Database Develop

[Q] Galaxy Ace stuck in reboot loop

My Galaxy Ace is stuck in a reboot loop after trying to flash 2.3.6 onto it, when it had 2.3.5 on it previously.
I've used ODIN and no matter what firmware I try to flash onto it, it just goes into a reboot loop.
Any idea how to fix it?

Did you try to do a wipe?

vkanamekuran said:
Did you try to do a wipe?
Click to expand...
Click to collapse
A wipe worked! Thanks!

how to do a wipe please tell

mor1228 said:
how to do a wipe please tell
Click to expand...
Click to collapse
press down home button and then power on phone ...--> you will enter into recovery mode .
select wipe with help of volume keys and there you go out of bootloop

My Galaxy Ace is also in some sorta reboot loop.
Everything was working fine with it (phone is rooted and CWM installed) until I did a phone reset because I was giving the phone to my gf. After doing this the phone reboots, the blue samsung logo plays (without sound) and then repeats ad-infinitum. I can get into recovery mode and download mode ok and I've tried wipe and even restored a CWM backup (it says it was successful) but the phone just keeps rebooting. I can see the phone in odin but I've never tried to flash anything onto it and quite frankly I'm unsure whether it would just make things worse (if it needs to go back to Samsung for repair). Any help would be appreciated...

If you have cwm ..why dont you download some custom rom like cm7and flash it ..that would bring your phone back to life ...then you can downgrade to stock rom if you want ...and btw in cwm try cache partition , clear data /factory reset and clear dalvik cache ..see if it boots after you do this ..
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script

when i always flash by odin or by cwm i always do wipe , wipe cache and wipe dalvik, this helps me everytime

I managed to flash a firmware from samfirmware and it fixed the reboot.
Now my issue is when I connect to Kies, it says there's an updated firmware for the phone but it fails every attempt to install it. I went back to samfirmware and found this firmware: S5830ZSKPD ## but when I download and extract it there's only 1 x MD5 file and 1 x DLL file?! The other firmware had the 4 or 5 files needed to include in Odin... any ideas guys?

I think its a "one package file " ..I forgot the correct name but there is some option like that in odin ..dont worry it contains all the required files ..and if you are scared to do it then go to you tube ..there are many tutorials showing it then...
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script

rogers4759 said:
I think its a "one package file " ..I forgot the correct name but there is some option like that in odin ..dont worry it contains all the required files ..and if you are scared to do it then go to you tube ..there are many tutorials showing it then...
Click to expand...
Click to collapse
Yep, that's exactly what it was, thanks again.
Unfortunately with this firmware, Kies doesn't recognise it and provides no info.
I flashed back to the older firmware... I'll just have to keep experimenting I guess.

for flashing with odin --> http://forum.xda-developers.com/showthread.php?t=1225493
many people says, don't upgrade the firmware with KIES.

dianpadi said:
for flashing with odin --> http://forum.xda-developers.com/showthread.php?t=1225493
many people says, don't upgrade the firmware with KIES.
Click to expand...
Click to collapse
Well I could flash it with Odin if I had the firmware but I don't.
It appears it's not available on SamFirmware.com
Do you know where I can download the following firmware?
PDA:KPD / PHONE:KPD / CSC:KPC (THL)
Thanks

Lol I cant understand those firmwares ..can you tell me which version of android you want like 2.3.4/2.3.5/2.3.6 ...then ill be able to help you wanr
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script

Thanks anyway but I managed to find the firmware online and flashed it using Odin.
Now Kies says I'm using the latest which is a good start : )
Now I just need to find a way to root my SGS2 GT-I9100T

U can try a custom ROM from the Developer's forums here.
I also once stucked in the Reboot Loop..............
But then I installed a custom or if you want features from a official Rom, you can install Stock Based custom ROm from the Developer forums of Galaxy Ace. Really good Rom have been made by the developers

In the chance that someone else is looking for this latest OEM firmware update:
PDA:KPD / PHONE:KPD / CSC:KPC (THL)
It can be downloaded from: http://translate.googleusercontent....flgljh&usg=ALkJrhiMpHV83dugh4RGwhKpyjIrYIgn2Q
It is in "one part file" format and can be flashed using Odin.

whatever may be the problem ......just rem to keep a backup of ur previously used rom and just flash it with cwm...

