[Q] my X8 is dead plzzzz help !!!!!!!!! - XPERIA X8 Q&A, Help & Troubleshooting

I have Xperia X8 with unlocked boot-loader using nAa kernel 14 gb and running android 2.3.7 jelly bread
I was trying to flash nAa jb 03 kernel via flashtool but for some reason the flash was aborted although I did the usual drill ... i tried flashing it back but no result it didnt work.
after that I tried to power up the phone and the led goes green and the phone vibrate and then nothing .... no light on the screen no boot animation just like that..... flashmode is still working i guess....
so I was searched here in xda for a solution and I found out that flashing back to stock kernel should help it via SEUS
so I just wanna make sure Im doing the right thing .... please give me any suggestion ..... its still early to say food bye to my lovely phone

Root97 said:
I have Xperia X8 with unlocked boot-loader using nAa kernel 14 gb and running android 2.3.7 jelly bread
I was trying to flash nAa jb 03 kernel via flashtool but for some reason the flash was aborted although I did the usual drill ... i tried flashing it back but no result it didnt work.
after that I tried to power up the phone and the led goes green and the phone vibrate and then nothing .... no light on the screen no boot animation just like that..... flashmode is still working i guess....
so I was searched here in xda for a solution and I found out that flashing back to stock kernel should help it via SEUS
so I just wanna make sure Im doing the right thing .... please give me any suggestion ..... its still early to say food bye to my lovely phone
Click to expand...
Click to collapse
just flash the stock firmware using flashtool
download it from my signature

BlackRabbit1703 said:
just flash the stock firmware using flashtool
download it from my signature
Click to expand...
Click to collapse
Thnx ^_^ its appreciated .... any idea about the cause of the problem ?

Related

[Q] My w8 is not starting only showing sony ericsson startup screen.

I installed cm7 without flashing nAa kernal and now i am not able to start my mobile after my last reboot by cmw.
I am also not able to switch to xrecovery or cmw on startup by pressing back key regularly..........
plz help me out god know what to do with my phone...............
and i also dose not unlock bootloader...........
oh!!! plz is there is any expert who can help me out.....
rishinhr said:
I installed cm7 without flashing nAa kernal and now i am not able to start my mobile after my last reboot by cmw.
I am also not able to switch to xrecovery or cmw on startup by pressing back key regularly..........
plz help me out god know what to do with my phone...............
and i also dose not unlock bootloader...........
oh!!! plz is there is any expert who can help me out.....
Click to expand...
Click to collapse
You will need a computer,download flash tool,download official w8 rom(original)
You can Thank me Now .
rishinhr said:
I installed cm7 without flashing nAa kernal and now i am not able to start my mobile after my last reboot by cmw.
I am also not able to switch to xrecovery or cmw on startup by pressing back key regularly..........
plz help me out god know what to do with my phone...............
and i also dose not unlock bootloader...........
oh!!! plz is there is any expert who can help me out.....
Click to expand...
Click to collapse
do u see sonyericsson white logo on startup?
try using SEUS http://sony-ericsson-update-service.en.uptodown.com/
or try this
http://forum.xda-developers.com/showthread.php?t=1011071
gudluck
dont worry. everything will be alright. This is a chance for you to gain knowledges.
No fail no success.
Bricked phone
I also face the same problem when i use Xperia X8. Here is the solution for to recover it.
Please search for Xperia x8/w8 Update Service setup in google and install the software in your PC then do the below steps.
1) switch off your phone
2) Press the back button continuously and connect the USB cable from your system to phone.
3) Then run the updated service. It will take nearly 30 minutes to complete the software updated process.
Bricked phone?
I had the same problems the first time, i even had to take it back to where I purchased it since it had warranty, after they handed the phone again I stayed with the feeling that there was something I had to try I did it again and it stayed on the sonyericsson logo and didn`t enter the Xrecovery by pressing back button guess what I tried pressin the other buttons the menu and the home button and it enter the Xrecovery from there try doing a restore if you backedup your info if not you have to use flashtool and flash the rom
try going to Xperiax8(todo para este movil) and search Reparar Sony Ericcson Xperia X8 despues de Briqueo (repair phone after brick)
Recommended if you download a clean stock rom I used 1.6 donut and then installed the stock baseband 06 am pretty sure that flashtool has it if not follow this
download the stock firmware to your device and you are back in business
you may use flashtool to flash stock fw.now cwm may not works as it was on fw,
but my w8 is not in the list of phones in SEUS..............can i install by selecting x8..................plz reply fast
rishinhr said:
but my w8 is not in the list of phones in SEUS..............can i install by selecting x8..................plz reply fast
Click to expand...
Click to collapse
try flashtool then
thanks i am out of danger............finaly
I Think My phone is HARD BRICKED help needed pls
rishinhr said:
thanks i am out of danger............finaly
Click to expand...
Click to collapse
How? my w8 is not detected by the pc and i can't make my phone to the recovery mode by pressing back key while booting. It still end up in the blank screen after the Sony Ericsson text...
arunvlnd8 said:
How? my w8 is not detected by the pc and i can't make my phone to the recovery mode by pressing back key while booting. It still end up in the blank screen after the Sony Ericsson text...
Click to expand...
Click to collapse
Restore with PCC
Sent from my E15i using xda premium
Or dl stock rom and flashtool. Flash stock using flashtool.
Sent from my rooted tomato using xda app
plz help me
i have same problem what can i do to backup rom ?

