My HD7 charged fine before but I installed HSPL and flashed Deepshining and everything worked fine. The problem is that the phone doesn't charge via usb or ac outlet. I know the charger/cable is fine because my Vibrant charges fine.
I don't think that the port is an issue because when I boot into HSPL it lets me reflash Deepshining (which I've done twice and I'm still having the issue).Whit Nextgen the same problem. I dont' know why.
I flashed a stock rom and the charging work
Sorry for my Bad English.
Your battery is probably tired...but keep in mind that after flashing a custom rom sometimes the charging process is unstable during one or two days. It happened to me too, nothing that time can't fix.
NebZoNe said:
Your battery is probably tired...but keep in mind that after flashing a custom rom sometimes the charging process is unstable during one or two days. It happened to me too, nothing that time can't fix.
Click to expand...
Click to collapse
Thanks, will try to follow your advice.
Related
Hi guys!
Tried to flash the phone with WM6 rom via RUU - didnt work, so i took a ShellTool and tried with this one - and now its the best part:
its teeling it can take more than 15mins but i took more than 1 hour - nothing happened, so i disconnected the phone a hard reset it.
OMG its telling OS 4.0.0.0 and wont boot so i took MrClean 2.24 rom pout the phone in bootloader mode with camera+reset and succesfully flashed it to MrClean.(now i think Im a god)
but after succesfull booting it satrted customizing and reset itself... from now on its copletely dead, no response
do you guys have had something like this or maybe some of you know what happened
My device is G4
thx in advace, cheers
gutaker said:
Hi guys!
Tried to flash the phone with WM6 rom via RUU - didnt work, so i took a ShellTool and tried with this one - and now its the best part:
its teeling it can take more than 15mins but i took more than 1 hour - nothing happened, so i disconnected the phone a hard reset it.
OMG its telling OS 4.0.0.0 and wont boot so i took MrClean 2.24 rom pout the phone in bootloader mode with camera+reset and succesfully flashed it to MrClean.(now i think Im a god)
but after succesfull booting it satrted customizing and reset itself... from now on its copletely dead, no response
do you guys have had something like this or maybe some of you know what happened
My device is G4
thx in advace, cheers
Click to expand...
Click to collapse
Is the phone CID unlocked?
Did you use an RUU from same provider?
If none of these answers is affirmative then you better forget that phone. Only recovering via JTAG (requires tools, knowledge (which you can't find here) and skills) or by getting a new board.
Last chance may be a flat battery; try a new one or charge that in another phone.
cheers
Suprising that a RUU didn't brick your phone (or probably it did).
Try charging the battery?
thx for replies guys
no my phone is not cid unlocked and as far as i know none get cid unlocked g4
i used ruu 2.5.2 from xda ftp, so as you said probably my phone is bricked...
thank god (or someone else) there are friends of mine owning same phone so i can try with other batteries
the strange thing is that not ruu bricked it, i think the post flash customization is faullty...
will keep you up to date
just to inform you:
after few days (weeks) of laying inactively on my desk i managed to try once again to resurrect my brick...
assuming the battery is empty i connected my WIZ to a charger and surprise! it lighted the red led for about a second... now i'll wait a few hours and see whats gonna happen
btw: anyone of you guys had something like that in the past?
I tried to upgrade my 8125 using Shelltool earlier this week. I used the tool successfully before and so I was assuming that things would just go well.
Unfortunately, I ended up being stuck on the bootscreen. I can also still go into Bootloader mode and so I figured all I need to do is to download the Wizard Love ROM, go into Bootloader mode and apply the ROM to restore an older version. Well, for some reason the RUU utility keeps telling me about a communication issue even though I already disabled USB in Active Sync and I also killed the program using Task Manager...
What am I missing here? I am hoping that someone can enlighten me...
Thanks,
Jens
For some reason I was finally able to flash my 8125 with the Wizard Love ROM this morning. Flash completed and I was back to an old working ROM.
Unfortunately, when I flashed it with the latest CR86 it flashed fine, but then I am stuck on the Bootloader screen. Already tried it twice and just running it a third time, but I am puzzled...
Any help?
Thanks,
Jens
jstraten said:
For some reason I was finally able to flash my 8125 with the Wizard Love ROM this morning. Flash completed and I was back to an old working ROM.
Unfortunately, when I flashed it with the latest CR86 it flashed fine, but then I am stuck on the Bootloader screen. Already tried it twice and just running it a third time, but I am puzzled...
Any help?
Thanks,
Jens
Click to expand...
Click to collapse
its on its last flashes my friend(or maybe just tire of custom roms)
but just before mine died, it would do that, until i was stuck on the bootloader and the screen would just die, i would have to leave it off then turn on but the same, after that i just left it alone
i could not flash anything on it and i could not see it suffer anymore
i still have it but dont have time to bring it back to life, at least it blinks at me
That's what I was worried about...
