What kind of files use to downgrade mobile firmware version ? - Galaxy S I9000 Q&A, Help & Troubleshooting

Hello, I have Samsung i9000 and at the moment I have 2.3.6 version firmware,
Baseband version - I9000XDJV1
Kernel version - 2.6.35.7-I9000XWJW5-CL1045879
Build number - GINNGERBREAD.XWJW5
I would like downgrade to 2.3.5, so could you tell me please where can I find files to downgrade 2.3.5 ? You know it's lots of 2.3.5 version but I am worried which one would be suitable for my phone.
Thanks indeed,
Ed

You have to use Odin and this file http://www.mediafire.com/?edl0ud20oxae25x this url drive you to a stock 2.3.5 rom who is probably compatible with your country.

I think you need to download the *JVS firmware, that corresponds at 2.3.5 firmware.
(add www) multiupload.nl/UQR3XQKJ22 <== Here there is an italian version of firmware, but i think that still work for latvia.
Istructions: (for odin)
0: Click on repartition
1: insert pit512 on pit
2: insert on pda CODE_I9000XXJVS_CL565837_REV03_user_low_ship
3: insert on phone MODEM_I9000XXJVS_REV_00_CL1059471
4: insert on csc GT-I9000-CSC-MULTI-OXAJVS
5: Reboot your galaxy S in download mode – Press at the same time:: Down Volume, Home + and power.
6: Open Odin and wait 30 sec, a yellow botton appear (COM:XX)
8: Click on start and wait the finish of the operation.
9: Enjoy your firmware!
You can read a guide for this forum.hdblog.it/f140/%5Bfirmware%5D-samsung-galaxy-s-i9000-xxjvs-2-3-5-disponibile-45547/
this guide should work, but wait, i search the right firmware for latvia.

jumpin666 said:
I think you need to download the *JVS firmware, that corresponds at 2.3.5 firmware.
(add www) multiupload.nl/UQR3XQKJ22 <== Here there is an italian version of firmware, but i think that still work for latvia.
Istructions: (for odin)
0: Click on repartition
1: insert pit512 on pit
2: insert on pda CODE_I9000XXJVS_CL565837_REV03_user_low_ship
3: insert on phone MODEM_I9000XXJVS_REV_00_CL1059471
4: insert on csc GT-I9000-CSC-MULTI-OXAJVS
5: Reboot your galaxy S in download mode – Press at the same time:: Down Volume, Home + and power.
6: Open Odin and wait 30 sec, a yellow botton appear (COM:XX)
8: Click on start and wait the finish of the operation.
9: Enjoy your firmware!
You can read a guide for this forum.hdblog.it/f140/%5Bfirmware%5D-samsung-galaxy-s-i9000-xxjvs-2-3-5-disponibile-45547/
this guide should work, but wait, i search the right firmware for latvia.
Click to expand...
Click to collapse
sorry, but your first link doesn't work...

eddyys said:
sorry, but your first link doesn't work...
Click to expand...
Click to collapse
Download the firmware you need from here http://forum.xda-developers.com/showthread.php?t=1102881

Hey
This site has all original firmwares for all Samsung phones..
www.sammobile.com
Sign up,goto firmware download the firmware,flash guide,flash programs..
Its simply and easy..check..
Cheera
Sent from my GT-I9000 using xda app-developers app

can someone tell me please, which version do I need download from http://forum.xda-developers.com/showthread.php?t=1102881 if I want downgrade to 2.3.5 ? I am scared to confuse.

eddyys said:
can someone tell me please, which version do I need download from http://forum.xda-developers.com/showthread.php?t=1102881 if I want downgrade to 2.3.5 ? I am scared to confuse.
Click to expand...
Click to collapse
There is only 2.3.5 for Europe, so just use the first one, as you seem to be on currently also using the European baseband

xsenman said:
There is only 2.3.5 for Europe, so just use the first one, as you seem to be on currently also using the European baseband
Click to expand...
Click to collapse
thanks! I have downloaded this odin version - Odin v1.82 which 'pit' file do I need use for downgrading ?
s1_odin_20100512
s1_odin_20100513
s1_odin_20100803
also I have windows 7 and when my phone is in 'download mode' it won't show up on Odin.. it's saying windows can't find driver etc. what i have to do ?

