[Q] HELP XPERIA X8 Failed Flash(kernel) WON'T BOOT UP - XPERIA X8 Q&A, Help & Troubleshooting

Hello, I have unlocked Bootloader today and then tried to flash kernel and it failed and when I try I boot up the phone it won't boot! It just stays in black screen and vibrates when you turn it on. Won't even load to the Sony Ericsson screen ;(. Please help. Need the phone before 14th July. Thanks

http://filecrop.com/search.php?w=X8..._f=100000000&engine_r=1&engine_h=1&engine_m=1
Go to here download the first one (219mb) place it in your firmwares folder (where you place kernels) > run x10mini flasher> select flash > select the file > and flash and it's automatically clicked on 'loader.sin' doesn't matter if it's either kernel.sin or w/e it will flash both anyway but just have it on loader.sin lol.
Have your x8 turned of. Connect the usb to the android but don't connect the other end to the computer just yet. Once it's connected to the android and make sure it's turned off beforehand, connect the other end to the pc. Hopefully it should display the green LED light when you just connect it. Hit and hold the back button once you see the LED and connect the usb into the computer. DO NOT LET GO OF THE BACK BUTTON. and wait until it says 'connect in usb debugging mode' and make sure it reads 'flashing finished' before that. After that take of the usb of both ends. power on the device and your device is brand new lol.
I also assume that it's impossible for a kernel to fail installation unless:
you didn't hold the back button down or you let go in the process.
You flashed the wrong kernel E.g. GDX and flashing naa ICS kernel (which is unlikely just an example) cause the KERNEl is only made for ICS and therefore they don't go together so ~
And also for some custom roms you must have it completed in a all in one process. That means you flash the kernel and straight away boot in CWM and flash the rom and install and wipe anything else bla bla bla. But if it is NOT a all in one process then u can just flash the kernel then flash the rom 1 by 1. Read the instructions carefully on the rom and the kernel that's required to flash to use the rom. E.g. ICS rom by nAa which is minicm9 u have to flash kernel then boot into cwm then flash rom. It says that in both articles but this mistake happened to me in the past when I forgot to put the rom in the sd card so I had to contact one of my mental cheap 'friends' lol. Hopefully this works out for you if you need any help just say. And try and provide me with some more detail if all else doesn't work. I'll try my best to answer your query. Remember if you flash that EVERYTHING is gone so it's better than nothing and I also like it when you get to start anew =D.
I also found the quickest and easiest way to get the rom kernel rooted and everything all in one guide I can write up for you once your finished. Let's just get you out of this situation first

That is brick phone..
Yeah just flash stock kernel with flashtool.
And don't forget if you want upgrade, your baseband must 015
and do not flash wrong kernel...must compatible with your rom..
Sent from my E15i using xda app-developers app

Hello, Thanks for the Reply. But the Flasher doesn't detect the firmware you gave me? :O

Did u put the ftf file in flashtool's folder as required... u can even search on google for stock rom ftf file of x8/w8 it's easily available..
Sent from my X8 using xda premium

Yes, I put it in the Firmware folder. I downloaded some random stock '.ftf' yesterday and they don't fix the phone

OMG! I Just figured out what I did wrong! I didn't hold the back button during the Flashing! Not I have the Sony Erricson screen and it boots up! woahhh! . Love you guys xD

Here you go..
http://sony-w8.blogspot.com/2012/05/release200412-flashable-file-for-w8e16i.html?m=1
Sent from my X8 using xda premium

LOLz!
just relax dude!
downgrading using flash tool is easier,,
but dont forget to hold the back button dude! while you plug the usb cable to your phone

hello, Can you guys tell me which kernel version is safe to flash on my x8?? Bricked my device once before so i dont wanna risk it again. im currently running on gingerdx (i dont know which CM version is that rom.). i have downloaded nAa 07. but i dont know whether its safe or not,. Any help would be much appreciated..

