Hi guys. I know this is my first post and thread, but I used Google and searched in this forum for hours and I can't find a solution.
My device is a SGM GT-S5570I, it had gingerbread 2.3.6.
It was rooted with a universal root I found at this forum.
Right after that, I downloaded this: cm_tass-galaxyics-10062012 from galaxyics.com, I think it's CyanogenMod for S5570 (NOT COMPATIBLE!)
I started in normal Recovery mode and updated from sd card that file.
The problem is that I did not make a recovery and I didn't install ClockWorKRecovery, and now the phone always boots in Recovery mode, popping up an error: Can't find /system.
I think I soft-bricked it, right? Is there a way to fix it without a recovery? ODIN does not detect it, I installed both a manual version of the drivers (installation shows an error during proccess) and Samsung Kies, and none of them makes the PC detect the device.
Also I found it impossible to find firmware for S5570I (I find lots of firmwares and stuff for S5570, but I'm sure it won't work.)
Another thing I'd like to say is that I watched lots of videos at youtube of galaxy mini's and they show a different image at the boot than mine, they have something like "Galaxy pop/plus" and mine just shows "Galaxy Mini GTS5570I".
I can provide more info if asked, just don't know what more to say.
Thank you for your time, and excuse me for my annoying English!
Restore to stock firmware .
Download the it from samfirmware and use odin3 v1.85
Sent from my GT-S5570I Samsung Galaxy Pop Minus (LOL) using xda
dbtvillanueva said:
Restore to stock firmware .
Download the it from samfirmware and use odin3 v1.85
Sent from my GT-S5570I Samsung Galaxy Pop Minus (LOL) using xda
Click to expand...
Click to collapse
+1 ....
Related
For about a week now my samsung galaxy tab p1000 keeps freezing on the samsung logo screen and every minute ore so vibrates very short.
No matter how long i wait it keeps like that . Ive tryed the reset from the recovery mode (powerbutton + volume up) but no luck. The tab is still on a stock fw 2.2 i believe. and no root or anything.
Im very new on the whole rom stuf so some help is needed on how to restore the tab. I havent flashed it or anithing. Also it gives a error like in the screenshot below:
You should flash your tab and install a new firmware that's the only solution
omr911 said:
You should flash your tab and install a new firmware that's the only solution
Click to expand...
Click to collapse
oke i figured that much yesterday, when reading some topics, but wich rom do i need to use?? because i dont know how to root the tab because it wont boot ore is rooting not a must?
dude... get the latest 2.3.3 firmware...
you may check www.samfirmware.com to see latest firmware for your deivce. If you are in ASIA region, look for JPI edition. Its good, fast and stable.
Use ODIN to flash, with REPARTITION ENABLE... once complete flashing, reboot, and repeat the FLASHING again... DO IT TWICE..., but REPARTITION ONCE only...
Do i have to fully boot between flashing, or after first flash straight to download mode?
Sent from my X10i using XDA App
to play safe, let it boot.. but you can skip the configuration and shutdown and go into download mode..
Oké gona try it when i get home
Sent from my X10i using XDA App
jhnschts said:
oke i figured that much yesterday, when reading some topics, but wich rom do i need to use?? because i dont know how to root the tab because it wont boot ore is rooting not a must?
Click to expand...
Click to collapse
You should watch the tutorial at YouTube before taking any step
Sent from my GT-P1000 using XDA App
thx for all the help. took me couple of hours but got it running again on andriod 2.3.3
MY P1000 JUST HANG ON GALAXY TAB LOGO, CANT CONNECT TO CWM BUT CAN GO TO DOWNLOAD MODE BUT I CANT CONNECT IT TO PC!!!
sirs,,, can you please help me please! I GOT A samung galaxy tab p1000 and its rooted and installed overcome rom, i restored my stocktrom coz id like to get some files \. then suddenly my p1000 just hang on galaxy tab logo!!! it wont access to cwm recovery but it can access download mode the problem is my computer dont recognize my device!! nid help please!!!
( the latest) i
Im at your same state. My tab hangs on samsung logo and lets me to download alone. I can help you with the drivers part. Im sure you have the Kies in your system. Just push the on button and connect your phone to the pc and run Kies. You have an option to troubleshoot which will update the drivers for your phone. This worked for me. For the rest of the part, there is a chap who is helping me on this forum and he advised me to go for stock ROM. Ill try that today after sufficiently charging up my phone.
I ve been searching for a while now and looks like this is common and nothing much to worry about. Ill keep you posted on what happened on my attempt to odin flash the stock ROM.