Progress?
Sent from my GT-S5830 using xda premium

Read all the previous no way out loop boot
Hi every body
i have installed cwm, custum firmware, every thing goes ok
tryed to use simlock remover, no message, turned off the Galaxy Ace but after rebooting, a continuous loop boot, no acces to recovery, flashing on wath ever firmware version with odin success but on rebooting the loop is back, help please.
PS : while flasing with odin : "big partition size!!"

Problem my phone is stuck on download mode.

I tried rooting with the chainfire auto root thing and after the red android screen i got the green one again and its stuck,i tried taking out the battery a few times but its still not working.
Any help would be amazing.

Well search would help ..
You say you are stuck on download mode .
As in download mode does screen not move unable to boot to recovery unable to power off .
Read the CFauto root instructions in full

JJEgan said:
Well search would help ..
You say you are stuck on download mode .
As in download mode does screen not move unable to boot to recovery unable to power off .
Read the CFauto root instructions in full
Click to expand...
Click to collapse
I did and didnt find anything helpfull for my situation.
Also tried to root again but again its stuck on downloading... do not turn off target screen.

Boot to download mode and it says as it should Downloading do not turn off .
You are now supposed to flash the firmware via odin .
You should flash your stock firmware to get the phone working .
Then read the basic faqs and guides before you flash anything as its pointless flashing without reading the basics .
Or take it to a service centre .
jje

Thanks for the reply ill consider doing that
but before i try that i managed to get into recovery mode does that mean i can try something or should i try the odin flash thing?

grpl said:
Thanks for the reply ill consider doing that
but before i try that i managed to get into recovery mode does that mean i can try something or should i try the odin flash thing?
Click to expand...
Click to collapse
Clear data and cache then reboot you may not have to reflash the rom. if that doesnt work tha use odin to flash stock rom. good luck

grpl said:
thanks for the reply ill consider doing that
but before i try that i managed to get into recovery mode does that mean i can try something or should i try the odin flash thing?
Click to expand...
Click to collapse
read the basics ignorance is no excuse .

ashraf sharif said:
Clear data and cache then reboot you may not have to reflash the rom. if that doesnt work tha use odin to flash stock rom. good luck
Click to expand...
Click to collapse
I did that and yeah i think i need to reflash too since that stuff didnt work.
i think i cant find my stock firmware from what i checked they dont have my country but maybe thats not importent

grpl said:
I did that and yeah i think i need to reflash too since that stuff didnt work.
i think i cant find my stock firmware from what i checked they dont have my country but maybe thats not importent
Click to expand...
Click to collapse
Is there a way to know my version/pda since i have no idea what stock rom to download

Device model no. in recovery mode
Hi,
Sorry to ask a random question. I Have my device model no. as S3 I9305 when I go to download mode and in my phone settings I can see my device model as S3 I9305T. I have recently installed Australian official firmware(XSA version without any career bloatware) in my phone, which is the S3 I9305T. I found it weird to have two different model nos. in 2 different places. When I first bought this phone it was the Telstra version, which is S3 I9305T. After that I changed many firmwares and installed S3 I9305 version from optus and other country's S3 I9305 version as well. Could you please tell me why is that?? Is this because I once installed I9305 firmware once? If that's the reason, today I flashed I9305T official firmware again with Odin. Is there any way to reset the download mode as well?? Please reply. Thanks.

grpl said:
Is there a way to know my version/pda since i have no idea what stock rom to download
Click to expand...
Click to collapse
Not unless you know what it is or saved the original .
You can just pick a stock rom for your area/ network .
If you bothered to read the basics their would be no need for all this ratting about .

@JJEgan I need some help, Ive got device, with same problem (i9305)
the donwload mode (which it defult boots into) does not show any device infos (which normally shows on the upper left corner)
Ive tried flashing latest stock rom (4.3) it gives an error (NOT "error pit file partition" but error flashing. failed it does not go beyond sboot )
any help? I am looking for 3 or 4 part firmware for this model, so that I could flash with pit.

dogmatism said:
@JJEgan I need some help, Ive got device, with same problem (i9305)
the donwload mode (which it defult boots into) does not show any device infos (which normally shows on the upper left corner)
Ive tried flashing latest stock rom (4.3) it gives an error (NOT "error pit file partition" but error flashing. failed it does not go beyond sboot )
any help? I am looking for 3 or 4 part firmware for this model, so that I could flash with pit.
Click to expand...
Click to collapse
So you run odin in windows.
Boot your phone to download mode
Connect device and wait for confirmation of connection in odin.
And then you click pda and choose a stock firmware.
And click start.