a problem with x8 !!

hello xda i have a x8 and i can flash it with flash tool and i did flash it with stock but it vibrate when i turn it on and the back light of the screen get on then restart ... without any thing on screen !!!
the flash tool detect it .. but it keeps on restarting .. the led is working also green when in flash mood and red as its charging !!
what do u think the problem is and is there any way posted here to solve this ?
Flash back to stock rom.
i did .. but no luck !
wemox said:
i did .. but no luck !
Click to expand...
Click to collapse
wat u wanna do? flash back to stock rom?try with seus/pcc
well open pc companion and choose update phone, it will bring the phone to its original firm. on 2.1, after that start all over again root, flash...

[Q] HELP XPERIA X8 Failed Flash(kernel) WON'T BOOT UP

Hello, I have unlocked Bootloader today and then tried to flash kernel and it failed and when I try I boot up the phone it won't boot! It just stays in black screen and vibrates when you turn it on. Won't even load to the Sony Ericsson screen ;(. Please help. Need the phone before 14th July. Thanks
http://filecrop.com/search.php?w=X8..._f=100000000&engine_r=1&engine_h=1&engine_m=1
Go to here download the first one (219mb) place it in your firmwares folder (where you place kernels) > run x10mini flasher> select flash > select the file > and flash and it's automatically clicked on 'loader.sin' doesn't matter if it's either kernel.sin or w/e it will flash both anyway but just have it on loader.sin lol.
Have your x8 turned of. Connect the usb to the android but don't connect the other end to the computer just yet. Once it's connected to the android and make sure it's turned off beforehand, connect the other end to the pc. Hopefully it should display the green LED light when you just connect it. Hit and hold the back button once you see the LED and connect the usb into the computer. DO NOT LET GO OF THE BACK BUTTON. and wait until it says 'connect in usb debugging mode' and make sure it reads 'flashing finished' before that. After that take of the usb of both ends. power on the device and your device is brand new lol.
I also assume that it's impossible for a kernel to fail installation unless:
you didn't hold the back button down or you let go in the process.
You flashed the wrong kernel E.g. GDX and flashing naa ICS kernel (which is unlikely just an example) cause the KERNEl is only made for ICS and therefore they don't go together so ~
And also for some custom roms you must have it completed in a all in one process. That means you flash the kernel and straight away boot in CWM and flash the rom and install and wipe anything else bla bla bla. But if it is NOT a all in one process then u can just flash the kernel then flash the rom 1 by 1. Read the instructions carefully on the rom and the kernel that's required to flash to use the rom. E.g. ICS rom by nAa which is minicm9 u have to flash kernel then boot into cwm then flash rom. It says that in both articles but this mistake happened to me in the past when I forgot to put the rom in the sd card so I had to contact one of my mental cheap 'friends' lol. Hopefully this works out for you if you need any help just say. And try and provide me with some more detail if all else doesn't work. I'll try my best to answer your query. Remember if you flash that EVERYTHING is gone so it's better than nothing and I also like it when you get to start anew =D.
I also found the quickest and easiest way to get the rom kernel rooted and everything all in one guide I can write up for you once your finished. Let's just get you out of this situation first
That is brick phone..
Yeah just flash stock kernel with flashtool.
And don't forget if you want upgrade, your baseband must 015
and do not flash wrong kernel...must compatible with your rom..
Sent from my E15i using xda app-developers app
