Recently, I flashed my SGS I9000 with DarkyROM v11.0 Black Edition and all went smoothly. I did this while I was in Pakistan for the holidays. When I came back to the UK, I found that my phone wasn't getting any service, not from my old sim or my new sim. My new sim had been activated on the day I got back and it just showed the crossed-out triangle. My old sim was supposed to be working but it wasn't working on the phone for some reason. After a fair amount of hours spent on researching on the problem, I figured that my efs was corrupted. A symptom of this was that my imei had changed and I'm not sure how to get it back.
Samsung Services decided to shut the door in my face and I haven't any solutions as of yet.
What's your take on this? Do you have any solutions to this problem?
All help is greatly appreciated, thank you.
Any one have any solutions to this problem?
Why you did not backup of efs folder before flashing? ...sometimes flashing official gingerbread rom helps in getting imei back, so try that :/
This should help (replace Froyo by a Gingerbread release)
http://forum.xda-developers.com/showthread.php?t=1647890
Did it today with my dad's Galaxy S that lost service after installing CM9.
juvenile582 said:
What's your take on this? Do you have any solutions to this problem?
.
Click to expand...
Click to collapse
check out My Android Solutions, link below for the various options to solve efs & IMEI problems
juvenile582 said:
Recently, I flashed my SGS I9000 with DarkyROM v11.0 Black Edition and all went smoothly. I did this while I was in Pakistan for the holidays. When I came back to the UK, I found that my phone wasn't getting any service, not from my old sim or my new sim. My new sim had been activated on the day I got back and it just showed the crossed-out triangle. My old sim was supposed to be working but it wasn't working on the phone for some reason. After a fair amount of hours spent on researching on the problem, I figured that my efs was corrupted. A symptom of this was that my imei had changed and I'm not sure how to get it back.
Samsung Services decided to shut the door in my face and I haven't any solutions as of yet.
What's your take on this? Do you have any solutions to this problem?
All help is greatly appreciated, thank you.
Click to expand...
Click to collapse
i slove my IMEI problem buy using this step:
1) flash to stock rom and Check IMEI (*#06#) you will get the right IMEI number
2) connect you phone to the PC and copy the EFS file to the PC
3) Root the Phone and Flash to custom ROM you like (Check IMEI if is Wrong end with (0000)
4) Connect your phone to the PC and delete EFS folder on your PHONE
5) Copy the EFS file from your PC (Step2) and paste to your PHONE and restart the PHONE.
Hope this will help.
Samtan4326 said:
i slove my IMEI problem buy using this step:
1) flash to stock rom and Check IMEI (*#06#) you will get the right IMEI number
2) connect you phone to the PC and copy the EFS file to the PC
3) Root the Phone and Flash to custom ROM you like (Check IMEI if is Wrong end with (0000)
4) Connect your phone to the PC and delete EFS folder on your PHONE
5) Copy the EFS file from your PC (Step2) and paste to your PHONE and restart the PHONE.
Hope this will help.
Click to expand...
Click to collapse
Actually when I enter that code in, it gives me the IMEI i'm trying to get rid of.
Thanks for the suggestion!
When I lost my imei I just reflashed to stock couple times and my imei got restored automatically
Sent from my SGH-T959 using xda app-developers app
Mantis64 said:
This should help (replace Froyo by a Gingerbread release)
http://forum.xda-developers.com/showthread.php?t=1647890
Did it today with my dad's Galaxy S that lost service after installing CM9.
Click to expand...
Click to collapse
gun said:
When I lost my imei I just reflashed to stock couple times and my imei got restored automatically
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
I tried both of your ideas but it just wouldn't restore my imei for some reason. How many times did you flash yours?
I flashed different custom roms I think 4 and kept replacing them with stock rom
Sent from my SGH-T959 using xda app-developers app
Okay, I've hit a new low. You can blame my stupidity for this.
I was looking at xsenman's suggestions and I asked about one of his methods, he told me to use the M110S Repair kit which I downloaded. I opened it up and it shows a bunch files that I had to flash to my phone. While flashing my phone and eventually bricking it, I realised that the M110S is the Korean version and I just tried to flash that firmware onto mine, resulting in a brick. Basically, I hold the power button and it shows the Samsung Anycall logo and that's about the extent of the boot and my capabilities. I cannot go into download mode or recovery mode (via 3 buttons) it just tries to boot up the phone.
I have realized my complete idiocy at this point but I could use anything just to get my phone back up so that I can atleast continue trying to sort out the IMEI.
Today, 07:39 AM
juvenile582 said:
Hang on, this is for a different model...I've got the Samsung Galaxy S I9000 not the M110S.
Click to expand...
Click to collapse
Today, 07:46 AM
xsenman said:
hmmm, than you are on the wrong forum, anyway than you should try the solutions available for i9000 do you have any EFS backup? If not try downgrade to Froyo to see if it will work for you
Click to expand...
Click to collapse
Today, 05:58 PM
juvenile582 said:
Okay, I've hit a new low. You can blame my stupidity for this.