Gingerdx works only on alfs kernel for gdx not even alfs for cm7 you can use alfs gdx V09a but if u have hitachi drivers for lcd you might have some screen cuts, even though works fine for me you can try it or else V08.. don't forget flash addon for V08 and update rom for V09a after flashing kernel and rom..
Read all the instruction on gdx and alfs kernel thread you get to know everything required..
Sent by the walking walkman..

Try to change to stock kernel, maybe your rom don't support for that kernel...................or find a rom that support your flashed kernel, then flash the rom via flashtool

Depends on which GDX you're using. You have unlocked the bootloader? If so, use alfs kernel its on the rom's post -.-

diabolicalprophecy said:
hello, Can you guys tell me which kernel version is safe to flash on my x8?? Bricked my device once before so i dont wanna risk it again. im currently running on gingerdx (i dont know which CM version is that rom.). i have downloaded nAa 07. but i dont know whether its safe or not,. Any help would be much appreciated..
Click to expand...
Click to collapse
as far as I know
miniCM7 - nAa
GigerDX - alfs
ow yeah!!
dont forget to always check updated kernel and ROM

had screen cut issues on alfs v9a, although worked fine for most of the games, i had to restart my phone to get rid of it. V8 was too laggy and didnt supported my rom very well. Had to switch to nAa 13 and DixinOS but its not smooth as alfsv9a. I will just have to wait for the bugs to be fixed. No option. Thanks dude,.
---------- Post added at 10:59 PM ---------- Previous post was at 10:53 PM ----------
yup i have unlocked bootloader.

BlackRabbit1703 said:
LOLz!
just relax dude!
downgrading using flash tool is easier,,
but dont forget to hold the back button dude! while you plug the usb cable to your phone
Click to expand...
Click to collapse
mate I have bricked my phone and I need it every kernal I try it doesn't work :L

Did you wipe dalvik chace?
Sent from my LG-P350 using xda app-developers app

killa_ninja58 said:
mate I have bricked my phone and I need it every kernal I try it doesn't work :L
Click to expand...
Click to collapse
Bootloader unlocked?
Sent from my X8 using xda app-developers app

eddrowe said:
Bootloader unlocked?
Sent from my X8 using xda app-developers app
Click to expand...
Click to collapse
how can i enable usb debugging ...... my usb debugging is off and i cant boot to enable it -_- any advice?

classmate_Jp said:
how can i enable usb debugging ...... my usb debugging is off and i cant boot to enable it -_- any advice?
Click to expand...
Click to collapse
Settings >applications > development
Duh.
Sent from my E15i using Tapatalk 2

Related

unbrick/Revert back to stock rom no matter what painlessly!!

