Database Develop

[Q] Help ! My tab p1000 hangs on samsung logo

For about a week now my samsung galaxy tab p1000 keeps freezing on the samsung logo screen and every minute ore so vibrates very short.
No matter how long i wait it keeps like that . Ive tryed the reset from the recovery mode (powerbutton + volume up) but no luck. The tab is still on a stock fw 2.2 i believe. and no root or anything.
Im very new on the whole rom stuf so some help is needed on how to restore the tab. I havent flashed it or anithing. Also it gives a error like in the screenshot below:

You should flash your tab and install a new firmware that's the only solution

omr911 said:
You should flash your tab and install a new firmware that's the only solution
Click to expand...
Click to collapse
oke i figured that much yesterday, when reading some topics, but wich rom do i need to use?? because i dont know how to root the tab because it wont boot ore is rooting not a must?

dude... get the latest 2.3.3 firmware...
you may check www.samfirmware.com to see latest firmware for your deivce. If you are in ASIA region, look for JPI edition. Its good, fast and stable.
Use ODIN to flash, with REPARTITION ENABLE... once complete flashing, reboot, and repeat the FLASHING again... DO IT TWICE..., but REPARTITION ONCE only...

Do i have to fully boot between flashing, or after first flash straight to download mode?
Sent from my X10i using XDA App

to play safe, let it boot.. but you can skip the configuration and shutdown and go into download mode..

Oké gona try it when i get home
Sent from my X10i using XDA App

jhnschts said:
oke i figured that much yesterday, when reading some topics, but wich rom do i need to use?? because i dont know how to root the tab because it wont boot ore is rooting not a must?
Click to expand...
Click to collapse
You should watch the tutorial at YouTube before taking any step
Sent from my GT-P1000 using XDA App

thx for all the help. took me couple of hours but got it running again on andriod 2.3.3

MY P1000 JUST HANG ON GALAXY TAB LOGO, CANT CONNECT TO CWM BUT CAN GO TO DOWNLOAD MODE BUT I CANT CONNECT IT TO PC!!!
sirs,,, can you please help me please! I GOT A samung galaxy tab p1000 and its rooted and installed overcome rom, i restored my stocktrom coz id like to get some files \. then suddenly my p1000 just hang on galaxy tab logo!!! it wont access to cwm recovery but it can access download mode the problem is my computer dont recognize my device!! nid help please!!!
( the latest) i

Im at your same state. My tab hangs on samsung logo and lets me to download alone. I can help you with the drivers part. Im sure you have the Kies in your system. Just push the on button and connect your phone to the pc and run Kies. You have an option to troubleshoot which will update the drivers for your phone. This worked for me. For the rest of the part, there is a chap who is helping me on this forum and he advised me to go for stock ROM. Ill try that today after sufficiently charging up my phone.
I ve been searching for a while now and looks like this is common and nothing much to worry about. Ill keep you posted on what happened on my attempt to odin flash the stock ROM.

Hello friend, my tab is back and working fine now. Hope tried connecting kies to get your driver up for the tab. Once its up you can get to the download and flash stock rom using odin. This would bring your phobe back to life.
I am currently running on overcome experience rom. Its pretty good and they have great instructions on their site. Try that you should be all set.
Best of luck.

I have the exact same issue. I've been trying to flash a Euro 2.3.3 for the last 5 hours. Anything special you did before I create a new thread? I've done this a billion times on my old tab....I just got this one today off ebay.

copper7op said:
I have the exact same issue. I've been trying to flash a Euro 2.3.3 for the last 5 hours. Anything special you did before I create a new thread? I've done this a billion times on my old tab....I just got this one today off ebay.
Click to expand...
Click to collapse
Can you be more specific on the state of your G-Tab?
What firmware were you using before the problem occurs?
if you are updating from proyo, you will need to flash dbdata.rfs. For your reference you can follow these following steps (given you can access download mode).
http://forum.xda-developers.com/showpost.php?p=24908470&postcount=2

Thanks a lot
I had tried to install ICS but done something wrong and my tab wasn't working.
after that followed instructions given here and its working after selecting factory reset.
Now only problem i have is kies don't show my tab's firmware version. And i also wanted to know how to store backup taken at ICS update thanks in advance
---------- Post added at 06:24 PM ---------- Previous post was at 06:17 PM ----------
I had tried to install ICS but done something wrong and my tab wasn't working.
after that followed instructions given here( including flashing twice with partion uncheck for second) but tab was hanging at samsung logo and its working after selecting factory reset from recovery option.
Now only problem i have is kies don't show my tab's firmware version. And i also wanted to know how to store backup taken at ICS update thanks in advance

