Can anyone suggest me the best kernel for MIUI? Iam currently using WIUI 2.5.25.Thanks in advance...
ETaNa kernel by vadonka
I haven't tried Benee's GB version of Jarvis kernel, but expect it to be awesome too:
http://forum.xda-developers.com/showthread.php?p=28002757
I have flashed vodankas kernal.But it shows an error "Unable to mount /system". And its stuck at first LG logo screen.
I would say Etana for the speed, but It's unstable on my WIUI 2.5.25. Experiencing crashes, random shutdowns, battery sensor problems and HDMI out problems. Other than that(and if you are not using your phone as your alarm clock - almost slept in to work because the phone had shut down at night), it's a nice and fast kernel.
EDIT: Now using temasek's kernel - nice, fast and stable. Also RAMhack
Try a 2.6.y version of the kernel (older version) to check if it works
rugglez said:
Try a 2.6.y version of the kernel (older version) to check if it works
Click to expand...
Click to collapse
older versions says ROM is not supported
Tried Jarvis kernel?
rugglez said:
Tried Jarvis kernel?
Click to expand...
Click to collapse
Iam currently using Swiftxtreme 1.5 OC version.Didnt try jarvis..I will try it...thanks bro does it give a decent battery life?
Sorry I cannot comment on battery life since I haven't used the GB version of it, but it is a new one and will probably be updated from time to time. It comes from the developer of the popular vorkkernel.
rugglez said:
Sorry I cannot comment on battery life since I haven't used the GB version of it, but it is a new one and will probably be updated from time to time. It comes from the developer of the popular vorkkernel.
Click to expand...
Click to collapse
But jarvis kernel is only for ICS....
basimsherif3 said:
But jarvis kernel is only for ICS....
Click to expand...
Click to collapse
There is a GB version too here:
Jarvis for CM7/MIUI GB
rugglez said:
There is a GB version too here:
Jarvis for CM7/MIUI GB
Click to expand...
Click to collapse
that link is expired
Here you go
A newer version of Jarvis kernel from benee :
http://forum.xda-developers.com/showthread.php?p=28853815
Kernel that comes with miui seems to be working fine. But I suggest iron kernel ironkrnL48_GB-20120226h2037-prio-uv-jrnl-cam-app.
Sent from my Optimus 2X using Tapatalk
rugglez said:
Here you go
A newer version of Jarvis kernel from benee :
http://forum.xda-developers.com/showthread.php?p=28853815
Click to expand...
Click to collapse
thanks bro
rjjcvb said:
Kernel that comes with miui seems to be working fine. But I suggest iron kernel ironkrnL48_GB-20120226h2037-prio-uv-jrnl-cam-app.
Sent from my Optimus 2X using Tapatalk
Click to expand...
Click to collapse
Let me try it
I would also recommend jarvis. I have always liked Benees kernels, so if he release something, I always try it.
Sent from my LG-P990 using Tapatalk 2
I have tried jarvis's GB version..but stucked on LG logo
The last beta kernel (2.6.X) from Vadonka is amazing.
Thanks to him
Related
This is my kernel based on 2.2.2 kernel released by LG! This kernel has LG touchscreen fix and I've added OC from HERE, ext4 and btrfs support (btrfs is experimental) and VPN support (tun.ko module).
If you would like to use this kernel: http://www.multiupload.com/H3HQT7WMSY
Do not forget to make nandroid backup first.
Packaged in koush's anykernel for compatibility with any rom.
PS: Thanks to Mik_os for his patience
PPS: With my kernel I managed to use 806Mhz and it's works very well and it's stable for my phone.
Could you define optimised OC? How is it different from the OC supported by other kernels.
Thanks.
Sent from my LG-P500 using XDA App
socialdistortion said:
Could you define optimised OC? How is it different from the OC supported by other kernels.
Thanks.
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
I used a new patch and this one, modify only 2 kernel files!
I can go up to 806MHz, which is really the top frequency my phone can handle. And amazingly enough, the cpu spike isn't there What changes did you make?
Work like a charm, but lack insteractive mode in setcpu and when you put it in power mode it stay at max freq. Thanks for your work buddy.
hope you include this on your next ROM release.... more power to you sir!