Strange thing is I probably only flashed it about 10 times... Very frustrating!
Thanks for your reply!
Hmmm, I just tried the old Wizard Love ROM again and it worked right away.
What am I missing here? I am trying to get to the new CR85 6.5 ROM, but I always end up being stuck on the bootscreen loader. I mean it shows me the HTC screen, but then it goes straight to the bootscreen...
Any suggestions?
I am back in business!
It turned out that flashing back to an older ROM disabled my HardSPL. I guess a case of user error on my end...
Anyhow, I also experienced the fading display mentioned above and I think that's just a sign of a weakening battery. It seems that the phone doesn't charge fast enough over USB in Bootloader mode.
So, if you run into the same problems like me:
- Charge your phone using the charger when you are stuck in Bootloader mode for extended amount of times!!!
- Flash an old provider ROM or Wizard Love ROM
- Re-apply HardSPL if needed
- Upgrade to a newer ROM
Cheers,
Jens
hi all!
i got a big problem with my touch hd...
after flashing several roms, i flash since miri V20, my phone startet to hang very often. everything is working fine after flashing, but when i want to use opera via wifi for example it hangs - even the hardkeys aren't responding anymore. after a soft reset it shows the "smart mobility screen" and does nothing anymore, only after a hardreset the phone boots again. this behavior startet with flashing the 6.5.x ROMs i think, before that i had no problems. i'm using radio 1.17.25.09 and xannytech ROM evo 1.4 right now.
i flash via hspl and yes, i did a hardreset after every flash
any idea what i can do to get back a working phone?
thank you!
hm... have you done the HR after flashing - I mean really after flashing including the base-program installation. Try to install new rom fully, then HR.
Otherwise it does not look like the rom problem. Maybe ur wifi is broken?...
Then - have you combined good XIP, RIL and Radio? I read here in the forum a good combination is needed or the phone could hang sometimes...
(Generally - I do not want to scare you however I think it is really a HW problem)
yes, i did the hardreset every time directly after flashing the ROMs.
hmm, i think i try another radio and flash again, when it behaves still wired you could be right an its a HW problem -.-
the wifi works well when i update weather or download quickgps data, so i don't think its broken. i had this behavior even when i wanted to change my background wallpaper in the last xnor ROM...
its really strange Oo
you can also try to flah a stock rom firts and then do the normal flahing procedure of the rom you want
sometimes it is possible that the prvious rom leaves traces arround on youre phone that doesnt like the new rom and therefor it could hang
so try to flash a strock rom first and then the rom you want maybe it helps
best regards
miniterror
MjØlnir said:
hi all!
i got a big problem with my touch hd...
after flashing several roms, i flash since miri V20, my phone startet to hang very often. everything is working fine after flashing, but when i want to use opera via wifi for example it hangs - even the hardkeys aren't responding anymore. after a soft reset it shows the "smart mobility screen" and does nothing anymore, only after a hardreset the phone boots again. this behavior startet with flashing the 6.5.x ROMs i think, before that i had no problems. i'm using radio 1.17.25.09 and xannytech ROM evo 1.4 right now.
i flash via hspl and yes, i did a hardreset after every flash
any idea what i can do to get back a working phone?
thank you!
Click to expand...
Click to collapse
It has been known that if you constantly flash your HD, sometimes this can cause HD to hang/freeze etc. A method which seems to fix this is to return to stock rom, then use dummies guide to flash cooked rom again
thank you all guys!
i will flash back to stock ROM as mentioned and then flash my fav custom ROM.
i let you know if the problem is solved then.
thx again!
Hi to all , could we know finally what you did so make your phone work again ?
yes, I'm interested too.
I had similar problems, no matter what rom i tried i had freezes and hang ups, and strange behavior, and after flashing stock rom and then another rom smooooth sailing all the way since so i reckon its a good thing to do every fifth flash or so.
hi all!
think i solved my problem by flashing the latest stock ROM as advised by other users. after that i flashed my prefered custom ROM and now the device flies Oo respond time is much much better, no lags or hangups till now...
i'm happy again
greetings
hey guys, i have a problem with my x1 where it wouldnt start up. It would just go to the tri boot screen and once it does, it ask for an upgrade and then turns off by itself. It would only let me press the power key to upgrade, but once i do it resets and a red light would flash. I tried hard reseting it and syncing to get back to the original rom because i am using a custom rom. I been using this custom rom for many months and had no problem with it. please help guys
please and thank you in advance.
