Database Develop

[Q] [ROM] Criskelo's ICS V7 install question

Hi Guys,
sorry for this noobie question but I'm quite new to android.
I've passed hours reading the forum about roms, kernels etc...but there are so much information for my little brain that now I don't know what to do...
So I'm on a GB 2.3.6 XXLC1 stock rom, with Franco's kernel 3.x version and I'd like to install Crisleko's ICS V7 ROM on my device but i'm not able to know how really to install it on the phone...the phone is full rooted. I wouldn't like to brick my note, so here's the reason of my question :
In my case, which is the most efficient way to install this rom ?
Sorry if this question has already been posted, but within all answer, I don't know what to do....
Thanks a lot for yout support.

You can flash the rom also directly from CWM. The reboot into recovery and select : _install zip from sd card _chose zip from sd card _select the criskeloRom zip _click yes ...... Flash it from Cwm i raccomend the Cwm app.from chainfire : _copy the rom to internal sd _start Cwm manager _ chose flash update _select criskelo Rom _click on yes...

I'm also afraid to hardbrick my device, and dude, i bought it 5 days ago lol
I had a Galaxy Nexus and flashed, installed new kernels, rooted, did everything.
I asked few ppl here and they said we should wait till the official ICS comes, it will take 1 or 2 weeks, better than hardbrick my note <3

Not quite because most bricks actually happen because of the stock ICS ROM.
Flash whatever you want, just remember to go from GB and not stock ICS, and remember - never do a factory reset while on stock ICS kernel.
If you need to do a factory reset, just flash a GB kernel, or flash GB stock with Odin, then wipe and flash ICS back.
Also, CM9 highly recommended

Ok guys, thanks a lot for answers. I've tryed to flash this rom and everything worked fine except the fact I'm a noobie and restore with TB Apps and user datas ^^. Now i'll know that user data don't have to be restored !
So I'm came back to my GB rom...
Maybe one more question :
I'll installed a new rom, I think i've understood what to do and what not to do with wipe from ICS roms but after wipe data / factory resest ans dalvik cache, is there a way to have a connection wizard software so a to set everything up because I had no data connection anymore ?
Thank a lot for your support

Hello Pascal-T,
I think I'm in the exact same position as you (except that I'm not rooted yet), but i'm also on GB LC1 and I want to go to Crisleko's ICS V7 ROM !
As I understood, you have directly install Crisleko's ICS V7 ROM on your rooted GB LC1 ? So it's not needed to install an other lower ICS ROM before going to the LQ3 of Criskelo ?
If yes this is great, then I just have to root my GB LC1, do a backup up with TB, and then I can follow Crisleko's ICS V7 ROM topic ? (At the begining I though I should first flash a stock ICM ROM but It seems to be THE THING TO AVOID).
If someone can just confirm these informations, that would be perfect
Thank you !

Well this seems like a perfect place for me to post Ive asked around, And searched a lot, But still cant figure this out. I dont wanna sound like a noob ( I am to the Note )
Ive been flashing and modding for years, Samsungs, HTC's, Sony Ericssons so I know what to do.
The thing is, All the threads I read about the bricking, and how to avoid it, Just keep forever linking me to different threads, and i end up back at the start. I dont have the Note yet (should be arriving any time) Im thinking of Only rooting for now as im not confident enough to flash without errors. But when i do, what i need to do is, Use ODIN to revert to GB (Unless it comes with GB) then:
1, Flash CF-ROOT kernel
2, Flash abyss safe kernel in cwm
3, reboot back into cwm
4, Do a full wipe
5, Install a ROM
Is that right ? I like the look of PA but would like to try a modded stock ROM to start with, So any recommendations ?
TIA
A-D