Hello friend, my tab is back and working fine now. Hope tried connecting kies to get your driver up for the tab. Once its up you can get to the download and flash stock rom using odin. This would bring your phobe back to life.
I am currently running on overcome experience rom. Its pretty good and they have great instructions on their site. Try that you should be all set.
Best of luck.
I have the exact same issue. I've been trying to flash a Euro 2.3.3 for the last 5 hours. Anything special you did before I create a new thread? I've done this a billion times on my old tab....I just got this one today off ebay.
copper7op said:
I have the exact same issue. I've been trying to flash a Euro 2.3.3 for the last 5 hours. Anything special you did before I create a new thread? I've done this a billion times on my old tab....I just got this one today off ebay.
Click to expand...
Click to collapse
Can you be more specific on the state of your G-Tab?
What firmware were you using before the problem occurs?
if you are updating from proyo, you will need to flash dbdata.rfs. For your reference you can follow these following steps (given you can access download mode).
http://forum.xda-developers.com/showpost.php?p=24908470&postcount=2
Thanks a lot
I had tried to install ICS but done something wrong and my tab wasn't working.
after that followed instructions given here and its working after selecting factory reset.
Now only problem i have is kies don't show my tab's firmware version. And i also wanted to know how to store backup taken at ICS update thanks in advance
---------- Post added at 06:24 PM ---------- Previous post was at 06:17 PM ----------
I had tried to install ICS but done something wrong and my tab wasn't working.
after that followed instructions given here( including flashing twice with partion uncheck for second) but tab was hanging at samsung logo and its working after selecting factory reset from recovery option.
Now only problem i have is kies don't show my tab's firmware version. And i also wanted to know how to store backup taken at ICS update thanks in advance
I doubt you will ever get Kies to work with custom ICS rom in your tab.
priyana said:
I doubt you will ever get Kies to work with custom ICS rom in your tab.
Click to expand...
Click to collapse
Hahaha.. you are still doubting? -- or should you have said you're sure?
who knows Samsung has catch up, then I will be caught out.
kurs2020 said:
MY P1000 JUST HANG ON GALAXY TAB LOGO, CANT CONNECT TO CWM BUT CAN GO TO DOWNLOAD MODE BUT I CANT CONNECT IT TO PC!!!
sirs,,, can you please help me please! I GOT A samung galaxy tab p1000 and its rooted and installed overcome rom, i restored my stocktrom coz id like to get some files \. then suddenly my p1000 just hang on galaxy tab logo!!! it wont access to cwm recovery but it can access download mode the problem is my computer dont recognize my device!! nid help please!!!
( the latest) i
Click to expand...
Click to collapse
Use the latest version of odin. Also go into download mode before connecting to pc. Plase thank me if you found this useful.
This is my first post, so hello to everyone, greetings from Croatia (excuse me for bad english).
My problem started yesterday. I tried to put custom modded rom (cyan), using cwm on sd card... I followed instruction made on this forum, but now I have nearly-dead cell.
Only what it can do is to goin' to download (Odin) mode... Firstly could go into recovery mode, but now it's not possible.
I tried restore it with Odin M. and One click, I'm still trying, every possible solution... but nothing.
And I have troubles with Odin 4.xx (Multi Downloader, 4.38/4.42 which are made for OPS for Galaxy mini), it can't recognize my cell (port mapping is blank, no matter what I do) but version Odin3 (1.xx) can recognize, unfornatelly it is not made for Galaxy mini, and can't write (write error)...
I tried almost everything on my 3 PCs, even on new, fresh installed Wins...
my second mobile (''overclocked'' Iphone 3g) is older, but so much better...
Please help me. Thnx
You can lock this thread.
I founded on Galaxy Y section how to unbrick GT-S 5570 I (Odin3 1.84 + pit and Italian stock 5570I firmware, works flawless!! - thnx to authors!!)
Cheers!
Damir78 said:
This is my first post, so hello to everyone, greetings from Croatia (excuse me for bad english).
My problem started yesterday. I tried to put custom modded rom (cyan), using cwm on sd card... I followed instruction made on this forum, but now I have nearly-dead cell.
Only what it can do is to goin' to download (Odin) mode... Firstly could go into recovery mode, but now it's not possible.
I tried restore it with Odin M. and One click, I'm still trying, every possible solution... but nothing.