I was looking at xsenman's suggestions and I asked about one of his methods, he told me to use the M110S Repair kit which I downloaded. I opened it up and it shows a bunch files that I had to flash to my phone. While flashing my phone and eventually bricking it, I realised that the M110S is the Korean version and I just tried to flash that firmware onto mine, resulting in a brick. Basically, I hold the power button and it shows the Samsung Anycall logo and that's about the extent of the boot and my capabilities. I cannot go into download mode or recovery mode (via 3 buttons) it just tries to boot up the phone.
I have realized my complete idiocy at this point but I could use anything just to get my phone back up so that I can at east continue trying to sort out the IMEI.
Click to expand...
Click to collapse
Ok, this is rather strange and sad to hear , as you made a post in the Korean M110S Forum, my suggestions were for you to use the Korean repair kit at Today, 06:13 AM in response to a post made at Today, 03:07 AM.
But by Today, 07:39 AM, you responded I am referring to the wrong model and by Today, 07:46 AM, I advised you to use the i9000 froyo ROM instead .
So it sad to hear you still used the M110S repair kit knowingly , even after I advised you not to use it, at 07:46 AM today?
Anyway, what you should do is first power down, remove battery, remove SIM Card and Ext SD card, , press power button for a few min, than reinsert battery only and try for download mode or use Methods mention on MY Android Solutions, link below to achieve download mode .
Forget about recovery mode, get download mode and use PIT and full i9000 ROM package, use JVZ or JVU with boot loaders
I, Personally had tested i9000 ROMS on the M110S and spend a few hours flashing M110S repair kit over and over again to recover, so as long as your phone can get into download mode or with a help of a JIG, its not bricked.
xsenman said:
Today, 07:39 AM
Today, 07:46 AM
Today, 05:58 PM
Ok, this is rather strange and sad to hear , as you made a post in the Korean M110S Forum, my suggestions were for you to use the Korean repair kit at Today, 06:13 AM in response to a post made at Today, 03:07 AM.
But by Today, 07:39 AM, you responded I am referring to the wrong model and by Today, 07:46 AM, I advised you to use the i9000 froyo ROM instead .
So it sad to hear you still used the M110S repair kit knowingly , even after I advised you not to use it, at 07:46 AM today?
Anyway, what you should do is first power down, remove battery, remove SIM Card and Ext SD card, , press power button for a few min, than reinsert battery only and try for download mode or use Methods mention on MY Android Solutions, link below to achieve download mode .
Forget about recovery mode, get download mode and use PIT and full i9000 ROM package, use JVZ or JVU with boot loaders
I, Personally had tested i9000 ROMS on the M110S and spend a few hours flashing M110S repair kit over and over again to recover, so as long as your phone can get into download mode or with a help of a JIG, its not bricked.
Click to expand...
Click to collapse
At 7:39am, I had already flashed. At 7:30, I discovered that it was a different model. I spent some time trying to fix it before I sent that message.
Also, I'm going to try that jig method, see if it works.
juvenile582 said:
At 7:39am, I had already flashed. At 7:30, I discovered that it was a different model. I spent some time trying to fix it before I sent that message.
Also, I'm going to try that jig method, see if it works.
Click to expand...
Click to collapse
download combo keys may change when OTHER firmware are used on a phone, so you should try different combinations for download mode . For M110S , download mode is home key +power key...give it a try or
1) To enter download mode [volumedown+home+power] or home +power
2) While in this position, insert the battery
I once lost mine, and to get it back, I flashed back the last known good configuration.
Unfortunately sometimes these things happen.
Right, the phone is back onto Gingerbread 2.3.6 after a cheap jig that I ordered forced it into download mode. I then flashed froyo then gingerbread and now I'm back to where I started, no service and a missing imei.
I've had a development!
Okay, so after playing around with the phone, rooting and stuff. I managed to get my 3g working somehow but still no imei, texting or calling. Really strange how I can use internet but not be able to text or call anyone
juvenile582 said:
I've had a development!
Okay, so after playing around with the phone, rooting and stuff. I managed to get my 3g working somehow but still no imei, texting or calling. Really strange how I can use internet but not be able to text or call anyone
Click to expand...
Click to collapse
is it still in warranty?
TotallydubbedHD said:
is it still in warranty?
Click to expand...
Click to collapse
From what I know of rooting, my warranty's void by now. (It's like the tenth time I've rooted it)
juvenile582 said:
From what I know of rooting, my warranty's void by now. (It's like the tenth time I've rooted it)
Click to expand...
Click to collapse
if you get back on stock rom, wipe everything - samsung won't know
So my question remains
I would try figuring it out via google searches etc - but if you can't you could always send it into samsung.
Related
Phone was flashed to 2.2, however after shutting down the phone and booting it up again, I get Black SCREEN + glowing buttons.
Device : Samsung i9000 from Bell running flashed 2.2 Rom.
I've tried following this guide :
STAGE 1 (applies only if you are coming from an earlier Froyo build)
* We are now going to flash the XWJM8 firmware again (Éclair), so make sure that you load the files for this firmware in Odin.