[Q] About flashing paranoid ROM

Hi there,
I recently bought a new GNOTE and i want to flash it for paranoid ROM (or another ROM ICS based).It was on GB XXLA6 and i found it was impossible to root / unlock so i used this method :
- Flash N7000OXAKJ4_DBT with ODIN
- Zerglin rush CF-ROOT
- Flash N7000OXELA1_SER NO WIPE with ODIN mobile (EVEROOT, SU, MOBILE ODIN, CWM MANAGER)
- Flash Abyssnote 4.2 Kernel
Otherwise i needed to unlock my SIM so I used Galaxy_S unlock.
Everything is ok now but i'm on gingerbread... And I want a new ICS ROM ! I had a HTC Sensation and I flashed it lot of time easily...
I've read every FAQ I found but I've head a lot about brick so I'm a little bit afraid...
"DON'T flash FROM ANY SAMSUNG ICS OR ROMS BASED ON SAMSUNG KERNELS (my CM9, AOSP, etc)"
Humm I'm confused, does it means that I must not flash a ROM with samsung stock KERNEL or FROM a samsung stock kernel ??
Does it increase the binary counter / cause yellow triangle ?
I someone can help myself... Can I safely flash this ROM with my phone spec ?
Sorry for the noob question, and for my bad english and thanks for reading/answering.

you are already on GB and on abyssnote42, so it's ok to data wipe and flash (that's the safest you can be).
of course, there is ALWAYS a risk. the choice is yours.
and no, it does not cause increase in binary counter or yellow triangle since you will be doing it from CWM.

blinkz01 said:
Hi there,
I recently bought a new GNOTE and i want to flash it for paranoid ROM (or another ROM ICS based).It was on GB XXLA6 and i found it was impossible to root / unlock so i used this method :
- Flash N7000OXAKJ4_DBT with ODIN
- Zerglin rush CF-ROOT
- Flash N7000OXELA1_SER NO WIPE with ODIN mobile (EVEROOT, SU, MOBILE ODIN, CWM MANAGER)
- Flash Abyssnote 4.2 Kernel
Otherwise i needed to unlock my SIM so I used Galaxy_S unlock.
Everything is ok now but i'm on gingerbread... And I want a new ICS ROM ! I had a HTC Sensation and I flashed it lot of time easily...
I've read every FAQ I found but I've head a lot about brick so I'm a little bit afraid...
"DON'T flash FROM ANY SAMSUNG ICS OR ROMS BASED ON SAMSUNG KERNELS (my CM9, AOSP, etc)"
Humm I'm confused, does it means that I must not flash a ROM with samsung stock KERNEL or FROM a samsung stock kernel ??
Does it increase the binary counter / cause yellow triangle ?
I someone can help myself... Can I safely flash this ROM with my phone spec ?
Sorry for the noob question, and for my bad english and thanks for reading/answering.
Click to expand...
Click to collapse
Since you are on a rooted GB rom you can follow the instruction on the Paranoid website
Install Rom: http://d-h.st/lU1
Install HYBRID Gapps: http://4ndr01d.com/drcmda/common/
Wipe caches, factory reset is a must if you're coming from another rom than CM9
If your statusbar is gone after the first reboot: longpress Powerbutton > Toggle Statusbar
Reboot and edit your Apps Dpi under Settings/Paranoid Settings/P.A.D. Hold the powerbutton to see the new fullscreen-togglebutton
I flashed this rom from a rooted GB rom without problem.

Thanks for your help I will keep you update when I flash my phone
Sent from my GT-N7000 using XDA

Hey,
Flashing done and work perfectly ! Thanks for your answers.
Can I flash other ICS custom ROM from paranoid or I need to downgrade to GB ?
Don't know if i understood but the only way to flash safely is not to use samsung non rooted stock rom with samsung stock kernel on ICS ?

[Q] Is it worth it?

hey guys, I was thinking to root my note n7000 running android 4.0.4
I read many threads and guides but could not understand the way to do it...
some says "this way is better and safe" and some says "that one is risky, try another"
Actually I want to root because of two reasons
1. Want to install a beautiful (good looking) ROM like MIUI (cause installing themes makes my note slow, toooo slow and then it crashes too)
2. I want some apps that require root (like an app to remove permissions that apps ask but they don't actually need)
So I wanna ask you guys, is it worth rooting?
Is it possible to install MIUI in note OR is there any other better alternative to MIUI
I don't really care about the warranty as long as I can understand the way to root my phone safely so I won't brick it (though I even read in some threads that you can root without going against the warranty conditions)
I also saw the one-click root setup that needs a PC, download the rar, connect phone, USB-debugging and start the file in PC, is it safe and not outdated or patched by the android 4.0.4
So guys, suggest me should I root or just wait for JB update for the note
and if you suggest that I should root then can you please :angel: point me in a direction, to a good and easy to follow guide for newbies...
:highfive:

i rooted the note as soon as i got it..
its very simple to root a 4.0.4 these days and safe as well..
check you rom build number and download the kernel corresponding to your rom
http://forum.xda-developers.com/showthread.php?t=1901191
then place the zip file in the ext SD.. boot into recovery and update from external SD and point to the Zip file.. install and done..
Rooted, safe kernel and CWM for installing new roms as well...

