how do i flash my x8 to minicm7 if my current rom is gingerdx
my date code is below 11W28
then how to do it?
i hvnt unlock the bootloader
but now im going to unlock it
after i unlocked and flash the nAa kernel (mean im still stock kernel)
and then wipe data straight and install the minicm7 custom zip??
thomaswoh said:
how do i flash my x8 to minicm7 if my current rom is gingerdx
my date code is below 11W28
then how to do it?
i hvnt unlock the bootloader
but now im going to unlock it
after i unlocked and flash the nAa kernel (mean im still stock kernel)
and then wipe data straight and install the minicm7 custom zip??
Click to expand...
Click to collapse
GOSH...
Why dont you people just search.....
There are instructions on every ROM thread on how to install it! READ
hwooww....careful dude!
read this first!
hit the thanks dude! :laugh::laugh::laugh:
i mean, how do i flash the minicm7 rom from gingerdx!! nt from stock rom!! every custom rom thread no mention any instruction that how to flash from a custom rom!!
Chris95X8 said:
There are instructions on every ROM thread on how to install it! READ
Click to expand...
Click to collapse
i mean, how do i flash the minicm7 rom from gingerdx!! nt from stock rom!! every custom rom thread no mention any instruction that how to flash from a custom rom!!
thomaswoh said:
i mean, how do i flash the minicm7 rom from gingerdx!! nt from stock rom!! every custom rom thread no mention any instruction that how to flash from a custom rom!!
Click to expand...
Click to collapse
First make sure that your phones' bootloader has been unlocked.Then download nAa 11 kernel and MiniCM7.Put the ROM in your SDcard and turn off your phone.Flash nAa 11 kernel.After done flashing kernel,reboot to recovery by pressing back button countinuosly when you see nAa logo.In recovery,do full wipe,wipe cache partition,wipe dalvik cache,flash the ROM and reboot..
Hope I helped you..
And remember to talk in the polite way.Don't use this (!!) sign.People here will treat you well if you behave nicely..
Sent from my Xperia X8
thomaswoh said:
i mean, how do i flash the minicm7 rom from gingerdx!! nt from stock rom!! every custom rom thread no mention any instruction that how to flash from a custom rom!!
Click to expand...
Click to collapse
first, miniCM7 only built on custom kernel, so you've to unlock your bootloader
and then flash the nAa kernel or AlfsCM7 kernel
about flashing from custom rom, its just the same, you go into the recovery and simply flash it with the right kernel
nazz.rule said:
First make sure that your phones' bootloader has been unlocked.Then download nAa 11 kernel and MiniCM7.Put the ROM in your SDcard and turn off your phone.Flash nAa 11 kernel.After done flashing kernel,reboot to recovery by pressing back button countinuosly when you see nAa logo.In recovery,do full wipe,wipe cache partition,wipe dalvik cache,flash the ROM and reboot..
Hope I helped you..
And remember to talk in the polite way.Don't use this (!!) sign.People here will treat you well if you behave nicely..
Sent from my Xperia X8
Click to expand...
Click to collapse
i used that symbol because he did not answer my question properly, btw thanks i will try disuse that symbol
thomaswoh said:
i used that symbol because he did not answer my question properly, btw thanks i will try disuse that symbol
Click to expand...
Click to collapse
So did you managed to flash MiniCM7 on your phone?
Related
At the beginning : this is my first post forgive me any misstake.
Is there a possibilty to flash the official Cyanogenmod 7.1 without unlocking the bootloader and flashing a kernel?
BTW: Is there a good CM9 or other ICS rom for the E15i
( for Ics i would flash the kernel. not for cm 7.1 because GingerXperia is very nice)
Thanks
No you cant flash official cyanogen mod 7.1 without installing custom kernel.
And there is no cm9 rom which can be used daily for x8.
Currently we have two AOSP ICS ROMs troufiniou's which is stoped I think and paul-xxx's. They still habe some bugs and in my opinion they are still not for daily use.
There are some guys that try to make a CM9.
