Database Develop

[Q] overcome rom

Hi,
device info:-
samsung galaxy tab p1000
running 2.3.3 stock firmware
rooted with doomslord kit
i am new to flashing an android
i have downloaded and decrypted a firmware from checkfus downloader
question:-
1. Is the overcome's stock safe v5 zip and the checkfus downloaded zip same???
Please reply asap.
Wholehearted thanks for your help

I think checkfus downloads are many. You can't compare. They differ even amongst each other.
Overcome stock safe zip is not just a rom.
It is a package containing Odin, drivers, and modem radios, as well as JQ1 stock rom.
Sent from my GT-P1000 using XDA

Thanks Priyana,
heard a lot about you, great helper and developer. just need a little help...
i am a complete newbie in flashing android. matter of fact i havent even once rebooted my phone into download or recovery mode.
i did a factory reset today...i need a complete step by step guide to flash overcome kernel 4.0.0 via mobile odin and aokp build 38 later.....
please help....
thanks

When you say factory reset do you mean the "Factory data reset" under privacy? or did you successfully install the Safe-Stock-Rom from Overcome's website?
There is a complete guide to how go from stock rom to Overcome 4.1.0 here: http://www.teamovercome.net/p1000/?page_id=17
I successfully completed it the other day and works perfectly on my Galaxy Tab.

SGTABHI said:
Thanks Priyana,
heard a lot about you, great helper and developer. just need a little help...
i am a complete newbie in flashing android. matter of fact i havent even once rebooted my phone into download or recovery mode.
i did a factory reset today...i need a complete step by step guide to flash overcome kernel 4.0.0 via mobile odin and aokp build 38 later.....
please help....
thanks
Click to expand...
Click to collapse
Hi SGTABHI,
You have heard wrongly. I am not a dev, just a busy body trying to help
Dimitrix points rightly to overcome guide.
The images there are broken, so go here instead
Go to
http://forum.xda-developers.com/showthread.php?p=20974872
See the guy phlooke posted a cached copy of the overcome guide.
Download it, it is a .PNG graphic file.
Now, you don't need to go through the whole restocking. We only need an overcome kernel 4.0 so that you have cwm.
So,
1) download overcome 4.0 kernel tar file and keep it in your PC
2) download aokp build 38 and gapps-ics from the link in aokp post. Put both on external SD card.
3) read the guide and jump to the part that guides you to flash overcome kernel.
Make sure Odin can see your tab and everything looks exactly like in the picture.
4) flash the overcome kernel and the tab will reboot. There will be a female robotic voice. Stimpz0r recommend no need to wait for finish. Just force power off the tab.
5) power up to recovery by pressing volume up and power button.
I find it a bit tricky sometimes, maybe the way I hold the button. But you will get there.
6) from cwm recovery, choose to install update from external SD card and browse to aokp zip file and install. Some message about checking bml/mtd and you see the tab reboot.
7) you may get a boot loop, it may not boot into recovery, or it may go direct back to recovery. If it does that it is normal.
First time coming from bml to mtd will do that.
Just flash aokp one more time.
You will notice the cwm is not the overcome one anymore. It looks similar but it is not. You will have to browse to internal SD card instead, because this recovery somehow calls your external SD as internal SD.
8) so flash aokp again, and when completed, flash gapps-ics
9) when completed just reboot and sit back and wait till it is done!
Remember if anything go wrong you may have to restock to gb stock safe. But quite unlikely.
Good luck.
Sent from my GT-P1000 using XDA

I have just wasted quite a bit of your time. Seems like you are asking about Mobile Odin !
But anyway it should be the same.
Just put overcome kernel tar in sdcard and use mobile Odin to flash it.
I am not familiar with mobile Odin, but it should match closely to Odin.
One guy even told me it works for restocking to stock safe!
Sent from my GT-P1000 using XDA

i did a factory reset through privacy.....
thanks for helping.....is there any chance of bricking my tab
incase i brick it can i flash the checkfus downloaded via odin in download mode
thanks once again

Little chance to brick.
Brick only happens if you broke the boot loader.
Yes, I guess flashing checkfus download via Odin should kind if "restock".
Sent from my GT-P1000 using XDA

here is a complete tutorial of how to flash overcome with all the images on a pdf file, http://forum.xda-developers.com/showthread.php?t=1500820
Sent from my GT-P1000 using Tapatalk 2

priyana said:
Hi SGTABHI,
......
Now, you don't need to go through the whole restocking. We only need an overcome kernel 4.0 so that you have cwm.
So,
1) download overcome 4.0 kernel tar file and keep it in your PC
2) download aokp build 38 and gapps-ics from the link in aokp post. Put both on external SD card.
3) read the guide and jump to the part that guides you to flash overcome kernel.
Make sure Odin can see your tab and everything looks exactly like in the picture.
4) flash the overcome kernel and the tab will reboot. There will be a female robotic voice. Stimpz0r recommend no need to wait for finish. Just force power off the tab.
5) power up to recovery by pressing volume up and power button.
I find it a bit tricky sometimes, maybe the way I hold the button. But you will get there.
6) from cwm recovery, choose to install update from external SD card and browse to aokp zip file and install. Some message about checking bml/mtd and you see the tab reboot.
7) you may get a boot loop, it may not boot into recovery, or it may go direct back to recovery. If it does that it is normal.
First time coming from bml to mtd will do that.
Just flash aokp one more time.
You will notice the cwm is not the overcome one anymore. It looks similar but it is not. You will have to browse to internal SD card instead, because this recovery somehow calls your external SD as internal SD.
8) so flash aokp again, and when completed, flash gapps-ics
9) when completed just reboot and sit back and wait till it is done!
.....
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
This is the BEST AOKP install instruction I've ever seen! I will bookmark this for reference just in case anyone need this.