Dook - is it the same updated OC code that Mik used in his latest 2 builds ?
bluviper said:
hope you include this on your next ROM release.... more power to you sir!
Click to expand...
Click to collapse
#fenice mount this kernel!
Zerobarat1 said:
Dook - is it the same updated OC code that Mik used in his latest 2 builds ?
Click to expand...
Click to collapse
Oh yes!
Can not be used in the ROM 2.3.3 Mik_os?
segyto said:
Can not be used in the ROM 2.3.3 Mik_os?
Click to expand...
Click to collapse
Arrrrgh this does not contain any of the patches needed by Gingerbread to function at least remotely fine .
Tried this kernel with LOLv1.2(froyo2.2) ROM,,Doesnt even stand up to SIppolo's super optimised kernel..After flashing this rom,phone got a little slower but like u said no more cpu spikes !!! THnx for posting
With my kernel I managed to use 806Mhz and it's works very well and it's stable for my phone.
so this actually worked? would flash and and test it on some games. and would post my feedback after. Thnx!
peacekeeper05 said:
so this actually worked? would flash and and test it on some games. and would post my feedback after. Thnx!
Click to expand...
Click to collapse
Anyway, i prefer use my phone at 729MHz or 768MHz!
yep.
confirmed, cpu spike is not there.
thanks!
Can you define which is the LG touch fix? I thought that LG never released a fix for the touch bug...
yelo3 said:
Can you define which is the LG touch fix? I thought that LG never released a fix for the touch bug...
Click to expand...
Click to collapse
in 2.2.2 v10R kernel LG released a fix for the touch bug!
sarfaraz1989 said:
Tried this kernel with LOLv1.2(froyo2.2) ROM,,Doesnt even stand up to SIppolo's super optimised kernel..After flashing this rom,phone got a little slower but like u said no more cpu spikes !!! THnx for posting
Click to expand...
Click to collapse
can anyone confirm this?
is it just for 2.2 or is 2.2.2 affected?
Can I flash this kernel into my AmberHome ROM (2.2)?
it has so small transitions in speed like from 600Mhz u cud scale upto 645Mhz..I like this
EDIT: yes u can check it out on any rom..It will work on any rom as it is packages like koush's style
umm..to all i9k users!
We got this Hummingbird and our beautiful hackable phone in here could any one give an advice on which kernel and rom package would be better when it comes to daily usage and having a well native OC/UV support,tweaks.
here are the ones that i knew..!
ROM's
Jetpack v4,Darky 10.3 EE,Cm7,MiUi Galnet,Insanity,SURFACE v3.4..etc!
Kernel's
Galaxian,Tegrak,Glitch(nly for Cm7 and MiUi),Semaphore,Darkcore,Hardcore Speedmod..!
and from all the above ones i just tried Darky v10.2+Darkcore it was "okay" and no OC support, can i get a kernel that has the power like Trinity Kernel for Nexus S and having some pretty good tweaks and enhanced UI ??
If you got any ideas just drop em right here!!
Try CM7 using stock kernel. you will never want to change.
Bork84 said:
Try CM7 using stock kernel. you will never want to change.
Click to expand...
Click to collapse
hmm..iv'e already had CM7 on it but it had few bugs like voodoo colour,sound were both not enabled and the random-reboots were very frequent..!
and if i flashed another kernel then how will it be?
Bork84 said:
Try CM7 using stock kernel. you will never want to change.
Click to expand...
Click to collapse
and dude actually your signature's got good info!
thnx..4 that!
Try Simply Honey 5.0
Galaxy S Simply Honey 5.0
prototype22 said:
Try Simply Honey 5.0
Galaxy S Simply Honey 5.0
Click to expand...
Click to collapse
can i know that does it have support for OC,Voodoo FIX's..??
Vote for Insanity's CM from me.
Haven't tried OC, but UV works fine and 1.6ghz OC is supported with kernels like Neo's platypus and Glitch.
Also gives good battery life even when using heavier.
Never got FC's or random reboots.
Wesku said:
Vote for Insanity's CM from me.
