Help with flashing ics roms!!! - Galaxy S I9000 Q&A, Help & Troubleshooting

Well, next thing is going on. I have installed many roms and every time was a succes. Never ever went anything wrong. Now i am trying to install ics roms, cmw gives an error when he is "opening update package". I have tried cm9 build4 and paranoidandroid latest version. I wipe cache, factory set, then i format system and mount system. Then install from sd card and chose update package. What am i doing wrong¡!!
Sent from my GT-I9001 using xda premium

Ps. Sorry for bad english
Sent from my GT-I9001 using xda premium

Have you a external sd (µSD) ?
if yes, remove it and try again

Same problem...
Sent from my GT-I9001 using xda premium

Few times ago, I got the same problem and I think I solved it with an update of ClockWork Recovery Mod

I downloaded rom manager from app store and hit the "flash clockworkmod recovery" . Then there came a list with phone models, but the gt-i9001 wasnt included, so i chose gt-i9000, i hope that wont be a problem. Next i went into recovery mode, there i saw i was using feamod 1.4 based on cmw 5.5.0.4. After little bit of googling i found that this is the latest cmw vesion... So i backuped my current rom (BlazR ultimate). Wiped everything, format system, chose zip from sdcard and tried the kang version of cm9. Also tried the cm9 normal build4 and tge paranoidandroid but all failed. Just for trying i tried to flash the blazR Rom again, wich has firmware 2.3.6, but this went perfect. So how can it be that my cmw only flashes non-ics roms?
Sent from my GT-I9001 using xda premium

Nevermind. Allready solved. The feamod cmw recoverys dont support ics.. soort i flashed team win recovery
Sent from my GT-I9001 using xda premium

Related

[Q] HELP! CWM 6.0.1.4 - can't flash another recovery

Hey guys
I've flashed the CWM 6.0.1.4 (http://forum.xda-developers.com/showthread.php?t=1852725) bu now I'm unable to do anything in my device, the recovery works but I can't reboot into system, it only reboot into recovery.. I flashed CWM 5.0.26 via Odin but nothing happens, still reboots into 6.0.1.4. Pls, someone can help me with this? Is my phone bricked now?
If you have on your SD card CWM 5th it can be installed by CWM 6 which now have and abductions reboot system now, then you start CWM 5 and ate with reboot system now ...
shucrut said:
Hey guys
I've flashed the CWM 6.0.1.4 (http://forum.xda-developers.com/showthread.php?t=1852725) bu now I'm unable to do anything in my device, the recovery works but I can't reboot into system, it only reboot into recovery.. I flashed CWM 5.0.26 via Odin but nothing happens, still reboots into 6.0.1.4. Pls, someone can help me with this? Is my phone bricked now?
Click to expand...
Click to collapse
Any success in getting cwm to work finally??
Sent from my GT-I5800 using xda app-developers app
Yess, here what i did:
Downloaded a sock rom flashable via odin (cant remember what version was, i think it was xwkt7), then my phone stucked in boot and i flashed again the recovery 5.0.26 and everything came back to normal
Sent from my GT-S5830 using xda app-developers app
shucrut said:
Yess, here what i did:
Downloaded a sock rom flashable via odin (cant remember what version was, i think it was xwkt7), then my phone stucked in boot and i flashed again the recovery 5.0.26 and everything came back to normal
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
Please provide me a link to the cwm5 file u flashed.
Sent from my GT-I5800 using xda app-developers app

[Q] android.process.media

I rooted the captivate today (which was on froyo) (Using the odin method) and tried the official CM10 Rom first and then the AoCP Rom because i was getting a message saying 'android.process.media has stopped. Now i am getting the same problem with every other ROM, what might be the problem?? :crying: !
Did you try to reflash back to stock?
Do next using ODIN, download stock froyo for your rom if you don't have if its single file put it in PDA and flash it ( do not check repartition)
if you have 3 file you can check repartition but you will have to put PiT file aslo but if you have 1 file better.
So when you go back to stock, root your device install CWM recovery and install some older rom like CM7 to get GB with bootloader then when it boot ones if everything is ok, reboot recovery and flash CM10 or any rom you witch.
maybe a corrupted external sd card or other partition could cause this message. if you have an external sd card and unmount it, does the problem go away?
Sent from my SGH-I897
Maybe some rom made bad partitin layout so going back to stock then flash cm7 is the best way. Then from cm7 he can go any rom he like.
Sent from my GT-I9010 using xda app-developers app
I went back to the leaked official GB, using odin, then rooted the phone again , the flashed the kernel with recovery, then wiped everything and then flashed CM10, still gave me the same message and no I don't have an external, only internal SD.
Sent from my Wildfire S A510e using xda premium
Xenux92 said:
I went back to the leaked official GB, using odin, then rooted the phone again , the flashed the kernel with recovery, then wiped everything and then flashed CM10, still gave me the same message and no I don't have an external, only internal SD.
Sent from my Wildfire S A510e using xda premium
Click to expand...
Click to collapse
I would try a different ROM, see if the problem persist.
Did u get the error message when on stock gb kk4 ?
Or after u flash a Dev Rom are u restoring apps/data etc. through Titanium Backup ? Or as soon as u flash the Rom and it boots up, u get the error ?
Sent from my SAMSUNG-SGH-I777 using xda premium
I get the message on the 1st boot for every rom except the leaked gb! And I tried 3 different ROMs, will settle for Gb
Sent from my Wildfire S A510e using xda premium