Priyana, thanks a lot for the guidea mate, very helpful.
Thinking of flashing my Tab with CM9. Some questions though.
How easy will it be for me to revert from ICS straight back to Overcome? Can I just flash Overcome kernel again, then flash Overcome ROM?
Will that work?
Also quick question while we are here, how stable is ICS? Can it play 3D games like Fifa and Nova without crashing?
Cheers mate!
Sent from my GT-P1000 using xda premium

olyloh6696 said:
Priyana, thanks a lot for the guidea mate, very helpful.
Thinking of flashing my Tab with CM9. Some questions though.
How easy will it be for me to revert from ICS straight back to Overcome? Can I just flash Overcome kernel again, then flash Overcome ROM?
Will that work?
Also quick question while we are here, how stable is ICS? Can it play 3D games like Fifa and Nova without crashing?
Cheers mate!
Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse
No, you will need to do repartition with the correct pit file to go back to GB. You will need to do it via odin or heimdell.
ICS now is quite stable for daily use. but some lags in some 3d games.

Thanks a lot priyana...
I successfully updated my tab to aokp ics.....an everything is just fine and perfect.......only the first boot scared me to death as it took 5 mins but after that only 10 secs...thanks a ton
bluetooth receives every format except apk..... any solution?????

Some sort if security I think.
The only way is to rename it first.
I might be wrong.
Sent from my GT-P1000 using xda app-developers app

SGTABHI said:
Thanks a lot priyana...
I successfully updated my tab to aokp ics.....an everything is just fine and perfect.......only the first boot scared me to death as it took 5 mins but after that only 10 secs...thanks a ton
bluetooth receives every format except apk..... any solution?????
Click to expand...
Click to collapse
10 sec boot?? My tab takes 2-3 mins to boot: first 2 boot logos, then black screen(1.5 mins), then laggy boot animation (1 min). Is that normal? B#38
Sent from my GT-P1000 using Tapatalk 2

I found out a solution......use Bluetooth explorer by medieval soft....and install it on both android devices...the received and the sharing device....then open it's directory and it's done......
10 secs thing was written out of ecstasy..... but my tab takes no longer than 20 secs......
Priyana can you guide me about changing the default boot animation .....
Your guides are perfect....
Sent from my GT-P1000 using xda app-developers app

SGTABHI said:
I found out a solution......use Bluetooth explorer by medieval soft....and install it on both android devices...the received and the sharing device....then open it's directory and it's done......
10 secs thing was written out of ecstasy..... but my tab takes no longer than 20 secs......
Priyana can you guide me about changing the default boot animation .....
Your guides are perfect....
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Hi,
Sorry, I am not that well versed in boot animation.
But one member, yappoe, have done a few alternative animations and he posted them on theme sub forum.
You can have a look there.
Sent from my GT-P1000 using xda app-developers app

How can i remove status bar while playing games...i want them fullscreen...i tried enabling shadow mode...pls help

priyana said:
Hi,
Sorry, I am not that well versed in boot animation.
But one member, yappoe, have done a few alternative animations and he posted them on theme sub forum.
You can have a look there.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
As long as you installed AOKP SGT7 or CM9 correctly you shoul have root access.
1. Download Root Explorer from Google Play store if you don't have one yet.
2. Download the bootanimation zip file and rename it to bootanimation.zip
3. Using Root Explorer, go to /system/media folder. Change access to R/W by click the R/W button on the top.
4. Find and rename the original bootanimation.zip to origboot.zip.bak.
5. Move the new downloaded bootanimation.zip to /system/media
SGTABHI said:
How can i remove status bar while playing games...i want them fullscreen...i tried enabling shadow mode...pls help
Click to expand...
Click to collapse
IN AOKP SGT7:
1.Go to System Settings > Rom Manager> Navigation Bar > tick Auto hide.
This only work if the games or apps actually support auto full screen.
2. On home screen, Add > Shortcut > System UI >Toggle NavBar
This will allow you to manually do hide NavBar/status bar for full screen.
3. Go to System Settings > Rom Manager > Power Menu Options > tick Show Navigation Toggle. When you want full screen, just long press power button, you will notice new Navigation Bar Controls toggles. Press the power toggle under there.

The ebook app from original samsung doesn't work in aokp....app not installed......any solution....one of the best apps i've ever seen

[Q] Stuck in CWM 5.0.2.6 Recovery - Flashing ROMS doesn't work

Hey,
I am trying to fix a friends optimus black. He has CWM recovery installed but when I flash ROMs then reboot system, it just boots straight back to the recovery. Is there anything I am doing wrong? I have tried 3 different ROMs from the dev section, ICS, GB and JB. I make sure to do a full wipe between flashing.
Many thanks, as I don't have much experience with this phone. (Although I have many years experience with flashing android roms)

RolloJarvis said:
Hey,
I am trying to fix a friends optimus black. He has CWM recovery installed but when I flash ROMs then reboot system, it just boots straight back to the recovery. Is there anything I am doing wrong? I have tried 3 different ROMs from the dev section, ICS, GB and JB. I make sure to do a full wipe between flashing.
Many thanks, as I don't have much experience with this phone. (Although I have many years experience with flashing android roms)
Click to expand...
Click to collapse
Reflash with Smart Flash Tool. A few kernels automatically go to recovery if they fail to load. I can't think of anything else.