Still just use GingerDx or somethin that is checked from the community!
Thanks
THx for fast reply. I will use GingerXperia. GingerDx works with stock kernel??
I will wait for a stable CM9.
Thank you very much
you can install rom(just rom) with out unloucking boot loader
does someone has experiences with gingerdx and gingerxperia?? which is better?
alimami said:
you can install rom(just rom) with out unloucking boot loader
Click to expand...
Click to collapse
which rom do you mean?? GingerDX?
luisniklas said:
which rom do you mean?? GingerDX?
Click to expand...
Click to collapse
Yes, just flash ZIP from the first post which includees necessary modules.
luisniklas said:
THx for fast reply. I will use GingerXperia. GingerDx works with stock kernel??
I will wait for a stable CM9.
Thank you very much
Click to expand...
Click to collapse
yes,gdx works with stock kernel too
CM9
is it basicly possible to make a cm9 or another ICS for the x8 which works with stock-kernel
whats this: http://chromloop.com/2011/12/how-to...am-sandwich-on-xperia-x8-w8-use-stock-kernel/
I have succesfully unlocked my bootloader...
Now i need a rom which is fully working without bugs..
I have been out of this forum for months and now have no idea what to use
plz suggest me best rom, without bugs
and guides to install the rom
i have not done anything after craking bootloader
so to install a custom and kernel i will need guide, also how to install xrecovery or cwm recovery
how to install and all
plz help
Use Minicm with nAa! Kernel or xperiafan13 Minicm port for alfs kernel both are stable äMR fully working.
For other things tutorials are available just try to search.
Sent from my E15i using XDA Premium App
i use gingerdx v022 with alfs kernel. but its really up to you. becuase what specific thing do you want? performance? gaming?
apart from stability.
alfs icsv7 and cm7 v6 by xperiafan.its really fast!!!
press thanks if i helped !!!
Gingerxperia with nAa kernel....best and fastest !!!
HIT THANKS !!!!
vicky6672 said:
I have succesfully unlocked my bootloader...
Now i need a rom which is fully working without bugs..
I have been out of this forum for months and now have no idea what to use
plz suggest me best rom, without bugs
and guides to install the rom
i have not done anything after craking bootloader
so to install a custom and kernel i will need guide, also how to install xrecovery or cwm recovery
how to install and all
plz help
Click to expand...
Click to collapse
Alfs kernel or nAa kernel are pretty good. GingerDx is my favourite ROM.
Well your bootloader is unlocked so either of the kernels have CWM recovery installed (xRecovery is pretty much obsolete). "craking bootloader" is legal to do this. An advantage of having Android. Most phones come these days with there bootloaders unlocked.
This is nAa description of how to install his kernel found on his thread: http://forum.xda-developers.com/showthread.php?t=1350484
Flash tool:
http://forum.xda-developers.com/showthread.php?t=986697
This is GingerDx thread description to install Rom is in here:
http://forum.xda-developers.com/showthread.php?t=1188486
Hit the thanks button!!!
bahmonkeys said:
Alfs kernel or nAa kernel are pretty good. GingerDx is my favourite ROM.
Well your bootloader is unlocked so either of the kernels have CWM recovery installed (xRecovery is pretty much obsolete). "craking bootloader" is legal to do this. An advantage of having Android. Most phones come these days with there bootloaders unlocked.
This is nAa description of how to install his kernel found on his thread: http://forum.xda-developers.com/showthread.php?t=1350484
Flash tool:
http://forum.xda-developers.com/showthread.php?t=986697
This is GingerDx thread description to install Rom is in here:
http://forum.xda-developers.com/showthread.php?t=1188486
Hit the thanks button!!!
Click to expand...