Can't flash any other ROM

I have oat's CM10 installed but want to flash CM9 to use adobe flash. Whenever I try to install a CM9 ROM, I get stuck in an endless boot loop when I try to load it. I have tried the newest CM9 nightly and SGA's fat n creamy, and both get stuck in an endless boot loop. Here is what I do exactly:
Open TWRP, wipe system, cache, and dalvik, install ROM, install GAPPS, reboot.
Then it gets stuck in an endless boot loop.
Not sure if it matters, but every ROM I install (including CM10) can't find an MD5 file. Is this important? It doesn't seem to matter with CM10.
Sent from my cm_tenderloin using xda app-developers app
Wipe data? And TWRP version?
I haven't wiped data. TRWP 2.3.3
Sent from my cm_tenderloin using xda app-developers app
leesterz said:
I haven't wiped data. TRWP 2.3.3
Sent from my cm_tenderloin using xda app-developers app
Click to expand...
Click to collapse
I would try wiping data as well.
Just install this version of flash on CM10:
http://d-h.st/FsH
I got it from here:
http://forum.xda-developers.com/showthread.php?t=1774336
Works on Jelly Bean.

Can't flash Maclaw's all kind of ROM

I could not flash any of Maclaw's rom that is directly downloaded on maclaw's website. I don't know why. I'm using PX Recovery 4.0. What should I do? I want to use Maclaw's AOSP ICS. Kindly help me please.
try flashing official cwm 5.0.2.6 or latest
first revert to stock rom format your sd card in phone then flash the cwm and then try flashing any maclaw rom
you can search for zip file of cwm or go here and flash it via odin http://forum.xda-developers.com/showthread.php?t=1465599
HIT THANKS COS YOU WONT DIE
haha
Change to CWM recovery.
Sent from my GT-S5830 using xda app-developers app
Mandark52 said:
Change to CWM recovery.
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
i tried flashing his rom using cwm recovery. and it said the installation is bad or something. installation aborted.
As it says installation is bad then the zip file may not be fully downloaded OR it may be corrupted. The other roms r working right?
Sent from my GT-S5830 using xda app-developers app
Maclaw's site no more supports resume on downloads & there's a high probability that the file you downloaded is corrupted. Try downloading the file again.
Sent from my Galaxy Ace GT-S5830 using xda premium
Your sdcard might be corrupted too, so test the advice of fellow and if it doesn't work format your sdcard in FAT32 format using your pc or your phone and then try to flash the rom again

From overcome to cm11

Hi,
I need your help please. My tablet p1000 was softbricket and i used the whole Installation guide of overcome to get stock gingerbread on my tablet. It works fine but i want to use again cm11 on my tablet. The recovery is also overcome. Now my answer.
What do i have to do know to install cm11 on my p1000?
Thank you.
Hamburgo8855
Just grab cm11, and the correct gapps. Put them in your external sdcard
Boot to recovery and flash cm11, to be safe flash it 3 times.
Then flash gapps.
Then boot to the new ROM.
Sent from my GT-P1000 using XDA Free mobile app
I tried this way, not 3 times but the installation aborted. And after this, it did not start the overcome recovery but the old recovery cwm that was installed on the tablet befor i installed overcome.
You are doing it wrong.
Firstly there is no older cwm.
The gb stock safe v5 is having stock recovery.
Once you flash overcome kernel you get cwm5.
You use it to flash cm11 3 times. Without wiping or rebooting in between.
Then flash gapps. Only then you reboot.
Sent from my GT-N7100 using XDA Free mobile app
Hallo priyana,
Do I have to make a full wipe before flashing cm 11 3 times? Or just go to the recovery and install the cm11 3 times and after this flashing the gapps?
Thx
Hamburgo8855
No harm to do full wipe.
Sent from my GT-N7100 using XDA Free mobile app

Categories

Resources