Try changing your CWM Recovery by flashing another version. Use my CWM Recovery flasher (in my signature).

thanks, i tried changing CWM using your flasher, but it still didnt work.
I cant use the smartflasher as all the links are broken...

RolloJarvis said:
thanks, i tried changing CWM using your flasher, but it still didnt work.
I cant use the smartflasher as all the links are broken...
Click to expand...
Click to collapse
Did you go in to s/w upgrade mode?and did you use the links in n00by's how-to guide?
Sent from my LG-P970 using xda app-developers app

UniversalSS said:
Did you go in to s/w upgrade mode?and did you use the links in n00by's how-to guide?
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Yes but the links in the guide link to the smart flasher thread where the links are broken... So I can't use the tool. Any ideas?

RolloJarvis said:
Yes but the links in the guide link to the smart flasher thread where the links are broken... So I can't use the tool. Any ideas?
Click to expand...
Click to collapse
What do you need? Some ROMs to flash? Find links to kdz files in post 3. Extract and root it yourself (also see post 3 on my how to).

might be redundant saying this but in cwm itself have you flashed the 6.0.1.4 update within itself ald?

N00BY0815 said:
What do you need? Some ROMs to flash? Find links to kdz files in post 3. Extract and root it yourself (also see post 3 on my how to).
Click to expand...
Click to collapse
I was trying to follow the unbricking guide in this thread: http://forum.xda-developers.com/showthread.php?t=1448803
but the links for the following are broken:
stock ROM V10A EEU XXX with .bin & .fls. [CRC MD5: d880b8834400575b5827bafbf29a745e] - DepositFiles, FileServe, WUpload.
Other bin/fls ROMs are HERE. (All these links are working again!)
You need to install LG Mobile drivers. They are located HERE. [CRC MD5: e4614071e72c0292d3a8238908b5c7ba]
Click to expand...
Click to collapse
Also, I am on CWM 6.0.1.4 but now I get an error when I try to choose a zip from the SD card "E: Can't mount /sdcard"
Cheers for the help.
EDIT: managed to find the files... will update soon.
EDIT 2: Flashed the official firmware with smart flasher, now im in a bootloop with the "firmware update" screen, first I had a BSOD.
Im about to flash the V20a files using smart flasher. fingers crossed.
EDIT 3: Flashing worked via smart flashing tool... BUT I'M STILL STUCK IN CWM RECOVERY!
any ideas?
Thanks

RolloJarvis said:
I was trying to follow the unbricking guide in this thread: http://forum.xda-developers.com/showthread.php?t=1448803
but the links for the following are broken:
Also, I am on CWM 6.0.1.4 but now I get an error when I try to choose a zip from the SD card "E: Can't mount /sdcard"
Cheers for the help.
EDIT: managed to find the files... will update soon.
EDIT 2: Flashed the official firmware with smart flasher, now im in a bootloop with the "firmware update" screen, first I had a BSOD.
Im about to flash the V20a files using smart flasher. fingers crossed.
EDIT 3: Flashing worked via smart flashing tool... BUT I'M STILL STUCK IN CWM RECOVERY!
any ideas?
Thanks
Click to expand...
Click to collapse
Wipe data, cache, then go to advanced, wipe dalwik, go back, go to mounts&Storage, mount as mass storage device, put any ROM you want on your sd card, go back, install zip from sd card, choose zip and install the ROM you downloaded

N00BY0815 said:
Wipe data, cache, then go to advanced, wipe dalwik, go back, go to mounts&Storage, mount as mass storage device, put any ROM you want on your sd card, go back, install zip from sd card, choose zip and install the ROM you downloaded
Click to expand...
Click to collapse
I have just done exactly these steps. I have tried flashing both the zeus rom and AOKP jelly bean build 4. Each time the ROM flashes successfully, however when I select "reboot system now," it just boots straight back to recovery again...
The only thing I could think of trying would be to restore a nandroid with cwm. I dont have one though, can anyone link me to a working nandroid, or upload one?
thanks

A crazy idea......
Stuck G key?
Sent from my LG-P970 using xda premium

could be... I havent got the phone at the moment but ill check next week. Not sure how i'd fix it though

got the phone back again... when i go into CWM "Key Test" option, it implies "button 0" is being pressed repetitively. Anyone know which button this is?

[Q] How to install CM9 Fat n Creamy ROM?