nokiamodeln91 said:
i rooted the note as soon as i got it..
its very simple to root a 4.0.4 these days and safe as well..
check you rom build number and download the kernel corresponding to your rom
http://forum.xda-developers.com/showthread.php?t=1901191
then place the zip file in the ext SD.. boot into recovery and update from external SD and point to the Zip file.. install and done..
Rooted, safe kernel and CWM for installing new roms as well...
Click to expand...
Click to collapse
yes.. it is easy and safe if you fully understand and follow every instruction. Good Luck.. "How can a tree lives without its root.. hahahaha"

It's definitely worth it if you're thinking about it, it opens the doors to getting so much more out of your device. Follow nokiamodeln91 suggestions and you'll be fine.
Sent from my GT-N7000 using xda premium

nokiamodeln91 said:
i rooted the note as soon as i got it..
its very simple to root a 4.0.4 these days and safe as well..
check you rom build number and download the kernel corresponding to your rom
http://forum.xda-developers.com/showthread.php?t=1901191
then place the zip file in the ext SD.. boot into recovery and update from external SD and point to the Zip file.. install and done..
Rooted, safe kernel and CWM for installing new roms as well...
Click to expand...
Click to collapse
thanks man for the reply,
I understand the later part that transfering the zip files to external SD and install from it
but I fail to unerstand which zip file to download
my "build number" is "IMM76D.DDLR9"
and "baseband version" is "N7000DDLRR1"
also I wanted to ask if this the same CWM.zip method as mentioned in this THREAD cause they are saying that following this method will result in a brick
one last thing, if you could also make my doubts clear
rooting is needed to access to system files so that we can install and use apps which require ROOT
but I do not know about kernel and CWM...
once again many many thanks for the reply...:victory::angel:

Use ddlr9
cwm.zip can result in a brick
yes root is needed to access system
to install. mods, tweaks, different roms etc etc. etc
Sent from my GT-N7000 using xda premium
---------- Post added at 04:59 PM ---------- Previous post was at 04:56 PM ----------
kernel is a universal name. You can look it up anywhere
cwm is an advanced recovery that can perform many tasks as compared to stock recovery and is embedded in the kernel for note. when you change kernel your recovery will change as per what the dev included.
cwm is aso required to install custom roms
Sent from my GT-N7000 using xda premium

Considering your requirements you should root.
Your only concern is that you may not be able to do it properly.
Rooting is now a cake walk. Just follow Dr ketans thread
Sent from my GT-N7000 using xda app-developers app

anilisanil said:
Considering your requirements you should root.
Your only concern is that you may not be able to do it properly.
Rooting is now a cake walk. Just follow Dr ketans thread
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
yeah that's what I thought
I would rather give it to some other person who knows the process of rooting than doing it myself, looks very confusing to me :silly:

okay done!
so I have finally rooted and flashed my kernel...
I followed this guide on youtube
youtube[dot]com/watch?v=fIV84TwdPdY
basically, it told me to download "Root_SuperSU.0.95.Only-signed.zip" and update from the zip and I followed
then I got the supersu app in my note and my note was rooted then following the guide again, I installed "mobile odin pro" from the play store, downloaded "speedmod-kernel-n7000-ics-k3-15-CWM.zip" and using mobile odin i flashed it
so now my phone's "about" page is like this
View attachment 1653682
so I just wanted to ask whether this kernel is safe or not, do I have to still flash something else cause I read that most of the ICS kernels are affected with the "brick" bug and I was on android 4.0.4 when I rooted and flashed my phone..,
and what about flashing roms...,

