Database Develop

Stuck after bad rom flash, odin wont recognize

So heres the synopsis on what my issue is:
first of all-
phone: Samsung Captivate build 1010
current OS: (botched install of Darky 8)
problem: no recovery menu capability, stuck in reboot loop (will not go past ATT Logo), can go into download mode but odin does not see the phone
I botched a Darky 8 install. I attempted to install the rom to my captivate via rom manager but to no avail. I then decided to give the install a try via clockwork and had luck. the rom was not to my liking so I went to mount the internal sd and proceeded to delete all files internally to make a fresh odin install possible (as I always do). It was at the time of restarting my phone that I realized the rom I install was accidently the I9000 rom on my captivate, thus forth being a possible source of my issue. Currently I have a phone that is stuck in a reboot loop any time I plug it into a power source, or attempt to power it on. While in said loop the phone will not go past the ATT logo, and as it cycles, at the I9000 screen a robot voice pops up saying restore system. Ive attempted to reflash back to stock with the stock captivate odin3 OCD, but I am having no luck with the phone being recognized by odin (run as admin). I am currently running Mac OSX 10.6 with windows vista on Virtual Box 4.0, and have had luck previously with flashing the phone back to stock after I decided to try new versions of cognition. Currently my phone can only go into download mode and not recovery due to the boot loop. please help asap, this my only means of communication with my family on the other side of the states

Try multiple USB ports/different computers if possible. I had a similar issue after flashing an i9000 rom. I could get into recovery but the power button wouldn't work for selections and in download mode my computer wouldn't recognize it. I just kept at it and eventually it worked.

CB650 Wolf said:
Try multiple USB ports/different computers if possible. I had a similar issue after flashing an i9000 rom. I could get into recovery but the power button wouldn't work for selections and in download mode my computer wouldn't recognize it. I just kept at it and eventually it worked.
Click to expand...
Click to collapse
going to try, redoing my virtual box in hopes that it was something stupid, and also trying the other usb port on my macbook.

Have you tried using a different cable? I had the same issue with a bad flash and Odin would not pick up my phone. If it did, it would nit complete the flash back to stock. I switched cables and it worked fine.
Sent from my SGH-I897 using XDA App

butchatbg said:
Have you tried using a different cable? I had the same issue with a bad flash and Odin would not pick up my phone. If it did, it would nit complete the flash back to stock. I switched cables and it worked fine.
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
cable is fine considering I am still able to bring up the gadget serial on my virtual box with the phone.

s0n1cm0nk3y said:
cable is fine considering I am still able to bring up the gadget serial on my virtual box with the phone.
Click to expand...
Click to collapse
Try using ADB..

Edit...misread

rickysa2000 said:
Try using ADB..
Click to expand...
Click to collapse
sadly I wished that work, I tried using adb reboot recovery, and in the attempt, the phone was not able to be detected. Should this be done in hopes to catch it at the right time in the boot loop or in download mode. Ive tried both.

So can you still get into Download mode? If so I would suggest finding another computer to use. For some reason, last week, my PC that I have been using to flash for months decided not to recognize my phone in download mode.
So I switched to my laptop, loaded the ROM. I tried reinstalling drivers and all kinds of stuff but nothing worked. I backed up my PC and re-imaged it and it's working again.

Another person on here had to go and manually remove all references to the USB Driver and re-install it.
I would say just try re-installing (with the phone in DL Mode) the USB drivers with the phone plugged in and see what happens then. Hopefully the OS will detect the phone and you should be golden.
And that mechanical voice is voodoo... need to be careful what folders your deleting even if you are going to flash ODIN.

avgjoegeek said:
Another person on here had to go and manually remove all references to the USB Driver and re-install it.
I would say just try re-installing (with the phone in DL Mode) the USB drivers with the phone plugged in and see what happens then. Hopefully the OS will detect the phone and you should be golden.
And that mechanical voice is voodoo... need to be careful what folders your deleting even if you are going to flash ODIN.
Click to expand...
Click to collapse
Odd I was told your perfectly fine to do so, and then from there do an odin flash. Ive done it before, but oddly enough I think what screwed me was because I did it during while in the rom, vs while in 2.1. I just wanted to try to get a clean slate. doing the master clear code from samsung never really deletes the left overs from say clockwork and such on my internal sd.

problem was the virtual machine, plugged it into a friends computer and all was done within a couple of mins. leave it to emulation falling short :/

[Q] Captivate on Life Support, XDA docs please help!