Hello,
Today for the first time I installed Android on my touchpad(I know I am very late to the party!). I first tried to install the Fat n Creamy ROM(12/02 build)sing ACMEInstaller2 with the ROM zipfile, moboot 0.35 and gapps zipfile in cminstall folder. After flashing the ROM, which I believe didn't properly happen due to some incompatibility or incorrect install method, and so on reboot after flashing I got no option for android in moboot, only webos, reboot and shutdown options were there. Then i retried by putting just the ROM in cminstall folder, which didn,t work either. So I ended up installing official CM9 ROM for now using the update tenderloin zip file, CM9 zip file, moboot and gapps fix in the cminstall folder, which worked perfectly and I am typing this from it! But now I want the Fat n Creamy ROM...how do I install it? Can I install it on top of this or do I have to format and reinstall? If so, how do I do it? Thanks!

lucky88shp said:
Hello,
Today for the first time I installed Android on my touchpad(I know I am very late to the party!). I first tried to install the Fat n Creamy ROM(12/02 build)sing ACMEInstaller2 with the ROM zipfile, moboot 0.35 and gapps zipfile in cminstall folder. After flashing the ROM, which I believe didn't properly happen due to some incompatibility or incorrect install method, and so on reboot after flashing I got no option for android in moboot, only webos, reboot and shutdown options were there. Then i retried by putting just the ROM in cminstall folder, which didn,t work either. So I ended up installing official CM9 ROM for now using the update tenderloin zip file, CM9 zip file, moboot and gapps fix in the cminstall folder, which worked perfectly and I am typing this from it! But now I want the Fat n Creamy ROM...how do I install it? Can I install it on top of this or do I have to format and reinstall? If so, how do I do it? Thanks!
Click to expand...
Click to collapse
Just DL the SGA Rom to your tablet and flash it with recovery .

more specific instructions please...
sstar said:
Just DL the SGA Rom to your tablet and flash it with recovery .
Click to expand...
Click to collapse
What do you mean when u say flash it with recovery? Isn't using ACMEInstaller method done in recovery mode? Can you be more specific?I apologize for my ignorance...

lucky88shp said:
What do you mean when u say flash it with recovery? Isn't using ACMEInstaller method done in recovery mode? Can you be more specific?I apologize for my ignorance...
Click to expand...
Click to collapse
No , I mean when you boot up among the choices you have will be either clockwork or TWRP that is the recovery I am referring to , either will give you the option to install a DL zip.
What are you using ?

sstar said:
No , I mean when you boot up among the choices you have will be either clockwork or TWRP that is the recovery I am referring to , either will give you the option to install a DL zip.
What are you using ?
Click to expand...
Click to collapse
I noticed I do not have any option for CWM or TWRP in the moboot at restart, only webos, webos recovery, cyanogenmod, reboot and shutdown. But I do have CWM installed as I just updated it, I can just go to the ROM manager in the apps and start CWM flash recovery from it...can I do it that way? Also can just flash the ROM on top of my current CM9 installation and will my apps be deleted?

lucky88shp said:
I noticed I do not have any option for CWM or TWRP in the moboot at restart, only webos, webos recovery, cyanogenmod, reboot and shutdown. But I do have CWM installed as I just updated it, I can just go to the ROM manager in the apps and start CWM flash recovery from it...can I do it that way? Also can just flash the ROM on top of my current CM9 installation and will my apps be deleted?
Click to expand...
Click to collapse
You can do that and if you flash without doing a system wipe you will retain all your apps.
Possibly an easier way for you would be to DL Goo manager from play store and then install open recovery script which will appear as shown in the screenshot below after you hit the 3 dots in the top right hand corner. Say yes to everything and it will install the latest TWRP for you.
You could then use goo to browse compatible Roms and DL SGA's and use it to flash the Rom/zip for you as shown in the second pic.
Which ever method you choose do make a backup before with your preferred recovery either CWM or TWRP.
I hope this helps.
Sent from my cm_tenderloin using Tapatalk 2

sstar said:
You can do that and if you flash without doing a system wipe you will retain all your apps.
Possibly an easier way for you would be to DL Goo manager from play store and then install open recovery script which will appear as shown in the screenshot below after you hit the 3 dots in the top right hand corner. Say yes to everything and it will install the latest TWRP for you.
You could then use goo to browse compatible Roms and DL SGA's and use it to flash the Rom/zip for you as shown in the second pic.
Which ever method you choose do make a backup before with your preferred recovery either CWM or TWRP.
I hope this helps.
Sent from my cm_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
One last question, which one would you say is better, the latest Nightly from CM team as of today's release or the Fat n Creamy? And yeah, would you happen to know how to get the CWM recovery option in the moboot menu? Thanks a lot for all your help!

lucky88shp said:
One last question, which one would you say is better, the latest Nightly from CM team as of today's release or the Fat n Creamy? Thanks a lot for all your help!
Click to expand...
Click to collapse
Probably the nightly but only because it is the most recent. However whichever you initially go for make a backup then try the other and make another backup that way you can relatively easily switch between the two in order to decide which you prefer.
Have fun.
---------- Post added at 09:43 PM ---------- Previous post was at 09:37 PM ----------
lucky88shp said:
One last question, which one would you say is better, the latest Nightly from CM team as of today's release or the Fat n Creamy? And yeah, would you happen to know how to get the CWM recovery option in the moboot menu? Thanks a lot for all your help!
Click to expand...
Click to collapse
Just saw the edit, DL Rom toolbox lite and edit the default recovery but it should show up in moboot anyway.
Can you post a screenshot of your boot folder please.

sstar said:
Probably the nightly but only because it is the most recent. However whichever you initially go for make a backup then try the other and make another backup that way you can relatively easily switch between the two in order to decide which you prefer.
Have fun.
---------- Post added at 09:43 PM ---------- Previous post was at 09:37 PM ----------
Just saw the edit, DL Rom toolbox lite and edit the default recovery but it should show up in moboot anyway.
Can you post a screenshot of your boot folder please.
Click to expand...
Click to collapse
LOL, where is the boot folder? I searched via the File Browser, and couldn't find it....And how do I take a screenshot?

