Database Develop

Help me please

hello guys
how can I update my milestone by cm7 to cm7.1
I read the instructions doosh good but when I go into recovery and do apply sd card update him try to open my zip file, but then I get is: signature verification failed
installation aborted
help me

teto.71 said:
hello guys
how can I update my milestone by cm7 to cm7.1
I read the instructions doosh good but when I go into recovery and do apply sd card update him try to open my zip file, but then I get is: signature verification failed
installation aborted
help me
Click to expand...
Click to collapse
So you are already on CM7? Try another OR, like FuFu's mod or AOR.
Sent from my Milestone using XDA Premium App

yes i have installed cm7.0.3 on my milestone one month ago

teto.71 said:
yes i have installed cm7.0.3 on my milestone one month ago
Click to expand...
Click to collapse
Which version of OpenRecovery are you currently using?
Sent from my Milestone using XDA Premium App

after a series of mega-trials and failures (see error in the first post with Open recovery (in different versions), I was able to install the cm7 with rds lite vers.1.46 and that package I downloaded there I made ​​the
then if you have tips or links to be able to install the cm7.1 thank you

teto.71 said:
after a series of mega-trials and failures (see error in the first post with Open recovery (in different versions), I was able to install the cm7 with rds lite vers.1.46 and that package I downloaded there I made ​​the
then if you have tips or links to be able to install the cm7.1 thank you
Click to expand...
Click to collapse
Once you have CM7 installed, all you need to do to get CM7.1 is wipe Dalvik cache and Cache Partition in OpenRecovery and change the baseband again.

Dalvik ok to wipe the cache and Cache Partition recovery in open, but how do I change the baseband?
I've just tried again but nothing ever cmq in openrecovery usual error

baseband shud b under settings in AOR

changed parameter in the base band, but unfortunately when I go into recovery apply update zip I go into the usual error verify update aborted signing error
how can I do to pull the damn control file?
or part dhoska there are other links x to update the milestone by cm7 cm7.1 miui apart because I do not like, thanks

[Q] Suggestions updating gt-i9000m (UGKG3) to ICS

Hi guys,
I've been having some issues while trying to update my gt-i9000m from gingerbread 2.3.3 to ICS.
I have rooted my phone successfully, at least I think I have as I was able to install super user/busy box/ROM Manager.
Whenever I attempt to enter CWM via the app I am still sent to the default Android system recovery <3e> screen and I receive an error saying E:failed to seek in /cache/update.zip (Invalid argument) E: signature verification failed and am unable to continue with flashing ICS onto my phone. If I attempt to CM9 from there I also receive a signature verification error.
I suspect this may have something to do with Super User failing to retain updates to the SU binaries. When running the update I am told that the update is successful and when I check I see that the latest version of the binary had in fact been pushed to my phone after restarting my phone these updates seemed to have disappeared.
Does anybody have an suggestions as to how I could continue with this update? I am using a rooted UGKG3 kernel to attempt the above.
Please let me know if I can provide any additional information...

You can try using finding a jw4/5/6 official firmware on xda and flashing it, probably ramad's thread. After letting it boot up, then try midnight gingerbread kernel via odin. From midnight's recovery, then try flashing the cwm flashable ics rom. Make sure to back up efs, sd card, and app data via titanium backup or something. Sorry, can't find links for you, on phone.
Sent from my GT-I9000 using xda app-developers app