@tissot Odin gives fail error as I stated before. Am going to try 3 part odin package ive downloaded,.

Big issue after firmware update try

Hello,
I've a "non commercial" version of a GTab 8.9.
This tab is running by default Android 3.1. I would like to update to Android 4.0.4. Kies doesn't want indicating my tablet doesn't support the update (i don't know it was 4.0.4 version or another)
I tried to use the standard : Odin + the new firmware. The tablet is unlocked and rooted.
Each time that I tried I get the error : "can't nand write" :-/ I tried all current stuff to fix this issue : change cable, PC, odin version (1.83, 1.85, 3.07, 3.09). I tried to change recovery with succss
but impossible to change rom. I found a link on tsar dot com (sorry I'm too young here to post link) to reformat tab and I put the pit file : this has worked....but now : i can't access to the recovery. I can only open the download mode...but I can't do anything and I don't have others files described ont the following link
XDA's guy are ones to save me !!
thanks by advance (sorry for my poor english)

arnouf said:
Hello,
I've a "non commercial" version of a GTab 8.9.
This tab is running by default Android 3.1. I would like to update to Android 4.0.4. Kies doesn't want indicating my tablet doesn't support the update (i don't know it was 4.0.4 version or another)
I tried to use the standard : Odin + the new firmware. The tablet is unlocked and rooted.
Each time that I tried I get the error : "can't nand write" :-/ I tried all current stuff to fix this issue : change cable, PC, odin version (1.83, 1.85, 3.07, 3.09). I tried to change recovery with succss
but impossible to change rom. I found a link on tsar dot com (sorry I'm too young here to post link) to reformat tab and I put the pit file : this has worked....but now : i can't access to the recovery. I can only open the download mode...but I can't do anything and I don't have others files described ont the following link
XDA's guy are ones to save me !!
thanks by advance (sorry for my poor english)
Click to expand...
Click to collapse
I didn't quite understand everything, but I'll provide you every link you need to fix this
and if I forgot something or you need anything, feel free to ask for
now here are links for some absolutely working files:
Samsung USB Driver For GT-P7300/GT-P7310 v1.5.5.0
Odin3 v1.85 For GT-P7300/GT-P7310
Samsung latest official GT-P7300 framework Tar for Odin
Samsung latest official GT-P7310 framework Tar for Odin
Samsung latest official GT-P7320 framework Tar for Odin
ClockworkMod Recovery v5.5.0.4 Odin Tar File For GT-P7300/GT-P7310
Team Win Recovery Project v2630 Odin Tar File For GT-P7300 & GT-P7310
all you have to do is to flash your tab's ROM [chose the link in regard of your tab's model number (p7300,p7310,p7320)]
and then flash your prefered recovery

omarainea said:
I didn't quite understand everything, but I'll provide you every link you need to fix this
and if I forgot something or you need anything, feel free to ask for
now here are links for some absolutely working files:
Samsung USB Driver For GT-P7300/GT-P7310 v1.5.5.0
Odin3 v1.85 For GT-P7300/GT-P7310
Samsung latest official GT-P7300 framework Tar for Odin
Samsung latest official GT-P7310 framework Tar for Odin
Samsung latest official GT-P7320 framework Tar for Odin
ClockworkMod Recovery v5.5.0.4 Odin Tar File For GT-P7300/GT-P7310
Team Win Recovery Project v2630 Odin Tar File For GT-P7300 & GT-P7310
all you have to do is to flash your tab's ROM [chose the link in regard of your tab's model number (p7300,p7310,p7320)]
and then flash your prefered recovery
Click to expand...
Click to collapse
Thanks for your reply. I tried this first but it didn't work because when I want "start" with the good firmware (7300), the md5 check works but that's all. When odin want write boot.img or other file, i get an error "Can't write" and odin stops.
As this method didn't work I try with the tsar dot com solution. Hoping that's can help me.
Thanks a lot.