Hello, Thanks for the Reply. But the Flasher doesn't detect the firmware you gave me? :O
Did u put the ftf file in flashtool's folder as required... u can even search on google for stock rom ftf file of x8/w8 it's easily available..
Sent from my X8 using xda premium
Yes, I put it in the Firmware folder. I downloaded some random stock '.ftf' yesterday and they don't fix the phone
OMG! I Just figured out what I did wrong! I didn't hold the back button during the Flashing! Not I have the Sony Erricson screen and it boots up! woahhh! . Love you guys xD
Here you go..
http://sony-w8.blogspot.com/2012/05/release200412-flashable-file-for-w8e16i.html?m=1
Sent from my X8 using xda premium
LOLz!
just relax dude!
downgrading using flash tool is easier,,
but dont forget to hold the back button dude! while you plug the usb cable to your phone
hello, Can you guys tell me which kernel version is safe to flash on my x8?? Bricked my device once before so i dont wanna risk it again. im currently running on gingerdx (i dont know which CM version is that rom.). i have downloaded nAa 07. but i dont know whether its safe or not,. Any help would be much appreciated..
Gingerdx works only on alfs kernel for gdx not even alfs for cm7 you can use alfs gdx V09a but if u have hitachi drivers for lcd you might have some screen cuts, even though works fine for me you can try it or else V08.. don't forget flash addon for V08 and update rom for V09a after flashing kernel and rom..
Read all the instruction on gdx and alfs kernel thread you get to know everything required..
Sent by the walking walkman..
Try to change to stock kernel, maybe your rom don't support for that kernel...................or find a rom that support your flashed kernel, then flash the rom via flashtool
Depends on which GDX you're using. You have unlocked the bootloader? If so, use alfs kernel its on the rom's post -.-
diabolicalprophecy said:
hello, Can you guys tell me which kernel version is safe to flash on my x8?? Bricked my device once before so i dont wanna risk it again. im currently running on gingerdx (i dont know which CM version is that rom.). i have downloaded nAa 07. but i dont know whether its safe or not,. Any help would be much appreciated..
Click to expand...
Click to collapse
as far as I know
miniCM7 - nAa
GigerDX - alfs
ow yeah!!
dont forget to always check updated kernel and ROM
had screen cut issues on alfs v9a, although worked fine for most of the games, i had to restart my phone to get rid of it. V8 was too laggy and didnt supported my rom very well. Had to switch to nAa 13 and DixinOS but its not smooth as alfsv9a. I will just have to wait for the bugs to be fixed. No option. Thanks dude,.
---------- Post added at 10:59 PM ---------- Previous post was at 10:53 PM ----------
yup i have unlocked bootloader.
BlackRabbit1703 said:
LOLz!
just relax dude!
downgrading using flash tool is easier,,
but dont forget to hold the back button dude! while you plug the usb cable to your phone
Click to expand...
Click to collapse
mate I have bricked my phone and I need it every kernal I try it doesn't work :L
Did you wipe dalvik chace?
Sent from my LG-P350 using xda app-developers app
killa_ninja58 said:
mate I have bricked my phone and I need it every kernal I try it doesn't work :L
Click to expand...
Click to collapse
Bootloader unlocked?
Sent from my X8 using xda app-developers app
eddrowe said:
Bootloader unlocked?
Sent from my X8 using xda app-developers app
Click to expand...
Click to collapse
how can i enable usb debugging ...... my usb debugging is off and i cant boot to enable it -_- any advice?
classmate_Jp said:
how can i enable usb debugging ...... my usb debugging is off and i cant boot to enable it -_- any advice?
Click to expand...
Click to collapse
Settings >applications > development
Duh.
Sent from my E15i using Tapatalk 2