Haven't tried OC, but UV works fine and 1.6ghz OC is supported with kernels like Neo's platypus and Glitch.
Also gives good battery life even when using heavier.
Never got FC's or random reboots.
Click to expand...
Click to collapse
hmm..fine then, i must give a try!
Ashtrix said:
umm..to all i9k users!
We got this Hummingbird and our beautiful hackable phone in here could any one give an advice on which kernel and rom package would be better when it comes to daily usage and having a well native OC/UV support,tweaks.
here are the ones that i knew..!
ROM's
Jetpack v4,Darky 10.3 EE,Cm7,MiUi Galnet,Insanity,SURFACE v3.4..etc!
Kernel's
Galaxian,Tegrak,Glitch(nly for Cm7 and MiUi),Semaphore,Darkcore,Hardcore Speedmod..!
and from all the above ones i just tried Darky v10.2+Darkcore it was "okay" and no OC support, can i get a kernel that has the power like Trinity Kernel for Nexus S and having some pretty good tweaks and enhanced UI ??
If you got any ideas just drop em right here!!
Click to expand...
Click to collapse
Try Darky ROM v10.2.1 Golden Master
http://samsung-sgs.blogspot.com/2011/08/how-to-flash-darky-rom-v1021-beta1.html
Ashtrix said:
can i know that does it have support for OC,Voodoo FIX's..??
Click to expand...
Click to collapse
Yeah support voodoo color,sound
N Overclock
Galaxy S Simply Honey 5.0
anukilimanoor said:
Try Darky ROM v10.2.1 Golden Master
http://samsung-sgs.blogspot.com/2011/08/how-to-flash-darky-rom-v1021-beta1.html
Click to expand...
Click to collapse
What's the difference between the Golden master and EE ??
prototype22 said:
Yeah support voodoo color,sound
N Overclock
Galaxy S Simply Honey 5.0
Click to expand...
Click to collapse
Oh! That's great then i will definitely try it on my SGS !
I think u should also add option of hybrid and blockbuster rom with galaian gt or ee kernel or semaphore kernel u ll enjoy it
Sent from my GT-I9000 using XDA App
if you need a very stable and fast rom check this:
Code:
[URL="http://forum.xda-developers.com/showthread.php?t=1245296"]http://forum.xda-developers.com/showthread.php?t=1245296[/URL]
mirash11 said:
if you need a very stable and fast rom check this:
Code:
[URL="http://forum.xda-developers.com/showthread.php?t=1245296"]http://forum.xda-developers.com/showthread.php?t=1245296[/URL]
Click to expand...
Click to collapse
Ty for suggestion looks cool ,ill try for sure!
BaldozRom v6.1 with galaxian or Blockbuster with galaxian.
those two are the best for my opinion.
or darky's rom,when stable is out..
Ashtrix said:
What's the difference between the Golden master and EE ??
Click to expand...
Click to collapse
it's not much diference.EE is final.take a look at the changelog.
I'm on cm7 nightly 103. As there is no more nightlies coming for some obvious reasons, I decided to stick to this one until the new nightlies start rolling(#104 has battery drain issues and some other issues)... And after using this for over two weeks, I must say this is the most stable, fassst and battery efficient(60-70 hours on normal use- GPS, wifi, 3G triggered manually) rom I've ever flashed!!
Hi guys,
Currently i just rooted my phone and successfully install CM7 KANG by Koboltz (sorry if i spell it wrong ) ..many thanks bro for the KANGin... It really smooth and trouble free from my experience using it for 2 weeks now
Now I really want to take my O2X to the next level by try to install custom kernel on it .. and my choice is Vadonka's kernel http://forum.xda-developers.com/show....php?t=1427646
However i always failed to install the recent Update 2012.01.17 .. any version i tried I always got bootloop on CM7 logo...always stuck there and wont go in to the system.
The only Vadonka's kernel i managed to install successfully is LGE-KaNG_120109 its super smooth and stable but i got a bug that i cant play my PES 2012 on it -- PES always stuck on konami logo and then force close.
anybody have the same problem with me ?
Is there any way i cant play PES 2012 on that kernel (LGE-KaNG_120109).. or is there any settings that i need to change ?
