Hey guys,
I am pretty new at this rooting stuff and with all my courage I finally rooted my phone successfully without increasing binary counter or any yellow triangle . But I am not satisfied. I am happy with stock ICS but want to overclock the processor.
My question is will overclocking increase the binary counter and display a yellow triangle on my phone? And which tool will be good to overclock. I know few of them like tegrak, setcpu, antutu cpu master etc.
Thank you.
Sent from my GT-N7000 using XDA
Viperr said:
Hey guys,
I am pretty new at this rooting stuff and with all my courage I finally rooted my phone successfully without increasing binary counter or any yellow triangle . But I am not satisfied. I am happy with stock ICS but want to overclock the processor.
My question is will overclocking increase the binary counter and display a yellow triangle on my phone? And which tool will be good to overclock. I know few of them like tegrak, setcpu, antutu cpu master etc.
Thank you.
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
You must have a kernel that allows overclock before you can use those software to set it up. If you flash a kernel using mobile odin it will not increase the binary counter. I used Franco kernel r5 with Franco updater that allows overclock to 1600 MHz.
So does the stock kernal support overclocking?
Sent from my GT-N7000 using XDA
I've rooted my international Note and overclocked to 1.6GHz using Tegrak. All you need is root and that app and you can overclock, and all you do is tap a button and it loads a file into the kernel allowing overclocking within the app. Hope this helps.
Sent from my GT-N7000 using XDA
tknguyencsu said:
You must have a kernel that allows overclock before you can use those software to set it up. If you flash a kernel using mobile odin it will not increase the binary counter. I used Franco kernel r5 with Franco updater that allows overclock to 1600 MHz.
Click to expand...
Click to collapse
I use Franco R5 as well with his app and Tegrak only for the GPU.
Using Tegrak to overclocl to 1.6Ghz never gives me good results...very inconsistent while with Franco I get super performance and consistency that you can see on my youtube channel and that is how I got my personal Quadrant record of 5823 (for those who like benching).
Performance for tough emulators like MAME reloaded benefit greatly from the extra speed.
So will ONLY overclocking with the app (tegrak) and NOT flashing customs kernals increase the binary counter and display yellow triangle at startup?? (I know that triangle causes no harm but still i consider it very ugly
That is my biggest question right now!!
Sent from my GT-N7000 using XDA
Viperr said:
So will ONLY overclocking with the app (tegrak) and NOT flashing customs kernals increase the binary counter and display yellow triangle at startup?? (I know that triangle causes no harm but still i consider it very ugly
That is my biggest question right now!!
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
The free version is non-permanent and has to be loaded after every restart. But I don't have a yellow triangle and my binary counter hasn't gone up.
Now this is something totally wierd!! I overclocked my Galaxy Note to 1.6 Ghz and locked the GPU to higher clock but when i ran quadrant, instead of increase in score there was a DROP of 500. And each time i ran it the score went on decreasing.
Score at 1.4Ghz -->3697
Score at 1.6Ghz -->2498 :what:
Can somebody please explain me the reason??
Sent from my GT-N7000 using XDA
Viperr said:
Now this is something totally wierd!! I overclocked my Galaxy Note to 1.6 Ghz and locked the GPU to higher clock but when i ran quadrant, instead of increase in score there was a DROP of 500. And each time i ran it the score went on decreasing.
Score at 1.4Ghz -->3697
Score at 1.6Ghz -->2498 :what:
Can somebody please explain me the reason??
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
What are the individual scores? The CPU score might have gone up but the GPU might have gone down due to not enough power.
Viperr said:
Now this is something totally wierd!! I overclocked my Galaxy Note to 1.6 Ghz and locked the GPU to higher clock but when i ran quadrant, instead of increase in score there was a DROP of 500. And each time i ran it the score went on decreasing.
Score at 1.4Ghz -->3697
Score at 1.6Ghz -->2498 :what:
Can somebody please explain me the reason??
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
If you are using tegrak that is exactly what happens to me. I get about 4700 stock and with tegrak I can't get my CPU down and score 3k or get a 5k run but with Franco r 5 I get around 5500 and my personal best 5823 so I only use tegrak for gpu
Sent from my GT-N7000 using XDA
Liam0102 said:
The CPU score might have gone up but the GPU might have gone down due to not enough power.
Click to expand...