lucky88shp said:
LOL, where is the boot folder? I searched via the File Browser, and couldn't find it....And how do I take a screenshot?
Click to expand...
Click to collapse
Use Rom toolbox , screenshot should be an option when holding the power off button , you sound a little bit new to this lark (I only started 6 months ago) so don't worry if you can't find it.
Can/ have you actually gone into CWM as I am not sure that it's installed because it would/should show in the moboot menu.
Check and let me know. If its not I think Goo manager and TWRP may be an easier option.

sstar said:
Use Rom toolbox , screenshot should be an option when holding the power off button , you sound a little bit new to this lark (I only started 6 months ago) so don't worry if you can't find it.
Can/ have you actually gone into CWM as I am not sure that it's installed because it would/should show in the moboot menu.
Check and let me know. If its not I think Goo manager and TWRP may be an easier option.
Click to expand...
Click to collapse
Here are the screens for boot folder. And as I mentioned before I believe I have CWM installed as the first thing that popped after flashing the ROM was an update for CWM.

According to your screenshots (Well done). You don't as there is no ulimage called CWM/ clockwork or TWRP . I suggest the Goo route to install TWRP once done it is VERY user friendly, then you can make backups before proceeding any further, then if you wish and are not happy use is to install a CWM zip.

lucky88shp said:
Hello,
Today for the first time I installed Android on my touchpad(I know I am very late to the party!). I first tried to install the Fat n Creamy ROM(12/02 build)sing ACMEInstaller2 with the ROM zipfile, moboot 0.35 and gapps zipfile in cminstall folder. After flashing the ROM, which I believe didn't properly happen due to some incompatibility or incorrect install method, and so on reboot after flashing I got no option for android in moboot, only webos, reboot and shutdown options were there. Then i retried by putting just the ROM in cminstall folder, which didn,t work either. So I ended up installing official CM9 ROM for now using the update tenderloin zip file, CM9 zip file, moboot and gapps fix in the cminstall folder, which worked perfectly and I am typing this from it! But now I want the Fat n Creamy ROM...how do I install it? Can I install it on top of this or do I have to format and reinstall? If so, how do I do it? Thanks!
Click to expand...
Click to collapse
Can you post the acmeinstaller2 zip? I cannot find it

sstar said:
According to your screenshots (Well done). You don't as there is no ulimage called CWM/ clockwork or TWRP . I suggest the Goo route to install TWRP once done it is VERY user friendly, then you can make backups before proceeding any further, then if you wish and are not happy use is to install a CWM zip.
Click to expand...
Click to collapse
K thanks...I noticed too that there was no image file for CWM. I will go the goo manager route. Again, thanks a lot for all your help, really appreciate it!

ScottBroker said:
Can you post the acmeinstaller2 zip? I cannot find it
Click to expand...
Click to collapse
You should really upgrade to 3 available here http://goo.im/devs/jcsullins/cmtouchpad/testing/ACMEInstaller3
But here is 2 anyway https://www.box.com/shared/32e48b3b777f2bfc7866

ScottBroker said:
Can you post the acmeinstaller2 zip? I cannot find it
Click to expand...
Click to collapse
Here it is. Download the novacom drivers and its included with it.
http://tinyurl.com/brfuvqn

RemICS

Hello guys,
i have succesfully flashed the new RemICS rom. It's works fine. When i will install the new addonpack, it's still show the bootanimation. I wait for 30 min but nothing happened. I try it 3 times but nothings change. I come from ICS 4.3. Can anyone please help me out?
And yes... I follow the installation steps.
Rom link: http://forum.xda-developers.com/showthread.php?t=2427514
Thanks,
Marvin
PS: Sorry for my bad english.

Did you try to do a full wipe?
Sent from my GT-I9001 using xda app-developers app

KiLLAH89 said:
ICS 4.3
Click to expand...
Click to collapse
4.3 is Jelly Bean (JB), not ICS (..."I scream sand witch"....) could it be that you 've flashed wrong Gapps version?

käsebr0t:45552591 said:
Did you try to do a full wipe?
Click to expand...
Click to collapse
Yes everytime i flashed it.
tetakpatak said:
4.3 is Jelly Bean (JB), not ICS (..."I scream sand witch"....) could it be that you 've flashed wrong Gapps version?
Click to expand...
Click to collapse
No, thats not possible, see http://forum.xda-developers.com/showthread.php?t=2427514. I flashed all this yesterday on it's release. Its run now, i install no performance tweaks from the AIO.

KiLLAH89 said:
Yes everytime i flashed it.
No, thats not possible, see http://forum.xda-developers.com/showthread.php?t=2427514. I flashed all this yesterday on it's release. Its run now, i install no performance tweaks from the AIO.
Click to expand...
Click to collapse
It is just name of the ROM, and the developer writes you clearly in the first blue field, in the first text line:
Android Base CM10.1.3. RC1 JellyBean
JellyBean is not ICS (ICS is 4.0.x) so you need Gapps for CM10.1x / Android 4.2.x
CyanogenMod 9 is based on ICS