And are there any way to know what causing bootloop on Vadonka's newest kernel ? -- maybe is there something i need to do to diagnostic this maybe ?
(yes i did all the clean / wipe stuff before and after installing) but still it bootloop on CM7 logo on newest kernel.
other than that Vadonka has created or KANG one of the best kernel i think for o2x -- at least that is what my friend said
but still thanks to Vadonka
Thanks in advance for any help guys
UPDATE:
I tried Vadonka's latest Update 2012.01.18 but it still give me bootloop on CM7 logo.
I did try to use init remover by Vadonka to remove init script
I did try to disable compcache in CM7 setting
I did wipe cache and dalvik
Still i'm not able to boot
Try temasek's kang (link in signature) maybe this will work.
I see, I will try temasek's KANG... been actually thinking ti change rom but still learning about this rom and kernel stuff.
Thanks for the advice
Sent from my Optimus 2X using XDA App
Installing Vadanko tweaks failed for me aswell :-(. My battery drain is ridiculous (think I'll just have to settle with a spare battery)
I'm running Temasek kang and it is quite good.
Sent from my Optimus 2X using xda premium
Temasek rules!...
I use "CherryPics" Kernel (for CM7/Kang) with it
May be a driver/hardware module that causes your phone to hang and some other versions? (these parts are very "ROM specific" or Kernel inclusions...)
Yes I did try to use Temasek's kang #50 now, but still unable to use Vadonka's latest kernel.
Well on the good side, Temasek's kang #50 is bullet fast and rock stable for me. .. and after applying androidon tweak its just like bullet covered in butter.
I must say many thanks to Temasek, AndroidON and surely CM team and every other coder.
But I still kinda curious to try Vadonka's kernel....hope better luck next time
Sent from my Optimus 2X using XDA App
Hmm... There was a guy who had just the same problem as you, he couldn't boot any kernel versions after 9 January, so maybe you could try this version... Try searching for it at vadonkas thread.
SP1996AC said:
Hmm... There was a guy who had just the same problem as you, he couldn't boot any kernel versions after 9 January, so maybe you could try this version... Try searching for it at vadonkas thread.
Click to expand...
Click to collapse
Vadonka's kernel on 9 January is working fine, but still got several apps wont run on it .. one example is PES 2012, which always freeze and yhen fc.
I see that he is building new kernel (ETaNa).. wonder if this one might work ? I mean is it completely new? Cause I see its said that the installer will recognize something
Sent from my Optimus 2X using XDA App
I don't know if it is completely new, AFAIK, he only give it a new name...
Same issue here, after the jan09 version, i got a bootloop. Etena version same issue.
I would like to ask if I install custom kernel that is released by vadonka (the latest one is 30 Jan). Is there any problem if I flashed hybrid revolution v3.1 with the latest one??
Flewoutthecuckoonut said:
I would like to ask if I install custom kernel that is released by vadonka (the latest one is 30 Jan). Is there any problem if I flashed hybrid revolution v3.1 with the latest one??
Click to expand...
Click to collapse
I'm not sure about this but afaik vadonka made a lot of tweak along with his kernel and that might conflict with tweak in gueste rom .. please correct me if I'm wrong.
I think its better to wait kernel only installer from vadonka or you can try temasek kernel only.
I would like to try gueste 3.1 rom but maube I'll wait for it this weekend.
Sent from my Optimus 2X using XDA App
You can try out IronKrnl . The 32MB version has been stable for me for the last two days . And I have infact patched IronKrnl with Vadonka's init.d AIO tweaks and trying that out now . Vadonka's kernel was fast when I had it on my O2X but I experienced frequent FC's with the phone radio so I reverted back to stock CM7 kernel and patched IronKrnl . Having said that I think Vadonka's kernel is likely to be newer and more optimised if it gets stable
Always take a Nandroid backup of the existing stock & stable image before flashing a new kernel . It saves a lot of a headache . And to flash a totally different kernel I would recommend you to revert to stock and then flash the new kernel . The faster way would be to revert only the boot.img file but that might leave behind some stray settings .
also i have problem with the newest etana kernel by vadonka, it makes the cpu getting hot , and dont know why
Try to flash back prior to installing vadonka's kernel. Apparently there are some issues with his current kernel that I've experienced as well so it's better off with the stock kernel.