Click to collapse
I have installed :FroyoPro:- v2.4 Android 2.2+3 with stock kernel and dual recovery using a x8 tool box.. hw do i install nAn kernel, it says required MiniCM or gingerbread roms, any help
vicky6672 said:
I have installed :FroyoPro:- v2.4 Android 2.2+3 with stock kernel and dual recovery using a x8 tool box.. hw do i install nAn kernel, it says required MiniCM or gingerbread roms, any help
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1350484
it mean :
- Download the kernel .ftf file and move it to Flashtool\firmwares so that Flashtool can pick it up
- Flash the kernel via Flashtool (turn off phone, press back button, connect your usb phone cable to computer, see led in your phone blink green, then release back button. flashing should be running.. wait until finished..
- unplug your usb phone cable
- turn on your phone.
I just want to know that how can I flash nAa kernel on my x8,
m on stock kernel with froyo pro ROM. do i need any other ROM to flash it or i can simply flash it...!!!
vicky6672 said:
I just want to know that how can I flash nAa kernel on my x8,
m on stock kernel with froyo pro ROM. do i need any other ROM to flash it or i can simply flash it...!!!
Click to expand...
Click to collapse
hello vicky
in order to flash kernels you need to unlock your bootloader....
You may search the forum for unlocking the bootloader.
But keep extra caution in the process of unlocking bootloader because you may brick your phone.
Press thanks if I helped.....
harshitgroup said:
hello vicky
in order to flash kernels you need to unlock your bootloader....
You may search the forum for unlocking the bootloader.
But keep extra caution in the process of unlocking bootloader because you may brick your phone.
Press thanks if I helped.....
Click to expand...
Click to collapse
I have unlocked my bootloader, i just want to know that can I flash kernel with any rom installed, I have Froyopro, so can i flash nAa kernel, I am in stock kernek now
Froyopro propably won't start on nAa kernel and it will stop after boot animation/kernel animation. You should try miniCM7 (and based on it ROMs) versions 2.1.8 and 2.1.9 for kernels nAa 10 and 11. If You would like older versions of MiniCM on kernels nAa 10 and 11 You will have to install also new graphic drivers (in CWM), cause without them performance will be very low. nAa 09 suits MiniCM7 ROMs f.e. 2.1.6 and 2.1.7. So there's a plenty of options
Bolussimo said:
Froyopro propably won't start on nAa kernel and it will stop after boot animation/kernel animation. You should try miniCM7 (and based on it ROMs) versions 2.1.8 and 2.1.9 for kernels nAa 10 and 11. If You would like older versions of MiniCM on kernels nAa 10 and 11 You will have to install also new graphic drivers (in CWM), cause without them performance will be very low. nAa 09 suits MiniCM7 ROMs f.e. 2.1.6 and 2.1.7. So there's a plenty of options
Click to expand...
Click to collapse
But can i install MiniCM without nAa kernel, MinICM 7 requires nAa kernel..m confused now. do first i need to flash kernel or minicm 7,
vicky6672 said:
But can i install MiniCM without nAa kernel, MinICM 7 requires nAa kernel..m confused now. do first i need to flash kernel or minicm 7,
Click to expand...
Click to collapse
If you want to install MiniCM7, you need aNa kernel. unlocked bootloader=> flash aNa kernel=> install Roms!
Check the date of manufacturing first before unlocked bootloader, otherwise, it may break your phone!
As You can see at MiniCM's google page: http://code.google.com/p/minicm/ versions 6 supports stock SE kernel. If You want miniCM7 - it's neccesary to flash nAa kernel.
1). Download ROM and copy it on SD.
2). Flash nAa kernel.
3). Go into CWM recovery, which is built-in in nAa kernel and do full wipe.
4). In CWM Install custom.zip from SD card
If You install CWM7 without nAa kernel propably it won't start at all. And propably You will have to use SEUS to back to stock SE ROM, cause I think there will be no option to get into recovery
hi i was following this video tutorial http://www.youtube.com/watch?v=Sb9e99VT3Os and everything was going fine. but when i click on plugin option of flashtool then there is nothing in that menu option. do i need to download any particular plug-ins to unlock bootloader. i m attaching a pic plz look at this whats happening with flashtool. before it i succesfully managed to flash stock rom with flashtool. help me plz i want to unlock bootloader and install naa kernel. plz help me
harjot47 said:
hi i was following this video tutorial http://www.youtube.com/watch?v=Sb9e99VT3Os and everything was going fine. but when i click on plugin option of flashtool then there is nothing in that menu option. do i need to download any particular plug-ins to unlock bootloader. i m attaching a pic plz look at this whats happening with flashtool. before it i succesfully managed to flash stock rom with flashtool. help me plz i want to unlock bootloader and install naa kernel. plz help me
Click to expand...