Use s1_odin_20100512.pit
the drivers you need come with Samsung Kies, either download that or get just the driver from here: http://forum.xda-developers.com/showthread.php?t=961956

thanks indeed, it works, everything works now, thank you all

Related

[Q] flashing latest european stock rom on non rooted device ?

hy guys,
is there any way to flash the latest official stock rom (XLA3 if i'm right),without having to root my SGN ?
thanks for your help,
Xinity
Hi xinity,
Just download the XLA3 stock rom and follow this thread http://forum.xda-developers.com/showthread.php?t=1386356 but read very carefully!
Unzip XLA3 and you will find odin in there for option 1 you dont need check fus if you already have the rom just go to step 5...But remember to read carefully
Or you use option 2 if you have all the files u need
Sorry for my english,
Kind Regards Funky
xinity said:
hy guys,
is there any way to flash the latest official stock rom (XLA3 if i'm right),without having to root my SGN ?
thanks for your help,
Xinity
Click to expand...
Click to collapse
Just download said ROM, extract it.
open odin (U will get in download package)
Dont check 're-partition'
select PDA in odin with CODE * file
Modem - Modem *
CSC - Multi CSC *
put mobile in Download mode, attach to PC, once you will see yellow table on COM, set START
it will be flashed in 5-10 min.
Remember, LA3 is wipe version, you will lose all your setting n installed application
It is non rootable, you can't Root it directly.
Thanks man!
Thanks guys
I'll take a closer look at home.
Sent from my GT-N7000 using xda premium
dr.ketan said:
Just download said ROM, extract it.
open odin (U will get in download package)
Dont check 're-partition'
select PDA in odin with CODE * file
Modem - Modem *
CSC - Multi CSC *
put mobile in Download mode, attach to PC, once you will see yellow table on COM, set START
it will be flashed in 5-10 min.
Remember, LA3 is wipe version, you will lose all your setting n installed application
It is non rootable, you can't Root it directly.
Click to expand...
Click to collapse
what if i want to root my SGN later ?
will i be able to do that using another method ?
Xinity
xinity said:
what if i want to root my SGN later ?
will i be able to do that using another method ?
Xinity
Click to expand...
Click to collapse
You can't root la1/la3 directly. You have to root first older rootable rom, root it n use mobile odin or cwm to update la1/la3.
Read post #2 n 3 of this thread for more details
http://forum.xda-developers.com/showthread.php?t=1424997

pls help, phone stuck in initial screen

i was installing cwm and now when i switch on the phone, i'm stuck on the initial black/white screen with samsung s advance i9070 showing. i can go into download mode but not recovery.
In Download Mode you must have only ... Download Mode.
Flash again stock jelly Bean with Odin, if you can enter in DM.
R_a_z_v_a_n said:
In Download Mode you must have only ... Download Mode.
Flash again stock jelly Bean with Odin, if you can enter in DM.
Click to expand...
Click to collapse
is this what you mean... http://forum.xda-developers.com/showthread.php?t=2198341
A) JELLYBEANIZATION:
Download Odin3 from here. http://forum.xda-developers.com/atta...1&d=1341114315. Extract it into a folder.
Download Stock JB firmware from here. http://hotfile.com/dl/222710569/1f2e...86223.zip.html . Extract it into a separate folder, you will get a .tar.md5 file.
Make sure you have Kies installed, but not running.
Turn your phone off, and boot into Download mode, this can be done by holding the Vol.Down+Home+Power buttons together at the same time, till it boots.
Press Volume up to continue. Plug in your phone (make sure it's at least 60% charged) . Wait till Odin recognizes (It should say something like COMORT... to the left).
Click on PDA and choose the firmware (.tar.md5) that you extracted in step 2. Click start.
Right now, a virus which will fry your phone's internals is being installed... Calm down, joke.
When your phone boots into JB, and Odin says "PASS". Unplug.
gvmsia said:
is this what you mean... http://forum.xda-developers.com/showthread.php?t=2198341
...
Click to expand...
Click to collapse
Yes.
R_a_z_v_a_n said:
Yes.
Click to expand...
Click to collapse
thanks. the 1st link to odin works but the 2nd link to stock JB firmware doesnt. http://hotfile.com/dl/222710569/1f2e...86223.zip.html
is there anywhere else i can get it?
gvmsia said:
is there anywhere else i can get it?
Click to expand...
Click to collapse
Search on sammobile or samsung updates
Here http://www.sammobile.com/firmwares/ or here http://samsung-updates.com/
R_a_z_v_a_n said:
Search on sammobile or samsung updates
Here http://www.sammobile.com/firmwares/ or here http://samsung-updates.com/
Click to expand...
Click to collapse
thanks. my country (malaysia) is not listed in either one. http://samsung-updates.com/device/?id=GT-I9070 which version can i use?
can i use the one on this page? http://honai-android.blogspot.com/2013/05/how-to-update-galaxy-s-advance-i9070.html
gvmsia said:
thanks. my country (malaysia) is not listed in either one. http://samsung-updates.com/device/?id=GT-I9070 which version can i use?
can i use the one on this page? http://honai-android.blogspot.com/2013/05/how-to-update-galaxy-s-advance-i9070.html
Click to expand...
Click to collapse
we hav the firmwares on devhost. find it here
http://forum.xda-developers.com/showthread.php?t=2110245
it's alive!! THANKS!!!:good::highfive:

[Stock Rom] [Odin] [Firmware Packages] Odin Flashable Firmware Packages S6102 & B5510

Stock Rom Odin Flashable Firmware
For Galaxy Y S6102 And B5510​
What do all the codes mean? Which One Do I Need?
See Here
How To Use Odin
Install samsung usb drivers here
Turn phone off (or pull battery and put back in)
Put your phone into download mode - hold vol down home button then with them held also hold power button
Connect usb cable from phone to pc (use rear usb ports not front ones if you have front usb)
Push vol up to start connection
Open odin 3.07 which you can find by the power of google (other versions may work but thats the one I use)
If odin is connected it will say com then a number is a coloured box under com:id on the left hand side
Only auto reboot and F.reset time shoud be ticked - DO NOT tick anything else!
Put pda in pda
Put modem in phone
Put csc in csc
Start the flashing process
Phone will automatically restart and boot once done
Note if it bootloops just go into recovery and wipe data/reset and restart
If the firmware you want is not listed below try looking on Sammobile
Once you have downloaded the firmware from Sammobile you can use SplitFus2 by Doky in order to split the firmware into pda modem and csc in order to flash via odin - my guide to which can be found Here
Galaxy Y Duos S6102 Firmware
India
S6102_DDMF4_ODDMF4_DDMF4_wipe_by_SplitFUS2
Indonesia, Malaysia, Philippines, Singapore, Vietnam
S6102_DXMD1_OLBMD1_DXMD1_wipe_by_SplitFUS2
Arabic
S6102_JPMA3_OJPMA3_XXMA2_wipe_by_SplitFUS2
European
S6102_XXMC1_XENLC1_XXMA2_wipe_by_SplitFUS2
Click to expand...
Click to collapse
Galaxy Y Pro B5510
Indonesia, Malaysia, Philippines, Singapore, Vietnam
B5510_DXLF1_OLBLF1_DXLE1_wipe_by_SplitFUS2
Arabic
B5510_JPLI1_OJPLF1_XXLH3_wipe_by_SplitFUS2
European
B5510_XXLK3_OXALK3_XXLK1_wipe_by_SplitFUS2
Click to expand...
Click to collapse
Credits
Doky for splitfus2
XDA:DevDB Information
Odin Flashable Stock Rom Firmware For S6102 & B5510, ROM for the Samsung Galaxy Y GT-S5360
Contributors
marcussmith2626
ROM OS Version: 2.3.x Gingerbread
ROM Firmware Required: Stock Gingerbread 2.3.6 Firmware
Based On: Stock Firmware
Version Information
Status: Stable
Created 2014-10-31
Last Updated 2014-10-31
Marcus these firmwares are already splitted right? and dude there is no firmware for Pakistan please update the splitted one
skakazim said:
Marcus these firmwares are already splitted right? and dude there is no firmware for Pakistan please update the splitted one
Click to expand...
Click to collapse
yes they are already split
Pakistan firmware is the Arabic firmware - I have just listed regions not every single country
marcussmith2626 said:
yes they are already split
Pakistan firmware is the Arabic firmware - I have just listed regions not every single country
Click to expand...
Click to collapse
ok thanks
---------- Post added at 12:16 PM ---------- Previous post was at 12:02 PM ----------
marcussmith2626 said:
Stock Rom Odin Flashable Firmware
For Galaxy Y S6102 And B5510​
What do all the codes mean? Which One Do I Need?
See Here
How To Use Odin
Install samsung usb drivers here
Turn phone off (or pull battery and put back in)
Put your phone into download mode - hold vol down home button then with them held also hold power button
Connect usb cable from phone to pc (use rear usb ports not front ones if you have front usb)
Push vol up to start connection (if drivers are installed it should say android adb in device manager)
Open odin 3.07 which you can find by the power of google (other versions may work but thats the one I use)
If odin is connected it will say com then a number is a coloured box under com:id on the left hand side
Only auto reboot and F.reset time shoud be ticked - DO NOT tick anything else!
Put pda in pda
Put modem in phone
Put csc in csc
Start the flashing process
Phone will automatically restart and boot once done
If the firmware you want is not listed above try looking on Sammobile
Once you have downloaded the firmware from Sammobile you can use SplitFus2 by Doky in order to split the firmware into pda modem and csc in order to flash via odin - my guide to which can be found Here
Galaxy Y Duos S6102 Firmware
Galaxy Y Pro B5510
Credits
Doky for splitfus2
Click to expand...
Click to collapse
Mod Edit quote hidden
Dude I followed each and every instruction you gave and I guess the flashing was successful but now it is back on the old same boot loop problem.What should I do? Flash again with the same steps?
skakazim said:
ok thanks
---------- Post added at 12:16 PM ---------- Previous post was at 12:02 PM ----------