Currently I'm stick with Temasek kang #55 and with default kernel. Its been very stable and smooth for a week now, and u don't even have charging BSOD again since I set the screen awake while charging.
Latest Temasek kang #58 is out now, and I have yet to decide if I want to use it or use Gueste 3.1
Anyone tried gueste 3.1 from CM 7 without data wipe? ? ( only cache and dalvik wipe) cause I don't want to install all my programs from scratch. Is it even possible, since gueste 3.1 is also based on CM 7 ?
Sent from my Optimus 2X using XDA App
Hi,
I've been using Gueste 3.2 hybrid revolution for a day now, and i muat admit this is the smoothest rom i ever use in my entire o2x life.
The stock lg launcher is covered with butter. I even try to install go launcher ex, and ita still very smooth like never before.
Then i say many many thanks to Mr. Temasek for his Kang efforts and Mr. Stefan for this smooth rom.
My other experience today is for the pimp my cpu app always ask for super user privilege ... I always set to allow and tick on the remember box ... but it always keep asking.
For that i maybe a noob because i don't know how to sett the proper super user... but no impact on performance whatsoever until now.
Anybody know how to use pimp my cpu ? or atleast make it not keep asking for super user privilege. ?
I'm currently using Temasek Cm 7 kernel + voodoo sound dated 7 feb 2012 .. downloaded from Temasek mediafire.
Thanks in advance
Sent from my Optimus 2X using XDA App
bekaman said:
Vadonka's kernel on 9 January is working fine, but still got several apps wont run on it .. one example is PES 2012, which always freeze and yhen fc.
I see that he is building new kernel (ETaNa).. wonder if this one might work ? I mean is it completely new? Cause I see its said that the installer will recognize something
Sent from my Optimus 2X using XDA App
Click to expand...
Click to collapse
Hi everybody!
Has been solved the problem with some apps and the etana kernel??
Thanks
My english is very bad because i´m spanish and i don´t know very well english :S
Hi elmenda,
I don't have any problems with my current setup (check the sig)! I haven't tried PES2012 though.
Bienvenido
Thats is very strange because I've got Etana_Hoc_lite_otf kernel and is impossible to install any pirate apps
I'm not the only who has these problem, because i've read the same error in other thread
Enviado desde mi Optimus 2X usando Tapatalk
Guys what it the best kernel for checkrom V6?
I mean.. i want advices BUT why did you made such a choice?
For me it is Franco hands down. Tested v2, v6 and the latest 'test' one (this will become v10 tomorrow or the day after, judging by the users' comments), and all proved to be smooth, fast, stable and easy on the battery on my Note.
I would second Franco kernel also. Been using it since v6 had no problems with lag at all. Battery life with this combination seems good as well.
Now this is a good start
I have been in CF ROOT for XXLC1 but i dunno why i feel the stock kernel is a little bit lagged in menus!
Will try Franco Kernel
Thanks for your replys!
zylor said:
Now this is a good start
I have been in CF ROOT for XXLC1 but i dunno why i feel the stock kernel is a little bit lagged in menus!
Will try Franco Kernel
Thanks for your replys!
Click to expand...
Click to collapse
Franco 9.....pure awesomeness !! Best battery backup m getting by using it. Earlier tried Abyss 4.2 but got a high battery drain !
Go for Franco !!!
but doesn't changing the kernel change some supported features in the rom ? like ntfs support for instance ?
ages_devil said:
but doesn't changing the kernel change some supported features in the rom ? like ntfs support for instance ?
Click to expand...
Click to collapse
Check the changelogs of the kernel you are about to use it will give you all the salient features and changes that it has and can happen!
Cheers!
Hey guys,
Don't wanna seem like jacking the thread, but is it possible to install Vertamus's ICS theme in V6?
itismadhan said:
Hey guys,
Don't wanna seem like jacking the thread, but is it possible to install Vertamus's ICS theme in V6?
Click to expand...