Click to collapse
You may need to take a look at this thread before unlocking your bl
http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
press thanks if I helped
harshitgroup said:
You may need to take a look at this thread before unlocking your bl
http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
press thanks if I helped
Click to expand...
Click to collapse
thanx har**** ..... will you tell me which rom and kernel u r using now and howz the performance ?
thanx brother ... with ur help i have succesfuly unlocked bootloader and i installed nAa kernel . when i went to revoery to install rom lyk i have escha arch 5.1 ,, it says baseband is not latest, but i think i have latest baseband it is baseband version
M76XX-TSNCJOLYM-53404015....... do i need to change baseband or do i need another rom ? i installed kernel nAa11 .... plz tell me any custom rom which is best for kernel nAa 11. give me link . also one qusetion more do i need to unlock bootlaoder again if i flash again stock rom 2.1 with flashtool ? plz help me
Kernel nAa is for MiniCM7 ROMs (and based-on ROMs). So You can choose between f.eg. original MiniCM7 2.1.9, iROM v005, GingerXperiaRay.
The ROM You mentioned is for ALFS kernel
If You unlocked Your bootloader it will be unlocked, even if You flash stock ROM. But if You do so You will have to change kernel and root Your phone again, cause stock ROM works only on stock kernel
Bolussimo said:
Kernel nAa is for MiniCM7 ROMs (and based-on ROMs). So You can choose between f.eg. original MiniCM7 2.1.9, iROM v005, GingerXperiaRay.
The ROM You mentioned is for ALFS kernel
If You unlocked Your bootloader it will be unlocked, even if You flash stock ROM. But if You do so You will have to change kernel and root Your phone again, cause stock ROM works only on stock kernel
Click to expand...
Click to collapse
thanx bolussimo ....
harjot47 said:
thanx har**** ..... will you tell me which rom and kernel u r using now and howz the performance ?
Click to expand...
Click to collapse
I personally use fire droid
http://forum.xda-developers.com/showthread.php?t=1495802
with alfs07 ICS kernel
http://forum.xda-developers.com/showthread.php?t=1340861
Its an awsome combination...
Games ke liye bhi mast hai
Press thanks if I helped.
I have Sony ericsson w8 and I have flash it with x8 kernal (2.0.0.A.53) and installed GingerDx. Now I am putting Jelly bean but the naA jb kernal or Ics kernal is showing 'flashing aborted' while flashing . Neither ICS nor JB is installing on my X8. Now i am running gingerDx..
So please help me in installing JB or ICS custom kernal with full procedure.
Thankyou....
Easy method,
1. flash nAa jb 05
2. flash any jb rom u want as mentioned in thread
3.flash nAa jb 06
Or you can workaround by editing the rom zip but above method is easier
Happy Flashing JB
work hard, play hard
help getting links..
Gogeta said:
Easy method,
1. flash nAa jb 05
2. flash any jb rom u want as mentioned in thread
3.flash nAa jb 06
Or you can workaround by editing the rom zip but above method is easier
Happy Flashing JB
work hard, play hard
Click to expand...
Click to collapse
thank so much for yr suggestion..
but can u give ne those right links of kernal and rom
and please tell me that can i flash it on X8 kernal which i have already flashed...
lucky930 said:
thank so much for yr suggestion..
but can u give ne those right links of kernal and rom
and please tell me that can i flash it on X8 kernal which i have already flashed...
Click to expand...
Click to collapse
All jb kernels can be downloaded from same page mentioned in the thread ..
