I have oat's CM10 installed but want to flash CM9 to use adobe flash. Whenever I try to install a CM9 ROM, I get stuck in an endless boot loop when I try to load it. I have tried the newest CM9 nightly and SGA's fat n creamy, and both get stuck in an endless boot loop. Here is what I do exactly:
Open TWRP, wipe system, cache, and dalvik, install ROM, install GAPPS, reboot.
Then it gets stuck in an endless boot loop.
Not sure if it matters, but every ROM I install (including CM10) can't find an MD5 file. Is this important? It doesn't seem to matter with CM10.
Sent from my cm_tenderloin using xda app-developers app
Wipe data? And TWRP version?
I haven't wiped data. TRWP 2.3.3
Sent from my cm_tenderloin using xda app-developers app
leesterz said:
I haven't wiped data. TRWP 2.3.3
Sent from my cm_tenderloin using xda app-developers app
Click to expand...
Click to collapse
I would try wiping data as well.
Just install this version of flash on CM10:
http://d-h.st/FsH
I got it from here:
http://forum.xda-developers.com/showthread.php?t=1774336
Works on Jelly Bean.
Related
Well, next thing is going on. I have installed many roms and every time was a succes. Never ever went anything wrong. Now i am trying to install ics roms, cmw gives an error when he is "opening update package". I have tried cm9 build4 and paranoidandroid latest version. I wipe cache, factory set, then i format system and mount system. Then install from sd card and chose update package. What am i doing wrong¡!!
Sent from my GT-I9001 using xda premium
Ps. Sorry for bad english
Sent from my GT-I9001 using xda premium
Have you a external sd (µSD) ?
if yes, remove it and try again
Same problem...
Sent from my GT-I9001 using xda premium
Few times ago, I got the same problem and I think I solved it with an update of ClockWork Recovery Mod
I downloaded rom manager from app store and hit the "flash clockworkmod recovery" . Then there came a list with phone models, but the gt-i9001 wasnt included, so i chose gt-i9000, i hope that wont be a problem. Next i went into recovery mode, there i saw i was using feamod 1.4 based on cmw 5.5.0.4. After little bit of googling i found that this is the latest cmw vesion... So i backuped my current rom (BlazR ultimate). Wiped everything, format system, chose zip from sdcard and tried the kang version of cm9. Also tried the cm9 normal build4 and tge paranoidandroid but all failed. Just for trying i tried to flash the blazR Rom again, wich has firmware 2.3.6, but this went perfect. So how can it be that my cmw only flashes non-ics roms?
Sent from my GT-I9001 using xda premium
Nevermind. Allready solved. The feamod cmw recoverys dont support ics.. soort i flashed team win recovery
Sent from my GT-I9001 using xda premium
After flashing SGA's FatnCreamy Rom on twrp I wiped cache dalvik
Then I flashed his Gamerz kernel and wiped dalvik cache
After that I flashed the latest gapps and hit reboot system in twrp
Well it rebooted and it automatically selected Cyanogenmod on moboot
It was loading and suddenly just rebooted and did the same thing over and over again
Can anyone help me?
Sent from my HTC One S using xda app-developers app
mikennite said:
After flashing SGA's FatnCreamy Rom on twrp I wiped cache dalvik
Then I flashed his Gamerz kernel and wiped dalvik cache
After that I flashed the latest gapps and hit reboot system in twrp
Well it rebooted and it automatically selected Cyanogenmod on moboot
It was loading and suddenly just rebooted and did the same thing over and over again
Can anyone help me?
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
Was it the Nov12/12 ROM, that one is currently not compatible with the GamerZ Kernel
Oh
Sent from my HTC One S using xda app-developers app
I got the boot loop as well after flashing gamerz kernel with the Unofficial CM with the working camera.
Bummer.
sent from a secret underground bunker
Hi all,
I have a problem with this ROM
http://forum.xda-developers.com/showthread.php?t=2203700
I install the .zip file with CMW.