I doubt you will ever get Kies to work with custom ICS rom in your tab.

priyana said:
I doubt you will ever get Kies to work with custom ICS rom in your tab.
Click to expand...
Click to collapse
Hahaha.. you are still doubting? -- or should you have said you're sure?

who knows Samsung has catch up, then I will be caught out.

kurs2020 said:
MY P1000 JUST HANG ON GALAXY TAB LOGO, CANT CONNECT TO CWM BUT CAN GO TO DOWNLOAD MODE BUT I CANT CONNECT IT TO PC!!!
sirs,,, can you please help me please! I GOT A samung galaxy tab p1000 and its rooted and installed overcome rom, i restored my stocktrom coz id like to get some files \. then suddenly my p1000 just hang on galaxy tab logo!!! it wont access to cwm recovery but it can access download mode the problem is my computer dont recognize my device!! nid help please!!!
( the latest) i
Click to expand...
Click to collapse
Use the latest version of odin. Also go into download mode before connecting to pc. Plase thank me if you found this useful.

Get back to stock rom

Hi, so I installed CM7 on my galaxy mini but now I want go back to stock rom but the problem is when I conect my phone to pc odin detect it I click start(I want GB 2.3.4) and on my phone screen comes up message samsung own update fail . And nothing happens. Plz help my.
Samsung galaxy mini CM 7.1/2.3.7
P.S Sorry for bad english

Did you go into the downloading mode? (Vol down + middle button + power)
Sent from my GT-S5570 using XDA

Download
Yes Im in download mod and I get this message samsung_bml_format FAIL: 90220000
ONW UPDATE FAIL!!!

tauriuxx said:
Hi, so I installed CM7 on my galaxy mini but now I want go back to stock rom but the problem is when I conect my phone to pc odin detect it I click start(I want GB 2.3.4) and on my phone screen comes up message samsung own update fail . And nothing happens. Plz help my.
Samsung galaxy mini CM 7.1/2.3.7
P.S Sorry for bad english
Click to expand...
Click to collapse
ARM11boot_GT-S5570.tar Flashed this like BOOT (nothing more selected) and after that reboot phone to download mode and flashed by following the guide. Now everything works fine. This model only need TASS_V1 ops file, no PIT files for this. Successfuly flashed with XXJL9 fw. Thanks RIFF for bootrepair this phone! BR
You can find "ARM11boot_GT-S5570.tar" here: http://www.4shared.com/dir/LqqytWde/sharing.html

mr.faridcom said:
ARM11boot_GT-S5570.tar Flashed this like BOOT (nothing more selected) and after that reboot phone to download mode and flashed by following the guide. Now everything works fine. This model only need TASS_V1 ops file, no PIT files for this. Successfuly flashed with XXJL9 fw. Thanks RIFF for bootrepair this phone! BR
You can find "ARM11boot_GT-S5570.tar" here: http://www.4shared.com/dir/LqqytWde/sharing.html
Click to expand...
Click to collapse
be careful on flashing the bootloader buddy.. it can hard brick your phone.. DO IT AT YOUR OWN RISK..

Brick
Hehe. Now I bricked my phone. When I turn it on it just shows blank screen. But I talked with my Dad and we decided to make a jig usb. Well tomorow Im going to buy a 300k resistor and micro usb. I will try to make a jig usb with my dad so then I can put my phone into download mode and flash it. I hope this gonna work http://www.youtube.com/watch?v=eOxtYSdEy-o

You got a nice dad man. If I tell my dad about USB jigs he would shout at me saying "WHO THE **** ASKED YOU TO ****ING SCREW UP YOUR PHONE? NOW SUFFER!"

chemicalrage said:
You got a nice dad man. If I tell my dad about USB jigs he would shout at me saying "WHO THE **** ASKED YOU TO ****ING SCREW UP YOUR PHONE? NOW SUFFER!"
Click to expand...
Click to collapse
yeah... lmfao

Thanks for all replies. I already sold my galaxy mini so no more problems with it
Sent from my LT22i using Tapatalk 2

tauriuxx said:
Thanks for all replies. I already sold my galaxy mini so no more problems with it
Sent from my LT22i using Tapatalk 2
Click to expand...
Click to collapse
Buddy i dont know if i am right or not but always remember after u flash a custom rom and u want to return to gingerbread ,,
flash all 4 files i.e boot , phone,pda ,csc files.. never use md5 tar files a single flash files ..if u do that 100% u gonna brick ur phone,,
always remember 4 flash files...