And I have troubles with Odin 4.xx (Multi Downloader, 4.38/4.42 which are made for OPS for Galaxy mini), it can't recognize my cell (port mapping is blank, no matter what I do) but version Odin3 (1.xx) can recognize, unfornatelly it is not made for Galaxy mini, and can't write (write error)...
I tried almost everything on my 3 PCs, even on new, fresh installed Wins...
my second mobile (''overclocked'' Iphone 3g) is older, but so much better...
Please help me. Thnx
Click to expand...
Click to collapse
you can try the following:
remove battery
press download mode combo without the battery and then put the battery(still pressing download mode combo)
flash gingerbread using Odin(download kies and usb driver)Note: close kies its not necessary
i was trying to unlock the phone because i could not use my sim card.and now i cant turn in on.it don't go in download mode or anything other(the screen is always black) but luckily
the odin program recognize it but it always stuck on setup connection.what must i do???i've tried everything.
markoskag25 said:
i was trying to unlock the phone because i could not use my sim card.and now i cant turn in on.it don't go in download mode or anything other(the screen is always black) but luckily
the odin program recognize it but it always stuck on setup connection.what must i do???i've tried everything.
Click to expand...
Click to collapse
it used andoid 2.3.3
unbrick galaxy ace
hey markoskag25,
i had the nearly the same issue (stuck on setupconnection),
i first try with a rom containing 4 files (pda, csc, etc..) didnt work. then tried with a single file rom (one file gignerbread ) n then it worked, using odin 4.38 .
pakeejy said:
hey markoskag25,
i had the nearly the same issue (stuck on setupconnection),
i first try with a rom containing 4 files (pda, csc, etc..) didnt work. then tried with a single file rom (one file gignerbread ) n then it worked, using odin 4.38 .
Click to expand...
Click to collapse
can you send me the files of what i must done?im a noob in android mobiles
pakeejy said:
hey markoskag25,
i had the nearly the same issue (stuck on setupconnection),
i first try with a rom containing 4 files (pda, csc, etc..) didnt work. then tried with a single file rom (one file gignerbread ) n then it worked, using odin 4.38 .
Click to expand...
Click to collapse
it stuck again on setup connection
markoskag25 said:
i was trying to unlock the phone because i could not use my sim card.and now i cant turn in on.it don't go in download mode or anything other(the screen is always black) but luckily
the odin program recognize it but it always stuck on setup connection.what must i do???i've tried everything.
Click to expand...
Click to collapse
Goto Sammobile.com & register there choose the firmware according to your reigion.....then try to flash it via Odin....there are lots of videos in youtube about flashing ace via odin....
****It is moresafe to flash the firmware version which u had last
**** do at your own risk...im not responsible...:beer: the luck is still Odin recognize your phone!!!
*** use google & youtube for process!!
Sent from my GT-S5830 using xda app-developers app
Mayhem66 said:
Goto Sammobile.com & register there choose the firmware according to your reigion.....then try to flash it via Odin....there are lots of videos in youtube about flashing ace via odin....
****It is moresafe to flash the firmware version which u had last
**** do at your own risk...im not responsible...:beer: the luck is still Odin recognize your phone!!!
*** use google & youtube for process!!
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
i cant do it cause odin always stop an setup connection .:/ do you know what must i do???
Hi markoskag25!
Perhaps you could read this
"How to unbrick galaxy ace...WORKING 100%"
by pagadalachetan
You could also try doing your questions in Galaxy Ace S5830 Q&A
Good luck!
BajoPrimate said:
Hi markoskag25!
Perhaps you could read this
"How to unbrick galaxy ace...WORKING 100%"
by pagadalachetan
You could also try doing your questions in Galaxy Ace S5830 Q&A
Good luck!
Click to expand...
Click to collapse
thanks for the help but my phone cant boot in any mode :/
markoskag25 said:
thanks for the help but my phone cant boot in any mode :/
Click to expand...
Click to collapse
Hi markoskag25!
Prehaps in How to unbrick Samsung Galaxy Ace by SuperMini
you could find more possible solutions: removing the battery and putting again before odin... , with an usb jig ...
Anyway, good luck.
BajoPrimate said:
Hi markoskag25!
Prehaps in How to unbrick Samsung Galaxy Ace by SuperMini
you could find more possible solutions: removing the battery and putting again before odin... , with an usb jig ...
Anyway, good luck.
Click to expand...
Click to collapse
the usb jig dont work..:/
markoskag25 said:
the usb jig dont work..:/
Click to expand...
Click to collapse
MY phone is also in the same state now,
what did you do to make it work,
my phone got detected but hangs at setup connection in odin and no answer from phone in z3x,
please advice me on this,
thank you.