arnouf said:
Thanks for your reply. I tried this first but it didn't work because when I want "start" with the good firmware (7300), the md5 check works but that's all. When odin want write boot.img or other file, i get an error "Can't write" and odin stops.
As this method didn't work I try with the tsar dot com solution. Hoping that's can help me.
Thanks a lot.
Click to expand...
Click to collapse
ok if this is the same file you tried, you should try to flash another one Previous official framework for P7300

omarainea said:
ok if this is the same file you tried, you should try to flash another one Previous official framework for P7300
Click to expand...
Click to collapse
Ok I'm going to try. But I think it's going to fail.... the reason is the Nand seems block or something like that.
I download file, test and I'll give you a feed back. Thanls for your help.

arnouf said:
Ok I'm going to try. But I think it's going to fail.... the reason is the Nand seems block or something like that.
I download file, test and I'll give you a feed back. Thanls for your help.
Click to expand...
Click to collapse
Or your nand is really broken
I've a similar issue in /data partition (it can't be writtable after a try to flash with Odin from a virtual machine) and I fixed it with the PIT file to repartition, reflash stock firmware and then a wipe/factory reset from stock recovery (I think it did a format)...

I try to put pit file. It's works as I told in my first post. But I can't flash the firmware with a standard stock rom (apparently). Can you tell me tools and roms that you used to fix the issue exaclty ?

arnouf said:
I try to put pit file. It's works as I told in my first post. But I can't flash the firmware with a standard stock rom (apparently). Can you tell me tools and roms that you used to fix the issue exaclty ?
Click to expand...
Click to collapse
I think the same as @omarainea have posted...

jolinnard said:
I think the same as @omarainea have posted...
Click to expand...
Click to collapse
Poor guy I am ! After a pit file download with heimdall...My tab doesn't start, screen is still off, and I don't have information in charge....brick, brick, brick...

arnouf said:
Poor guy I am ! After a pit file download with heimdall...My tab doesn't start, screen is still off, and I don't have information in charge....brick, brick, brick...
Click to expand...
Click to collapse
what did you do to break your device ??

omarainea said:
what did you do to break your device ??
Click to expand...
Click to collapse
I think that I use incorrectly the heimdall sofware when I want to load the pit file. Messages said all was ok, I unplug the USB cable. I would like to reboot the tab and...black screen, impossible to restart....complete black screen

arnouf said:
I think that I use incorrectly the heimdall sofware when I want to load the pit file. Messages said all was ok, I unplug the USB cable. I would like to reboot the tab and...black screen, impossible to restart....complete black screen
Click to expand...
Click to collapse
I'm not familiar with heimdall tool but I know that it should be used with Galaxy S devices:
What is Heimdall?
Heimdall is a cross-platform open-source tool suite used to flash ROMs onto Samsung Galaxy S devices.
Click to expand...
Click to collapse
anyway, so now you can't enter download mode or recovery ??
if that so, then you have officially break your device:silly:
and the most recommended solution is to take your tab to a near Samsung store
and they'll fix it for you

omarainea said:
I'm not familiar with heimdall tool but I know that it should be used with Galaxy S devices:
anyway, so now you can't enter download mode or recovery ??
if that so, then you have officially break your device:silly:
and the most recommended solution is to take your tab to a near Samsung store
and they'll fix it for you
Click to expand...
Click to collapse
Apparently some guys use heimdall with P7300...
Yes the tab is really broken now !
Thanks for helps given by each guy here ! Thanks a lot.

arnouf said:
Apparently some guys use heimdall with P7300...
Yes the tab is really broken now !
Thanks for helps given by each guy here ! Thanks a lot.
Click to expand...
Click to collapse
What I remember is Heimdall doesn't work with my P7310 and it don't let me do anything.
Anyway, plug into a Windows machine running Odin 1.85 (I think this version it's fine) your tab, press 10 seconds UP and power button and see if your tab is detected. In that case try to flash stock package again.
Some time ago it happened to me with a Galaxy Ace phone, when phone is booting screen was off but the phone enters into download mode anyway and you could flash whatever you want.
A last shot for you could be disassemble your tab and pull off battery. Wait some minutes and then pull on again. Try to start in download mode with tab plugged into your computer. If you don't have enough knowledge to disassemble your tab (and I can assure you of that it's not easy) maybe you need to bring it to Samsung support.