Samsung Galaxy Mini S5570 will not turn on
Samsung Galaxy Mini S5570 device does not respond at all I crashed this ekllenti'i arraza was .Cyanus kernel v1.9 changelog, I would like to be the yarddımc from friends who knew I had to install.
Phone Opening Download Mode but not late

Looking for some advice please

Hello,
My wife has somehow managed to get her galaxy mini stuck in a boot loop. USB debug was not enabled before this happened and I cannot see the phone with adb. I can get to download mode, does anyone have any suggestions on how to go from here?

Frazer Scott said:
Hello,
My wife has somehow managed to get her galaxy mini stuck in a boot loop. USB debug was not enabled before this happened and I cannot see the phone with adb. I can get to download mode, does anyone have any suggestions on how to go from here?
Click to expand...
Click to collapse
what is the current rom? try wipe data/factory reset in recovery.. but user apps will be gone and settings will be back to default..

Frazer Scott said:
Hello,
My wife has somehow managed to get her galaxy mini stuck in a boot loop. USB debug was not enabled before this happened and I cannot see the phone with adb. I can get to download mode, does anyone have any suggestions on how to go from here?
Click to expand...
Click to collapse
Install kies in ur pc
Install odin for mini
Dwnload tass.ops
Check for working usb cable and port
Dwnld any stock firmware from samfirmwares.com
Extract its contents and place it anywhere in pc
Keep ur phone in download mode...power+centre+down buttons when phone is off
Connect to pc while running odin
If odin detects your device ( to check this, observe a yellow bar in COM1 AFTER connectin phone)
Click one package, select ops, select tar.md5(stock firmware)
Push start
Have some water take a potty break
When a blue colour in COM1 is shown with pass in it...THEN ONLY DISSCONNECT THE PHONE
THE ABOVE STEP IS VVVVERY IMPORTANT
Use ur phone like before
Happy flashing and good luck

A nice quick clean guide...I will put it in my blog with links..thanx mate

Download The S5570BUKB1_4 From Here:-http://hotfile.com/dl/112744353/ac8c83b/S5570BUKB1.rar.html
I Was Also Stucked In BOOTLoops But I was Accesing The Download MOde..
This Is The Stock FROYO Firmware....
Try THis Before Using GB...
FlasH It Via Odin
Tutorial(ViDeo):-
http://www.youtube.com/watch?v=7mv5d1q4Bfo
Click to expand...
Click to collapse
This Will Work 100%....
Press The ThanKs Button if i helped u

Ph3rOn!xX said:
Download The S5570BUKB1_4 From Here:-http://hotfile.com/dl/112744353/ac8c83b/S5570BUKB1.rar.html
I Was Also Stucked In BOOTLoops But I was Accesing The Download MOde..
This Is The Stock FROYO Firmware....
Try THis Before Using GB...
FlasH It Via Odin
Tutorial(ViDeo):- http://www.youtube.com/watch?v=7mv5d1q4Bfo
This Will Work 100%....
Press The ThanKs Button if i helped u
Click to expand...
Click to collapse
There's absolutely no need to flash froyo before gingerbread. U can directly flash gb...

freakyfriday said:
There's absolutely no need to flash froyo before gingerbread. U can directly flash gb...
Click to expand...
Click to collapse
No.. U HAve 2 ..I Also Had Flashed GB via Odin 10-15 Times But It Didnt Work For Me ...
Thn Aftrwrds I Flashed The Stock Froyo ... Which Worked For Me ..

Ph3rOn!xX said:
No.. U HAve 2 ..I Also Had Flashed GB via Odin 10-15 Times But It Didnt Work For Me ...
Thn Aftrwrds I Flashed The Stock Froyo ... Which Worked For Me ..
Click to expand...
Click to collapse
You are just unlucky

KoperKiller said:
You are just unlucky
Click to expand...
Click to collapse
Lolololol
Sent from my GT-S5570 using xda premium

ph3ron!xx said:
no.. U have 2 ..i also had flashed gb via odin 10-15 times but it didnt work for me ...
Thn aftrwrds i flashed the stock froyo ... Which worked for me ..
Click to expand...
Click to collapse
roflmfao! !! :d

Dont laugh ... plzz... Try i & thn Laugh.. as i did
When i was in such prob i had given my phone to the service centre & even dat dum guy coulnt fix it out... Yagya Gaire helped me abt this thing & it worked
Sent from my GT-S5570 using XDA

Thanks for the replies. I will try odin, im wondering if odin will work if I cannot see the phone with adb? It is currently stock everything as it was out of the box. The first thing I did was the factory reset but it diddnt help.