I was going to install a new rom on my captivate (which was running AXURA).
I back up user apps with Titanium Backup, then I go into recovery mode to revert back to stock. There was only 1 nandroid backup in the console, and that was from the date I flashed Axura, so I thought it was a stock rom. I flashed to that, but when I rebooted the phone, I still had AXURA but without any of my apps or customizations. In addition, the haptic feedback vibrates constantly without anyway to stop it, and error messages keep popping up on the screen that give me the option to "force close" or "wait"
I went back into recovery and deleted all user data hoping that this would wipe the Axura but instead I still have the same error ridden Axura build now without keyboard! Also unable to do BT file transfers (I tried to put the new custom rom on through a BT transfer but to no avail).
I tried the four steps here http://samsungcaptivate.wikia.com/wiki/Putting_the_Phone_into_Download_Mode and still havent been able to get it into download mode so that I could use ODIN to fix the issue.
None of the computers I plug the captivate into recognize it (windows or mac). I have installed the drivers on one of the windows machines and it didnt recognize. the other windows box no drivers were installed but it still said nothing. The phone also said nothing even with USB debugging enabled it would not say anything indicative of a USB being connected rather it would respond like I had connected a charger (just the alert noise and charging graphic in menu bar)
I dont know what to do here...I want to get axura off my phone and get a working rom installed. At the very least I want a way to get a rom onto the internal SD or to have the computer recognize the device. What do I do?! I appreciate all help in advance.
-Dan

You have ROM X with Kernel Y.
What color is the recovery mode text that you're booting into (red or green).

MikeyMike01 said:
You have ROM X with Kernel Y.
What color is the recovery mode text that you're booting into (red or green).
Click to expand...
Click to collapse
Yo Im a friend of his, his recovery is the stock samsung blue recovery
What he is trying to do is place the clockworkmod update.zip on the root of the internal sdcard but he can't get into download mode
Or
Flash using Odin

I am not too familar with samsung phone, I have a Droid X. Is there anyway to access the external sdcard instead of the internal?

**Update
So he still had the clockworkmod update.zip in on the root of the internal sdcard
he is able to get back into clockworkmod but the backup when restore, boots up with force close errors and he cant connect to the computer when booted and for some reason he cant get into download mode.
Is there anyway to access adb through the clockworkmod recovery?

masInvasion said:
**Update
So he still had the clockworkmod update.zip in on the root of the internal sdcard
he is able to get back into clockworkmod but the backup when restore, boots up with force close errors and he cant connect to the computer when booted and for some reason he cant get into download mode.
Is there anyway to access adb through the clockworkmod recovery?
Click to expand...
Click to collapse
If his computer wont see it then ADB wont do you any good as it will tell you there is no device found. Looks like a jig maybe in his future. Should have used odin to return to stock instead of a backup file.

zelendel said:
If his computer wont see it then ADB wont do you any good as it will tell you there is no device found. Looks like a jig maybe in his future. Should have used odin to return to stock instead of a backup file.
Click to expand...
Click to collapse
So he reinstalled the axura zip file(which is what the nandroid backup was of) and it gave him a error on line 10 or something. he rebooted and the force close messages are gone and his phone works but his computer still doesn't recognize it!
Any Suggestions?

What happens when you plug the usb in? On phone and pc

Has he tried other usb ports or another computer?
I sympathize because I flashed p10.2 from p4. Tried to flash the update zip instead of doing Odin to stock. Scared me and I learned my lesson. Do it the right way the first time. Shortcuts can lead to problems.
Sent from my SGH-I897 using XDA App

[Q] htc hero soft bricked can't boot out of recovery. HELP!