After wipe data/factory reset, wipe cache partition, wipe dalvik cache, format system I reboot.
And the phone does not boot.
It stops at the LG logo.
Any solutions?
I tried also with TWRP
UncleRipper said:
Hi all,
I have a problem with this ROM
http://forum.xda-developers.com/showthread.php?t=2203700
I install the .zip file with CMW.
After wipe data/factory reset, wipe cache partition, wipe dalvik cache, format system I reboot.
And the phone does not boot.
It stops at the LG logo.
Any solutions?
I tried also with TWRP
Click to expand...
Click to collapse
After the procedures you should install, not install and after wipe data etc... etc...
Sent from my LG-P880 using xda app-developers app
Big mistake !
UncleRipper said:
Hi all,
I have a problem with this ROM
http://forum.xda-developers.com/showthread.php?t=2203700
I install the .zip file with CMW.
After wipe data/factory reset, wipe cache partition, wipe dalvik cache, format system I reboot.
And the phone does not boot.
It stops at the LG logo.
Any solutions?
I tried also with TWRP
Click to expand...
Click to collapse
Dude 1st: format/wipe everything
2nd: install/flash rom
still nothing...
I install it again without re-flashing kdz
is it right?
or I need to flash the kdz, wipe all then install?
now I use TWRP recovery.
UncleRipper said:
still nothing...
I install it again without re-flashing kdz
is it right?
or I need to flash the kdz, wipe all then install?
now I use TWRP recovery.
Click to expand...
Click to collapse
Probably now you have some kind of tutti-frutti of files in your phone...
Better flash your phone with .kdz or other method, after that follow the tutorial.
Did you flash from ICS? You need to be on V20 (JB) before you flash it.
Sent from my LG-P880 using Tapatalk 2
exFAT said:
Did you flash from ICS? You need to be on V20 (JB) before you flash it.
Sent from my LG-P880 using Tapatalk 2
Click to expand...
Click to collapse
Yes, of course I am on v20a ROM. I have unlock he bootloader and install unsecure boo and the TWRP recovery.
UncleRipper said:
Yes, of course I am on v20a ROM. I have unlock he bootloader and install unsecure boo and the TWRP recovery.
Click to expand...
Click to collapse
Oh, just realised you stated you formatted system. You're not supposed to do that since /system contains the ROM, so it wouldn't boot past kernel logo.
Sent from my LG-P880 using Tapatalk 2
R: [Q] about ROM JB Zaiben by Siauka
Then what I could do?
Now I am on v20a with TWRP installed.
I need to reboot into recovery, do a factory reset, system wipe, cache wipe, data wipe and then install?
TWRP is the same of CMW?
Thanks
Sent from my LG-P880 using xda app-developers app
UncleRipper said:
Then what I could do?
Now I am on v20a with TWRP installed.
I need to reboot into recovery, do a factory reset, system wipe, cache wipe, data wipe and then install?
TWRP is the same of CMW?
Thanks
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
"FIRST You need:
Flash to orginal JB 4.1.2 20a
Unlock bootloader
Install CWM 6.0.2.8+unsecure boot http://forum.xda-developers.com/show....php?t=2180138
Install tutorial:
1. Place Z.0.1.zip in to your internal sdcard
2. BACKUP ALL YOUR DATA with CWM Recovery
3. In CWM Recovery make wipe data/factory reset, wipe cache partition, wipe dalvik cache, format system
4. Flash Z.0.1.zip from sdcard
5. Done"
R: [Q] about ROM JB Zaiben by Siauka
Thanks,
but now terminal emulator says that it didn't find the files for recovery and unsecure boot
What to do?
Sent from my LG-P880 using xda app-developers app
UncleRipper said:
Thanks,
but now terminal emulator says that it didn't find the files for recovery and unsecure boot
What to do?
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Did you copy them back to internal storage after factory reset???
R: [Q] about ROM JB Zaiben by Siauka
RuedasLocas said:
Did you copy them back to internal storage after factory reset???
Click to expand...