Ph3rOn!xX said:
No.. U HAve 2 ..I Also Had Flashed GB via Odin 10-15 Times But It Didnt Work For Me ...
Thn Aftrwrds I Flashed The Stock Froyo ... Which Worked For Me ..
Click to expand...
Click to collapse
If ur from any cm7 or cm9 then this is useful.
first flash GB using odins u see the samsung logo boot looping now close the odins ,remove the battery,reinsert it and now enter into recovery and wipe data and cache. (I do the same thing when I flash gb from cm9)

It seems odin is windows only? Does anyone know of a good tool for Linux?

Frazer Scott said:
It seems odin is windows only? Does anyone know of a good tool for Linux?
Click to expand...
Click to collapse
Open windows in virtual box.

Frazer Scott said:
It seems odin is windows only? Does anyone know of a good tool for Linux?
Click to expand...
Click to collapse
For Linux you have Heimdall.

S5830 black screen no download mode dont turn on

i was trying to unlock the phone because i could not use my sim card.and now i cant turn in on.it don't go in download mode or anything other(the screen is always black) but luckily
the odin program recognize it but it always stuck on setup connection.what must i do???i've tried everything.

markoskag25 said:
i was trying to unlock the phone because i could not use my sim card.and now i cant turn in on.it don't go in download mode or anything other(the screen is always black) but luckily
the odin program recognize it but it always stuck on setup connection.what must i do???i've tried everything.
Click to expand...
Click to collapse
it used andoid 2.3.3

unbrick galaxy ace
hey markoskag25,
i had the nearly the same issue (stuck on setupconnection),
i first try with a rom containing 4 files (pda, csc, etc..) didnt work. then tried with a single file rom (one file gignerbread ) n then it worked, using odin 4.38 .

pakeejy said:
hey markoskag25,
i had the nearly the same issue (stuck on setupconnection),
i first try with a rom containing 4 files (pda, csc, etc..) didnt work. then tried with a single file rom (one file gignerbread ) n then it worked, using odin 4.38 .
Click to expand...
Click to collapse
can you send me the files of what i must done?im a noob in android mobiles

pakeejy said:
hey markoskag25,
i had the nearly the same issue (stuck on setupconnection),
i first try with a rom containing 4 files (pda, csc, etc..) didnt work. then tried with a single file rom (one file gignerbread ) n then it worked, using odin 4.38 .
Click to expand...
Click to collapse
it stuck again on setup connection

markoskag25 said:
i was trying to unlock the phone because i could not use my sim card.and now i cant turn in on.it don't go in download mode or anything other(the screen is always black) but luckily
the odin program recognize it but it always stuck on setup connection.what must i do???i've tried everything.
Click to expand...
Click to collapse
Goto Sammobile.com & register there choose the firmware according to your reigion.....then try to flash it via Odin....there are lots of videos in youtube about flashing ace via odin....
****It is moresafe to flash the firmware version which u had last
**** do at your own risk...im not responsible...:beer: the luck is still Odin recognize your phone!!!
*** use google & youtube for process!!
Sent from my GT-S5830 using xda app-developers app

Mayhem66 said:
Goto Sammobile.com & register there choose the firmware according to your reigion.....then try to flash it via Odin....there are lots of videos in youtube about flashing ace via odin....
****It is moresafe to flash the firmware version which u had last
**** do at your own risk...im not responsible...:beer: the luck is still Odin recognize your phone!!!
*** use google & youtube for process!!
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
i cant do it cause odin always stop an setup connection .:/ do you know what must i do???

Hi markoskag25!
Perhaps you could read this
"How to unbrick galaxy ace...WORKING 100%"
by pagadalachetan
You could also try doing your questions in Galaxy Ace S5830 Q&A
Good luck!

BajoPrimate said:
Hi markoskag25!
Perhaps you could read this
"How to unbrick galaxy ace...WORKING 100%"
by pagadalachetan
You could also try doing your questions in Galaxy Ace S5830 Q&A
Good luck!
Click to expand...
Click to collapse
thanks for the help but my phone cant boot in any mode :/

markoskag25 said:
thanks for the help but my phone cant boot in any mode :/
Click to expand...
Click to collapse
Hi markoskag25!
Prehaps in How to unbrick Samsung Galaxy Ace by SuperMini
you could find more possible solutions: removing the battery and putting again before odin... , with an usb jig ...
Anyway, good luck.