Download the files before reading if ur interested
Found out many strainous guides on this section and really its a big pain to the neck reading everything here.Buff!!Anyway this is a stock froyo rom based on the originally shipped rom with root an a super easy installation.To do this u need nvidia drivers for mobile devices on ur pc.
-If ur on ics/jellybean download this first then continue
-Get the nvidia drivers from here.Unrar them to any folder.
-Now put off ur device.
-Take off the battery.
-Hold the vol up and down keys together.Keep holding and after about 3-4 secs connect to ur pc.
-Ur pc should detect the device but wont be able to install the drivers.U have to do that manually in device manager and i believe if ur n the xda u can do so except u want.(Come on its easy to manually install drivers on windows.Open device manager,see flagged driver with yellow sign,right click and choose update blahblah....)
-After installing unplug the phone,remove the battery,put it back and reboot ur device.
-After it boots up put it off and repeat steps 1-5.If the pc detects ur device the get this unzip and open FlashFirmware.bat an leave it do its thing.{For ics/jellybean users first run the flash.bat in downloaded file(which u should have extracted) and repeat steps 1-5 for the 3rd time and now do the flashfirmware.bat part}
Once u see the LG logo (and only then)on ur device then its ok.
When U boot there are 3 languages chinese,korean and english.
downloads, 1 & 2
Everything here is stock!!!
Hit thanks below if u benefited from this.
credit to wkpark too!!
Support dead , device sold but method works!!!!:crying::crying::crying:
hackarchive said:
Found out many strainous guides on this section and really its a big pain to the neck reading everything here.Buff!!Anyway this is a stock froyo rom based on the originally shipped rom with root an a super easy installation.To do this u need nvidia drivers for mobile devices on ur pc.
-First get the nvidia drivers from here.Unrar them to any folder put off ur device and take off the battery.Hold the vol up and down keys together.After about 4.5 secs connect to ur pc while still holding those buttons.Ur pc should detect the device and wont be able to install the drivers.U have to do that manually in device manager and i believe if ur n the xda u can do so except u want :laugh::laugh::laugh::laugh::laugh:.
-After installing reboot ur device.
-Then put it off and do the same as above.If the pc detects ur device the get this unzip and open FlashFirmware.bat an leave it do its thing.
Once u see the LG logo (and only then)on ur device then its ok.U boot into 3 languages chinese,korean and english.Hit thanks below if u benefited from this.Everything here is stock!!!
Click to expand...
Click to collapse
This is a great way to save a phone with wrong installation.. thanks for your guide!
Is this able also to downgrade from official ICS?
bayu_anggara2 said:
Is this able also to downgrade from official ICS?
Click to expand...
Click to collapse
It normally should do so but back up ur ics in cwm and give it a try!!!:good:
pls explain in brief with some pictures. I need it. I dont understand the whole procedure. pls help me.
Did u first download everything? Don't ask 4 too much this is the easiest procedure u can get just do all what is in my guide. Have no pictures and I don't have this phone now! Download and follow! I know your pb is fear. Don't be afraid of the guide. It has been tested working for the su660.
Sent from my IM-A830L using xda app-developers app
faizul134 said:
pls explain in brief with some pictures. I need it. I dont understand the whole procedure. pls help me.
Click to expand...
Click to collapse
See OP now it's a bit more user friendly!!
thx
Thank you. I saved my phone using your trick.
this really helped me in saving my life
help
does this revert back recovery to stock?
luenboy said:
does this revert back recovery to stock?
Click to expand...
Click to collapse
Yes. everything is stock here.
CWM 5.0.28
here is a linkhttp://www.filefactory.com/file/c407...0-20111121.zip
help
im sorry but,i think my cwm is corrupted,and im stuck at lg logo..my cwm says error when i wipe data/factory reset my phone..i am currently using cm7
luenboy said:
im sorry but,i think my cwm is corrupted,and im stuck at lg logo..my cwm says error when i wipe data/factory reset my phone..i am currently using cm7
Click to expand...
Click to collapse
Re install your CWM.
Hey reinstall ur cwm. There r many.
Sent from my IM-A830L using xda app-developers app
thanks for the tutorial..it really helped me...godbless..now,can you please help me install cwm?bcoz when i install it using rom manager,my phone got stuck on lg logo.i have to repeat your tutorial for my phone to boot up.how do i get to recovery using this rom?thanks in advance..godbless
Sent from my LG-P993 using xda premium
luenboy said:
thanks for the tutorial..it really helped me...godbless..now,can you please help me install cwm?bcoz when i install it using rom manager,my phone got stuck on lg logo.i have to repeat your tutorial for my phone to boot up.how do i get to recovery using this rom?thanks in advance..godbless
Sent from my LG-P993 using xda premium
Click to expand...
Click to collapse
get this man . Don't use rommanager again it doesn't support this device. :angel:
i always get an error when flashing cwm in nvflash..it was something like error executing command 14 nverror 0x120000
Sent from my LG-P993 using xda app-developers app
---------- Post added at 09:16 PM ---------- Previous post was at 09:11 PM ----------
hackarchive said:
get this man . Don't use rommanager again it doesn't support this device. :angel:
Click to expand...
Click to collapse
i cant even restore my phone using the factory reset in settings..someone,please help about this..a million thanks in advance..godbless.
Sent from my LG-P993 using xda app-developers app
try this one
:fingers-crossed:
any CWM compatible in this froyo cause i cant install cwm using nvflash? any tnx in advance..