Did you make sure you had AT LEAST 50% battery power? To be safe, you might want to let your phone charge for awhile before attempting to power the phone back on and resuming your task.
phatboy1991 said:
hey guys, i have a problem with my x1 where it wouldnt start up. It would just go to the tri boot screen and once it does, it ask for an upgrade and then turns off by itself. It would only let me press the power key to upgrade, but once i do it resets and a red light would flash. I tried hard reseting it and syncing to get back to the original rom because i am using a custom rom. I been using this custom rom for many months and had no problem with it. please help guys
please and thank you in advance.
Click to expand...
Click to collapse
find any friend who has X1 charge battery full and than try to flash using Micro SD mthod.
on my X1 was problem like that but i flash
about 3 times there was same problem but when i try it again i was ok.
sorry for my bad english. hope u anderstand what i mean.
firs charge your battery full for safe your X1.
Im Packing said:
Did you make sure you had AT LEAST 50% battery power? To be safe, you might want to let your phone charge for awhile before attempting to power the phone back on and resuming your task.
Click to expand...
Click to collapse
i charged it over night, and it still didnt work. ill try it again to make sure. hope it works.
phatboy1991 said:
i charged it over night, and it still didnt work. ill try it again to make sure. hope it works.
Click to expand...
Click to collapse
You flashed rom via data link cable, Did't you?
If Battery empty while flashing rom, now you have a big problem.
You need MTTY to re-alive your X1.
Follow this forums ; How to resolve when has accident while updating ROM.
http://forum.xda-developers.com/showthread.php?t=371154
PS. Flash by using Micro SD method is the best.
chow-doii said:
You flashed rom via data link cable, Did't you?
If Battery empty while flashing rom, now you have a big problem.
You need MTTY to re-alive your X1.
Follow this forums ; How to resolve when has accident while updating ROM.
PS. Flash by using Micro SD method is the best.
Click to expand...
Click to collapse
thnx, i will try this as tomorrow when my x1 finish charging.
so i tried the MTTY and its not working. I did all the steps like closing the rapimgr.exe and wcescomm.exe, but the WCEUSBSH001 isnt showing up. I cant get my x1 to turn on when i want it to. it just starts up by itself and when it does it goes to the boot mode and saids KOVSING.nbh- and ask for an upgrade. Am i doing something wrong? please help
i usually put new Roms on my devise so this isn't new to me one day i was putting a new ROM on it and it said it completed successful but when i turned my phone on it was stuck in bootlader screen even when i loaded the ROM through the SD card pls help
Was it the same ROM every time? Einstein said that the definition of insanity was repeating the same thing over and over again and expecting a different result.
Try re-downloading the ROM, or flashing a different one.
i made sure to try out many things hears what i did i
tried using multiple roms
tried the stock rom
and now i think im just gonna leave it on bootlader screen till the baterry runs out and try again but i dought itll work i need a way to relod the botlader if that posible
Unless you have another way to recharge that battery, I wouldn't recommend letting it drain all the way. I have seen several threads started by people who did this and then could not get the battery to charge in the phone without a jump start from an external charger.
Edit:
Did you task 29 between each ROM flash?
Hamsteriel said:
Unless you have another way to recharge that battery, I wouldn't recommend letting it drain all the way. I have seen several threads started by people who did this and then could not get the battery to charge in the phone without a jump start from an external charger.
Edit:
Did you task 29 between each ROM flash?
Click to expand...
Click to collapse
Task 29 shouldn't be necessary...
To the OP, download a different ROM, on a different computer and with a different internet connection if possible. You never know (I had to do this once cuz I kept downloading corrupted ROMs).
ill try using my laptop and incase that dosnt work how do u do a task 39
nuts this is giving me so many prob i get it to load the new rom and it sas its sucesful and i see it loadin gon the phone and when it restarts it just goes rite back to bootlader like nothing was laded onto it
um i treid flashing multiple roms on multiple computers and i have a nwe prob god hats me anyway now my phone isnt gets into the progress bar the one that shows u how much of the rom is loaded onto the divice and its just stuck at zero im sry to bother u but this is really becoming frustrating
levytheman95 said:
um i treid flashing multiple roms on multiple computers and i have a nwe prob god hats me anyway now my phone isnt gets into the progress bar the one that shows u how much of the rom is loaded onto the divice and its just stuck at zero im sry to bother u but this is really becoming frustrating
Click to expand...
Click to collapse
If its stuck at zero, pull out battery, try again. Switch USB wires, download a different ROM and make sure you have HardSPL. Its a very simple process actually. Not rocket science... So don't panic
Keep at it, and you will get it.
i tried to restore my hard spl and even that i cant put on
I know you said you tried several roms were any of these stock roms?
You shouldn't need to re-flash Hard SPL.
Try the sd card method instead.