It's only stock ics roms that are unsafe. Speedmod is safe, also worth checking out is phillz kernel which is as close to stock as you can get but with the mmc_cap_erase command disabled.
Since you're on a safe kernel now you can flash most roms straight away, although if flashing cm based rom like paranoid or cm10 you usually need to flash a cm based kernel first, then boot into recovery and flash the cm rom from there. All first posts will contain necessary flashing procedures. You'll get the hang of it and if you need help continue asking.
Sent from my GT-N7000 using xda premium

further query
first, thank you SpyderTracks for your quick response, I actually slept last night cause I didn't think that I would get an answer so fast :angel:
now, what rom you people suggest me to install as I am AGAIN confused to choose the rom
and as SpyderTracks said to install CM roms i need CM kernel too, so I suppose there will be again many more choices, so would anyone tell me which one is the easiest and simplest...
I actually looked at many roms
like MIUI, CyanogenMod, some jellybean roms like JellyBam
so from where should I start to understand this rooting things
P.S I have got mobile odin pro and rom manager from store, if they can help
EDIT
please help me out, I did something wrong
i downloaded and installed mobile odin pro
flashed latest CWM
and then I downloaded "RocketMIUI v8 - MIUI 2.10.19 - SNote running!!! - multilang" and wenti into recovery vol. up+power+home
first of all I used "wipe data/factory reset" option and then "wipe cache partition" and then finally I used "install zip from sdcard"
update was succesfully done but now when I start my note, it gets to samsung logo normally then the welcome page of samsung shows up and there i'm getting an error "unfortunately, phone has stopped" and now I cannot do anyting
PLEASE help O

GravityDead said:
first, thank you SpyderTracks for your quick response, I actually slept last night cause I didn't think that I would get an answer so fast :angel:
now, what rom you people suggest me to install as I am AGAIN confused to choose the rom
and as SpyderTracks said to install CM roms i need CM kernel too, so I suppose there will be again many more choices, so would anyone tell me which one is the easiest and simplest...
I actually looked at many roms
like MIUI, CyanogenMod, some jellybean roms like JellyBam
so from where should I start to understand this rooting things
P.S I have got mobile odin pro and rom manager from store, if they can help
EDIT
please help me out, I did something wrong
i downloaded and installed mobile odin pro
flashed latest CWM
and then I downloaded "RocketMIUI v8 - MIUI 2.10.19 - SNote running!!! - multilang" and wenti into recovery vol. up+power+home
first of all I used "wipe data/factory reset" option and then "wipe cache partition" and then finally I used "install zip from sdcard"
update was succesfully done but now when I start my note, it gets to samsung logo normally then the welcome page of samsung shows up and there i'm getting an error "unfortunately, phone has stopped" and now I cannot do anyting
PLEASE help O
Click to expand...
Click to collapse
Go into recovery, wipe cache, dalvik and data and try a reboot, should clear the fc's.
Sent from my GT-N7000 using xda premium

more
SpyderTracks said:
Go into recovery, wipe cache, dalvik and data and try a reboot, should clear the fc's.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
oh thank you one more time spydertracks
i did what you said but nothing's helping
then I came across shiro_hydracore v7 kernel, i flashed it but then again tried what you said but still no help
so is there anything I can do or my note is nothing but a paper weight now
UPDATE -
i wanna thank you everyone (from the heart) who bothered to reply in my thread
i'm done, installed jellybam, running smoothly
but even then, any new suggestions for future :angel:

GravityDead said:
oh thank you one more time spydertracks
i did what you said but nothing's helping
then I came across shiro_hydracore v7 kernel, i flashed it but then again tried what you said but still no help
so is there anything I can do or my note is nothing but a paper weight now
UPDATE -
i wanna thank you everyone (from the heart) who bothered to reply in my thread
i'm done, installed jellybam, running smoothly
but even then, any new suggestions for future :angel:
Click to expand...
Click to collapse
It's just a flashing error or kernel issue, don't worry just yet. Reflash the rom, it comes provided with hydracore kernel. Leave it with that kernel, remember to do 3 wipes after flash, then try reboot.
Sent from my GT-N7000 using xda premium