HELP needed for RemICS Odin installation
Not sure whether to start a new thread or not so for the sake of making xda a little less cluttered i will first post my query here:
It refers to the RemICS ROM thread already mentioned
http://forum.xda-developers.com/showthread.php?t=2300693
This looks like a great ROM and i would like to do a one time flash using Odin
Are there any install methods using Odin. I see there is a full download on the page but it appears to be for a I9003. Have searched all over and not seen anything as yet
FYI: I am currently running DarkysROM JVQv10.2 Extreme Edition, firmware 2.3.4
Kernel Version 2.6.35.7-I9000XXJVQ-CL281085
thx in advance :good:

[email protected] said:
Not sure whether to start a new thread or not so for the sake of making xda a little less cluttered i will first post my query here:
It refers to the RemICS ROM thread already mentioned
http://forum.xda-developers.com/showthread.php?t=2300693
This looks like a great ROM and i would like to do a one time flash using Odin
Are there any install methods using Odin. I see there is a full download on the page but it appears to be for a I9003. Have searched all over and not seen anything as yet
FYI: I am currently running DarkysROM JVQv10.2 Extreme Edition, firmware 2.3.4
Kernel Version 2.6.35.7-I9000XXJVQ-CL281085
thx in advance :good:
Click to expand...
Click to collapse
This isn't meant to be flashed via Odin.
Download the rom + addons + gapps + CM9 (you don't need CM9 gapps). You can download the rom + addons from here: http://forum.xda-developers.com/showthread.php?t=2075058
1.) Backup everything you need to- call logs, SMS, bookmarks, etc with Titanium or other methods of your choice
2.) Reboot into recovery. Perform the three wipe combo (data, cache, Dalvik)
3.) Flash CM9. You'll probably have to flash it twice- once for the kernel, another time for the rom. Let it boot.
4.) Once CM9 has booted, check that you still have reception.
5.) Reboot into recovery again and do the wipe combo. This time choose to flash the base rom. You'll need to flash it three times- once due to the incompatible partition (first flash overcomes this), another time for the kernel, a third time for the rom.
6.) Once the base rom's finished flashing, reboot. Check you still have your IMEI- you'll know if you still have reception.
7.) Reboot to recovery, flash addons (flash Addons then Addons_V1)
8.) Reboot
9.) Back to recovery (AGAIN), flash gapps.
Unfortunately a one-time flash with Odin isn't possible. But the endless flashes you have to do for RemICS V6 is well worth it
Sent from my GT-P7510 using Tapatalk HD

thx for reply
thx for your reply and apologies for getting back to you late.
If only i could do it the way you suggested but for some reason (me) i have messed the phone so that it now no longer is able to mount the external SDCard so putting the relevent zip files on the ext card is useless because in recovery mode using CWM these files fail to show.
I note that via CWM it shows the card as unmounted. If i try and do a mount it fails.
any ideas?
thx
Lawrence
Soryuu said:
This isn't meant to be flashed via Odin.
Download the rom + addons + gapps + CM9 (you don't need CM9 gapps). You can download the rom + addons from here: http://forum.xda-developers.com/showthread.php?t=2075058
1.) Backup everything you need to- call logs, SMS, bookmarks, etc with Titanium or other methods of your choice
2.) Reboot into recovery. Perform the three wipe combo (data, cache, Dalvik)
3.) Flash CM9. You'll probably have to flash it twice- once for the kernel, another time for the rom. Let it boot.
4.) Once CM9 has booted, check that you still have reception.
5.) Reboot into recovery again and do the wipe combo. This time choose to flash the base rom. You'll need to flash it three times- once due to the incompatible partition (first flash overcomes this), another time for the kernel, a third time for the rom.
6.) Once the base rom's finished flashing, reboot. Check you still have your IMEI- you'll know if you still have reception.
7.) Reboot to recovery, flash addons (flash Addons then Addons_V1)
8.) Reboot
9.) Back to recovery (AGAIN), flash gapps.
Unfortunately a one-time flash with Odin isn't possible. But the endless flashes you have to do for RemICS V6 is well worth it
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse

[email protected] said:
thx for your reply and apologies for getting back to you late.
If only i could do it the way you suggested but for some reason (me) i have messed the phone so that it now no longer is able to mount the external SDCard so putting the relevent zip files on the ext card is useless because in recovery mode using CWM these files fail to show.
I note that via CWM it shows the card as unmounted. If i try and do a mount it fails.
any ideas?
thx
Lawrence
Click to expand...
Click to collapse
What about your internal storage?
Sent from my GT-P7510 using Tapatalk HD

Here is where my noob-ness kicks in.
What internal storage is available by default on the Note1? Is it just the internal sdcard?
what puzzled me when I last flashed with odin (repeated it a number of times as I was trying to get the device to recognise ext sd card) to get the current Darky Extreme rom on (which is working fine no problem at all) is that there was still some relic directory structure left over. These were all empty folders visible when navigating within CWM. Didn't matter what type of formatting I did they wouldn't go. To summarise: much confusion and something got twisted.
So questions arising are:
-How to nuke the internal disk/card properly so there are no remnants prior to me doing another darky reinstall?
-Then, how to copy a zip file to internal card but still have it remain after the format and wipes that would precede a zip install?
-How to fix the device to mount the ext sdcard? FYI other sdcards can't be mounted either. I have tried 4 different ones. And here's the kicker-once booted I go to file manager and there I can see and access all the files/folders on the external card!!! So it's definitely a phone problem as opposed to a sdcard problem. Something got flagged along the line.
Rgrds
Lawrence
Soryuu said:
What about your internal storage?
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse

[Q] How do you install CM 11 on i9305?