I bricked my hero trying to flash gingerbread. Either because i didn't flash a kernel or i might have overlooked something i should've read. But my phone bricked. Long story but i ended up having to put my sdcard in a friends phone and formatting it, then downloaded something i found on G1 forum and dropped it on my sdcard (not smart i know). Then i took my sdcard out of his phone with that file on it and put it back in mine. Whatever that file was allowed me to now be able to boot into my recovery again/HBOOT&Fastboot. But i CANNOT boot past recovery. I didn't have a nandroid backup anymore since i formatted so i grabbed a 2.1 ROM off of here, something stable, and figured i could drop it on the sdcard and flash it. but nothing. Either it's not completely flashing the ROM, or sometimes it aborts it. So i tried a cm6 ROM. Same thing. It won't flash ANYTHING. Could my recovery have gotten damaged when i formatted my sdcard? i'm using clockworkmods 2.5. I'm on a mac that i recently had to factory reset. i downloaded sdk last night to try to manually install a different recovery. but i can't use htc sync since it's for pc. so i found a another program that will replace htc sync, but i still can't sync because i have to enable usb debugging for it to sync to my phone. and i don't know how to enable usb debugging from recovery. It has blown my mind. i have no idea what to try anynore. If anyone can help out at ALL. please do.

Try going into recovery and going into the partitions menu.
Inside that menu, format the system before you flash another ROM.
Factory reset skips over the /system file.
Try that and let me know what happens.
(I'm assuming you dont have data or anything since you factory resetted)
I guess. Disclaimer: this deletes data

hmm.
Okay so i booted into recovery.
Did a full wipe even though there isn't anything to wipe.
Then formatted the system.
Then installed zip.
Then Reboot system now.
I gave it 15 minutes just to be sure, and it never left the boot logo.
Again like i said it isn't completely flashing the ROM.
It unzips it and gets to where it says "installing package"
and just stops.
From the time i select the zip file that i want to flash, till the time that it says it's done, takes maybe 5 seconds.
That's why i thinking it's my recovery. It might be damaged or something.
If there was a way to enable usb debugging from clockworks recovery then i could manually install a different recovery. butt... i'm getting no where.

Get to a PC 1st and foremost. Go to the HTC website and download the RUU stock. Nevermind about adk and USB yet. You need to be back to stock to have a clean backup again. Once you have downloaded the stock rom be patient and charge the phone beforehand. Hopefully this gets you to stock again. Google Z4root, download and place in the root of the SD. In the market get an apk installer an install Z4. After run Z4 for root. Download and install clockwork after that and make sure you flash the recovery at the top before backing up. Then after that try installing 2.3 but let me know which rom you are trying to use. The one I have needed an different version of clockwork so read carefully. Hope this helps.
mmm a Gingerbread SuperHero....

Also redownload the rom. Could be a bad download.
mmm a Gingerbread SuperHero....

okay i'm going to try that. it's been so long since i've downloaded an RUU or Rooted. Can i flash the RUU like any other? will it be a zip file? Because back when i rooted and had to download the RUU before i could root, i think i installed it using htc sync. But my phone can only be recognized as a storage device. Since i cant enable debugging. I'll see what happens cause the only way i can think to get the stock ROM on there is to flash it. But seeings as how nothing else in the world is completely flashing i might stumble.

It's definitely not the ROMs i've tried like 5 or 6. Three of them being one's i've recently had on there. Oh and I didn't think there was but one Gingerbread ROM out for the hero. And was it the 3.0 clockworkmod? Cause that's what i skipped over thinking it was just extra, Since i had just updated my clockworkmod in ROM manager to 2.5

Wait if i go back to stock. isn't there a chance of loosing root forever?

KarrmaBeats said:
Wait if i go back to stock. isn't there a chance of loosing root forever?
Click to expand...
Click to collapse
No, you just reroot..