Click to collapse
Yes
Sent from my LG-P880 using xda app-developers app
UncleRipper said:
Yes
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
I sugest you to use adb instead of terminal.
Once that you facrtory reseted the phone, check if you didn't forgot nothing... root, etc...
Try install SuperSU if you have Superuser.
R: [Q] about ROM JB Zaiben by Siauka
Thanks
I'll report you back.
Sent from my LG-P880 using xda app-developers app
R: [Q] about ROM JB Zaiben by Siauka
hi, I'm back with another problem: how to remove some horribles lines from my screen??
they are appeared after restore from twrp recovery.
but they seems to be an hardware problem...
I don't know
the restore was needed because of another failed flash of the rom in the title of this thread...
thanks
Sent from my LG-P880 using xda app-developers app
UncleRipper said:
hi, I'm back with another problem: how to remove some horribles lines from my screen??
they are appeared after restore from twrp recovery.
but they seems to be an hardware problem...
I don't know
the restore was needed because of another failed flash of the rom in the title of this thread...
thanks
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
If its a hardware issue you should had it before...
You tried to do a clean install?
I flashed the latest unofficial port of CM 10.1 jelly bean by rohan007 for the galaxy mini using Clockwork recover 4.0.0.5. It wont reboot. It is stuck at samsung logo. please help. Thanks.
gaurdjatixa said:
I flashed the latest unofficial port of CM 10.1 jelly bean by rohan007 for the galaxy mini using Clockwork recover 4.0.0.5. It wont reboot. It is stuck at samsung logo. please help. Thanks.
Click to expand...
Click to collapse
Wipe data, cache, dalvik cache before and after flashing rom
Sent from my GT-S5570 using xda premium
vishal007 said:
Wipe data, cache, dalvik cache before and after flashing rom
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
Tried it. still stuck :/ I also tried flashing the official CM. It does not work also.
vishal007 said:
Wipe data, cache, dalvik cache before and after flashing rom
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
Do a clear install. Follow these steps:
1. Wipe data/cache,
2. Wipe cache partition,
3. Wipe dalvik cache,
4. Format /system(necessary),
5. Install zip from SD card as usual,
6. Reboot ur system.
Good Luck...!!!:thumbup:
Sent Via XDA™ Premium
gaurdjatixa said:
I flashed the latest unofficial port of CM 10.1 jelly bean by rohan007 for the galaxy mini using Clockwork recover 4.0.0.5. It wont reboot. It is stuck at samsung logo. please help. Thanks.
Click to expand...
Click to collapse
Use clockwork recovery version 5 above and if still not work than flash stock rom via odin, after it turn on try all things again (from root to custom recovry)
Sent from my GT-S5570 using xda premium
Hi,
I need your help please. My tablet p1000 was softbricket and i used the whole Installation guide of overcome to get stock gingerbread on my tablet. It works fine but i want to use again cm11 on my tablet. The recovery is also overcome. Now my answer.
What do i have to do know to install cm11 on my p1000?
Thank you.
Hamburgo8855
Just grab cm11, and the correct gapps. Put them in your external sdcard
Boot to recovery and flash cm11, to be safe flash it 3 times.
Then flash gapps.
Then boot to the new ROM.
Sent from my GT-P1000 using XDA Free mobile app
I tried this way, not 3 times but the installation aborted. And after this, it did not start the overcome recovery but the old recovery cwm that was installed on the tablet befor i installed overcome.
You are doing it wrong.
Firstly there is no older cwm.
The gb stock safe v5 is having stock recovery.
Once you flash overcome kernel you get cwm5.
You use it to flash cm11 3 times. Without wiping or rebooting in between.
Then flash gapps. Only then you reboot.
Sent from my GT-N7100 using XDA Free mobile app
Hallo priyana,
Do I have to make a full wipe before flashing cm 11 3 times? Or just go to the recovery and install the cm11 3 times and after this flashing the gapps?
Thx
Hamburgo8855
No harm to do full wipe.
Sent from my GT-N7100 using XDA Free mobile app