Hey guys I have a i9305 and my carrier is Vodafone (Australia) still hasn't released 4.4 yet.. So I've been on 4.3 for a while now, which is pretty disappointing. My mate was telling me that I could get 4.4 if I had CM, the only bad thing is that I've got no clue how to install.. Well I do but I can't find the right guide.. They either lack in the details/information on the install, there outdated or the videos are poorly made..
Could someone help me out and point in the right direction? Maybe leave a link or a video etc..? I also haven't touched or changed anything in my phone it is completely stock.
Thanks guys!

Thing you need:
1)An unlocked galaxy s3 (The I9305 version comes unlocked so dont worry)
2)A rooted galaxy s3 with CWM
3)CM 11 rom file, and GApps for CM 11
Steps:
1)To root and install CWM, go to youtube and search "how to install cwm on galaxy s3" a video by MrW0lf should come up(Im new in XDA so i cant post links, sorry)
2)Get CM 11 and Gapps (Google it, once again i cant post links sorry)
3)Put both files into internel/external SD card
4)Boot into cwm (power off, then press volume down, power and home key at the same time, once you see samsung galaxy s3 logo, let go)
5)Optional: Do a backup in cwm.(go under backup and restore and click backup)
6)wipe data factory reset, wipe cache and wipe dalvik cache(wipe dalvik cache button is under advance)
7)choose install zip from SD card and go to where ever you put the files
8)Flash CM11 first then the Gapps
Hope this helps:good:
You should not get any problems, but if you do, just reply, i will do my best to help

http://forum.xda-developers.com/galaxy-s3/development-i9305/rom-cyanogenmod-11-0-official-t2524516
You can find everything you need to know in that topic. You shouldn't flash a 4.4 rom just for the sake of running 4.4 though. 4.3 stock with AGNi or Boeffla kernel is fine.

G33k_ said:
Thing you need:
1)An unlocked galaxy s3 (The I9305 version comes unlocked so dont worry)
2)A rooted galaxy s3 with CWM
3)CM 11 rom file, and GApps for CM 11
Steps:
1)To root and install CWM, go to youtube and search "how to install cwm on galaxy s3" a video by MrW0lf should come up(Im new in XDA so i cant post links, sorry)
2)Get CM 11 and Gapps (Google it, once again i cant post links sorry)
3)Put both files into internel/external SD card
4)Boot into cwm (power off, then press volume down, power and home key at the same time, once you see samsung galaxy s3 logo, let go)
5)Optional: Do a backup in cwm.(go under backup and restore and click backup)
6)wipe data factory reset, wipe cache and wipe dalvik cache(wipe dalvik cache button is under advance)
7)choose install zip from SD card and go to where ever you put the files
8)Flash CM11 first then the Gapps
Hope this helps:good:
You should not get any problems, but if you do, just reply, i will do my best to help
Click to expand...
Click to collapse
Thanks but this is where it get's confusing do I have to download a specific version of GApps for the version of CM I'm on etc.. This is why I need links to help me out, I just don't want to do anything wrong just in case my phone get's bricked or something that's even worse..
ArkThompson said:
http://forum.xda-developers.com/galaxy-s3/development-i9305/rom-cyanogenmod-11-0-official-t2524516
You can find everything you need to know in that topic. You shouldn't flash a 4.4 rom just for the sake of running 4.4 though. 4.3 stock with AGNi or Boeffla kernel is fine.
Click to expand...
Click to collapse
Vodafone customers in Australia have been waiting for at least 8+ months now for 4.4, I just want it for it's extra features. And yeh I've searched that thread but it doesn't really tell you step by step on how to do it..
Basically just want to be able to use 4.4 without different kernals etc..? Just CM 11 if that's possible.

Emre1994 said:
Thanks but this is where it get's confusing do I have to download a specific version of GApps for the version of CM I'm on etc.. This is why I need links to help me out, I just don't want to do anything wrong just in case my phone get's bricked or something that's even worse..
Vodafone customers in Australia have been waiting for at least 8+ months now for 4.4, I just want it for it's extra features. And yeh I've searched that thread but it doesn't really tell you step by step on how to do it..
Basically just want to be able to use 4.4 without different kernals etc..? Just CM 11 if that's possible.
Click to expand...
Click to collapse
Australia isn't the only country that has been waiting, 4.4 for the i9305 isn't out anywhere yet. Just download the things in that topic I linked and make sure the rom zip says i9305 and you should be fine. You have already rooted your phone and put on a custom recovery right?

ArkThompson said:
Australia isn't the only country that has been waiting, 4.4 for the i9305 isn't out anywhere yet. Just download the things in that topic I linked and make sure the rom zip says i9305 and you should be fine. You have already rooted your phone and put on a custom recovery right?
Click to expand...
Click to collapse
I thought there were a couple countries that had it on the i9305? And nah mate my phones still fresh I haven't done anything to it yet.
Thanks for the help btw guys.