* In PIT, load the 502.PIT file
* For PDA, select the ‘CODE_I9000XWJM8.tar.md5’ file and for PHONE, select the ‘MODEM_I9000XXJM4.tar.md5’ file. Leave all others blank.
* Make sure that the Re-partition box is checked. All other settings should be as shown in the screenshot below.
*Sorry can't post link, forum restriction*
After stage 1, Odin says Passed, my i9000 reboots with still a black screen+ glowing buttons.
I want to start Stage 2, however I can't find the file ‘JPO_JPO_U_JPP.tar’ file.
I've looked up for solution for the last 2 days and can't seem to find a solution anywhere.
Things I've tried on my own without sucess :
Flashed again this time with a CSC from bell, I've read that sometimes without CSC flashing can't be done, but even with the CSC files, my phone is still ''bricked''
Anyone have any idea how to fix this? Ultimately, I want to go back on 2.2 but for now, I just want my phone to boot again =(.
Hate to say it but it sounds like yout internal sd card is dead like MANY OTHERS who have flashed... No way to fix except to send for repairs to bell/samsung...
Sent from my GT-I9000M using XDA App
I wish you'd stop stating that flashing fubar's your phone. Many people running stock, unrooted devices are reporting the same problem.
Isn't there a way to try and access internal sd card?
Have you try doing a factory reset?
Yeah, I've tried doing so, after reading and researching online, I think this could fix my problem.
forum.cyanogenmod.com/topic/6433-solved-messed-up-partitions-on-internal-storage/
see reply #7
However adb doesn't even reconize the phone =/
terranq said:
I wish you'd stop stating that flashing fubar's your phone. Many people running stock, unrooted devices are reporting the same problem.
Click to expand...
Click to collapse
I diddnt specifically mean that it was the flashing that did it but it is OBVIOUS that it happened after he flashed right???
It is known that flashing will sometimes "speed up" the death of an already faulty sd card and that is what I meant by my original post...
And PS... The number of people reporting their sd cards failing on stock firmware w/ no lagfix or no previous flashes to "unofficial firmware" is WAY lower than those reporting sd card death after flashing or adding lagfixes, etc...
Which obviously points to an existing hardware fault that is exacerbated by flashing, not caused by flashing
terranq said:
Which obviously points to an existing hardware fault that is exacerbated by flashing, not caused by flashing
Click to expand...
Click to collapse
And again... I did not specifically state that it was the "flashing" that killed the OP's phone. I simply stated that this seems to happen to MANY people after they flash. NOT the same thing...
Did you come to this thread to argue or to help the OP? I simply posted a reply last night stating that it seems his internal SD card is dead so that he could prepare himself for having to send it away for repairs. I did not respond to the OP to get into an arguement with anyone over "what causes the internal SD cards to fail".
Don't argue guys! I appreciate all your help
What is the best way to ''fix the internal sd card''
Isn't there a way to like factory reset the internal sd card.
cuem said:
Don't argue guys! I appreciate all your help
What is the best way to ''fix the internal sd card''
Isn't there a way to like factory reset the internal sd card.
Click to expand...
Click to collapse
@cuem,
Unfortunately... If it is an actual dead internal sd card (which it seems to be since the steps you followed already did not seem to fix the issue) the only way to fix it is to send it back to Bell who in turn will send it off for warranty repair.
IF you have just purchased the phone within the last 30 days (possibly 60 if Bell is still extending the DOA return policy) and you have a receipt you can take it back to Bell and get an exchange.
Again, unfortunately these are your only options to get this fixed...
Sorry to be the bearrer of bad news...
Just when I think this couldn't get worst,I was wrong.
I tried using Odin3 One-click downloader, I wanted to flash it with At&t stock firmware( hopefully it would work) then flash it again with 2.1 clair
After using Odin3 One-click downloader, it said sucessed, but now my phone is STUCK on At&t blinking logo and I can't go into download mode anymore.
I've tried the 3 keys combo, adb doesn't reconize the phone.
I'm pretty much screwed,warranty won't work if Bell sees At&T logo blinking upon power up.......
cuem said:
Just when I think this couldn't get worst,I was wrong.
I tried using Odin3 One-click downloader, I wanted to flash it with At&t stock firmware( hopefully it would work) then flash it again with 2.1 clair
After using Odin3 One-click downloader, it said sucessed, but now my phone is STUCK on At&t blinking logo and I can't go into download mode anymore.
I've tried the 3 keys combo, adb doesn't reconize the phone.
I'm pretty much screwed,warranty won't work if Bell sees At&T logo blinking upon power up.......
Click to expand...
Click to collapse
Ooooooo... That is not good. The American Vibrant is NOT the same as out i9000 models.
What you need to do now is search the forums for the homemade jig thread that will force your device into download mode. Search the forums and you will find it.
Be prepared to be "handy" as you will have to build the jig from scratch...
Sent from my GT-I9000M using XDA App
Yeah, I've read about the Jig thing, I've also read about heating your phone with a hairdryer,
I'm currently trying out the hairdryer, but it doesn't work =/
Might have to try the Jig thing, which seems a little complicated with ordering since I'm running out of time =/
Jig worked, im back to my intial problem.