Click to collapse
Yeah of course! I have it installed on my phone. just go to the inbuilt kitchen (update it to the latest version from google play store) and download the file given there under the themes section. Its version1.1 as of now. And install it in recovery !!
Cheers! Hit thanks if it helped!
I was using stock CF-Root and it was fine, but the battery drain was a bit higher vs V5 CheckROM. Installed Franco and its running great, 1.5% Per Hour idle.
was using checkrom v6 with Franco's test kernel. Seems like its draining battery more than stock. Gonna verify it over the nxt few days by using stock
Also on Franco test kernel.
Also on franco kernel v9, works like a charm. Good battery life but no as good as CheckROM v5 & franco v6
For me Franco kernel cause constant sods.
I keep trying a newer versions and still same issue. This problem doesn't occur for me on other kernels
Sent from my GT-N7000 using xda premium
Blue1k said:
For me Franco kernel cause constant sods.
I keep trying a newer versions and still same issue. This problem doesn't occur for me on other kernels
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Yeah for some of the users Franco gives sods or screen salad issue - pixelated screen while other kernels work fine for them! Thankfully works fine for me
abhisahara said:
Yeah for some of the users Franco gives sods or screen salad issue - pixelated screen while other kernels work fine for them! Thankfully works fine for me
Click to expand...
Click to collapse
Well Franco works like a charm so far.. have been testing it for over 2 weeks and works very nicely ^^
Can't barely wait for V7.. Gotta wait for jkay's magic
can someone please post links to francos kernels especially v 9 and other GB kernels,
is abyss 4.2 kernel GB kernel ?
theres something wrong with the way im searching....im going round and round
Abysskernel.
Running on it without any problem.
Sent from my GT-N7000
rraaka said:
can someone please post links to francos kernels especially v 9 and other GB kernels,
is abyss 4.2 kernel GB kernel ?
theres something wrong with the way im searching....im going round and round
Click to expand...
Click to collapse
Abyss 4.2 is a gb kernel. Don flash it in a ICS
Sent from my GT-N7000
Hey,
im looking for speedup for my stock v20s version phone.. i know there is many kernels and addons for v20 but which one are for v20s and what works best? im looking for OC kernel, stable as possible and maybe some addons to speedup phone(and maybe other cool addons).. my ram is always finish and i think thats why my phone is so f*king slow (my old htc desire works so much faster than O2X..)
i have installed this addon back already
im sorry for my bad english and if there is already threads about that..
jupsu3 said:
Hey,
im looking for speedup for my stock v20s version phone.. i know there is many kernels and addons for v20 but which one are for v20s and what works best? im looking for OC kernel, stable as possible and maybe some addons to speedup phone(and maybe other cool addons).. my ram is always finish and i think thats why my phone is so f*king slow (my old htc desire works so much faster than O2X..)
i have installed this addon back already
im sorry for my bad english and if there is already threads about that..
Click to expand...
Click to collapse
Try SPiCA or flix kernels...and if you are thinking of a custom ROM with stock base.think about django manouche 1.5rc2 with aroma installer and the ram never gets low by using multi tasking selection.kernels are part of the installer.try it mate
O2X with Magical ROM and supersonic kernels from my buddies
SREEPRAJAY said:
Try SPiCA or flix kernels...and if you are thinking of a custom ROM with stock base.think about django manouche 1.5rc2 with aroma installer and the ram never gets low by using multi tasking selection.kernels are part of the installer.try it mate
O2X with Magical ROM and supersonic kernels from my buddies
Click to expand...
Click to collapse
can you help me to choose right kernel, there is so many..=/
and same for powerpacks if you think i should instal it too..
i cant post links to other sites.. This is spica kernel thread?
Install latest Django Rom it has kernel aswell performance packs, no confusion.
Choose HP kernel during installation
Sent from my LG-P990 using Tapatalk 2
spica1234 said:
Install latest Django Rom it has kernel aswell performance packs, no confusion.
Choose HP kernel during installation
Sent from my LG-P990 using Tapatalk 2
Click to expand...
Click to collapse
i will try that, tanks, do i need full wipe when i come from stock rom? or only dalvik+cache?