[Q] Xperia z not booting after flashing kernel ;(

I am extremely new to root n stuff, i successfully rooted using happy, doomlord binary and was preety happy . flashed few patchs and was happy.
Finally thought i flashing Pure X audio for xperia z and my mistake i saved DoomLord kernal on the same place. i mis selected Doomslord kernel instaed of PureXaudio ;( and finnally when i try hit reboot - it is not booting up
PLZ help !!! what do i need to do to get in to recovery tried power volume up and down , it vibrate but screen doesn't turn on or no progress ;(
Is flash or fast boot mode working properly?
Try to flash kernel again, or flash stock rom thru flashtool
doing it
Bairei said:
Is flash or fast boot mode working properly?
Try to flash kernel again, or flash stock rom thru flashtool
Click to expand...
Click to collapse
IT is not at all switching on , blank screen ;(
i tried to enter TWRP recovery , holding power on and tapping voume up - no go ;(
is there any other way to get in to revcovery ? i am preety new .. yes i am installing flashtool now and should i try tft ROM or can i flash by back up ?? i am not sure
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium
Trying it .. small query , pl help
gm007 said:
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
Thanks a lot, i am doing it right now, downloading kernel
But my doubt is phone seem completely dead - when i hold power button it vibrates and red LED blinks, is this normal behavior ??.
no loader found for this device ;(
gm007 said:
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
Now i am stuck at teh screen where it says 'no loader found for this device flashtool' can't go any further.
My bootloader is locked, should it be unlocked to get this done
please help !!
No you don't need to unlock the boot loader to flash via flash tool'you need the drivers
http://developer.sonymobile.com/services/flash-tool/
you will need to unlock if you want to flash a custom kernel ..
Try using Sony update service sus to repair your phone
http://www.sonymobile.com/gb/tools/update-service/
Sent from my Nexus 7 using Tapatalk 2
Please help. I've just flash DoomLord v13 kernel via CWM: after install the zip file, I choose Reboot to system but my phone does not boot afterward
I push power button, the phone vibrates but does not awake
I connect my phone to usb, the red light blinks only
Please help If anybody has experienced
Thank you in advance
vodanhdaisu said:
Please help. I've just flash DoomLord v13 kernel via CWM: after install the zip file, I choose Reboot to system but my phone does not boot afterward
I push power button, the phone vibrates but does not awake
I connect my phone to usb, the red light blinks only
Please help If anybody has experienced
Thank you in advance
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2229250
Sent from my C6603 using xda premium
fish droid said:
Try using Sony update service sus to repair your phone
http://www.sonymobile.com/gb/tools/update-service/
Click to expand...
Click to collapse
You can't use SUS if you have already flashed your phone with a custom kernel, you can only use flashtool.
Just take a look to the link of gm007.
Xperia z bricked after doom Lord kernel! Help pls
QualQuek said:
You can't use SUS if you have already flashed your phone with a custom kernel, you can only use flashtool.
Just take a look to the link of gm007.
Click to expand...
Click to collapse
I am having the same problem. I have tried everything I know of including fastboot, flash mode, sus, pc companion, and so on. Still my phone won't even blink anymore. It doesn't seem to charge either. I don't know what to do. Someone please help! I was running creskole romantic and goo manager recommended the install of the doom Lord kernel v.18. Sadly, my phone never rebooted. Complete black screen.
Flash via flashtool bro.and dont use custom kernel ,use the stock kernel of doormlord one if ur locked bootloader.
Sent from my C6603
hOtsacE22 said:
Flash via flashtool bro.and dont use custom kernel ,use the stock kernel of doormlord one if ur locked bootloader.