ikuba said:
Hi guys,
I've been having some issues while trying to update my gt-i9000m from gingerbread 2.3.3 to ICS.
I have rooted my phone successfully, at least I think I have as I was able to install super user/busy box/ROM Manager.
Whenever I attempt to enter CWM via the app I am still sent to the default Android system recovery <3e> screen and I receive an error saying E:failed to seek in /cache/update.zip (Invalid argument) E: signature verification failed and am unable to continue with flashing ICS onto my phone. If I attempt to CM9 from there I also receive a signature verification error.
I suspect this may have something to do with Super User failing to retain updates to the SU binaries. When running the update I am told that the update is successful and when I check I see that the latest version of the binary had in fact been pushed to my phone after restarting my phone these updates seemed to have disappeared.
Does anybody have an suggestions as to how I could continue with this update? I am using a rooted UGKG3 kernel to attempt the above.
Please let me know if I can provide any additional information...
Click to expand...
Click to collapse
What kernel did you use to install recovery?
I remember reading back when, don't bother with ROM manager for anything. Getting into the right(?) recovery and having to change zip names....
And presumably you've seen this thread:
[HOWTO] Flashing CWRecovery to i9000m & upgrade to ICS AOSP 4.x ROM from any version

First. I think you need flash clockworkmod recovery, it help you flash a Custom rom
Gửi từ GT-I9001 của tôi bằng cách sử dụng Tapatalk 2

nyloncrack said:
What kernel did you use to install recovery?
I remember reading back when, don't bother with ROM manager for anything. Getting into the right(?) recovery and having to change zip names....
And presumably you've seen this thread:
[HOWTO] Flashing CWRecovery to i9000m & upgrade to ICS AOSP 4.x ROM from any version
Click to expand...
Click to collapse
I had not seen that thread, I'll try it out thanks!

Problem 'System Update Failed'?

Can anyone help me, I've tried to update to JB but I keep getting this same error.. I have root and locked bootloader (i even tried factory resetting)
Sent from my XT890 using xda app-developers app

Anyone know what Im doing wrong?
Sent from my XT890 using xda app-developers app

Do you have CWM recovery installed?

I do not
Sent from my XT890 using xda app-developers app

What is your system version, how are you trying to update and what kind of error do you get? If you explain your problems someone might give you a solution.

free2live said:
What is your system version, how are you trying to update and what kind of error do you get? If you explain your problems someone might give you a solution.
Click to expand...
Click to collapse
The system version is in the attached image. i
i've been trying the OTA update, i got a popup a few hours ago.. the problem basically is this, the phone shuts down to install the update, a green android with a blue spherical spinning thing appears, then about quarter of the way (you can see the blue progress bar below the droid) it freezes for a little bit then a green droid with a red warning sign appears with a frozen blue bar at the quarter way point and the phone reboots and it then says 'System Update Failed' once booted into the homescreen
Sent from my Razr I XT890

That's odd. Try to re-download the update as it may be corrupted. I don't know of any reason why the update would not be installed even though you are rooted on a locked bootloader.

Manually install the update through Recovery. This will give us the full error.
Sent from my Galaxy Nexus using Tapatalk 2

Hi,
I get an error too when I try to install the new OTA update to JB.
I get this on CWM:
- "Install untrusted package ?" I enter "Yes - install untrusted zip"
With details:
"E: failed to verify whole-file signature
E: signature verification failed"
Next error:
"file_getprop: failed to stat "/system/build.prop": No such file or directory
E: Error in /cache/Blur_Version.81.5.40002.XT890.Retail.en.EU.zip (status 7)
Installation aborted"
So I try reboot system now, but the phone reboot and try ti update again.
What can I do please ? I tried a wipe date without success.
Thanks.
I'm trying to wipe cache and downloading the update again at this time.

GuiGuiGTT said:
Hi,
I get an error too when I try to install the new OTA update to JB.
I get this on CWM:
- "Install untrusted package ?" I enter "Yes - install untrusted zip"
With details:
"E: failed to verify whole-file signature
E: signature verification failed"
Next error:
"file_getprop: failed to stat "/system/build.prop": No such file or directory
E: Error in /cache/Blur_Version.81.5.40002.XT890.Retail.en.EU.zip (status 7)
Installation aborted"
So I try reboot system now, but the phone reboot and try ti update again.
What can I do please ? I tried a wipe date without success.
Thanks.
I'm trying to wipe cache and downloading the update again at this time.
Click to expand...
Click to collapse
You have to uninstall the CWM recovery to use OTA update

mattlgroff said:
Manually install the update through Recovery. This will give us the full error.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
How would I do this?
@free2live Ive tried it 2-3 times now with no luck
Sent from my Razr I XT890