[Q] Xperia X8 hangs up at Sony Ericsson logo

Hello. This is my final resort. -.-
I used miniCM7-2.2.1. I've tried everything that has been suggested. My X8 hangs up on the Sony Ericsson logo and I cant access the xRecovery menu. To shut my phone down, I have to take out the battery, since it wont shut down when it hangs up no matter how long I hold the power button. Then I insert the battery again; but when I connect the USB cord, it starts up automatically and then hangs up again. I've tried flashing it but it wont detect in flash mode even if the led is green. so no luck on flashing. I tried SEUS but it says I already have the latest software installed so no luck in updating either. Somebody help! T.T
SUMMARY:
-Hangs up on logo screen
-Cant access xRecovery
-Doesnt detect flash mode (even when led is green)
-SEUS cant upgrade since latest software is installed
PLEASE HELP!
do you have pcc and x8 drivers installed? try rebooting your pc and attempt to flash again. you should be able to get into flash mode. also install gg drivers.
also, i can't quite remember, but doesn't minicm7 require a custom kernel?
Just because i don't doesn't mean i can't.
cascabel said:
do you have pcc and x8 drivers installed? try rebooting your pc and attempt to flash again. you should be able to get into flash mode. also install gg drivers.
also, i can't quite remember, but doesn't minicm7 require a custom kernel?
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
yea. i've done that too. apparently, it still wont enter flash mode. -.- is there a software that reverts phones to their factory settings? without the need of actually interfering with the phone? ugh. -.-
vashmistofolees said:
yea. i've done that too. apparently, it still wont enter flash mode. -.- is there a software that reverts phones to their factory settings? without the need of actually interfering with the phone? ugh. -.-
Click to expand...
Click to collapse
Did you installed gordon gate drivers in drivers folder of flashtool?
Sent from my GT-S5360 using Tapatalk 2
vashmistofolees said:
yea. i've done that too. apparently, it still wont enter flash mode. -.- is there a software that reverts phones to their factory settings? without the need of actually interfering with the phone? ugh. -.-
Click to expand...
Click to collapse
only seus, pcc,or flashtool.. since you can't get into recovery.
i got it flashed. i figured i'd insert the battery after i plugged into pc. then i flashed it with a stock rom for e16i. worked like a charm. however, i still havent found the right custom rom yet. does anyone has any suggestions?
Dear bro,don't PANIC! its the only thing that makes us to create a bit useless threads..
try with Flashtool second time!
and if doesn't work use PC COMPANION its your best Companion
repair the X8 via PC COMPANION
- Turn off the phone, and unplug it from the PC !
- On your PC, uninstall Sony PC Companion
- Restart your PC
- On your PC, clean any Cache and Registry related to Sony PC Companion, then restart PC again.
- Reinstall Sony PC Companion by downloading it from here
- Turn on Sony PC Companion on your PC
- In Sony PC Companion, enter the Support Zone tab
- Go to Update Phone Software
A window will pop out, saying that it cannot find your phone
- Click on Fix Phone
- Click on Continue
A window will pop out, saying that you will lose all your data
- TICK the BOX
- Click on continue
An update process will began.
Wait for it to show a window with all the SONY mobile phones
- Find your phone (X8)
- Click on the phone.
Now all you have to do is follow the on-screen instructions. It will tell you to hold the back button and plug your turned-off X8 to the PC, then it will erase everything, and download the original 2.1 ROM to your X8.
If Sony PC Companion STILL doesn't recognize your X8, then, uninstall Sony PC Companion AGAIN, and start the above described process AGAIN. It WILL eventually work!
vashmistofolees said:
i got it flashed. i figured i'd insert the battery after i plugged into pc. then i flashed it with a stock rom for e16i. worked like a charm. however, i still havent found the right custom rom yet. does anyone has any suggestions?
Click to expand...
Click to collapse
even i have same problem bt mine it is getting switched on bt prob wit wifi n recovery mode ... in flash tool its cmin lyk in attachment.. any suggestion///????