BLACK SCREEN + GLOWING BUTTON.
This has happened to me, I just flashed with an older version, for me JM5 worked fine.
cuem said:
Jig worked, im back to my intial problem.
BLACK SCREEN + GLOWING BUTTON.
Click to expand...
Click to collapse
I had the same thing after flash and spent many hours and tried many different methods to get it back up with no success.
I'm leaving the country for Europe on January 2nd for vacation. This was the last thing I needed... Hopefully I get it back before then, but I'm not holding my breath.
cuem said:
Jig worked, im back to my intial problem.
BLACK SCREEN + GLOWING BUTTON.
Click to expand...
Click to collapse
Well... At the very least at least the firmware is now correct so you can send it away for repair if you need to...
Sent from my GT-I9000M using XDA App
I followed this guide
http://www.tunandroid.com/content/i...du-firmware-i9000xwjpa-pour-samsung-galaxy-s/
I believe now oneclicklagfix is installed on my device, can I flash again or that'll brick my phone, how do I uninstall oneclicklagfix if I can't boot up the phone but only acesss clockwork mod menu?
Hi,
Last night my Galaxy S was low on battery, and I kept trying to turn it on for it to die right away (it was working as expected I guess)
This morning after I charged my phone it wouldn't turn on at all! It loads to the logo screen, makes that jingle sound and then holds and doesn't turn on.
I can get to recovery and download mode.
I put OCLF on like 2 months ago, but haven't modded/flashed ANYTHING since. It is very bizarre how it just died.
I'm wondering what my options are now. Obviously I would rather not loose all my personal files. Since I can get into download mode, can I just flash a new firmware? I'd like FroYo anyway, but I haven't got a clue what to do.
Great start to the year – !
Cheers,
Mitch
EDIT: I just decided to try the "Clear User Cache" option and then reboot to no avail. Now I can't get back into recovery mode!?!? Download mode still works. Huhh?? Is this expected? Have I lose Recovery Mode entirely now? Crap.
seeeems like an odin flash via the download mode is the only way. There are a few tutorials on this site and even tut vids on youtube so you should be fine if you just follow everything they do (as long as it works for them of course)
How do I know what version to flash? I have read a few tutorials and they all have started with "Dial x and check you have y" etc. Obviously I can't do any of that.
What is the *safest* firmware I can flash?
My phone currently has some optus variety.
Please forgive the noodish question.
Mitch
Where are you located? And who is your provider?
Hi,
I'm in Sydney Australia and my provider is Optus.
Thanks
Hi,
I still can't get my phone working and am not clear how to proceed.
What would be the best firmware to flash to my Optus Galaxy S that bricked out of the blue? Should I just send it back to Samsung?
Thank You
m1tch37 said:
Hi,
I still can't get my phone working and am not clear how to proceed.
What would be the best firmware to flash to my Optus Galaxy S that bricked out of the blue? Should I just send it back to Samsung?
Thank You
Click to expand...
Click to collapse
Hey mate go to samfirmware and get I9000DTJG4 thats the stock optus rom once you get phone up and running then upgrade to 2.2.1.
Sounds like you'll need to do a flash of a stock rom..
By the way, the old oclf had some issues that might lead to system corruption (unfortunately I'm not very sure exactly what it does, or whether it could lead to this problem). I'd suggest getting one of the newer lag fixes available here when you do get your phone running again
tragusman said:
Hey mate go to samfirmware and get I9000DTJG4 thats the stock optus rom once you get phone up and running then upgrade to 2.2.1.
Click to expand...
Click to collapse
tragusman has got it right. Depending on what the issue is, you'll either recover nicely or your phone is toast. Flash the above stock firmware and give it a shot. Note that you'll likely loose your data and settings.
If you're new to flashing firmwares, check the great reference guide on where to find Odin and how to use it (this is the app you'll use to flash the above firmware).
http://forum.xda-developers.com/showthread.php?t=723596
After flashing, try getting into recovery mode. If you can look for an error message under the standard menu. Can't get to d/l mode? You're probably in trouble. Get into recovery and see an error msg? Post the error here or google it for a solution. No error msg? You're probably ok - restart the phone.
Good luck.
Thanks guys.
I'm about to try it now, but before I start potentially breaking my phone even more, I was just thinking: Could I just send it back to Samsung? Would they fix it, or identify right away I have changed something and void my warranty.
Mitch
m1tch37 said:
Thanks guys.
I'm about to try it now, but before I start potentially breaking my phone even more, I was just thinking: Could I just send it back to Samsung? Would they fix it, or identify right away I have changed something and void my warranty.
Mitch
Click to expand...
Click to collapse
If it's broke, you can't break it any more I've sent phones back in for support after flashing back stock firmware (flashing it after it "died").