Ok ! So simple... Thanks free2live !!
I will try this :victory:

AW: Problem 'System Update Failed'?
Manny- said:
How would I do this?
@free2live Ive tried it 2-3 times now with no luck
Sent from my Razr I XT890
Click to expand...
Click to collapse
Nevermind, it wasn't your Error
Damn i should read better.
Sent from my XT890

HSD-Pilot said:
Your Screenshot is Orange GB and your Error Message shows the Retail EU Update.zip.
Maybe you should try the orange GB JB with an Stock Recovery
Sent from my XT890
Click to expand...
Click to collapse
I think the error message was posted by someone else

AW: Problem 'System Update Failed'?
Lol...i figured it out
Sent from my XT890

Manny- said:
How would I do this?
@free2live Ive tried it 2-3 times now with no luck
Sent from my Razr I XT890
Click to expand...
Click to collapse
Boot to Motorola Recovery....install it...?
Not difficult.
Sent from my Galaxy Nexus using Tapatalk 2

How easy is it to do the whole motorola recovery process? Could I get a little help?
Please
Sent from my XT890 using xda premium

I removed CWM and I get exactly the same error as Manny-
I tried to boot to recovery but the screen stay black with the android doodle with the red warning... :crying:
After waiting several minutes, the phone reboots.

And now Superuser isn't working
Sent from my XT890 using xda premium

I had the same error while I had "[DeOdexed Rom] 81.5.31002 Retail Great Britain" from mattlgroff. Tried everything but ended up getting back to Stock ROM and was able to update normally.

[Q] ICS to JB update failed

I have a Droid 4 on Verizon ICS. Had Safestrap v3.05 TWRP v2.2.2.1. Removed Safestrap app but safestrap screen appears when booting and the menu is still functional. Still have OTA Root Keeper and it is unrooted and saved. Booted into recovery and tried to apply update from sdcard with the new Blur_Version.6.16.217.xt894.Verizon.en.US.zip.
Get assert failed: apply_patch_check("/system/bin/logwrapper", "f39fcb2d78b9e92e9fbedc6a62a047dc23459416", "4a63fec78956def045b442910a753fa640db8f5a")
E:Error in /tmp/sideload/package.zip
(Status 7)
Instalation aborted.
I tried to follow a Droid razors post on a similar error but could not figure out. What files I need to hunt down and delete? Must have missed some important steps along the way. I could use some help sorting this out.
Thanks for your help.

dsrock said:
I have a Droid 4 on Verizon ICS. Had Safestrap v3.05 TWRP v2.2.2.1. Removed Safestrap app but safestrap screen appears when booting and the menu is still functional. Still have OTA Root Keeper and it is unrooted and saved. Booted into recovery and tried to apply update from sdcard with the new Blur_Version.6.16.217.xt894.Verizon.en.US.zip.
Get assert failed: apply_patch_check("/system/bin/logwrapper", "f39fcb2d78b9e92e9fbedc6a62a047dc23459416", "4a63fec78956def045b442910a753fa640db8f5a")
E:Error in /tmp/sideload/package.zip
(Status 7)
Instalation aborted.
I tried to follow a Droid razors post on a similar error but could not figure out. What files I need to hunt down and delete? Must have missed some important steps along the way. I could use some help sorting this out.
Thanks for your help.
Click to expand...
Click to collapse
Its been posted all throughout this forum numerous times. Download ICS utility and ICS files and fast boot complete stock image. And please read before posting?
Sent from my DROID4 using xda app-developers app

rruleford said:
Its been posted all throughout this forum numerous times. Download ICS utility and ICS files and fast boot complete stock image. And please read before posting?
Sent from my DROID4 using xda app-developers app
Click to expand...
Click to collapse
Sorry I missed the STICKIES. Thanks for the info, though. It took some extra effort to get my phone to go back to stock even using the utility. But once back there, I got the OTA to install. Now, working on getting the new exploit to re-root it.
:good:

root to galxy s1

hello,
I'm trying to root a galaxy s i9000t. I installed Semaphore_JB_3.0.0s kernel, and i'm trying to install cyanogenmod cm-10.1.3-galaxysmtd rom.
unfortunately, when I try to install the rom it says:
finding update package...
opening update package...
installing update...
E: error in /external_sd/cm-10.1.3-galaxysmtd.zip (status 0)
installation aborted.
what do I need to do to fix it?