Rom, whichever you like, you can flash kernel again & again
work hard, play hard
Firstly...have u unlocked your phone's bootloader? Jelly bean or ICS on X8/W8 works only a custom kernel....which u can install if u have a unlocked bootloader....if your bootloader is not unlocked u cannot flash any other kernel.....
Help about stock
Gogeta said:
All jb kernels can be downloaded from same page mentioned in the thread ..
Rom, whichever you like, you can flash kernel again & again
work hard, play hard
Click to expand...
Click to collapse
Bro !! just tell me that its cumpulsury that i have to flash jb kernal while only on stock rom?? b'coz i have soft bricked my sony w8 twice.....
lucky930 said:
Bro !! just tell me that its cumpulsury that i have to flash jb kernal while only on stock rom?? b'coz i have soft bricked my sony w8 twice.....
Click to expand...
Click to collapse
Soft brick? Is your bootloader unlocked?
work hard, play hard
Not now bricked
Gogeta said:
Soft brick? Is your bootloader unlocked?
work hard, play hard
Click to expand...
Click to collapse
No bro not now. I have GingerDx custom rom and is working fine. I mean I have soft bricked my phone a month ago. I just asking that its cumpolsory to have on stock kernal while flashing jb kernal?
lucky930 said:
No bro not now. I have GingerDx custom rom and is working fine. I mean I have soft bricked my phone a month ago. I just asking that its cumpolsory to have on stock kernal while flashing jb kernal?
Click to expand...
Click to collapse
If bootloader is not unlocked, you can't flash custom kernel
No custom kernel. No jelly bean
work hard, play hard
about bootloader
killerassassin said:
Firstly...have u unlocked your phone's bootloader? Jelly bean or ICS on X8/W8 works only a custom kernel....which u can install if u have a unlocked bootloader....if your bootloader is not unlocked u cannot flash any other kernel.....
Click to expand...
Click to collapse
no! no! I have bootloader unlocked thats why i have installed gingerdx and flash x8 kernal.
what is sign of unlocked bootloader???
lucky930 said:
no! no! I have bootloader unlocked thats why i have installed gingerdx and flash x8 kernal.
what is sign of unlocked bootloader???
Click to expand...
Click to collapse
use s1tool to check bl status. if you're flashing naa's jb kernel the first time you need to format data cache system apart from the wipes, then flash a compatible rom.
cascabel said:
use s1tool to check bl status. if you're flashing naa's jb kernel the first time you need to format data cache system apart from the wipes, then flash a compatible rom.
Click to expand...
Click to collapse
i have to format this three before flash jb kernal or after flashing?????
lucky930 said:
i have to format this three before flash jb kernal or after flashing?????
Click to expand...
Click to collapse
after flashing kernel but before flashing rom.
Boot Loader
cascabel said:
after flashing kernel but before flashing rom.
Click to expand...
Click to collapse
thank..
i have 11W26 ...
is it safe to unlock bootloader??
I am in doubt that i have flashed x8 kernal and installed GB and after that i need to unlock my bootloader????:-[
lucky930 said:
thank..
i have 11W26 ...
is it safe to unlock bootloader??
I am in doubt that i have flashed x8 kernal and installed GB and after that i need to unlock my bootloader????:-[
Click to expand...
Click to collapse
Yes its safe to unlock
work hard, play hard
Can my phone sony ericsson has already bootloader unlocked. is it possible??
no, sony ericsson hadn't been that much of "friendly" to AOSP, you need to check it first with s1tool then if your mfg date is 11w29 below you can unlock it
Eren Jaeger said:
no, sony ericsson hadn't been that much of "friendly" to AOSP, you need to check it first with s1tool then if your mfg date is 11w29 below you can unlock it
Click to expand...
Click to collapse
yippp i have unlocked my bootloader successfully....its very easy now iam going to flash jb kernal ...
thanks to all sm and xda members...
Low memory
I have installed jb mini but it is using full ram and is working toooo slow..
I had increase CPU freq. but nothing happens ...
please help or I have 2 move on other ROM....:-'(
if you want more RAM install GB roms not JB