KarrmaBeats said:
Wait if i go back to stock. isn't there a chance of loosing root forever?
Click to expand...
Click to collapse
I "Had" a Similar Problem...
What worked for me was 1 of the 2?
Because I did Both Steps, I'm not really sure what actually fixed it, but all I cared about was it being fixed! With that said, try this!!
1st thing I did was Reflash the Radio, 2.42.02.10.29.zip
2nd thing I did was Wipe Everything, then Flash a New Kernel "I Used Deca's #43" If that Doesn't Work Try DecaFuct #589!
Hope this Helps!
Sent from my HERO200 using XDA App

Okay i'll try that! Because i can't even go back to stock since i can't sync with any computer. Because i can't enable usb debugging. Unless there is a way to flash a stock RUU.. i even tried different things in fastboot but it didn't work apparently because of usb debugging. (that's what someone else said). But I will try that and I'll let you know how it goes!

That didn't work either.

Are you using Windows XP to get all this done? I would try finding a PC that has Vista. Or try another PC all together. IDK, just a thought, give it shot, you don't have anything to lose. I wish you luck my friend.

You definitely need the 3.whatever clockwork flash that goes with the gingerbread that's posted here. Clockwork turns orange once its done right. Also don't use setcpu. Adw fc's a lot with it. But that's for later info. For now..
If your able to get into recovery you can save yourself. Rooting again is very one click simple with Z4 in my first post. You need a stock rom to save yourself now though. GET TO A WINDOWS COMPUTER at least with Vista but works great with 7.
............. mmm a Gingerbread 2.3 SuperHero....

Don't forget to WIPE! VERY IMPORTANT
mmm a Gingerbread SuperHero....

MattCrystal said:
Don't forget to WIPE! VERY IMPORTANT
mmm a Gingerbread SuperHero....
Click to expand...
Click to collapse
LOL I still tell my 18 yo boy that everyday.

lmao! Damn kids
Best bet is to get to a Windows computer, preferably Windows 7. Plug it by USB and you need to get the drivers working for Sync to work at all and get USB debugging back on your phone. Leave the phone off before plugging it in. Plug it in and if the amber light comes on, if so turn on the phone and windows should give a USB notification and try to install drivers. This needs to happen if you want to get back to stock. And you do want back to stock to backup to in case you ever need to take it back to Sprint. They will flag your phone/account so you can't take it anywhere if you show them it's been rooted or custom rom anything. Z4 will also let you unroot the phone to do this.
If all else, I'd try flashing a different rom all together REMEMBER TO WIPE 1ST! then flash the rom. Maybe this will get it to fully install and enable usb, which the 1st thing I'd do when you get going again is get back to stock, root, and backup right away. Hopefully something works for you but let us know please. I'm pretty intrested in how this turns out for you and maybe can help others in this type of case.

Guys please read what all i've said before posting. I'm not completely stupid. i've tried flashing more than just one rom. i tried flashing about 6 roms, a radio, an two different kernels. Nothing flashes. no yellow progress bar... i have a bad recovery. And i can't go back to stock or manually install a new recovery or anything that includes htc sync because i can't enable usb debugging.. i've tried on a windows 7 computer, and have htc sync on it.
If you cant flash anything in recovery, nor can you enable usb debugging. (to convert to stock, or fastboot intalling, or manual intalling, adb, ect... ) then what am i supposed to do?
I think i'm the first person in the world to have this problem on a hero.

MattCrystal said:
lmao! Damn kids
Best bet is to get to a Windows computer, preferably Windows 7. Plug it by USB and you need to get the drivers working for Sync to work at all and get USB debugging back on your phone. Leave the phone off before plugging it in. Plug it in and if the amber light comes on, if so turn on the phone and windows should give a USB notification and try to install drivers. This needs to happen if you want to get back to stock. And you do want back to stock to backup to in case you ever need to take it back to Sprint. They will flag your phone/account so you can't take it anywhere if you show them it's been rooted or custom rom anything. Z4 will also let you unroot the phone to do this.
If all else, I'd try flashing a different rom all together REMEMBER TO WIPE 1ST! then flash the rom. Maybe this will get it to fully install and enable usb, which the 1st thing I'd do when you get going again is get back to stock, root, and backup right away. Hopefully something works for you but let us know please. I'm pretty intrested in how this turns out for you and maybe can help others in this type of case.
Click to expand...
Click to collapse
haha if you turn it on while it's plugged in, it goes into fastboot usb. Which i tried running commands but like i said.. there's no way to enable debugging so i get "device not found" in return on cmd.