[Q] Just beginner want to update my ROM

Hi,
I am very new here and very beginner as well, so forgive me for my bad English and my stupid questions i am just like to get more fun from my note that has below installed s/w info
Note N7000, ICS 4.0.3, Baseband ver. N7000XXLPT, Kernal ver. 3.0.15-N7000JPLPD-CL643396 [email protected] #3, Build nr. IML74K.JPLPD
I would like to root and upgrade my ROM to Jellybean to get the most updated featured in my note, so kindly help me by give me the right S/W links and steps that i have to follow.
I am really appreciate you kind help in this such great site
Best Regards
Ihab

ihab soliman said:
Hi,
I am very new here and very beginner as well, so forgive me for my bad English and my stupid questions i am just like to get more fun from my note that has below installed s/w info
Note N7000, ICS 4.0.3, Baseband ver. N7000XXLPT, Kernal ver. 3.0.15-N7000JPLPD-CL643396 [email protected] #3, Build nr. IML74K.JPLPD
I would like to root and upgrade my ROM to Jellybean to get the most updated featured in my note, so kindly help me by give me the right S/W links and steps that i have to follow.
I am really appreciate you kind help in this such great site
Best Regards
Ihab
Click to expand...
Click to collapse
Download Philz kernel from here (there should be one for your version (LPT) otherwise get one just as close (LPx . 4.0.x)
http://forum.xda-developers.com/showthread.php?t=1901191
once done, stick it on your sd card (internal preferably)
Now, download a JB ROM of your choice and place that on your sd card too (same place / folder and philz kernel (so its easier to find))
Now, flash philz kernel in recovery (stock or cwm) and then reboot recovery (under advanced)
from here you can continue to do all the wipes (or go to philz settings and choose 'clean for new rom') and then proceed to flash the JB ROM of your choice.
Notes to consider:
1. Not all ROM installations are the same, so be sure to double check the instructions from your chosen ROMs thread!
2. Wiping data will lose all your apps and data (not media, pics, music etc) So be sure to have a backup - Titanium is a good app for this, but requires root.
3. If you cannot find philz kernel for your version (LPT) and decide to use another version instead, your ROM may not boot, So if you need root to back up your stuff before the update, I would suggest to try another rooting method such as ExynosExploit.
4. Dont be overwhelmed by everything, it looks daunting, but once you know the procedure its really simple

Or use PC odin to install JB 4.1.2 XXLSZ.. no need to root..

please confirm
feartheanonymity said:
Download Philz kernel from here (there should be one for your version (LPT) otherwise get one just as close (LPx . 4.0.x)
http://forum.xda-developers.com/showthread.php?t=1901191
once done, stick it on your sd card (internal preferably)
Now, download a JB ROM of your choice and place that on your sd card too (same place / folder and philz kernel (so its easier to find))
Now, flash philz kernel in recovery (stock or cwm) and then reboot recovery (under advanced)
from here you can continue to do all the wipes (or go to philz settings and choose 'clean for new rom') and then proceed to flash the JB ROM of your choice.
Notes to consider:
1. Not all ROM installations are the same, so be sure to double check the instructions from your chosen ROMs thread!
2. Wiping data will lose all your apps and data (not media, pics, music etc) So be sure to have a backup - Titanium is a good app for this, but requires root.
3. If you cannot find philz kernel for your version (LPT) and decide to use another version instead, your ROM may not boot, So if you need root to back up your stuff before the update, I would suggest to try another rooting method such as ExynosExploit.
4. Dont be overwhelmed by everything, it looks daunting, but once you know the procedure its really simple
Click to expand...
Click to collapse
Thank you for your quick and detailed explaination and please confirm that the Philz kernal (PhilZ-cwm6-XXLPY-XEN-2.7-signed) that i downloaded from above link is suitable for my device also please send me more info about ExynosExploit rooting method.
thank you
Ihab

I need more help please
nokiamodeln91 said:
Or use PC odin to install JB 4.1.2 XXLSZ.. no need to root..
Click to expand...
Click to collapse
Thank you for your quick response and kindly can you please to send me the link that i can download JB 4.1.2 XXLSZ?
Regards
Ihab

Samfirmware.com

Read this thread, you will find all required information, download link as well installation guide
http://forum.xda-developers.com/showthread.php?t=1424997

Thank you
dr.ketan said:
Read this thread, you will find all required information, download link as well installation guide
http://forum.xda-developers.com/showthread.php?t=1424997
Click to expand...
Click to collapse
Thanks dr:Ketan. i am really appreciate your quick response and kind valuable link that you give.
Regards
Ihab