Click to collapse
Yeah, maybe you are right....it must be the reason
Sent from my GT-N7000 using XDA
shaolin95 said:
If you are using tegrak that is exactly what happens to me. I get about 4700 stock and with tegrak I can't get my CPU down and score 3k or get a 5k run but with Franco r 5 I get around 5500 and my personal best 5823 so I only use tegrak for gpu
Click to expand...
Click to collapse
Yes I do use tegrak. The thing is that I fear to use some other kernal. Your scores are awesome, wish i could get such scores on my phone on stock kernal. Is there any other effective tool which will TRUELY overclock my phone??
Sent from my GT-N7000 using XDA
Viperr said:
Yes I do use tegrak. The thing is that I fear to use some other kernal. Your scores are awesome, wish i could get such scores on my phone on stock kernal. Is there any other effective tool which will TRUELY overclock my phone??
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
Sadly there is not much options right now to overclock..either Tegrak or a kernel that has it already built in which is why I do not change Franco R5. Hopefully we will get more options soon.
Goku kernel allows you to overclock.
Zapped through server hops to XDA forums
praetorius said:
Goku kernel allows you to overclock.
Zapped through server hops to XDA forums
Click to expand...
Click to collapse
Where do you see that? I only see overclocking in the wishlist.
Sent from my GT-N7000 using XDA
hey, i have a question i install a custom Rom and Underclocked my Galaxy note GT-N7000 but after 1 week or so i returned back to stock Rom because i didn’t liked that so my question is will my phone be over or underclocked even i installed stock Rom or will it come back to the normal state? please reply asap….
sorry for bad English...
Irfan abid said:
hey, i have a question i install a custom Rom and Underclocked my Galaxy note GT-N7000 but after 1 week or so i returned back to stock Rom because i didn’t liked that so my question is will my phone be over or underclocked even i installed stock Rom or will it come back to the normal state? please reply asap….
sorry for bad English...
Click to expand...
Click to collapse
custom roms come with custom kernel which would have helped you in undervolting or overclocking. When you flash stock rom it replaces the kernel with stock kenel, hence back to the normal state.
treacherous_hawk said:
custom roms come with custom kernel which would have helped you in undervolting or overclocking. When you flash stock rom it replaces the kernel with stock kenel, hence back to the normal state.
Click to expand...
Click to collapse
Thanks i was worried if my phone is underclocked even after installing stock rom thanks again :highfive:
Just suggestion
Be carefull with oc..
In long term it can coz trouble with your harware
Related
is there or could someone make a kernel that can be overclocked to 1.2 Ghz nd with Voodoo but only REQUIREMENT is that it disables the full battery popup.i have searched for days on how to disable it and found the secret code but nothing happens when i do it. Thanks in advanceI have firefly 2.2
what rom are you using?
havent seen that pop up in a looong time
Yeah, almost every ROM out there now has that disabled. And Voodoo does not support OC.
s2h2golf said:
Yeah, almost every ROM out there now has that disabled. And Voodoo does not support OC.
Click to expand...
Click to collapse
voodoo doesn't support oc? Since when? Glitterballs is oc at 1280 mhz by default and uses voodoo.
Sent from my SGH-I897 using XDA App
That's a rom issue, not kernel.
Sent from my GT-I9000 using Tapatalk
studacris said:
voodoo doesn't support oc? Since when? Glitterballs is oc at 1280 mhz by default and uses voodoo.
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
Yep, I stand corrected. Most OC kernels now use the Universal Lagfix - forgot about glitterballs kernel.
i have firefly 2.2
I just installed tegrak overlocking on my sgs fone. Pls help me what settings will i use. im running android 2.3.3. pls help
You need a kernel that supports overclocking. For values just look in the Glitch-kernel-thread. And I prefer 'Voltage Control'.
Sent from my GT-I9000 using XDA Premium App
hi. i saw the thread. WOW too techy for me. i dont know where to start and what to look for
Just look at the values.