Hey Karrma, go to this post and try this. http://forum.xda-developers.com/showthread.php?p=8551240&highlight=hercimg.zip#post8551240
It worked for me after I borked my hero and couldn't do anything but fastboot.
Hope it works for you.

Restoring the Streak 7 using NVFlash

Restoring the Streak 7 using NVFlash
This will bring your device back to the unrooted 2.2.2 stock ROM. This has only been tested by the OP (me) on a T-Mobile 4G version. If you use this on other models, I cannot guarantee it's usefulness.
(Windows Only Instructions) If you’re a Linux user, you should be able to 'translate' this yourself.
This is for those who cannot use fastboot or adb. If you can successfully use these tools, DO NOT use NVFlash. You will lose all your data on your device. Do not proceed with these instructions if you are not expecting to lose all personal data on the device.
Step 1) APX Drivers – To work in NVFlash mode you need to install the drivers for the nvidia boot-recovery device. Power off your device and disconnect it from the computer. Hold down the Volume up & down buttons while plugging in the USB cable. (Or leave the USB cable attached and hold the pinhole ‘power off’, hold down the volume Up & Down and release the pinhole ‘power off’.) (The volume button seems like a rocker switch, but you can hold down both sides at once)
Your computer should now recognize the Streak 7 as an APX device. Manually install it using the nvidia boot-recovery drivers.
NVFlash
http://www.4shared.com/file/SewzEdtV/nvflash.html
Nvidia Boot-Recovery Drivers
http://www.4shared.com/file/-utyTYcJ/usbNvidiaBootdriver.html
Step 2) Install NVFlash. For ease of function simply create a folder on your C:\ drive called ‘nvflash’. Download the nvflash zip and extract it to the nvflash folder.
Step 3) Download the 13 img files that make up the original partitions of the device. Files p2.img through p14.img. Put these files in the C:\nvflash folder. ***You can skip the 14.img file (Don't put it in the NVFlash folder) if you want to attempt to keep your original internal SD Card data, but again, no guarantees.
IMG File Mirrors:
(.zipx file containing P2 through P22 - 387 MB)
Hotfile:
http://hotfile.com/dl/120032619/5858...7Img.zipx.html
DepositFiles:
http://depositfiles.com/files/8zkfcfkhh
FileSonic:
http://www.filesonic.com/file/114412...treak7Img.zipx
Original System File Mirrors:
(.zipx file containing Boot, System, Recovery and Animation - 125 MB)
Hotfile:
http://hotfile.com/dl/120032773/df86...stem.zipx.html
DepositFiles:
http://depositfiles.com/files/u9s1drd9j
FileSonic:
http://www.filesonic.com/file/114412...rigSystem.zipx
Alternate source:
Img files
http://www.4shared.com/file/R-Zl7jSj/p2_online.html
http://www.4shared.com/file/iR-8FbSp/p3_online.html
http://www.4shared.com/file/rBpYOv5r/p4_online.html
http://www.4shared.com/file/fYTvjnck/p5_online.html
http://www.4shared.com/file/mWE-yz8n/p6_online.html
http://www.4shared.com/file/PCRtISra/p7_online.html
http://www.4shared.com/file/hhjX5hj2/p8_online.html
http://www.4shared.com/file/IK8GXafe/p9_online.html
http://www.4shared.com/file/r5dQ9vhx/p10.html
http://www.4shared.com/file/yaMPAoxE/p11.html
http://www.4shared.com/file/gtjvMcsH/p12.html
http://www.4shared.com/file/jZKIWx1Z/p13.html
http://www.4shared.com/file/nnELROLc/p14.html
http://www.4shared.com/file/LLFPuE0C/p16.html
http://www.4shared.com/file/pDw8TwjJ/p18.html
http://www.4shared.com/file/TxL33jOv/p19.html
http://www.4shared.com/file/oiZevyl9/p20.html
http://www.4shared.com/file/9WizbDai/p21.html
http://www.4shared.com/file/fairIFEW/p22.html
Step 4) Launch (double-click) the Restore.bat file from the C:\nvflash folder. This batch command will begin copying the partitions to the device. Wait patiently as your device is being restored.
Step 5) Once all of the partitions have been written, use the pinhole ‘power off’ button next to the SD card to power off the device. Now power it back on normally to enjoy your restored Streak 7.
If you have trouble with any of the links or corrupted files, please pm me or reply to this thread.
That's all I can do folks. Ran out of free space on my free storage site.
*** Update *** If you are still stuck at boot logo, check to see if you can get into fastboot mode, if so,
finish restoring with the fastboot method.
************* Also, I recently used this method to restore from Honeycomb. I too was again stuck at the Dell logo. However, I was able to use the recovery menu (Vol Up + Power) and do a factory reset and was fine from there.
Original System Files
Boot
System
Recovery
T-Mobile Boot Animation