[Q] Changing ROM plus rooting plus other apps

Good day. My name is Renoux. I have a South African Samsung Galaxy Note GT-N7000 on the MTN network but currently using Vodacom Simcard.
I am so new to flashing and rooting and there is just TOO much info to go through on this site and also any other. I am even more clueless now than I was before after reading about it.
I would like to do the following:
1) Backup everything on my phone (will the app I'm going to use still be on my phone after reset? do I need to download again and my backup file will automatically be added? Will I lose some data?)
2) I want to use a ROM called Paranoid Android. the one I have is pa_n7000-3.60-11JUN2013-053741.zip
3) How do I uninstall my current OS? I am using Ice Cream Sandwich version 4.0.4 with Baseband version N7000XXLRB.
PDA: N7000XXLRI
PHONE: N7000XXLRB
CSC: N7000OJVLR3
Build info: Wed Jul 11 19:41:13 KST 2012
4) What are the programs that I need to download? for both my PC and the phone to get this done? could you maybe include links please?
5) Do I root after or before installing the new ROM? using what? how?
basically, delete everything on my phone, after backing up the most important stuff, delete ICS, install paranoid android and then root it for full use.
Thanks.

If you want to backup everything like app+data then you can use titanium backup pro but you need root for that.. I usually provide links but as you are too lazy to read what already exists and will be there till next year for sure (just saying).. Search for philz kernel on google for n7000 and download .zip for kernel corresponding to your rom.. Put it on ext sd.. Press volume up+power+home button and you will get stock recovery from there use the volume down key to choose install zip from ext sd and press power button to select. Once done you will have brickbug safe kernel and root. Now you can install titanium backup pro and backup all the apps+data (only non system apps recommended). Now once you are done go to paranoid rom thread and read the instructions there for how to install.. If you want to install ics or even jb for any other country you can do that using pc odin or mobile odin.. Search for dr ketans stock rom n7000 in google and you will get all the stock rom to download with how to.. If you ever install stock rom again you will have to root again using the same method as mentioned above to be able to use tbp and restore apps with or without data..
Sent from my GT-N7000 using xda app-developers app

Here is how to do it.
Root your phone. There are a lot off info on YouTube on hire to do. Here is one example: http://goo.gl/UWgl6
When rooting, you do not lose any information on you phone, by when changing rom you do. Therefore, use titanium backup pro (yes, buy the pro version) to backup your data.
When rooted, it is also very easy to install a new rom. My suggestion is the Stunner rom. How to install a rom is also very simple. Here is a video to show you hire to do it: http://goo.gl/Df72h
Good luck!
Sent by Tapatalk from my Samsung Galaxy Note.

treacherous_hawk said:
If you want to backup everything like app+data then you can use titanium backup pro but you need root for that.. I usually provide links but as you are too lazy to read what already exists and will be there till next year for sure (just saying).. Search for philz kernel on google for n7000 and download .zip for kernel corresponding to your rom.. Put it on ext sd.. Press volume up+power+home button and you will get stock recovery from there use the volume down key to choose install zip from ext sd and press power button to select. Once done you will have brickbug safe kernel and root. Now you can install titanium backup pro and backup all the apps+data (only non system apps recommended). Now once you are done go to paranoid rom thread and read the instructions there for how to install.. If you want to install ics or even jb for any other country you can do that using pc odin or mobile odin.. Search for dr ketans stock rom n7000 in google and you will get all the stock rom to download with how to.. If you ever install stock rom again you will have to root again using the same method as mentioned above to be able to use tbp and restore apps with or without data..
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your help. But i want to know, which one do i download? There is more than one philz kernel and im not sure which to download for my phone? Sorry for being an idiot.

RenouxMarais said:
Thanks for your help. But i want to know, which one do i download? There is more than one philz kernel and im not sure which to download for my phone? Sorry for being an idiot.
Click to expand...
Click to collapse
Your PDA: N7000XXLRI
Philz ICS kernels: http://www.mediafire.com/?3ale6m9q6b6a3
Original topic: http://forum.xda-developers.com/showthread.php?t=1901191
Find the one with LRI at the end.

thank you all for your help. got my phone rooted using cwm adn everything is backed up so this weekend im going to install a nice custom rom for myself.
and for the final question, how do i close this thread?

RenouxMarais said:
thank you all for your help. got my phone rooted using cwm adn everything is backed up so this weekend im going to install a nice custom rom for myself.
and for the final question, how do i close this thread?
Click to expand...
Click to collapse
:good:
Ask the moderator or just leave it be.