BajoPrimate said:
Hi markoskag25!
Prehaps in How to unbrick Samsung Galaxy Ace by SuperMini
you could find more possible solutions: removing the battery and putting again before odin... , with an usb jig ...
Anyway, good luck.
Click to expand...
Click to collapse
the usb jig dont work..:/

markoskag25 said:
the usb jig dont work..:/
Click to expand...
Click to collapse
MY phone is also in the same state now,
what did you do to make it work,
my phone got detected but hangs at setup connection in odin and no answer from phone in z3x,
please advice me on this,
thank you.

Galaxy S dead after kernel update failed in cwm Recovery

Hey Guys, i tried to update the kernel after Updating Cynogen mod by Ivendor on my Galaxy S Plus, but something went wrong the recovery crashed duo updating , after i switched the phone off nothing happens anymore the phone doesn't switch on if i push the power button , any idee to get it back to life ?

Tried getting it in Download mode (http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#Download_Mode) and flash a fresh ROM using Odin from there? EDIT: might try flashing a kernel first of course, and see if it can be rescued.

L0kiii said:
Tried getting it in Download mode (http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#Download_Mode) and flash a fresh ROM using Odin from there? EDIT: might try flashing a kernel first of course, and see if it can be rescued.
Click to expand...
Click to collapse
Key combo doesn't work , like i sayd the phone do nothing , there is no idication of loading or anything if i plug in USB.

Nogardrevlis Lectar said:
Key combo doesn't work , like i sayd the phone do nothing , there is no idication of loading or anything if i plug in USB.
Click to expand...
Click to collapse
What kernel did you try to install?

If u have warranty u can give it back.. The same thing happened to me and because i had warranty i got free repair
Sent from my GT-I9001 using xda app-developers app

akwi42 said:
What kernel did you try to install?
Click to expand...
Click to collapse
I tryed to install this kernel, had worked before, so i decided to update to Invendor Beta 3 with this kernel flashed Ivendor first then kernel.But recovery rebooted during kernel install, then i try to restart the phone again and flash again but that seems to be the thing that i shouldn't do because the current kernel was only in memory duo the fail of installing the newone.
http://forum.xda-developers.com/showthread.php?p=38710498

kagouro said:
If u have warranty u can give it back.. The same thing happened to me and because i had warranty i got free repair
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
No I'am out of waranty i had got the Phone from Vodafone, i just bought a jig now hope i get it in download mode to reflash if didn't i will sent it to Handy repair shop maybe they can fix it.
/me waits for his jig to arive

Nogardrevlis Lectar said:
No I'am out of waranty i had got the Phone from Vodafone, i just bought a jig now hope i get it in download mode to reflash if didn't i will sent it to Handy repair shop maybe they can fix it.
/me waits for his jig to arive
Click to expand...
Click to collapse
Try this... I had a similar thing happen to me a while ago...
http://forum.xda-developers.com/showthread.php?t=819551

1. Go back to stock: Flashing To Original Rom - Using Odin on GT-i9000
2. Root your device: Rooting GT-I9000 2.3.3 [India DDJV9]
3. Install ICS: Installing Ice-cream Sandwich 4.0.4 On Samsung Galaxy S GT-i9000
4. Install JB: Installing Jelly Bean 4.1 on Galaxy S GT-I9000
ENJOY

gopalasubramanium said:
1. Go back to stock: Flashing To Original Rom - Using Odin on GT-i9000
2. Root your device: Rooting GT-I9000 2.3.3 [India DDJV9]
3. Install ICS: Installing Ice-cream Sandwich 4.0.4 On Samsung Galaxy S GT-i9000
4. Install JB: Installing Jelly Bean 4.1 on Galaxy S GT-I9000
ENJOY
Click to expand...
Click to collapse
Thanks for your Advice,
but how should i do that the phone do nothing no Recovery or Download mode no power via buttons , i wait for the jig and will see if something happend than.
Edit: The Jig doesn't solved the Problem no Download mode even with jig and no com port found in Odin. I send the phone out now to a Repair service to perform Jtag Repair.
Update: Phone is back and working again. will stick with android 2.3.6 in the meantime , don't want brick it again.