Dude I followed each and every instruction you gave and I guess the flashing was successful but now it is back on the old same boot loop problem.What should I do? Flash again with the same steps?
Click to expand...
Click to collapse
go into recovery and wipe/data and restart
else use a different firmware
also dont quote the entire first post no need for it and also please only post in one thread - saves me answering in multiple threads
edit - quote of 1st post hidden
Ok sorry
Sent from my GT-S6102 using XDA Free mobile app
Thank You Marcus for the splitted Stock Firmwares for sgyd!
Sent from my GT-S6102 using XDA Free mobile app
XXMA2
HI
by the way ... thank you for this freaking useful thread
i have a lil problem : (old ss from an sd backup)
so i live in morocco but i don't really know what version of XXMA2 was in my phone can u help me
SDR_Muslim_Mo said:
HI
by the way ... thank you for this freaking useful thread
i have a lil problem : (old ss from an sd backup)
so i live in morocco but i don't really know what version of XXMA2 was in my phone can u help me
Click to expand...
Click to collapse
XX firmware is European so flash European firmware
I have flashed European firmware for gt-s6102 and I have bootloop. There has been some note about problem with mounting data.
Any ideas what went wrong ?
jurasjo said:
I have flashed European firmware for gt-s6102 and I have bootloop. There has been some note about problem with mounting data.
Any ideas what went wrong ?
Click to expand...
Click to collapse
have you gone into recovery and wipe data/reset as per instructions on the first post?
if so you will probably need to also include the pit file if you have done wrong flashing in the past for your phone - you can search for the pit file for your phone and include that in the flashing process
Bootloader
no bootloader file required while flashing via odin ?
AsherFreakz said:
no bootloader file required while flashing via odin ?
Click to expand...
Click to collapse
No - I never include it as it's not needed & if you flash the wrong one you would potentially brick your phone & would require a jtag
All you need for general flashing a new stock rom is pda modem & phone & follow my instructions
Thanks
marcussmith2626 said:
Stock Rom Odin Flashable Firmware For Galaxy Y S6102 ........1​
Click to expand...
Click to collapse
Thanks a lot to bring my dead phone to alive....:good:​
im having "e:cant mount /data" problem....plz help
d33pak_007 said:
im having "e:cant mount /data" problem....plz help
Click to expand...
Click to collapse
You flash this in download mode as per instructions
It will format data so you shouldn't get any errors like that after fishing however you can always manually format data yourself in recovery mode as explained again in the instructions
marcussmith2626 said:
You flash this in download mode as per instructions
It will format data so you shouldn't get any errors like that after fishing however you can always manually format data yourself in recovery mode as explained again in the instructions
Click to expand...
Click to collapse
I know how to get into recovery mode...but download mode..?? can u explain how to get into download mode
d33pak_007 said:
I know how to get into recovery mode...but download mode..?? can u explain how to get into download mode
Click to expand...
Click to collapse
This is the kind of post that really annoys me for 2 reasons
1 - you clearly still haven't read the instructions on the first post as it clearly tells you how to get into download mode and gives step by step instructions on how to do everything
2 - even if by some chance after reading the first post which gives you the answer anyway you could of just typed in Google "How to put galaxy y in download mode"
Sorry to make an example of you but people really do need to follow my instructions and actually read the first post fully!
marcussmith2626 said:
This is the kind of post that really annoys me for 2 reasons
1 - you clearly still haven't read the instructions on the first post as it clearly tells you how to get into download mode and gives step by step instructions on how to do everything
2 - even if by some chance after reading the first post which gives you the answer anyway you could of just typed in Google "How to put galaxy y in download mode"
Sorry to make an example of you but people really do need to follow my instructions and actually read the first post fully!
Click to expand...
Click to collapse
sorry....and i googled it,but needed some experience advice...
d33pak_007 said:
sorry....and i googled it,but needed some experience advice...
Click to expand...
Click to collapse
Successfully unbricked...!!! thanx a lot