jolinnard said:
What I remember is Heimdall doesn't work with my P7310 and it don't let me do anything.
Anyway, plug into a Windows machine running Odin 1.85 (I think this version it's fine) your tab, press 10 seconds UP and power button and see if your tab is detected. In that case try to flash stock package again.
Some time ago it happened to me with a Galaxy Ace phone, when phone is booting screen was off but the phone enters into download mode anyway and you could flash whatever you want.
A last shot for you could be disassemble your tab and pull off battery. Wait some minutes and then pull on again. Try to start in download mode with tab plugged into your computer. If you don't have enough knowledge to disassemble your tab (and I can assure you of that it's not easy) maybe you need to bring it to Samsung support.
Click to expand...
Click to collapse
Heimdall works for our tablets. I use it for P7300, for example.

DemonGloom said:
Heimdall works for our tablets. I use it for P7300, for example.
Click to expand...
Click to collapse
Ok, so I don't know what could happen when I tried it, I think last time was in 2012 or maybe early 2013...

[Q] bricked N7000. how to get working again

I tried upgrading my international N7000 to CM10.3 following the instructions in
http://wiki.cyanogenmod.org/w/Install_CM_for_n7000
but now the phone won't even boot into the recovery, all it shows is
Samsung
GALAXY Note
GT-N7000
/ \
/ | \
/--*-\
When i tried flashin from my Mac iusing Heimdall,
the download finished on the mac, but on the N7000
it still showed the blue line etc. I waited a lng time and tried
rebooting, but got the above.
Re-flashing in Heimdall had no effect.
I then tried flashing
hardcore-speedmod-ics-recovery-n7000.tar
using Odin 3.185 from my VMwars Fusion XP install,
and that seemed to finish ok, but no luck either.
I looked for the latest CWM 6.0.4.3 recovery, but I cannot find any
odin-flashable format for it, and of course I cannot use the sdcard
as I cannot even boot into any recovery as is.
Can anyone suggest next steps?

sejtam said:
I tried upgrading my international N7000 to CM10.3 following the instructions in
http://wiki.cyanogenmod.org/w/Install_CM_for_n7000
but now the phone won't even boot into the recovery, all it shows is
Samsung
GALAXY Note
GT-N7000
/ \
/ | \
/--*-\
When i tried flashin from my Mac iusing Heimdall,
the download finished on the mac, but on the N7000
it still showed the blue line etc. I waited a lng time and tried
rebooting, but got the above.
Re-flashing in Heimdall had no effect.
I then tried flashing
hardcore-speedmod-ics-recovery-n7000.tar
using Odin 3.185 from my VMwars Fusion XP install,
and that seemed to finish ok, but no luck either.
I looked for the latest CWM 6.0.4.3 recovery, but I cannot find any
odin-flashable format for it, and of course I cannot use the sdcard
as I cannot even boot into any recovery as is.
Can anyone suggest next steps?
Click to expand...
Click to collapse
1st things 1st. Why would u use heimdall or odin? And what is your current ROM before trying to flash CM 10.3, was it stock? You should have looked for CWM recovery or Philz safe kernels as base when doing ROM flashing ESPECIALLY custom roms. From what you said, then can you still boot into download mode? I have no knowledge of heimdall so just download Stock Firmware, flash it with odin and see if you can boot your N7000 first.
The worst case scenarios is you are experiencing emmc bug-brick. go to the thread and read carefully to deduce your type of 'brick' and find solutions there. Good Luck.

I was on a stock 4.0.4 (but rooted). I originally tried flashing the cwm from the sd card, but after starting to load it it also just hung,
so I looked for an alternative..
I found a post on stockroms (http://forum.xda-developers.com/showthread.php?t=1424997) but the links all point to hotfile.com. which my browser says it cannot find. is hotfile dead? Is there an alternative?

