I have an SD card that i used juopunutbear to s-off with. Now i did obtain s-off but now the phone says blank sd card.
When i try to format it it will show:
Format?
I choose yes but it wont format it. Any ideas of how to fix this?
update
Resolved. Reformatted my sd card through windows 7.
Related
Help,
After i flashed my KAISER i have a problem. The sd card is not recognised anymore. Is there a solution for this problem?
I hope so, otherwise i have a brick
Storage card problem
I always used a 4 gig card, just tried an 512 mb card, and that one was recognised. Strange isn't it?
First, which method did you use to flash your new ROM?
If you used the USB method to flash your new ROM, did you remove your SD card during the flash process?
If you used the SD card method to flash your new ROM, did you do a hard reset with your SD card inserted?
Second, do you have an SD card reader for your computer? I would probably try to verify that the file system and data are intact on your SD card. If you have an SD card reader, you can also use it to reformat your card.
If none of this is helpful, provide some more information to fill in the gap between your microSD card working properly and not showing up on your phone.
Re
I flashed to TPCV5.1 full today. No sd in my phone.
My cars reader in the computer doesn't recognise the sd card either.
Strange thing is , when i use an other 4 gig sd card, the phone still doesn't recognise it, my card reader on my computer does, so why not on my phone.
I had a 2 gig sd card, and put all the data again on it, and it's working.
Stilli have a problem that my phone won't recognise a 4 gig sd card.
So far my story.
Does seem odd. What file system is your 4GB card formatted with? If it shows up as "RAW" or anything, I would definately format it to FAT32.
Edit: I was referring to your "other" 4GB card. I don't think I have any advice for the original one.
I lost my sd card data flashing a rom. Could not mount it even thru recovery. Got a card reader, but it won't format it.
Using Mini Partition Tool to troubleshoot. I am not at a point where it shows three partitions. The main 16gb unallocated, logical. The ext3 unformatted 500mb, primary (think I did that by mistake when trying to recover partition). And a 32mb unallocated, logical. All zero used memory.
I need to get back to one partition allocated, primary. Then I can get sd data back on it and reformat thru recovery.
Again using Mini Partition Wizard
Any help please!
OK,
I got it repartitioned as primary and formatted, bu sd card from pc now.
Hope phone recognizes it.
Will update, if I need further help.
Ken
If you want a good program to format your sd card, try SD Formatter.
Download and install that, plug in your sdcard into your sd card reader and format it.
Choose Full Erase On (if possible) and Resize On. It will format your sdcard to factory default and that means even the ext partition will be gone too.
Well, all transferred. Still won't mount. Says can't mount either of the dev/blocks mmcb1k0p1 and mmcb1k0.
Staus bar says sd card damaged.
?????
musashiken,
Thanks, typing while you posted. Based on my last post should I still do that?
Ken
Yeah I think you should try to reformat again with the program I suggested, as that will full format your sd card.
Once done, put your sd card back to the phone and create ext partition in recovery.
At work now but will be working on it.
Thanks
Ken
musashiken,
Thanks, appreciate all your help
That program worked, and I am back up and running
Ken
Glad it worked for you. My sd card kept giving me problems and I have to use this every few rom flashes.
I have a similar problem. I installed a new 32 gb SDHC card in a CDMA Hero running Cryogenmod. All was working well for about 10 days, then I got an error that no SD card was found. I had the original card and tried to get to the Clockwork recovery, no luck. Finally, through Rom manager, (flash alternate recovery to Ramon, then back to Clockwork, I was able to boot into recovery.
I still cannot format the new SDHC card, through Recovery, Windows 7, or the Panasonic program listed above. The Windows format option sees the card as a FAT 121mb card, so does the above program. Is this new card toast? It came with a lifetime warranty from Kingston, but I am mad that it did not make 2 weeks.
Any help would be greatly appreciated.
Craig
If sdformatter did not work it may be bad.
I always had good luck with it.
Did you have all options set per instructions?
Has anyone ever tried to format their external SD card in their SGT?
I found an "old" 4GB microSD card which is the right size for the tab, but when I install it, I get the message that it's damaged and needs to be formatted.
Now when I format the card, I get the message to enter a security code (or pattern lock) just to be sure, before formatting.
After selecting format, nothing happens! What gives?
Sef_P1000 said:
Has anyone ever tried to format their external SD card in their SGT?
I found an "old" 4GB microSD card which is the right size for the tab, but when I install it, I get the message that it's damaged and needs to be formatted.
Now when I format the card, I get the message to enter a security code (or pattern lock) just to be sure, before formatting.
After selecting format, nothing happens! What gives?
Click to expand...
Click to collapse
What are you expecting to happen? Mount it on your computer and see if its there
Anyhow, I used another device (SE Vivaz) to format the SD Card, it did in fact format it.
Then inserted the card in my SGT. It is now working, but the format card option is now grayed out. Will check with PC connection later.
I'm having issues getting my SD card to work now after S-OFF. When I boot my phone up, I get a notification saying "Blank SD card, SD card is blank or has unsupported file system" When I touch the notification, it says
"Format SD card
Are you sure you want to format the SD card? All data on your card will be lost"
When I select format, it just closes. What do I do? I have tried rebooting but that didn't help.
tanner4137 said:
I'm having issues getting my SD card to work now after S-OFF. When I boot my phone up, I get a notification saying "Blank SD card, SD card is blank or has unsupported file system" When I touch the notification, it says
"Format SD card
Are you sure you want to format the SD card? All data on your card will be lost"
When I select format, it just closes. What do I do? I have tried rebooting but that didn't help.
Click to expand...
Click to collapse
Just do the format on your computer instead.
After copying a recovery from card to pc the phone says the card is blank. What the hell happened and can I get it to read again?