There may still be an issue with some units restarting as if no files had been written. If this is your experience, please let me know and I will start a new thread for that issue. Good luck!

illdill said:
There may still be an issue with some units restarting as if no files had been written. If this is your experience, please let me know and I will start a new thread for that issue. Good luck!
Click to expand...
Click to collapse
link for img 14 isnt working

graffixnyc said:
link for img 14 isnt working
Click to expand...
Click to collapse
Figured it might fail. Its the biggest one and it dropped a few times in the transfer. Will give a heads up when it is available. Might not be till the morning.

I was able to restore my boot and recovery partitions using the files you have already provided. Thanks for the excellent work. I am now using Clockwork to finish the job for the system recovey.

Thank you so much for sharing.
Downloaded files and waiting for p14.

im having trouble downloading p11 also. tried flashing all but p11, but nothing has changed!?!? thanks for sharing
edit: did finally get p11 to download, tried again, still no change. everything said it went fine on nvflash, but streak 7 still stuck in apx mode?

So- I have gone from a corrupted system that would boot with no fastboot or recovery mode into an operating environment that was unusable due to repeated force closures. Now thanks to these files I have been able to restore my system and finally apply Steve's 2.2.2 rooted with clockwork. Thanks to Illdill, Steve and everyone on the forum!

jesus2282 said:
im having trouble downloading p11 also. tried flashing all but p11, but nothing has changed!?!? thanks for sharing
Click to expand...
Click to collapse
You will need the p11 for a successful restore. p14 may not be required as some have had success without it. Keep trying for the p11 file. It may be an issue with the online storage site I chose, or if you could use a download manager, that may help.

graffixnyc said:
link for img 14 isnt working
Click to expand...
Click to collapse
Give it a try without p14 and let me know what you get?

jesus2282 said:
im having trouble downloading p11 also. tried flashing all but p11, but nothing has changed!?!? thanks for sharing
edit: did finally get p11 to download, tried again, still no change. everything said it went fine on nvflash, but streak 7 still stuck in apx mode?
Click to expand...
Click to collapse
What happens when you use the pinhole to power it off then attempt to power it on normaly?
Also, are you using the flash.cfg, flash.bct, fastboot.bin and bootloader.bin from the nvflash.zip I provided?

tried 3 times, seem still cant get pass the boot screen. question, when i press up + down and plug in the usb, nothing happen but the buttons lights up... then i clicked restore and it runs all 12 files.... then i reboot.... still stuck at boot screen...

n0906 said:
tried 3 times, seem still cant get pass the boot screen. question, when i press up + down and plug in the usb, nothing happen but the buttons lights up... then i clicked restore and it runs all 12 files.... then i reboot.... still stuck at boot screen...
Click to expand...
Click to collapse
Yes, nvflash mode should only give you the back, menu and home lights. Screen will remain black.
Can you get into fastboot or recovery?