sejtam said:
I was on a stock 4.0.4 (but rooted). I originally tried flashing the cwm from the sd card, but after starting to load it it also just hung,
so I looked for an alternative..
I found a post on stockroms (http://forum.xda-developers.com/showthread.php?t=1424997) but the links all point to hotfile.com. which my browser says it cannot find. is hotfile dead? Is there an alternative?
Click to expand...
Click to collapse
Go to sammymobile.com if I'm not wrong. Download the stock firmware there. Rooted but do u have cwm installed? Rooted doesn't mean you have cwm installed.
Sent from my GT-N7000 using XDA Free mobile app

same problem
Jackwu696 said:
Go to sammymobile.com if I'm not wrong. Download the stock firmware there. Rooted but do u have cwm installed? Rooted doesn't mean you have cwm installed.
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
i have the same problem , only mine loads into the recovery menu , ive tried finding a working odin to nstall it back to factory.
when i had this problem last night , i wasnt sure what i done but i managed to install a custom rom and that worked but now i seem to be getting status 7 error ,
my computer wont recognise my phone so i cant do anything that way . any ideas or links to solutions will be appreciated

i have the same problem

conanbrapp said:
i have the same problem , only mine loads into the recovery menu , ive tried finding a working odin to nstall it back to factory.
when i had this problem last night , i wasnt sure what i done but i managed to install a custom rom and that worked but now i seem to be getting status 7 error ,
my computer wont recognise my phone so i cant do anything that way . any ideas or links to solutions will be appreciated
Click to expand...
Click to collapse
I'm sorry so did u succeed or did you not succeed in installing the custom rom? If your custom rom boots fine then all u need is to search for solving status 7 error thread. My advice to all noobs is to always try n avoid installimg anything except stock rom in odin. Always read and re read before flashing anything that's beyond your knowledge. Basic knowledge of flashing cusroms is :
1. ALWAYS make sure you're on SAFE and COMPATIBLE KERNEL. Most rom threads ALWAYS Include threads/links to a specific recovery/kernel to use. Read n RE READ that.
2. Wipe everything IN RECOVERY mode before flashing a rom.
Sent from my GT-N7000 using XDA Free mobile app

fixed miine
Jackwu696 said:
Go to sammymobile.com if I'm not wrong. Download the stock firmware there. Rooted but do u have cwm installed? Rooted doesn't mean you have cwm installed.
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
Jackwu696 said:
I'm sorry so did u succeed or did you not succeed in installing the custom rom? If your custom rom boots fine then all u need is to search for solving status 7 error thread. My advice to all noobs is to always try n avoid installimg anything except stock rom in odin. Always read and re read before flashing anything that's beyond your knowledge. Basic knowledge of flashing cusroms is :
1. ALWAYS make sure you're on SAFE and COMPATIBLE KERNEL. Most rom threads ALWAYS Include threads/links to a specific recovery/kernel to use. Read n RE READ that.
2. Wipe everything IN RECOVERY mode before flashing a rom.
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
im not Sure what i did , i unbricked (soft) and successfully installed kitkat not sure exactly how but it worked.... still have root too ... had and error about needing to wipe data for suib i think but thats the only fallback i fell into

conanbrapp said:
im not Sure what i did , i unbricked (soft) and successfully installed kitkat not sure exactly how but it worked.... still have root too ... had and error about needing to wipe data for suib i think but thats the only fallback i fell into
Click to expand...
Click to collapse
If you're able to boot up properly n prompted to wipe, then do it. But do it in recovery not on device.

Ok, I downloaded one of the stock kernels for my internatinal N7000, but flashing that with Odin 3.185 hangs about 3/4 through (has now been
sitting there for >60 mins).
Looks like I am screwed?
The file I found is KIES_HOME_N7000XXLT4_N7000OXALT4_1103517_REV02_user_low_ship.tar.md5
I f I wanted to try flashing this with Heimdall, I'd need to know partition numbers I think
Where can I get those?
Or should I get another file?

sejtam said:
Ok, I downloaded one of the stock kernels for my internatinal N7000, but flashing that with Odin 3.185 hangs about 3/4 through (has now been
sitting there for >60 mins).
Looks like I am screwed?
The file I found is KIES_HOME_N7000XXLT4_N7000OXALT4_1103517_REV02_user_low_ship.tar.md5
I f I wanted to try flashing this with Heimdall, I'd need to know partition numbers I think
Where can I get those?
Or should I get another file?
Click to expand...
Click to collapse
Before that, do u have KIES installed? KIES is NOT compatible with odin and will cause potential trouble. So is some firewall and antivirus apps. You need to disable all of them before using odin. Please search the thread http://www.sammobile.com/firmwares/ for stock rom site.
Sent from my GT-N7000 using XDA Free mobile app