vashmistofolees said:
i got it flashed. i figured i'd insert the battery after i plugged into pc. then i flashed it with a stock rom for e16i. worked like a charm. however, i still havent found the right custom rom yet. does anyone has any suggestions?
Click to expand...
Click to collapse
based on your posts, you're on stock kernel, right? if so the roms i preferred when i was on stock was froyobread and gdx.
Just because i don't doesn't mean i can't.
---------- Post added at 02:56 AM ---------- Previous post was at 02:54 AM ----------
x8bricked said:
even i have same problem bt mine it is getting switched on bt prob wit wifi n recovery mode ... in flash tool its cmin lyk in attachment.. any suggestion///????
Click to expand...
Click to collapse
you're trying to flash a custom kernel? is your bootloader unlocked? what rom+kernel combo are you on that!s giving you wifi issues?
Just because i don't doesn't mean i can't.
cascabel said:
based on your posts, you're on stock kernel, right? if so the roms i preferred when i was on stock was froyobread and gdx.
Just because i don't doesn't mean i can't.
---------- Post added at 02:56 AM ---------- Previous post was at 02:54 AM ----------
you're trying to flash a custom kernel? is your bootloader unlocked? what rom+kernel combo are you on that!s giving you wifi issues?
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
problem got solved after i repeatedly installed n uninstalled device n pcc in system... i repaired in sony pcc only..
i had already flashed it to custom rom with semc debrand .. my bootloader unlocked had gingerdx stock rom + nAa kernal 14
thank u
x8bricked said:
problem got solved after i repeatedly installed n uninstalled device n pcc in system... i repaired in sony pcc only..
i had already flashed it to custom rom with semc debrand .. my bootloader unlocked had gingerdx stock rom + nAa kernal 14
thank u
Click to expand...
Click to collapse
Your bootloader is locked -_-
sent using internet explorer, hope it reaches on time :fingers-crossed:
Gogeta said:
Your bootloader is locked -_-
sent using internet explorer, hope it reaches on time :fingers-crossed:
Click to expand...
Click to collapse
no its unlocked i checked twicw again its unlocked using msm7227 it shows 'r'
Well, I can tell you that I had a similar experience recently and I almost **** my pants. After having occupied the restroom, PCC worked for me absolutely perfectly, albeit I did have some problems installing the necessary drivers (had to do it from a different machine, obviously something in the registry was messed up).
Seeing you solved the problem, I recommend you install either a 2.2 or 2.3 ROM. Don't go for 4.x ones if you're up for normal use because they are way too strong for this little device (kudos to the developers who made these ROMs happen, though).
My recommendations:
2.2 - FroyoPro v2.5
2.3 - GingerDX v031b
Both work really well with custom kernels, and are very fast and stable.
My X8 has also the same problem, It hangs up in the logo screen and I cant go into the Flashmode, If I can only go into the Flashmode I have already fixed it, but my X8 opens up every time I plug it in my computer. Can anyone help me with this problem?
Banri1415 said:
My X8 has also the same problem, It hangs up in the logo screen and I cant go into the Flashmode, If I can only go into the Flashmode I have already fixed it, but my X8 opens up every time I plug it in my computer. Can anyone help me with this problem?
Click to expand...
Click to collapse
OK,assuming you have probably root the phone, by the way can you managed to go into recovery mode in your phone? If so, then just copy your rom zip files into the SD card and install zip files from SD card in the recovery mode. By the which Rom and Recovery you are using?
Banri1415 said:
My X8 has also the same problem, It hangs up in the logo screen and I cant go into the Flashmode, If I can only go into the Flashmode I have already fixed it, but my X8 opens up every time I plug it in my computer. Can anyone help me with this problem?
Click to expand...
Click to collapse
you use flashtool to unbrick your phone? if you use it and can't flash your phone, you have to install flashtool-drivers.exe in drivers folder. everything'll work well.good luck