So I was retarded and followed the instructions (or started to) on androidadvices dot com/how-to-update-samsung-galaxy-tab-to-stable-gingerbread-2-3-3-firmware
My Tablet will not boot past the T-Mobile logo.......... they are being assholes and telling me i need to deal with samsung ......... who told me it would be 6-8 weeks for a replacement........ is there ANYONE out there that can help me with just resetting it???
If you can get to the T_Mobile logo, you probably have a working bootloader and that mean you just need to flash the correct firmware for you device.
In short words, go to samfirmware.com and download the right firmware for your tablet model.
Once you have the firmware, flash them to your tablet with 'odin' (flash software, that you can also get in the mentioned website).
This should solve the problem.
If this works I will love you.
So i am obviously more retarded than I thought pedrohfsd ........ I have an SGH-T849 and i cannot FIND the firmware on that site..... seriously? UGH
pm me i'll tell you what to do , with th stock firmware for Tmobile , i helped someone before 2days he had same tab with you ) and same problem
pedrohfsd said:
If you can get to the T_Mobile logo, you probably have a working bootloader and that mean you just need to flash the correct firmware for you device.
In short words, go to samfirmware.com and download the right firmware for your tablet model.
Once you have the firmware, flash them to your tablet with 'odin' (flash software, that you can also get in the mentioned website).
This should solve the problem.
Click to expand...
Click to collapse
You sir, are brilliant.
I wasn't able to locate the firmware on the samfirmware.com but I DID find it on XDA from another user. Put phone into download mode... waited till the little box in Odin turned yellow and loaded that badboy on there. After about 5 minutes it was back into the 2.2 OS again. The only problem that I had was with programs that had been installed before and loaded at boot (Just had to uninstall / reinstall) But for the most part its back to the way it was.
Thanks so much for your help!
You too Kosh, as I am sure you were going to walk me through exactly what I fumbled through on my own (I'm lucky I didn't blow anything up haha)
NO more attempts to get 2.3 on this badboy!
Thanks again all <3
I'm glad to hear that KalKainen, the first time i soft bricked my phone i got desperate too.
But after some weeks i saw the inumerous progressions that people develop in custom roms here in xda, and flashed the whole thing again =P.
pedrohfsd said:
I'm glad to hear that KalKainen, the first time i soft bricked my phone i got desperate too.
But after some weeks i saw the inumerous progressions that people develop in custom roms here in xda, and flashed the whole thing again =P.
Click to expand...
Click to collapse
Amen man..... desprate is about right.. haha... now if i could only figure out why i have to CONSTANTLY reboot it in order to restore network service (Even though I have 3g and full bars... no text messages send / come in and programs that use data error out... ) I would be happy. This has been happening for the last 4 months badly enough that I can have to reset it 10 times in a 2 hour period >.< I cant even put it into flight mode.... but after I TRY putting it into flight mode and then reboot it... it comes BACK in flight mode.... I hoped the reinstall of the firmware would fix it.. but alas..... still plagued. AT LEAST IT WORKS THOUGH!!
Hello there,
I just bought a galaxy note <well a week ago> and now i ended up soft bricking it.
here's how i did it -
I went to my friends place thinking of rooting my phone while he told me to add a custom rom to it . well since he was experienced i let him do it . he added a firmware of i9200(chinese ). well it worked now i found some chinese system applications that i didn't need and while searching on net how to do it i found a firmware of n7000 ics online and decided to flash it in. since i was at home i thought i would be able to do it myself and did what i shouldn't have done. i followed every step they said online and started the downloading of the rom but unfortunately when pc odin was at it's end i mean the end of downloading i actually disconnected the cable ( what the f*** was i thinking) . now i tried to reinstall the same rom but couldn't - pc odin always showed setting up connection or something like this and then stalled for hours ... i thought of flashing some other rom but it didn't - same thing <stalling for hours> . Now what should i do??? help me - maybe i can go to samsung customer care service and ask them to reset my phone but since the usb debugging was on last time when i turned my phone off , kies might not do the job . can u suggest me a way.
one more thing i can't flash stock rom into it and <i am dumb> i didn't backed up my stock rom.
p.s. my flash count is 2 . i can't load my phone into recovery mode but can into download mode and can't do it with a jig (am from india plus i am a little low on technical know how).
i can't hard reset it either. a suitable help would be appreciated ,pls
kunalteji1993 said:
Hello there,
I just bought a galaxy note <well a week ago> and now i ended up soft bricking it.
here's how i did it -
I went to my friends place thinking of rooting my phone while he told me to add a custom rom to it . well since he was experienced i let him do it . he added a firmware of i9200(chinese ). well it worked now i found some chinese system applications that i didn't need and while searching on net how to do it i found a firmware of n7000 ics online and decided to flash it in. since i was at home i thought i would be able to do it myself and did what i shouldn't have done. i followed every step they said online and started the downloading of the rom but unfortunately when pc odin was at it's end i mean the end of downloading i actually disconnected the cable ( what the f*** was i thinking) . now i tried to reinstall the same rom but couldn't - pc odin always showed setting up connection or something like this and then stalled for hours ... i thought of flashing some other rom but it didn't - same thing <stalling for hours> . Now what should i do??? help me - maybe i can go to samsung customer care service and ask them to reset my phone but since the usb debugging was on last time when i turned my phone off , kies might not do the job . can u suggest me a way.
one more thing i can't flash stock rom into it and <i am dumb> i didn't backed up my stock rom.
p.s. my flash count is 2 . i can't load my phone into recovery mode but can into download mode and can't do it with a jig (am from india plus i am a little low on technical know how).
i can't hard reset it either. a suitable help would be appreciated ,pls
Click to expand...