Ok. I downloaded two stock roms from sammobile:
[email protected] 1 mathias staff 808649674 May 9 10:53 N7000XXLT5_N7000MBCLT1_MBC.zip
[email protected] 1 mathias staff 750466356 May 9 10:50 N7000XXLRL_N7000OXELR5_MBC.zip
but both fail with some (unreadable, apparently character set issue) error under ODIN.
I found this:
http://droidangel.blogspot.sg/2012/01/samsung-galaxy-note-gt-n7000-all.html
which shows how to do a full flash , including PIT file, but the links again go to hotfile which seems to be down.
http://hotfile.com/dl/140099962/b9e0d63/Q1-20110914_16GB.pit.rar.html
Where can I get a) separate
CODE_N7000xxxxx_CLxxxxxxx_REVxx_user_low_ship.tar.md5
MODEM_N7000xxxxxx_REV_00_CLxxxxxx.tar.md5
GT-N7000-CSC-MULTI-xxxxxx.tar.md5
and the PIT file?

sejtam said:
Ok. I downloaded two stock roms from sammobile:
[email protected] 1 mathias staff 808649674 May 9 10:53 N7000XXLT5_N7000MBCLT1_MBC.zip
[email protected] 1 mathias staff 750466356 May 9 10:50 N7000XXLRL_N7000OXELR5_MBC.zip
but both fail with some (unreadable, apparently character set issue) error under ODIN.
I found this:
http://droidangel.blogspot.sg/2012/01/samsung-galaxy-note-gt-n7000-all.html
which shows how to do a full flash , including PIT file, but the links again go to hotfile which seems to be down.
http://hotfile.com/dl/140099962/b9e0d63/Q1-20110914_16GB.pit.rar.html
Where can I get a) separate
CODE_N7000xxxxx_CLxxxxxxx_REVxx_user_low_ship.tar.md5
MODEM_N7000xxxxxx_REV_00_CLxxxxxx.tar.md5
GT-N7000-CSC-MULTI-xxxxxx.tar.md5
and the PIT file?
Click to expand...
Click to collapse
Of course you fail... When using ODIN, U should have downloaded the .tar. if you downloaded a zip. then unzip it first to get the tar file, then you flash it with odin. All requests are included in the stock.tar And PLEASE DO NOT Play with PIT files if you don't know what you are doing.
So now what you need to do is. :
1. DISABLE KIES (Uninstall it better), Your firewall, antivirus.
2. Install CORRECT Samsung USB driver. (Search keyword "download samsung N7000 usb drivers")
3. Unzip your zip file and extract the tar.file.
4. Run ODIN as Administrator (Right click/run as)
5. Go to download mode. connect your device to Pc/laptop.
6. Wait until Odin detects your device, click AP/PDA and choose the tar file you extracted.
7. DO NOT tick partition.
8. Let it run

Of course I unzipped the zip to get a SINGLE .tar.md5, but flashing that fails on factoryfs about 3/4 through. consistently.

sejtam said:
Of course I unzipped the zip to get a SINGLE .tar.md5, but flashing that fails on factoryfs about 3/4 through. consistently.
Click to expand...
Click to collapse
Try updating your odin. Use the newest vers. And try and read this https://www.google.com/url?q=http:/...ds-cse&usg=AFQjCNGd2e3iG5hkDeo0KyAjGuCSfQSLUw . If All fails then it's a confirmed SUPER-BRICK and there's nothing except samsung service centre can help you now... Sorry for not being able to help more..

Thanks. That led me to
http://forum.xda-developers.com/showthread.php?t=1656635
where I found the PIT file, but for ROMs pointed to http://forum.xda-developers.com/showthread.php?t=1530501
which again points to hotfile and fileserve.com , which (besides being under maintenance) says
FileServe can only be used to download and retrieve files that you have uploaded personally.
which makes it useless for finding ROMs...

sejtam said:
Thanks. That led me to
http://forum.xda-developers.com/showthread.php?t=1656635
where I found the PIT file, but for ROMs pointed to http://forum.xda-developers.com/showthread.php?t=1530501
which again points to hotfile and fileserve.com , which (besides being under maintenance) says
FileServe can only be used to download and retrieve files that you have uploaded personally.
which makes it useless for finding ROMs...
Click to expand...
Click to collapse
His link to ROMS were basically the same ones you can download at sammobile.

only official binaries are allowed to be flashed

Why my samsung s10 exynos shows "only official binaries are allowed to be flashed"after my first reboot after root?
I only use magisk.