[Q] Xperia z not booting after flashing kernel ;(

I am extremely new to root n stuff, i successfully rooted using happy, doomlord binary and was preety happy . flashed few patchs and was happy.
Finally thought i flashing Pure X audio for xperia z and my mistake i saved DoomLord kernal on the same place. i mis selected Doomslord kernel instaed of PureXaudio ;( and finnally when i try hit reboot - it is not booting up
PLZ help !!! what do i need to do to get in to recovery tried power volume up and down , it vibrate but screen doesn't turn on or no progress ;(
Is flash or fast boot mode working properly?
Try to flash kernel again, or flash stock rom thru flashtool
doing it
Bairei said:
Is flash or fast boot mode working properly?
Try to flash kernel again, or flash stock rom thru flashtool
Click to expand...
Click to collapse
IT is not at all switching on , blank screen ;(
i tried to enter TWRP recovery , holding power on and tapping voume up - no go ;(
is there any other way to get in to revcovery ? i am preety new .. yes i am installing flashtool now and should i try tft ROM or can i flash by back up ?? i am not sure
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium
Trying it .. small query , pl help
gm007 said:
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
Thanks a lot, i am doing it right now, downloading kernel
But my doubt is phone seem completely dead - when i hold power button it vibrates and red LED blinks, is this normal behavior ??.
no loader found for this device ;(
gm007 said:
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
Now i am stuck at teh screen where it says 'no loader found for this device flashtool' can't go any further.
My bootloader is locked, should it be unlocked to get this done
please help !!
No you don't need to unlock the boot loader to flash via flash tool'you need the drivers
http://developer.sonymobile.com/services/flash-tool/
you will need to unlock if you want to flash a custom kernel ..
Try using Sony update service sus to repair your phone
http://www.sonymobile.com/gb/tools/update-service/
Sent from my Nexus 7 using Tapatalk 2
Please help. I've just flash DoomLord v13 kernel via CWM: after install the zip file, I choose Reboot to system but my phone does not boot afterward
I push power button, the phone vibrates but does not awake
I connect my phone to usb, the red light blinks only
Please help If anybody has experienced
Thank you in advance
vodanhdaisu said:
Please help. I've just flash DoomLord v13 kernel via CWM: after install the zip file, I choose Reboot to system but my phone does not boot afterward
I push power button, the phone vibrates but does not awake
I connect my phone to usb, the red light blinks only
Please help If anybody has experienced
Thank you in advance
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2229250
Sent from my C6603 using xda premium
fish droid said:
Try using Sony update service sus to repair your phone
http://www.sonymobile.com/gb/tools/update-service/
Click to expand...
Click to collapse
You can't use SUS if you have already flashed your phone with a custom kernel, you can only use flashtool.
Just take a look to the link of gm007.
Xperia z bricked after doom Lord kernel! Help pls
QualQuek said:
You can't use SUS if you have already flashed your phone with a custom kernel, you can only use flashtool.
Just take a look to the link of gm007.
Click to expand...
Click to collapse
I am having the same problem. I have tried everything I know of including fastboot, flash mode, sus, pc companion, and so on. Still my phone won't even blink anymore. It doesn't seem to charge either. I don't know what to do. Someone please help! I was running creskole romantic and goo manager recommended the install of the doom Lord kernel v.18. Sadly, my phone never rebooted. Complete black screen.
