000DTJG4 thats the stock optus rom once you get phone up and running then upgrade to 2.2.1.
Sounds like you'll need to do a flash of a stock rom..
By the way, the old oclf had some issues that might lead to system corruption (unfortunately I'm not very sure exactly what it does, or whether it could lead to this problem). I'd suggest getting one of the newer lag fixes available here when you do get your phone running again
tragusman said:
Hey mate go to samfirmware and get I9000DTJG4 thats the stock optus rom once you get phone up and running then upgrade to 2.2.1.
Click to expand...
Click to collapse
tragusman has got it right. Depending on what the issue is, you'll either recover nicely or your phone is toast. Flash the above stock firmware and give it a shot. Note that you'll likely loose your data and settings.
If you're new to flashing firmwares, check the great reference guide on where to find Odin and how to use it (this is the app you'll use to flash the above firmware).
http://forum.xda-developers.com/showthread.php?t=723596
After flashing, try getting into recovery mode. If you can look for an error message under the standard menu. Can't get to d/l mode? You're probably in trouble. Get into recovery and see an error msg? Post the error here or google it for a solution. No error msg? You're probably ok - restart the phone.
Good luck.
Thanks guys.
I'm about to try it now, but before I start potentially breaking my phone even more, I was just thinking: Could I just send it back to Samsung? Would they fix it, or identify right away I have changed something and void my warranty.
Mitch
m1tch37 said:
Thanks guys.
I'm about to try it now, but before I start potentially breaking my phone even more, I was just thinking: Could I just send it back to Samsung? Would they fix it, or identify right away I have changed something and void my warranty.
Mitch
Click to expand...
Click to collapse
If it's broke, you can't break it any more I've sent phones back in for support after flashing back stock firmware (flashing it after it "died").
Recently, I flashed my SGS I9000 with DarkyROM v11.0 Black Edition and all went smoothly. I did this while I was in Pakistan for the holidays. When I came back to the UK, I found that my phone wasn't getting any service, not from my old sim or my new sim. My new sim had been activated on the day I got back and it just showed the crossed-out triangle. My old sim was supposed to be working but it wasn't working on the phone for some reason. After a fair amount of hours spent on researching on the problem, I figured that my efs was corrupted. A symptom of this was that my imei had changed and I'm not sure how to get it back.
Samsung Services decided to shut the door in my face and I haven't any solutions as of yet.
What's your take on this? Do you have any solutions to this problem?
All help is greatly appreciated, thank you.
Any one have any solutions to this problem?
Why you did not backup of efs folder before flashing? ...sometimes flashing official gingerbread rom helps in getting imei back, so try that :/
This should help (replace Froyo by a Gingerbread release)
http://forum.xda-developers.com/showthread.php?t=1647890
Did it today with my dad's Galaxy S that lost service after installing CM9.
juvenile582 said:
What's your take on this? Do you have any solutions to this problem?
.
Click to expand...
Click to collapse
check out My Android Solutions, link below for the various options to solve efs & IMEI problems
juvenile582 said:
Recently, I flashed my SGS I9000 with DarkyROM v11.0 Black Edition and all went smoothly. I did this while I was in Pakistan for the holidays. When I came back to the UK, I found that my phone wasn't getting any service, not from my old sim or my new sim. My new sim had been activated on the day I got back and it just showed the crossed-out triangle. My old sim was supposed to be working but it wasn't working on the phone for some reason. After a fair amount of hours spent on researching on the problem, I figured that my efs was corrupted. A symptom of this was that my imei had changed and I'm not sure how to get it back.
Samsung Services decided to shut the door in my face and I haven't any solutions as of yet.
What's your take on this? Do you have any solutions to this problem?
All help is greatly appreciated, thank you.
Click to expand...
Click to collapse
i slove my IMEI problem buy using this step:
1) flash to stock rom and Check IMEI (*#06#) you will get the right IMEI number
2) connect you phone to the PC and copy the EFS file to the PC
3) Root the Phone and Flash to custom ROM you like (Check IMEI if is Wrong end with (0000)
4) Connect your phone to the PC and delete EFS folder on your PHONE
5) Copy the EFS file from your PC (Step2) and paste to your PHONE and restart the PHONE.
Hope this will help.
Samtan4326 said:
i slove my IMEI problem buy using this step:
1) flash to stock rom and Check IMEI (*#06#) you will get the right IMEI number
2) connect you phone to the PC and copy the EFS file to the PC
3) Root the Phone and Flash to custom ROM you like (Check IMEI if is Wrong end with (0000)
4) Connect your phone to the PC and delete EFS folder on your PHONE
5) Copy the EFS file from your PC (Step2) and paste to your PHONE and restart the PHONE.
Hope this will help.
Click to expand...
Click to collapse
Actually when I enter that code in, it gives me the IMEI i'm trying to get rid of.
Thanks for the suggestion!
When I lost my imei I just reflashed to stock couple times and my imei got restored automatically
Sent from my SGH-T959 using xda app-developers app
Mantis64 said:
This should help (replace Froyo by a Gingerbread release)
http://forum.xda-developers.com/showthread.php?t=1647890
Did it today with my dad's Galaxy S that lost service after installing CM9.
Click to expand...
Click to collapse
gun said:
When I lost my imei I just reflashed to stock couple times and my imei got restored automatically
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
I tried both of your ideas but it just wouldn't restore my imei for some reason. How many times did you flash yours?
I flashed different custom roms I think 4 and kept replacing them with stock rom
Sent from my SGH-T959 using xda app-developers app
Okay, I've hit a new low. You can blame my stupidity for this.