Samsung s3 mini blocked afrter failed root

Hi, after a failed rooting my s3 blocked, i tryed to put on the I9300XXALE8_I9300ITVALE7_ITV (i'm from italy), but now is blocked on the Samsung logo. Also when i go in download mode it says
Odin mode
Product name : GT-I8190
Custom binary donwload : YES (17 counts) (ye i tryed 17 times to fix it)
Current binary : custom
System status : Official
So i have some questions : Can i send it to assistance and they can repair it (with warranty)? , should i try to re download the I9300XXALE8_I9300ITVALE7_ITV file? ( i tryed with 3 versions of odin, with 2 of them it says : failed, with the newest it says : pass but it blocks on Samsung logo)
Or there is something other that i can do?
(sry bad english)
Are you flashing a i9300 firmware to a i8190?
No wonder why it doesn't work.
tys0n said:
Are you flashing a i9300 firmware to a i8190?
No wonder why it doesn't work.
Click to expand...
Click to collapse
+1 Just find the ROM you want to install here http://live.samsung-updates.com/index.php?device=GT-I8190 then download and flash this http://download.chainfire.eu/448/SuperSU/UPDATE-SuperSU-v1.99r5.zip and finally go and install this https://play.google.com/store/apps/details?id=eu.chainfire.supersu (or update if you have it installed after you flash the file above). I can root any phone with this simple method
NOTE : It doesn't matter which country you're from, you can flash any firmware you like, so why not be it the latest one available for your device (ANF3 at the moment)? You can still change language to Italian after flashing so there's really no difference between regions
WildDorian27 said:
Hi, after a failed rooting my s3 blocked, i tryed to put on the I9300XXALE8_I9300ITVALE7_ITV (i'm from italy), but now is blocked on the Samsung logo. Also when i go in download mode it says
Odin mode
Product name : GT-I8190
Custom binary donwload : YES (17 counts) (ye i tryed 17 times to fix it)
Current binary : custom
System status : Official
So i have some questions : Can i send it to assistance and they can repair it (with warranty)? , should i try to re download the I9300XXALE8_I9300ITVALE7_ITV file? ( i tryed with 3 versions of odin, with 2 of them it says : failed, with the newest it says : pass but it blocks on Samsung logo)
Or there is something other that i can do?
(sry bad english)
Click to expand...
Click to collapse
you tried i9300 firmware that is wrong, you should i8190 format
koragg97 said:
+1 Just find the ROM you want to install then download and flash this UPDATE-SuperSU-v1.99r5.zip and finally go and install this eu.chainfire.supersu (or update if you have it installed after you flash the file above). I can root any phone with this simple method
NOTE : It doesn't matter which country you're from, you can flash any firmware you like, so why not be it the latest one available for your device (ANF3 at the moment)? You can still change language to Italian after flashing so there's really no difference between regions
Click to expand...
Click to collapse
I've never rooted a phone so I was just wondering how to do it like this? I've read some guides but it's really unclear still, one that I tried simply didn't work (the one where you flash CWR with Odin as the first step). Can you/someone tell me how to do this exactly, please? This is what I'm thinking atm:
1) If I already have the latest version I'm happy with, do I still need to download that version again or can I just go ahead with the SuperSU flashing part?
2) How do I in practice flash the SuperSU zip file? I currently have Odin v.3.0.7 and Minimal ADB and Fastboot installed on my PC. Thanks for any help!
Nanhia said:
I've never rooted a phone so I was just wondering how to do it like this? I've read some guides but it's really unclear still, one that I tried simply didn't work (the one where you flash CWR with Odin as the first step). Can you/someone tell me how to do this exactly, please? This is what I'm thinking atm:
1) If I already have the latest version I'm happy with, do I still need to download that version again or can I just go ahead with the SuperSU flashing part?
2) How do I in practice flash the SuperSU zip file? I currently have Odin v.3.0.7 and Minimal ADB and Fastboot installed on my PC. Thanks for any help!
Click to expand...
Click to collapse
If you don't have the latest firmware on your phone, download it from the link I gave (it's a .md5 file). Now go to Developer Options in your phone's settings and tick USB Debugging. Power off your phone. After that enter download mode on your phone by pressing power+volume down+home button while turning it on. You'll see a big message on your screen saying "Downloading, don't unplug target". Now plug your s3 mini into the pc and start Odin. Select PDA and find the .md5 file from before. Make sure that f.reset time and re-partition are unchecked and then press start. Once it's done odin will say "pass" and your phone will reboot. Congrats, you now have the latest firmware on your s3 mini
Now in order to root it, you need a custom recovery so let's go
On Google search "TWRP 2.7.1.1 Android-Andi xda" and download it from the attachments of his post (it's a .md5 file again). Again turn off the phone and enter Download Mode like before. Now do the same steps with Odin as the first time (with the firmware), but this time select the TWRP.md5 file instead of the firmware one in PDA section of Odin. Make sure all the options on the left are ticked/unticked exactly like the first time and hit Start. The "Pass" message should be displayed and the phone should reboot.
Congrats, you now have the latest TWRP Recovery on your s3 mini
And the last step - rooting it
Download the SuperSU.zip from the link in my post and copy it to your device's memory (internal or external). Now in order to enter Recovery Mode you need to turn off your phone and turn it back on by holding the power+volume up+home buttons until you see a "TeamWin" message on your screen. This recovery is touch based so just select install, choose the SuperSU.zip file and flash it. Reboot the phone.
Now you're rooted and on the latest firmware arty:
For future updates do the same. Just change the firmware .md5 file with the latest one available. The rest is the same xD
Man, I got tired ...
Sent from my " Black Beauty " using XDA Premium 4 mobile app
koragg97 said:
For future updates do the same. Just change the firmware .md5 file with the latest one available. The rest is the same xD
Man, I got tired ...
Click to expand...
Click to collapse
Thankd! Bookmarking for sure for future reference!
Nanhia said:
Thankd! Bookmarking for sure for future reference!
Click to expand...
Click to collapse
:thumbup:
Sent from my " Black Beauty " using XDA Premium 4 mobile app