Flash via flashtool bro.and dont use custom kernel ,use the stock kernel of doormlord one if ur locked bootloader.
Sent from my C6603
hOtsacE22 said:
Flash via flashtool bro.and dont use custom kernel ,use the stock kernel of doormlord one if ur locked bootloader.
Sent from my C6603
Click to expand...
Click to collapse
You can't flash unsigned kernels on locked bootloaders!! Just stock kernel.sin from identical FW!
Sent from my C6603 using XDA Premium 4 mobile app
PLEASE HELP i flash DooMKernel via cwm after reboot mobile not turn on push power button, the phone vibrates but does not awake
then i flash ftf via flashtool its turn on but again cant use any of the kenerl ..i have unlocked boot loader i tried to clean cash dalvik etc but always get soft bricked >PLEASE HELP
---------- Post added at 04:04 PM ---------- Previous post was at 03:06 PM ----------
Ronco87 said:
I am having the same problem. I have tried everything I know of including fastboot, flash mode, sus, pc companion, and so on. Still my phone won't even blink anymore. It doesn't seem to charge either. I don't know what to do. Someone please help! I was running creskole romantic and goo manager recommended the install of the doom Lord kernel v.18. Sadly, my phone never rebooted. Complete black screen.
Click to expand...
Click to collapse
same with me .........i try to flash it via cwm but after reboot mobile not turn on then i flash its original stock 2.67 kernel via flashtool my mobile turn on but wifi didnt works ..
then i flash
eXistenZ v4.3.5 ultra edition wifi now working but again : but cant install any of the kernels from doom kernel and others please help
my xperia Z cant turn on
Please help. I've just flash DoomLord v13 kernel via CWM: after install the zip file, I choose Reboot to system but my phone does not boot afterward
I push power button, the phone vibrates but does not awake
I connect my phone to usb, the red light blinks only
will it boot if i flash once again the latest firmware
Please help If anybody has experienced
Thank you in advance
raveldom said:
Please help. I've just flash DoomLord v13 kernel via CWM: after install the zip file, I choose Reboot to system but my phone does not boot afterward
I push power button, the phone vibrates but does not awake
I connect my phone to usb, the red light blinks only
will it boot if i flash once again the latest firmware
Please help If anybody has experienced
Thank you in advance
Click to expand...
Click to collapse
Is your bootloader unlocked? If not, you cannot run a custom kernel.
Flashing just the stock kernel for your firmware with Flashtool should fix your problem.
Sent from my C6603 using Tapatalk
kingvortex said:
Is your bootloader unlocked? If not, you cannot run a custom kernel.
Flashing just the stock kernel for your firmware with Flashtool should fix your problem.
Sent from my C6603 using Tapatalk
Click to expand...
Click to collapse
yes it is unlocked,i try to look everywhere on the internet and finally resolved d issues with d phone
problem!!
kernel not getting flashed through cwm and xperia z is rebooting again and again.what to do ?
salujapulkit said:
kernel not getting flashed through cwm and xperia z is rebooting again and again.what to do ?
Click to expand...
Click to collapse
Flash the img file from fastboot
Xperia Z not booting up after flashing
Hello guys, I badly need help in fixing my Xperia z c6603 device. I flashed the device using the ftf file from xperifirm and now my device does not boot up and stuck in blank screen.
Kindly assist.