I was looking at xsenman's suggestions and I asked about one of his methods, he told me to use the M110S Repair kit which I downloaded. I opened it up and it shows a bunch files that I had to flash to my phone. While flashing my phone and eventually bricking it, I realised that the M110S is the Korean version and I just tried to flash that firmware onto mine, resulting in a brick. Basically, I hold the power button and it shows the Samsung Anycall logo and that's about the extent of the boot and my capabilities. I cannot go into download mode or recovery mode (via 3 buttons) it just tries to boot up the phone.
I have realized my complete idiocy at this point but I could use anything just to get my phone back up so that I can atleast continue trying to sort out the IMEI.
Today, 07:39 AM
juvenile582 said:
Hang on, this is for a different model...I've got the Samsung Galaxy S I9000 not the M110S.
Click to expand...
Click to collapse
Today, 07:46 AM
xsenman said:
hmmm, than you are on the wrong forum, anyway than you should try the solutions available for i9000 do you have any EFS backup? If not try downgrade to Froyo to see if it will work for you
Click to expand...
Click to collapse
Today, 05:58 PM
juvenile582 said:
Okay, I've hit a new low. You can blame my stupidity for this.
I was looking at xsenman's suggestions and I asked about one of his methods, he told me to use the M110S Repair kit which I downloaded. I opened it up and it shows a bunch files that I had to flash to my phone. While flashing my phone and eventually bricking it, I realised that the M110S is the Korean version and I just tried to flash that firmware onto mine, resulting in a brick. Basically, I hold the power button and it shows the Samsung Anycall logo and that's about the extent of the boot and my capabilities. I cannot go into download mode or recovery mode (via 3 buttons) it just tries to boot up the phone.
I have realized my complete idiocy at this point but I could use anything just to get my phone back up so that I can at east continue trying to sort out the IMEI.
Click to expand...
Click to collapse
Ok, this is rather strange and sad to hear , as you made a post in the Korean M110S Forum, my suggestions were for you to use the Korean repair kit at Today, 06:13 AM in response to a post made at Today, 03:07 AM.
But by Today, 07:39 AM, you responded I am referring to the wrong model and by Today, 07:46 AM, I advised you to use the i9000 froyo ROM instead .
So it sad to hear you still used the M110S repair kit knowingly , even after I advised you not to use it, at 07:46 AM today?
Anyway, what you should do is first power down, remove battery, remove SIM Card and Ext SD card, , press power button for a few min, than reinsert battery only and try for download mode or use Methods mention on MY Android Solutions, link below to achieve download mode .
Forget about recovery mode, get download mode and use PIT and full i9000 ROM package, use JVZ or JVU with boot loaders
I, Personally had tested i9000 ROMS on the M110S and spend a few hours flashing M110S repair kit over and over again to recover, so as long as your phone can get into download mode or with a help of a JIG, its not bricked.
xsenman said:
Today, 07:39 AM
Today, 07:46 AM
Today, 05:58 PM
Ok, this is rather strange and sad to hear , as you made a post in the Korean M110S Forum, my suggestions were for you to use the Korean repair kit at Today, 06:13 AM in response to a post made at Today, 03:07 AM.
But by Today, 07:39 AM, you responded I am referring to the wrong model and by Today, 07:46 AM, I advised you to use the i9000 froyo ROM instead .
So it sad to hear you still used the M110S repair kit knowingly , even after I advised you not to use it, at 07:46 AM today?
Anyway, what you should do is first power down, remove battery, remove SIM Card and Ext SD card, , press power button for a few min, than reinsert battery only and try for download mode or use Methods mention on MY Android Solutions, link below to achieve download mode .
Forget about recovery mode, get download mode and use PIT and full i9000 ROM package, use JVZ or JVU with boot loaders
I, Personally had tested i9000 ROMS on the M110S and spend a few hours flashing M110S repair kit over and over again to recover, so as long as your phone can get into download mode or with a help of a JIG, its not bricked.
Click to expand...
Click to collapse
At 7:39am, I had already flashed. At 7:30, I discovered that it was a different model. I spent some time trying to fix it before I sent that message.
Also, I'm going to try that jig method, see if it works.
juvenile582 said:
At 7:39am, I had already flashed. At 7:30, I discovered that it was a different model. I spent some time trying to fix it before I sent that message.
Also, I'm going to try that jig method, see if it works.
Click to expand...
Click to collapse
download combo keys may change when OTHER firmware are used on a phone, so you should try different combinations for download mode . For M110S , download mode is home key +power key...give it a try or
1) To enter download mode [volumedown+home+power] or home +power
2) While in this position, insert the battery
I once lost mine, and to get it back, I flashed back the last known good configuration.
Unfortunately sometimes these things happen.
Right, the phone is back onto Gingerbread 2.3.6 after a cheap jig that I ordered forced it into download mode. I then flashed froyo then gingerbread and now I'm back to where I started, no service and a missing imei.
I've had a development!
Okay, so after playing around with the phone, rooting and stuff. I managed to get my 3g working somehow but still no imei, texting or calling. Really strange how I can use internet but not be able to text or call anyone
juvenile582 said:
I've had a development!
Okay, so after playing around with the phone, rooting and stuff. I managed to get my 3g working somehow but still no imei, texting or calling. Really strange how I can use internet but not be able to text or call anyone
Click to expand...
Click to collapse
is it still in warranty?
TotallydubbedHD said:
is it still in warranty?
Click to expand...
Click to collapse
From what I know of rooting, my warranty's void by now. (It's like the tenth time I've rooted it)
juvenile582 said:
From what I know of rooting, my warranty's void by now. (It's like the tenth time I've rooted it)
Click to expand...
Click to collapse
if you get back on stock rom, wipe everything - samsung won't know
So my question remains
I would try figuring it out via google searches etc - but if you can't you could always send it into samsung.