Click to collapse
I have no experience with this, but I did keep this video link on how to put a bricked Samsung into download mode just in case I needed it. The usb jig is the same for both the captivate and the Note from what I have read:
http://androidforums.com/captivate-...ung-captivate-usb-jig-video-start-finish.html
If you are able to enter download mode then Just try with different version of PC Odin , like V1.83, V1.85, V1.87. and do not worry about Stock ROM you can always download it from below link.
http://forum.xda-developers.com/showthread.php?t=1329360
thankyou guys but i can't use jig since i can't buy it nor am i capable of making one.
Rajan , bro my problem is something different. the roms i am trying to insert in my phone was via the odin i used earlier to flash my first rom. and it went successfully . but last time the second rom i inserted was interrupted during download and am not able to add anymore of them. now i have talked to samsung care and they told me to bring my phone along with the bill maybe they can do it. even though my warranty is done for, but i think i can believe them . yet if there are any other suggestions pls tell me or should i give it to samsung care. I really don't wanna keep my phone rooted so i have no problem flashing stock but it's not happening. CAN KIES HELP?
p.s i have used all 1.85 , 1.87 and 1.83 version no use.
kunalteji1993 said:
thankyou guys but i can't use jig since i can't buy it nor am i capable of making one.
Rajan , bro my problem is something different. the roms i am trying to insert in my phone was via the odin i used earlier to flash my first rom. and it went successfully . but last time the second rom i inserted was interrupted during download and am not able to add anymore of them. now i have talked to samsung care and they told me to bring my phone along with the bill maybe they can do it. even though my warranty is done for, but i think i can believe them . yet if there are any other suggestions pls tell me or should i give it to samsung care. I really don't wanna keep my phone rooted so i have no problem flashing stock but it's not happening. CAN KIES HELP?
p.s i have used all 1.85 , 1.87 and 1.83 version no use.
Click to expand...
Click to collapse
I fear your Note is done for, if your PC Odin session got interrupted.
chasmodo said:
I fear your Note is done for, if your PC Odin session got interrupted.
Click to expand...
Click to collapse
don't say that ... help me my situation is getting even worse now... will i be able to recover my phone!???! help me help me!
kunalteji1993 said:
don't say that ... help me my situation is getting even worse now... will i be able to recover my phone!???! help me help me!
Click to expand...
Click to collapse
Dont take it service centre.If you do so also dont say them you flashed custom rom.Then they wont fix it under warranty.Dont worry now.
Try different usb ports,uninstalling drivers and reinstalling it and try again.And as you are noob I recommend not to flash ICS customs at the moment.Stay with GB
I say go to your friend first who rooted your phone then ask him to try the various methods given in the forum recovering from softbrick.
i have read in some other websites that i will need a pit file to restore my phone + the rom file while checking repartition and auto time fe: reset in odin 1.83 then maybe i will be able to return back to gb . do u think this is ok for me to do .
p.s i live in chandigarh while my friend has moved to gurgaon so no chance to go to his place. and i have talked to customer care and told them everything. they told me to take the phone to service centre and they will help me.
now tell me what are my options!?
kunalteji1993 said:
i have read in some other websites that i will need a pit file to restore my phone + the rom file while checking repartition and auto time fe: reset in odin 1.83 then maybe i will be able to return back to gb . do u think this is ok for me to do .
p.s i live in chandigarh while my friend has moved to gurgaon so no chance to go to his place. and i have talked to customer care and told them everything. they told me to take the phone to service centre and they will help me.
now tell me what are my options!?
Click to expand...
Click to collapse
Ok now try to flash abyss kernel with red pill first lets see if it revives the phone.Yeah you are right pit file is required when you tick repartition and auto reboot and f.reset must be ticked all time.
vijai2011 said:
Ok now try to flash abyss kernel with red pill first lets see if it revives the phone.Yeah you are right pit file is required when you tick repartition and auto reboot and f.reset must be ticked all time.
Click to expand...
Click to collapse
wait . what? what is this red pill and all .. i think you can save me but i would liike you to brief me about the procedure plus i read this - i need a (wipe) rom to be able to reflash my rom or something like this .
p.s i am still downloading my firmware ...
but would be better if i get the info i need before hand!
dude.. don't panic... I don't think ur phone is dead... best is to buy a jig... try on eBay... I got it for 200rs in eBay... I don't think that's a big deal for any one with a note .. I bought it even before experimenting because I thought some thing like this might happen....
its safest way to remove the triangle and get into recovery mode... as somebody else suggested flashing red pill also works ... search in development section for abyss kernel... ull find it...
kunalteji1993 said:
wait . what? what is this red pill and all .. i think you can save me but i would liike you to brief me about the procedure plus i read this - i need a (wipe) rom to be able to reflash my rom or something like this .
p.s i am still downloading my firmware ...
but would be better if i get the info i need before hand!