Hello,
I have installed this "ibtimes . co . uk / articles / 419836 / 20130102 / android421-jellybean-cm101-custom-rom-samsung-galaxy . htm" rom on my (actually my mom's) galaxy ace S5830 and it worked just fine. Before i installed it i made a CWM recovery backup. I wasn't happy with the rom so i wanted to go back to my last one by restoring the backup. first i wiped data and cache and then restored the backup. But now when i tried to reboot the system it got stuck on the Samsung logo and later on it was just a light blue screen. can someone help me please.
Don't worry, you need to flash a stock ROM via Odin. Look at the stickies
Sent from my pet- Megatron™
Chill your phone can be fixed easily
Simple Bro , Download the firmware files from sammobile.com then Google for Galaxy Ace Odin ..I guess the version is 4.38 or something like that ..and make sure you download the cooper file with it then flash the original firmware using Odin.So then your phone is back to how it was when you bought it.
I hope this was helpful.
If you want the instructions on how to do this ..let me know ..I'll give you the link for the files also
Help!
I'm having the same problem.
I tried to install a new rom on my Samsung Galaxy GT-S5830, but when it was supposed to boot, nothing happend.
I tried to install the original firmware using Odin, but the problem is that I can't connect my phone to my computer.
The only thing my phone is able to do now, is showing the charging screen, opening the samsung recovery mode and accessing the download mode.
I really hope that someone could help me!
Thanks in advance.
PS:
My provider is Vodafone (don't know if it's important)
BscorpionII said:
I'm having the same problem.
I tried to install a new rom on my Samsung Galaxy GT-S5830, but when it was supposed to boot, nothing happend.
I tried to install the original firmware using Odin, but the problem is that I can't connect my phone to my computer.
The only thing my phone is able to do now, is showing the charging screen, opening the samsung recovery mode and accessing the download mode.
I really hope that someone could help me!
Thanks in advance.
PS:
My provider is Vodafone (don't know if it's important)
Click to expand...
Click to collapse
Dude! Switch off the phone. Then press the 3key combo to go to Download mode. U don't need to go to recovery either (which is a 2key combo). & ops name should be:-
COOPER_v1.0.ops
Sent Via XDA™ Premium
BscorpionII said:
I'm having the same problem.
I tried to install a new rom on my Samsung Galaxy GT-S5830, but when it was supposed to boot, nothing happend.
I tried to install the original firmware using Odin, but the problem is that I can't connect my phone to my computer.
The only thing my phone is able to do now, is showing the charging screen, opening the samsung recovery mode and accessing the download mode.
I really hope that someone could help me!
Thanks in advance.
PS:
My provider is Vodafone (don't know if it's important)
Click to expand...
Click to collapse
Hi BscorpionII!
As you can open recovery, if you don't have CWM 5.0.2.6 you could install it from your recovery and then try installing another ROM from CWM 5.0.2.6.
You could read this link
"Nielli's [GUIDE] Guides and Tips How to Root SGA, Install CWM5 and install Mods + Downloads"
In the link you'll find the last stable recovery -version 5.0.2.6- and much more.
Good luck.
I just tried flashing "B7510" firmware for galaxy pro to my galaxy mini using Odin...
After this...
My phone give me only white screen.:crying:
I hear samsung start music...
Then I connect the phone to my computer... It is detect it as Samsung Galaxy Pro.:crying:
I tried to enter to download mode but.. I can't. And odin isn't detect it.
Please help me
Sorry to my english.
NO any one can help me
مرحبا علي خليل
Get it to Samsung service
Sent from my GT-S5570 using xda premium
Do you flash other phone ROM to Galaxy Mini ?
If yes, then give it to Samsung. You're hopeless.
Did you try Samsung Galaxy Pro usb drivers and odin.
One does not simply flash Galaxy Pro firmware onto Galaxy Mini.
These kinds of firmware are not like ROMs. ROMs can be flashed on similar devices; firmware is device-specific.
One last-ditch method to get into download mode is this:
1.Take out everything in your phone (battery, SIM card, SD card)
2.Hold download mode button combination
3. Insert battery (get someone to help you) and hope that download mode appears
4. Plug it into your computer (preferably with the correct version of Odin and Galaxy MINI drivers and firmware)
5. Flash as per normal
6. Hope it works
The other way is to use USB jig, which I frankly have no idea how to use.
Sent from my CM7 GT-S5570I
Sry, wrong post.