Sent from my C6603
Click to expand...
Click to collapse
You can't flash unsigned kernels on locked bootloaders!! Just stock kernel.sin from identical FW!
Sent from my C6603 using XDA Premium 4 mobile app
PLEASE HELP i flash DooMKernel via cwm after reboot mobile not turn on push power button, the phone vibrates but does not awake
then i flash ftf via flashtool its turn on but again cant use any of the kenerl ..i have unlocked boot loader i tried to clean cash dalvik etc but always get soft bricked >PLEASE HELP
---------- Post added at 04:04 PM ---------- Previous post was at 03:06 PM ----------
Ronco87 said:
I am having the same problem. I have tried everything I know of including fastboot, flash mode, sus, pc companion, and so on. Still my phone won't even blink anymore. It doesn't seem to charge either. I don't know what to do. Someone please help! I was running creskole romantic and goo manager recommended the install of the doom Lord kernel v.18. Sadly, my phone never rebooted. Complete black screen.
Click to expand...
Click to collapse
same with me .........i try to flash it via cwm but after reboot mobile not turn on then i flash its original stock 2.67 kernel via flashtool my mobile turn on but wifi didnt works ..
then i flash
eXistenZ v4.3.5 ultra edition wifi now working but again : but cant install any of the kernels from doom kernel and others please help
my xperia Z cant turn on
Please help. I've just flash DoomLord v13 kernel via CWM: after install the zip file, I choose Reboot to system but my phone does not boot afterward
I push power button, the phone vibrates but does not awake
I connect my phone to usb, the red light blinks only
will it boot if i flash once again the latest firmware
Please help If anybody has experienced
Thank you in advance
raveldom said:
Please help. I've just flash DoomLord v13 kernel via CWM: after install the zip file, I choose Reboot to system but my phone does not boot afterward
I push power button, the phone vibrates but does not awake
I connect my phone to usb, the red light blinks only
will it boot if i flash once again the latest firmware
Please help If anybody has experienced
Thank you in advance
Click to expand...
Click to collapse
Is your bootloader unlocked? If not, you cannot run a custom kernel.
Flashing just the stock kernel for your firmware with Flashtool should fix your problem.
Sent from my C6603 using Tapatalk
kingvortex said:
Is your bootloader unlocked? If not, you cannot run a custom kernel.
Flashing just the stock kernel for your firmware with Flashtool should fix your problem.
Sent from my C6603 using Tapatalk
Click to expand...
Click to collapse
yes it is unlocked,i try to look everywhere on the internet and finally resolved d issues with d phone
problem!!
kernel not getting flashed through cwm and xperia z is rebooting again and again.what to do ?
salujapulkit said:
kernel not getting flashed through cwm and xperia z is rebooting again and again.what to do ?
Click to expand...
Click to collapse
Flash the img file from fastboot
Xperia Z not booting up after flashing
Hello guys, I badly need help in fixing my Xperia z c6603 device. I flashed the device using the ftf file from xperifirm and now my device does not boot up and stuck in blank screen.
Kindly assist.

[Q] Question:My x8 Is Dead !!! please help !!!!

I have Xperia X8 with unlocked boot-loader using nAa kernel 14 gb and running android 2.3.7 jelly bread
I was trying to flash nAa jb 03 kernel via flashtool but for some reason the flash was aborted although I did the usual drill ... i tried flashing it back but no result it didnt work.
after that I tried to power up the phone and the led goes green and the phone vibrate and then nothing .... no light on the screen no boot animation just like that..... flashmode is still working i guess....
so I was searched here in xda for a solution and I found out that flashing back to stock kernel should help it via SEUS
so I just wanna make sure Im doing the right thing .... please give me any suggestion ..... its still early to say food bye to my lovely phone

Categories

Resources