Root
[email protected] said:
Why my samsung s10 exynos shows "only official binaries are allowed to be flashed"after my first reboot after root?
I only use magisk.
Click to expand...
Click to collapse
Hi, you did something wrong in the critical part of the rooting process going to guess and say it was the main reboot after odin flash.
Had this issue 3 times, the best would be to follow this root process and READ everything line for line.
You'd be supersized that the smallest thing you've missed may have caused it.
To fix it, download original software for your model and country from SamMobile or any other form - use this software: https://forum.xda-developers.com/galaxy-s9/how-to/tool-frija-samsung-firmware-downloader-t3910584
Remember DO NOT DELETE THE .md5 from the file name after you've extracted it.
Root + TWRP Link: https://forum.xda-developers.com/showpost.php?p=79914231&postcount=125

fdeklerk said:
hi, you did something wrong in the critical part of the rooting process going to guess and say it was the main reboot after odin flash.
Had this issue 3 times, the best would be to follow this root process and read everything line for line.
You'd be supersized that the smallest thing you've missed may have caused it.
To fix it, download original software for your model and country from sammobile or any other form - use this software: https://forum.xda-developers.com/galaxy-s9/how-to/tool-frija-samsung-firmware-downloader-t3910584
remember do not delete the .md5 from the file name after you've extracted it.
Root + twrp link: https://forum.xda-developers.com/showpost.php?p=79914231&postcount=125
Click to expand...
Click to collapse
thank you very much

flash stock rom AP file to fix this issue and remember to flash CSC too

[email protected] said:
Why my samsung s10 exynos shows "only official binaries are allowed to be flashed"after my first reboot after root?
I only use magisk.
Click to expand...
Click to collapse
Something has gone wrong with your rooting, happened to me once.
Press and hold Volume-down, Bixby and Power button, connect phone with USB to PC, wait, release all buttons soon as Download screen appears. Now flash with stock firmware and start rooting from scratch.

FdeKlerk said:
Hi, you did something wrong in the critical part of the rooting process going to guess and say it was the main reboot after odin flash.
Had this issue 3 times, the best would be to follow this root process and READ everything line for line.
You'd be supersized that the smallest thing you've missed may have caused it.
To fix it, download original software for your model and country from SamMobile or any other form - use this software: https://forum.xda-developers.com/galaxy-s9/how-to/tool-frija-samsung-firmware-downloader-t3910584
Remember DO NOT DELETE THE .md5 from the file name after you've extracted it.
Root + TWRP Link: https://forum.xda-developers.com/showpost.php?p=79914231&postcount=125
Click to expand...
Click to collapse
So the same thing happened to me too while rooting my device so I tried to flash my device no matter what I do it won't flash sometimes the Odin gets stuck and sometimes it shows the process failed,I"be been trying to unbrick my phone from a week now but nothing seems to really work,so help if you can,thank you!

surajismarcus said:
So the same thing happened to me too while rooting my device so I tried to flash my device no matter what I do it won't flash sometimes the Odin gets stuck and sometimes it shows the process failed,I"be been trying to unbrick my phone from a week now but nothing seems to really work,so help if you can,thank you!
Click to expand...
Click to collapse
Hi, Ok the best way to do so is to get hold of stock firmware for your device.
Try this: https://forum.xda-developers.com/s10-plus/how-to/tool-frija-samsung-firmware-downloader-t3910594
Then secondly you will need the PIT file of your device !IF YOU BREAK YOUR PHONE IT IS NOT MY RESPONSIBILITY! :https://zfirmware.com/samsung-galaxy-s10-plus-g975-repair-firmware/
Make sure that when you select BL,AP,CP and CSC to leave the .md5 extension on the file, if all 4 loads without any errors and you have the correct PIT file you will be able to boot stock firmware.

In my case i had the same error because i flashed a modded debranded firmware without first flashing the stock AP.
So first, debrand you phone by flashing the stock debranded firmware, then flash the magisk patched version of it.
In other words, always flash the STOCK version of the firmware you want THEN flash the magisk PATCHED version (if you are moving from a version to another one, particularly if CSC is different).