Click to expand...
Click to collapse
its a kernel with a custom recovery.Its like CWM(Clock Work Mod).You could find it in the development section.Download the kernel.Could you get into recovery mode by turning off the phone,holding "vol up+home button+powerbutton"?
---------- Post added at 09:08 AM ---------- Previous post was at 09:00 AM ----------
kvsandeepreddy said:
dude.. don't panic... I don't think ur phone is dead... best is to buy a jig... try on eBay... I got it for 200rs in eBay... I don't think that's a big deal for any one with a note .. I bought it even before experimenting because I thought some thing like this might happen....
its safest way to remove the triangle and get into recovery mode... as somebody else suggested flashing red pill also works ... search in development section for abyss kernel... ull find it...
Click to expand...
Click to collapse
No need for jig because he can enter DL mode.And did using jig removed the yellow triangle for you
thanx guys for helping and current updates ---
i am in 12 th so untill my entrance exams are over i won't get to have the phone in my possession since my dad has it now ... so maybe after they are over i will continue on my quest to get it corrected!
well my note is all well except one thing. now whenever i connect note to kies it shows kies dpn't support upgrading of my device. my kernel is lc1 (inu)...
help pls?
kunalteji1993 said:
well my note is all well except one thing. now whenever i connect note to kies it shows kies dpn't support upgrading of my device. my kernel is lc1 (inu)...
help pls?
Click to expand...
Click to collapse
how did you fix it? this may help some else in the future
ratcom said:
how did you fix it? this may help some else in the future
Click to expand...
Click to collapse
service centre guys....remember he/she saying in pm
kunalteji1993 said:
well my note is all well except one thing. now whenever i connect note to kies it shows kies dpn't support upgrading of my device. my kernel is lc1 (inu)...
help pls?
Click to expand...
Click to collapse
wenn connecting to Kies at firmware Kies says something like LC1. lb2 (XXX) as product code? if so they have changed the board on the service center and they haven't activate the Pcode on your phone google "Pcode not active" you will find few posts till now only ppl from Germany had it who send their phones to service center via Saturn/Media Markt ist guess it was/is a technician you was sleeping on the seminare/briefing how to change the board on Note. hope it will help you if it is that try to replace your phone, had the XXX Pcode after service center got a replacement. after a month of arguing with the salesman.
Sent from my GT-N7000 using Tapatalk 2
Uninstall the Odin in your PC and install it again to see if it works.
i am pretty much sure that they didn't change the mother board. they must have added the firmware that's all as my mboard wasn't damaged at all , it was just that the battery failed when i gave it to samsung people that's why my phone overheated when they charged it and that's when the battery must have been destroyed maybe due to that overheating they must have thought to change mboard (but they didn't cause those engineers must have changed the battery prior to examining my phone for the problem). AND i didn't have pc odin on my THIS pc to start with. it was in my laptop and kies didn't even reckoned my phone there well that's why i installed kies on HERE . i guess service center people can update it the same way they installed this firmware here..... what do u suggest?
AND Braxos Pcode is active --- it's something :
GT-N7000ZBAINU
and no, the current firmware info kies shows is something like ---
N7000DDLC1/N7000ODDLC1/N7000DDLC1/N7000DDLC1(INU)
(now i think they have done something wrong - it's all n7000ddlc1 here. what is this? )
GUYS can u also tell me what does your firmware version shows (just for reference , pls do it!)
p.s my phone is still in warranty since they fixed my phone free of cost plus they also replaced the battery for free . before my phone was sent to service center my phone had a flash count of two yet they fixed it under warranty(yay!).And thank you everyone!
MY ADVICE TO NEWBIES----
If your phone is soft bricked and you don't know what to do and you think you will make the matter even worse then don't do anything to permanently brick it . you guys should go to service center , they might even fix it for u for free just like they did it for me!
So the other day i was on my captivate and i had just factory reset it to original eclair. so i tried updating it with kies but it kept failing. So i then tried using Odin and accidently checked bootloader and now my phone turned off and wont show any signs of life. PLEASE IM ASKING YOU PLEASE HELP! What do I do?
Can u get into Download mode with button combo or jig ?
If ur phone shows zero signs of life, even when plugged in to a wall charger, then it is probably hard bricked and so u will need jtag service in order to bring ur phone back to life. Check out mobiletechvideos.com, they can fix ur phone.
4-2ndtwin said:
Can u get into Download mode with button combo or jig ?
If ur phone shows zero signs of life, even when plugged in to a wall charger, then it is probably hard bricked and so u will need jtag service in order to bring ur phone back to life. Check out mobiletechvideos.com, they can fix ur phone.
Click to expand...