CWM
ofekfischer said:
hello,
I'm trying to root a galaxy s i9000t. I installed Semaphore_JB_3.0.0s kernel, and i'm trying to install cyanogenmod cm-10.1.3-galaxysmtd rom.
unfortunately, when I try to install the rom it says:
finding update package...
opening update package...
installing update...
E: error in /external_sd/cm-10.1.3-galaxysmtd.zip (status 0)
installation aborted.
what do I need to do to fix it?
Click to expand...
Click to collapse
Hello!
Do you have clockworkmod recovery installed?

_Flasher_ said:
Hello!
Do you have clockworkmod recovery installed?
Click to expand...
Click to collapse
yes

Where did you download cyanogenmod?
I think it could be corrupted.

_Flasher_ said:
Where did you download cyanogenmod?
I think it could be corrupted.
Click to expand...
Click to collapse
it doesn't let me to put a link. it's from cyanogenmod site, on galaxy s page, the first file

ofekfischer said:
it doesn't let me to put a link. it's from cyanogenmod site, on galaxy s page, the first file
Click to expand...
Click to collapse
Ok. You should try this.. get.cm/get/jenkins/42499/cm-10.1.3-galaxysmtd.zip
[EDIT] This is root package. You can flash it in cwm http://forum.xda-developers.com/attachment.php?attachmentid=402900&d=1284731367

_Flasher_ said:
Ok. You should try this.. get.cm/get/jenkins/42499/cm-10.1.3-galaxysmtd.zip
[EDIT] This is root package. You can flash it in cwm http://forum.xda-developers.com/attachment.php?attachmentid=402900&d=1284731367
Click to expand...
Click to collapse
both options failed. still getting the status 0 error message.

ofekfischer said:
both options failed. still getting the status 0 error message.
Click to expand...
Click to collapse
ClockWorkMod Menu problem look in My Android Solutions
[26] Problem:- ClockworkMod Recovery giving Status 0 error "Installation aborted".
Quote:
Solution:- Most likely you have a incompatible CWM, or your Zip files are corrupted or you have mounted /system or /data
what was your original ROM, if gingerbread, you cannot use semaphore JBean CWM but have to use Gingerbread CWM to flash ICS first than Jelly Bean later.
Check this out! You , YES! you are an " Android ". Not your phone but U.​

ofekfischer said:
hello,
I'm trying to root a galaxy s i9000t. I installed Semaphore_JB_3.0.0s kernel, and i'm trying to install cyanogenmod cm-10.1.3-galaxysmtd rom.
unfortunately, when I try to install the rom it says:
finding update package...
opening update package...
installing update...
E: error in /external_sd/cm-10.1.3-galaxysmtd.zip (status 0)
installation aborted.
what do I need to do to fix it?
Click to expand...
Click to collapse
Semaphore 3.0 is for stock JB roms and there is no such for i9000. Besides, semaphore uses its own recovery that is only CWM based, it isn't CWM.
Which firmware do you have? For Gingerbread you should have flashed Semaphore 2.7.4

The 100% working solution!!!!!
Re-Flash official Samsung ROM and its CF_root. Then install the ROM and everything will work awesome.
Make sure you are installing the ROM made for your i9000t and not for i9000

Rohitdahiya said:
The 100% working solution!!!!!
Click to expand...
Click to collapse
There are no 100% working solutions.
How will you feel if somebody reports you some day that such advice has ruined his/her device?