[Q] Help flashed tilal6991's CM 10.2 [4.3] [XPERIA T] cant go back to cm 10.1

Hello everyone
I am a noob.
I have just recently flashed tilal6991's CM 10.2 [4.3] [XPERIA T] rom onto my Xperia T. I know it is a working progress and it works really fast on my phone.
I had decided that after trying it out I would wait till a nightly came out for it. Only thing is I can no longer access CWM by starting up phone and repeatedly pressing down volume. it justs keep screen flickering on a blank screen until I hold up volume and power button to reboot phone.
Can someone please tell me an idiot proof process of reinstalling cm 10.1 onto the phone?
I used CWM to install teh rom.
Many thanks in advance
Just flash a stock ftf using flashtool.
Our flash a stock kernel (doomkernel is good) then flash a stock based custom Rom in recovery (I suggest mine Rom-assaye)
You cannot repair in pccompanion because you have unlocked your bootloader
Sent from my LT30p using xda premium
gregbradley said:
Just flash a stock ftf using flashtool.
Our flash a stock kernel (doomkernel is good) then flash a stock based custom Rom in recovery (I suggest mine Rom-assaye)
You cannot repair in pccompanion because you have unlocked your bootloader
Sent from my LT30p using xda premium
Click to expand...
Click to collapse
Thanks for the quick reply. downloading flash tool now. I will give your rom a go.
Do I need to download the ftf from flashtools website? I noticed they have 9.1.A.1.140 Customized CE1 firmware.
No, just one from the all in one thread, but that one seems fine.
Make sure you use the flash tool from the first post in the dev section
Sent from my LT30p using xda premium
you dont need to flash stock FTF
just flash this kernel via flashtool
http://goo.im/devs/tilal6991/kernels/mint/boot-cm-10.1-test-28072013-take2.img
and you will be able to enter recovery and then flash what you need... this way is more quicker..
Apologies, I misread the op, I thought he wanted to go back to stock.
Yes, flashing a kernel (doomkernel will do) with recovery then the . Zip for cm10 will do the trick much quicker.
Edit
Or flash the kernel then restore the backup of your cm10 Rom that you made before flashing a new Rom
Sent from my LT30p using xda premium
thanks for all the help guys.
I have a new problem. the phone will not stay in fast boot mode and fast tool just keeps saying awaiting device. i dont know what to do. I hold down power and volume up buttons when putting the micro usb in. I get the 3 vibration in a row and then i let go of buttons. blue light comes on for a few seconds and then goes off.
Any ideas?
open flashtool and select flash icon then fastboot mode
turn off your phone hold power +volume down till you get 3 vibrations on a row
now connect the phone by holding only up volume when connecting cable
then select SELECT kernel to flash switch to IMG extension and select kernel after 5 second it should be flashed
now turn on your phone go to recovery and flash what you want
Guys you are all awesome.
finally got it sorted. took me til 2230 GMT. It was the cursed Windows 8. it was not letting me install sony fastboot drivers. once i switched off the function to stop me installing my own drivers, I was able to install fastboot drivers and 30 secs later I was in CWM.
Once again guys you are awesome.

[Q] my X8 is dead plzzzz help !!!!!!!!!

I have Xperia X8 with unlocked boot-loader using nAa kernel 14 gb and running android 2.3.7 jelly bread
I was trying to flash nAa jb 03 kernel via flashtool but for some reason the flash was aborted although I did the usual drill ... i tried flashing it back but no result it didnt work.
after that I tried to power up the phone and the led goes green and the phone vibrate and then nothing .... no light on the screen no boot animation just like that..... flashmode is still working i guess....
so I was searched here in xda for a solution and I found out that flashing back to stock kernel should help it via SEUS
so I just wanna make sure Im doing the right thing .... please give me any suggestion ..... its still early to say food bye to my lovely phone
Root97 said:
I have Xperia X8 with unlocked boot-loader using nAa kernel 14 gb and running android 2.3.7 jelly bread
I was trying to flash nAa jb 03 kernel via flashtool but for some reason the flash was aborted although I did the usual drill ... i tried flashing it back but no result it didnt work.
after that I tried to power up the phone and the led goes green and the phone vibrate and then nothing .... no light on the screen no boot animation just like that..... flashmode is still working i guess....
so I was searched here in xda for a solution and I found out that flashing back to stock kernel should help it via SEUS
so I just wanna make sure Im doing the right thing .... please give me any suggestion ..... its still early to say food bye to my lovely phone
Click to expand...
Click to collapse
just flash the stock firmware using flashtool
download it from my signature
BlackRabbit1703 said:
just flash the stock firmware using flashtool
download it from my signature
Click to expand...
Click to collapse
Thnx ^_^ its appreciated .... any idea about the cause of the problem ?

Categories

Resources