Sent from my GT-I9000 using XDA Premium App
i dont know what is my rom? if cvm or maui? i mean cm
Go to Settings -> About phone then you'll see what's your ROM.
how will i know if im CM7 or maui as my fone doesnt say so
errrr if you're talking about the tegrak overclocking app, it does overclocking by itself without the need for a custom kernel or other app. that is its purpose *facepalm*
Try set OC to 1.2 GHz and see how that goes. if it makes the phone reboot/not work properly, click on "optimisation" and increase the voltage value for 1200 a little bit (ie. 25 or 50 mv). You can apply the same principles when attempting higher GHz too.
actually ive installed voltage control but it says my fone's kernel does not support voltage control. What kernel will i install so i can overclock my fone. Pls see below my firmware:
Firmware version: 2.3.3
Baseband version: I9000 XXJVO
Kernel Version: 2.6.35.7-i9000XWJVH-CL184813
Build Number: GINGERBREAD.XWJVO
@oswade i followed your instructions. my fone did not boot at 1.2 ghz. what does it mean?
by the way i read from other thread that stock kernel cant be overclocked that i need a custom kernel for overclocking? if this is true then installing tegrak overclock is useless except for custom kernel?
softpinkishlips said:
by the way i read from other thread that stock kernel cant be overclocked that i need a custom kernel for overclocking? if this is true then installing tegrak overclock is useless except for custom kernel?
Click to expand...
Click to collapse
Yes, you need a custom kernel.
And be sure to have the kernel cleaning script on your sdcard to, it can provide flashing if you have made sh*t.
Available here: http://forum.xda-developers.com/showthread.php?t=1053304
Thanks Lunchbox!! However i find it complicated and im scared to do it. i guess ill be needing a tutor for this.
Tank u very much!
softpinkishlips said:
Thanks Lunchbox!! However i find it complicated and im scared to do it. i guess ill be needing a tutor for this.
Click to expand...
Click to collapse
Why?
You lookbfor a kernel that fits your firmwareversion and that supports oc. You have to flash this kernel via Odin oder CWM (there are always installation instructions in each kernel-thread). Then you download 'Voltage Control' out of the market, set your CPU frequency and you are done.
Sent from hell to take your soul
Sent from my GT-I9000 using XDA Premium App
Ok lunchbox ill try.
Sent from my GT-I9000 using XDA Premium App
Hey guys, tried to search for in the forums havent got any luck in finding it. If any of you guys know where the thread for this, please kindly post it here. Thanks
So to my question, at what clockspeed can we overclock our tab without it getting any negative reactions. Meaning, without it busting the battery breaking the tab in whatever way. Had mine overclocked at 1.2ghz. But i want to try it a little more highee.. just want to know if it would be safe.
Sent from my GT-P1000 using XDA App
Seems like no one even cares to answer..
Sent from my GT-P1000 using XDA App
I wouldn't recommend clocking above 1200. At least with the kernel I'm using max clock speed is 1400 and cranking it up to max almost always creates stability issues.
Okay thanks.. my rom allows me to overclock to 1.6ghz. So well wont try it then. Thanks for the response.
Sent from my GT-P1000 using XDA App
I have 1.4ghz stable, i think it depends the kernel with the another kernel I cant get 1.3 gets stable.
Pd: I have the lastest Ronan's kernel for p1000 l/n
How do you overclock your cpu? I have the stock gingerbread, i have rooted with the DoomLord method, i install SetCPU, but the max value is at 1000 Mhz. How can i raise that value to 1200 Mhz?
Sent from my GT-P1000 using XDA App
you need a custom kernel like CM7, Overcome. y you have a latin america tab [P1000N/L] you can use Ronan or Humberos Kernel. in the developement seccion.
Thanks. I will try Overcome Kratos.
Sent from my GT-P1000 using XDA App
HI, I have a galaxy mini and i want to overclock it, i tried to but then it refused to switch on and i had to install the custom rom again! Here are my specs-
MODEL NUMBER- GT-S5570
ANDROID VERSION- 2.3.6
BASEBAND VERSION- S5570XWKT2
KERNEL VERSION- [email protected]#1
BUILD NUMBER- GINGERBREAD,JVKT1
Thats it! Please someone tell me which kernels and images to download to overclock my phone! Thanks in advance! http://forum.xda-developers.com/images/smilies/good.gif
Mraps98 said:
HI, I have a galaxy mini and i want to overclock it, i tried to but then it refused to switch on and i had to install the custom rom again! Here are my specs-
MODEL NUMBER- GT-S5570
ANDROID VERSION- 2.3.6
BASEBAND VERSION- S5570XWKT2
KERNEL VERSION- [email protected]#1
BUILD NUMBER- GINGERBREAD,JVKT1
Thats it! Please someone tell me which kernels and images to download to overclock my phone! Thanks in advance! http://forum.xda-developers.com/images/smilies/good.gif
Click to expand...