Click to collapse
But i dont get it. I was flashing with odin and it magically formatted the bootloader. Is there a way for me to fix it by myself like restoring the bootloader. I got my phone only 2 month ago. I dont have 40 dollars to invest on jtag service. Like how would they fix it. Could I please get instructions? Thanks and most help is appreciated
Theboss14 said:
But i dont get it. I was flashing with odin and it magically formatted the bootloader. Is there a way for me to fix it by myself like restoring the bootloader. I got my phone only 2 month ago. I dont have 40 dollars to invest on jtag service. Like how would they fix it. Could I please get instructions? Thanks and most help is appreciated
Click to expand...
Click to collapse
It doesn't format the bootloaders per say, it you flash a stock ROM with Odin that has bootloaders and if it gets interrupted while it's replacing them, your phone will be bricked as it doesn't have a way to boot (hence the name bootloaders).
The JTAG service basically pushes the bootloaders into the phone. It's something we can't do on our own unless we have the right equipment (riftbox).
Like 4-2ndtwin mentioned, try to get some response from your phone, anything that would show life. That means you can recover on your phone. From there, you'd have to be able to get in download mode and flash Odin KK4 without ANY interruption.
My phone wont turn on and when i put it in charge it wont even show the battery charging. What else can i do to fix my phone?
Theboss14 said:
My phone wont turn on and when i put it in charge it wont even show the battery charging. What else can i do to fix my phone?
Click to expand...
Click to collapse
Try the button combo to get in download mode (could even try a jig). If that fails too, you'll have to get jtag service.
Sent from my SGH-I747 using xda app-developers app
:cyclops:Fine If i Have to send my captivate for a jtag then i guess i will if thats my only options. But I find the one on mobiletechvideos really expensive does anyone know an alternative. Thanks. I apreciate it if you tell me.
Theboss14 said:
:cyclops:Fine If i Have to send my captivate for a jtag then i guess i will if thats my only options. But I find the one on mobiletechvideos really expensive does anyone know an alternative. Thanks. I apreciate it if you tell me.
Click to expand...
Click to collapse
The only alternative I can suggest you is to find that service around your place, hopefully for cheaper.
Yo. I think this service is legit. Is it?
On ebay.com
/itm/Samsung-Galaxy-Riff-Box-JTAG-Boot-Restore-Unbrick-Service-/271281826547?pt=US_Cell_Phone_Replacement_Parts_Tools&hash=item3f29a82af3
Theboss14 said:
Yo. I think this service is legit. Is it?
On ebay.com
/itm/Samsung-Galaxy-Riff-Box-JTAG-Boot-Restore-Unbrick-Service-/271281826547?pt=US_Cell_Phone_Replacement_Parts_Tools&hash=item3f29a82af3
Click to expand...
Click to collapse
Kinda hard to know. look at the seller's rep Imo.
Samsung Captivate is dead, unable to go in download mode....
Hi,
I also have similar kind of issue which is still not resolved.Long time back postem my problem regarding my samsung captivate phone, I tried all the solution provided my members of this community to fix my issue. But it is still not resolve.
Could you please look in to my thread, and advise me what could be the problem and how can I repair my phone ?
Below is link to my thread where I have mentioned the issue in detail -
http://forum.xda-developers.com/showthread.php?t=2194325
Jtag. The only possible way out.
Sent from my GT-S5282 using xda premium
vishu_10d said:
Hi,
I also have similar kind of issue which is still not resolved.Long time back postem my problem regarding my samsung captivate phone, I tried all the solution provided my members of this community to fix my issue. But it is still not resolve.
Could you please look in to my thread, and advise me what could be the problem and how can I repair my phone ?
Below is link to my thread where I have mentioned the issue in detail -
http://forum.xda-developers.com/showthread.php?t=2194325
Click to expand...
Click to collapse
From what I've read in your thread, you had the i9000 image working, correct? If so, why not just roll with it?
All Captivate/i9000 rom works with the i9000 bootloader. Captivate GB Rom will need to get the 2.3.5 i9000 Music Player APK, but aside from that, it all works. AOSP roms like Cyanogenmod and Slimbean will work out of the box if you get the captivate version. To install them, you'll need a slight workaround though:
Flash a kernel with CWM.
From there, flash the Captivate Glitch Kernel V13. It only comes in .ZIP format, which is why you need a CWM kernel before hand
Flash CM7 to convert the partition table(IMPORTANT. Rom will not boot if you skip this step.)
Flash anything from here on. If it throw a status 7 about device not being SGH-i896/SGH-i897, etc..., flash the Glitch Kernel before attempting to flash the ROM. You do not need to flash CM7 again.
(I know other ROM should have converted the partition table, but in reality it doesn't. Since you're flashing from Glitch, a CM7/MIUI kernel, they assumes you already have the MTD partition layout, and only resize it instead of doing a full conversion. CM7 check the partition table regardless of which kernel you're flashing it from.)
As a plus, Deep Idle works only with the i9000 bootloader. You'll get sleep of death otherwise. If you want your ATT World Phone image back, you can flash the custom param.lfs and change it manually. This can only be done from Touchwiz ROM though.