i9506 Lolipop Official Samsung firmware 5.0.1

Hey guys! Samsung finally released Lollipop for international i9506!
It's available for few country sale codes:
Latest
GT-I9506 NEE Nordic I9506XXUDOD3 I9506NEEDOD4
Click to expand...
Click to collapse
Change list: 4723452 BUILD DATE: 17.04.2015
Download link
https://mega.co.nz/#!5Y8hlL6Y!Tr-DOZftNhrbJ2op0fhNBaE7C-pdXMRZo6xjGud866g
http://uploaded.net/file/o2j56wxd
http://rapidgator.net/file/dfd236558d8d456af12b749548781f98
Change list: 4260938 Build date 27.02.2015
GT-I9506 Greece I9506XXUDOB5 I9506EURDOB1
Click to expand...
Click to collapse
Download link
https://mega.co.nz/#!wd9V1ZQS!764e_J-sd6GrZ7sbSb-YLt_epH384zR9M6XJeMgFX5A
http://rapidgator.net/file/e53c2bfa66c94f6fed3a507c42ca4e3d
http://uploaded.net/file/wwrzlcba
https://www.wetransfer.com/download...758651c53716cfa5f8e4b77820150311203037/e400ae
GT-I9506 Czech I9506XXUDOB5 I9506OXXDOB1
Click to expand...
Click to collapse
https://mega.co.nz/#!RQ1H2KxQ!KeC8jK_Jc1VNNYkQtty2d3QWwFStUsADWDLjSbnDT7I
https://www.wetransfer.com/download...be278087d4f3161b98f9888420150312184703/e7a0c2
Change list: 4060099 Build date 30.01.2015
GT-I9506 Greece5.0.1 I9506XXUDOAAI9506EURDOB1
Click to expand...
Click to collapse
Download link
http://rapidgator.net/file/68fbf7b2fdca69bbed5f0326c3a641e1
http://uploaded.net/file/i5s8waad
https://mega.co.nz/#!RQtWCD5S!Neak_LiOMRtWgwGnm7i1vJU45YctaesRxd-ElUEemtw
Change list: 3875041 Build date 13.01.2015
GT-I9506Germany (Vodafone)5.0.1I9506XXUDOA6 I9506VFGDOA4
GT-I9506Czech Republic (Vodafone)5.0.1I9506XXUDOA6 I9506VFGDOA4
GT-I9506Czech Republic5.0.1I9506XXUDOA6 I9506OXXDOA1
GT-I9506Slovakia5.0.1I9506XXUDOA6 I9506OXXDOA1
GT-I9506Sweden (tre) 5.0.1I9506XXUDOA6I9506HTSDOA1
GT-I9506Nordic open5.0.1I9506XXUDOA6 I9506NEEDOA6
GT-9506 Austria (A1)5.0.1I9506XXUDOA6I9506VFGDOA4
Click to expand...
Click to collapse
Download links
http://live.samsung-updates.com/index.php?device=GT-I9506
http://www.sammobile.com/firmwares/database/GT-I9506/
For Slovakia only (ORX CSC)
https://mega.co.nz/#!5sEDBbxB!G7QAqzdstUxQxmbvF2VpOPoJtKUydH1L_I5SMXBdphk
infos:
http://www.sammobile.com/2015/02/06/android-5-0-lollipop-rolls-out-to-the-samsung-galaxy-s4-lte-a-gt-i9506/
Same thread in general section http://forum.xda-developers.com/galaxy-s4/general/official-lollipop-5-0-1-rolling-t3023312
Yeah, wrong section and I've misted it
Added Mega mirror link for Slovakia (csc orx)
After lollipop update, is possible to downgrade to official kitkat?
Taptalked
Very good gestion
Please people read DeHawk's section about upgrading and downgrading bootloaders. It is not so simply...
if kk and lollipop roms have the same bootloader, the downgrade is simple with stock rom with odin.
i need to know if anyone tryed it before i flash lollipop
I have installed the Czech Republic version with odin and everything seems to work fine.
judasjj said:
I have installed the Czech Republic version with odin and everything seems to work fine.
Click to expand...
Click to collapse
Wifi too ?
Sent from my GT-I9506 using XDA Free mobile app
Wifi works to
German have WIFI error
Developer.WL said:
German have WIFI error
Click to expand...
Click to collapse
i also had wifi error at first, flashed the rom 3 more times with odin and than wifi worked. :good:
the trick apparently is..
Just make sure you follow the sammobile instructions carefully, others have just loaded odin and flashed the rom and the modem etc. was left 'untouched'. So make sure you do the proper sequence e.g. download mode (its in the sammobile instructions).
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
These are the steps which i make
Reboot / Boot into download-mode?
Developer.WL said:
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
These are the steps which i make
Click to expand...
Click to collapse
Not too sure about that part! It is actualy recommended that one should turn-off phone and then boot into download-mode rather than "reboot" into download-mode. The experts might give their two-cents on the mutter.
judasjj said:
Wifi works to
Click to expand...
Click to collapse
my wifi doesnt work on the German Firmware ,
how did you get yours to work?
lythro said:
my wifi doesnt work on the German Firmware ,
how did you get yours to work?
Click to expand...
Click to collapse
i have flashed the firmware about 3 times with odin and it worked ^-^
Wifi
breakingstorm said:
i have flashed the firmware about 3 times with odin and it worked ^-^
Click to expand...
Click to collapse
Nice i will wait for the update if there is
There's no wifi bug. You just have to turn off the device (no restart!!!) before going to download mode. Otherwise modem will stay untouched - from previous firmware causing wifi problems.
Wysłane z mojego GT-I9506

Categories

Resources