Click to collapse
If you are using stock ROM only, refer this:
http://forum.xda-developers.com/showthread.php?t=1485122
Thanks, but my rom is custom
Sent from my GT-S5570 using xda app-developers app
Custom roms already have the ability to overclock... Either go under settings or download setcpu.
Sent from my GT-S5570 using xda app-developers app
Thanks, now ill root my phone and install setcpu, hope it works, you rock man! Please Tell me if i need to do anything else
Sent from my GT-S5570 using xda app-developers app
I downloaded set cpu, but i couldn't go more than 600 mhz please help
Sent from my GT-S5570 using xda app-developers app
What's Custom Rom you used? I think your custom rom not support OC kernel
Sent from my GT-S5570 using xda app-developers app
Mraps98 said:
I downloaded set cpu, but i couldn't go more than 600 mhz please help
Sent from my GT-S5570 using xda app-developers app
Click to expand...
Click to collapse
If your custom doesn't support oc, ask the developer for help lol. Alternatively, you could flash another kernel that supports oc. But you gotta get it right.
Sent from my GT-S5570 using xda app-developers app
Mraps98 said:
Thanks, now ill root my phone and install setcpu, hope it works, you rock man! Please Tell me if i need to do anything else
Sent from my GT-S5570 using xda app-developers app
Click to expand...
Click to collapse
So if u still need to root you might be using a stock ROM not custom coz u need to be and ull be rooted when you have a custom ROM :/
Sent from my GT-S5570 using xda premium
My Custom rom
I am not sure if its custom or not, its called S5570_JVKT1_2.3.6 can you guys please tell me if its custom or not? please help me
Thank you all
I finally overcloekd my phone, thanks to you guys, it runs at 864mhz now, very fast, i used the kernel by godell (godell more)
Mraps98 said:
I am not sure if its custom or not, its called S5570_JVKT1_2.3.6 can you guys please tell me if its custom or not? please help me
Click to expand...
Click to collapse
It's stock
Mraps98 said:
I finally overcloekd my phone, thanks to you guys, it runs at 864mhz now, very fast, i used the kernel by godell (godell more)
Click to expand...
Click to collapse
I recommend to set the max cpu frequency around 729-806mhz, minimal to 245mhz and SmartAssV2 for the governor. I'ts fast enough and the battery live is good. If you set the cpu frequency to the max, your device will become unstable and the battery drain faster.
I'm just giving recommendations. So, everything is up to you.
(P.S. I'm new on XDA )
vengeance.RA said:
I recommend to set the max cpu frequency around 729-806mhz, minimal to 245mhz and SmartAssV2 for the governor. I'ts fast enough and the battery live is good. If you set the cpu frequency to the max, your device will become unstable and the battery drain faster.
I'm just giving recommendations. So, everything is up to you.
(P.S. I'm new on XDA )
Click to expand...
Click to collapse
First of all, welcome to XDA...
My OC is set at:
Min: 245MHz
Max: 729MHz
Governor: SmartAssV2
IO Scheduler: Deadline
SystemUI and stuff doesn't lag, but large apps lags sometimes but it's acceptable.
Hi
I have install setCpu on my touchpad (64G) with the latest nightly (cm-9-20121111-NIGHTLY-tenderloin)
It seems to work fine and stats tells that i am up to 1.5GHZ.
I have seen on the forum the GamerZ kernel tuned to OC the touchpad.
Question is simple, is there a benefit from installing this kernel or setCpu is enough, or both are meant to live together ?
Thanks
Well, there is the GPU OC, which really helps with fps if your TP can handle it...
Sent from my cm_tenderloin using xda premium
-SGA- said:
Well, there is the GPU OC, which really helps with fps if your TP can handle it...
Sent from my cm_tenderloin using xda premium
Click to expand...
Click to collapse
So if i install this kernel, there is no need for setcpu ?
ethome said:
So if i install this kernel, there is no need for setcpu ?
Click to expand...
Click to collapse
With the GamerZ kernel you'll be able to OC to 2.something ghz and the GPU will be overclocked
SetCPU is used to adjust the frequencies.