illdill said:
Yes, nvflash mode should only give you the back, menu and home lights. Screen will remain black.
Can you get into fastboot or recovery?
Click to expand...
Click to collapse
i can... so u saying i can have it fix if i can get into either?

n0906 said:
i can... so u saying i can have it fix if i can get into either?
Click to expand...
Click to collapse
Yes If you can get into fastboot you can flash the system, recovery and boot images.

illdill said:
Yes If you can get into fastboot you can flash the system, recovery and boot images.
Click to expand...
Click to collapse
AWESOME! but i tried look for those post and tried few weeks already.... no luck at all, i did follow every steps..... any post suggestion?

n0906 said:
AWESOME! but i tried look for those post and tried few weeks already.... no luck at all, i did follow every steps..... any post suggestion?
Click to expand...
Click to collapse
Try this thread
http://forum.xda-developers.com/showthread.php?t=938824

If anyone can provide an alternate download source for the p14 image please post here and I will add it to the how-to.
Thanks in advance.
Sent from my Dell Streak 7 using XDA Premium App

worked for me without p14 Thanks man! Although I have a replacement coming.. at least I can play with it, configure it the way I want again then back it up, then when the new one comes just restore it to that one

Oh and another thing.. everything on my internal sd card was still there! All the files that were there that I downloaded, my titanium backups, clockwork recovery back ups.. all of that was there

Pls help deleted official OS

Hi,
could you pleas help me. I was installing, wiping ROMs in safestrap and didnt pay attention and wipe stock ROM all the system everything. I can get to recovery mod but dont know what to do? Is it possilbe just download and install something in recovery?
Thank you

You actually have a couple options, I think.
If you have a physical microsd card and you can put it in your computer, you can put a zip on there and then flash it from safestrap. But that doesn't seem likely...
Thanks to sdshadow I have another idea. Hold both volume buttons when you turn the phone on. Then use you computer (run rsdlite or the Droid 4 utility) to flash an sbf file to your phone. Obviously this requires a data cable between your computer and phone.
I don't remember how it works, but I think you can transfer a zip from your computer to your phone using a data cable without booting an OS (using adb, I think).
Hopefully this helps or someone else can give you clearer instructions. I'll do a little more research if I need to.

theprogramguy said:
You actually have a couple options, I think.
If you have a physical microsd card and you can put it in your computer, you can put a zip on there and then flash it from safestrap. But that doesn't seem likely...
Thanks to sdshadow I have another idea. Hold both volume buttons when you turn the phone on. Then use you computer (run rsdlite or the Droid 4 utility) to flash an sbf file to your phone. Obviously this requires a data cable between your computer and phone.
I don't remember how it works, but I think you can transfer a zip from your computer to your phone using a data cable without booting an OS (using adb, I think).
Hopefully this helps or someone else can give you clearer instructions. I'll do a little more research if I need to.
Click to expand...
Click to collapse
thank you for answer. Trying to fix it fast before batter died. SD card I can use but dont know how to use safestrap because the safestrap doesnt come up. I can only go to recovery or fastboot but the option 2 is problem that RSD doesnt seen my device. its connect but I cant only unzip files in rsd but no flash it :/

I should still have installed CM 10.2 on rom 1 in safestrap but I dont know how to open safestrap. Because I wipe stock rom the stock rom I have still active and reboot device :/

Ah, I got recovery and SafeStrap mixed up. I have reached the end of my small knowledge.

tofmik said:
I should still have installed CM 10.2 on rom 1 in safestrap but I dont know how to open safestrap. Because I wipe stock rom the stock rom I have still active and reboot device :/
Click to expand...
Click to collapse
try Boot Mode Selection Menu> Scroll down with volume down button, to BP Tools, Select with Volume UP button, may boot directly to SafeStrap.
if that does not work
may need to re-install drivers or at least look in window device manager to see if it is listed correctly
see my drivers errors
if drivers are correct, RSD lite/Droid 4 utility should see Droid 4.

The phone si ok.
Thank you very much for help!