Emre1994 said:
I thought there were a couple countries that had it on the i9305? And nah mate my phones still fresh I haven't done anything to it yet.
Thanks for the help btw guys.
Click to expand...
Click to collapse
No, if there were then you could just flash an official 4.4 rom onto your phone. Before you can install CM you need to put a custom recovery on your phone. You can do this either by flashing one using Odin / Heimdall or by rooting your phone and then installing rom manager from the play store and having that install CWM for you. I used the latter method on my phone, it's up to you which one you choose though.
I'll explain the latter method since it's the one I used, you have to understand that doing this can break your phone if you don't follow the steps perfectly though. This guide explains how to root your phone http://www.ibtimes.co.uk/galaxys3-lte-gti9305-root-android43-jellybean-xxeumkc-530002 . After step 11 you have to download this http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip , unzip it, go to the folder called "common", drag the superuser.apk file onto your phone or ext sd card and install it using "my files" (default samsung file browser). After that, run supersu, let it disable knox and then go to the play store, download rom manager, click install clockworkmod and choose the i9305 one.

ArkThompson said:
Australia isn't the only country that has been waiting, 4.4 for the i9305 isn't out anywhere yet. Just download the things in that topic I linked and make sure the rom zip says i9305 and you should be fine. You have already rooted your phone and put on a custom recovery right?
Click to expand...
Click to collapse
Sprint already has 4.4.2 for the galaxy s3 -_-

G33k_ said:
Sprint already has 4.4.2 for the galaxy s3 -_-
Click to expand...
Click to collapse
American GS3s aren't i930Xs, they are only dual core as well.

Emre1994 said:
Thanks but this is where it get's confusing do I have to download a specific version of GApps for the version of CM I'm on etc.. This is why I need links to help me out, I just don't want to do anything wrong just in case my phone get's bricked or something that's even worse..
Click to expand...
Click to collapse
you wont brick your device if you install the wrong GApps. If you google "GApps" a link to cyanogenmod wiki would come up, it has to links for the GApps for CM 11

G33k_ said:
you wont brick your device if you install the wrong GApps. If you google "GApps" a link to cyanogenmod wiki would come up, it has to links for the GApps for CM 11
Click to expand...
Click to collapse
So root, CWM and CM and GApps I should be alright? Would I still be on the 4.3 firmware and then I'll just have to update to 4.4 through the menu? Not sure how that part works.. But I'm starting to understand it a tiny bit.
Sucks how the auto installer works for the S3 but not for the S3 LTE..

Emre1994 said:
So root, CWM and CM and GApps I should be alright? Would I still be on the 4.3 firmware and then I'll just have to update to 4.4 through the menu? Not sure how that part works.. But I'm starting to understand it a tiny bit.
Sucks how the auto installer works for the S3 but not for the S3 LTE..
Click to expand...
Click to collapse
1. Root your phone
2. Install CWM using Rom Manager
3. Put CM and Google Apps on your sd or ext sd (the .zips, don't unzip them)
4. Follow the instructions in the first post http://forum.xda-developers.com/galaxy-s3/development-i9305/rom-cyanogenmod-11-0-official-t2524516
To boot into recovery press power + volume up + home. To flash things you have to navigate using the volume buttons to "install zip", press power and then either choose zip from sdcard (internal) or sdcard1 (external) depending on where you put the .zip files. To wipe things just go back to the main page and there is an option that says wipe data / factory reset. I highly recommend that you make a backup of your phone using CWM on your external SD and backup the efs using the guides in this post http://forum.xda-developers.com/gal...warning-guide-backup-restore-imei-nv-t1946915 before flashing CM.
After flashing CM your phone will automatically be on 4.4.

ArkThompson said:
1. Root your phone
2. Install CWM using Rom Manager
3. Put CM and Google Apps on your sd or ext sd (the .zips, don't unzip them)
4. Follow the instructions in the first post http://forum.xda-developers.com/galaxy-s3/development-i9305/rom-cyanogenmod-11-0-official-t2524516
To boot into recovery press power + volume up + home. To flash things you have to navigate using the volume buttons to "install zip", press power and then either choose zip from sdcard (internal) or sdcard1 (external) depending on where you put the .zip files. To wipe things just go back to the main page and there is an option that says wipe data / factory reset. I highly recommend that you make a backup of your phone using CWM on your external SD and backup the efs using the guides in this post http://forum.xda-developers.com/gal...warning-guide-backup-restore-imei-nv-t1946915 before flashing CM.
After flashing CM your phone will automatically be on 4.4.
Click to expand...
Click to collapse
Too easy mate, would you recommend nightly or a stable version of CM? And also once everythings done can I remove the CM, GApps, CWM files from my sd card? Or do they have to stay in there, because I'm thinking they would.. Cheers.

Emre1994 said:
Too easy mate, would you recommend nightly or a stable version of CM? And also once everythings done can I remove the CM, GApps, CWM files from my sd card? Or do they have to stay in there, because I'm thinking they would.. Cheers.
Click to expand...
Click to collapse
The stable version is really old so just read through the last pages of that topic I linked and see what people say is a good nightly. You can remove everything except the CWM backup. Although, it is good to leave at least one custom rom on your sd card in case your phone soft bricks while you are out somewhere. Remember to back up your contacts and text messages before wiping your data as well, SMS Backup and Restore is good for the texts and you can just copy your contacts to your sim card. Also, if there are any apps you don't want to lose then make sure to back them up before wiping your data.

Emre1994 said:
So root, CWM and CM and GApps I should be alright? Would I still be on the 4.3 firmware and then I'll just have to update to 4.4 through the menu? Not sure how that part works.. But I'm starting to understand it a tiny bit.
Sucks how the auto installer works for the S3 but not for the S3 LTE..
Click to expand...
Click to collapse
yeah, you have to flash CM and GApps through CWM