hello,
I'm trying to root a galaxy s i9000t. I installed Semaphore_JB_3.0.0s kernel, and i'm trying to install cyanogenmod cm-10.1.3-galaxysmtd rom.
unfortunately, when I try to install the rom it says:
finding update package...
opening update package...
installing update...
E: error in /external_sd/cm-10.1.3-galaxysmtd.zip (status 0)
installation aborted.
what do I need to do to fix it?
CWM
ofekfischer said:
hello,
I'm trying to root a galaxy s i9000t. I installed Semaphore_JB_3.0.0s kernel, and i'm trying to install cyanogenmod cm-10.1.3-galaxysmtd rom.
unfortunately, when I try to install the rom it says:
finding update package...
opening update package...
installing update...
E: error in /external_sd/cm-10.1.3-galaxysmtd.zip (status 0)
installation aborted.
what do I need to do to fix it?
Click to expand...
Click to collapse
Hello!
Do you have clockworkmod recovery installed?
_Flasher_ said:
Hello!
Do you have clockworkmod recovery installed?
Click to expand...
Click to collapse
yes
Where did you download cyanogenmod?
I think it could be corrupted.
_Flasher_ said:
Where did you download cyanogenmod?
I think it could be corrupted.
Click to expand...
Click to collapse
it doesn't let me to put a link. it's from cyanogenmod site, on galaxy s page, the first file
ofekfischer said:
it doesn't let me to put a link. it's from cyanogenmod site, on galaxy s page, the first file
Click to expand...
Click to collapse
Ok. You should try this.. get.cm/get/jenkins/42499/cm-10.1.3-galaxysmtd.zip
[EDIT] This is root package. You can flash it in cwm http://forum.xda-developers.com/attachment.php?attachmentid=402900&d=1284731367
_Flasher_ said:
Ok. You should try this.. get.cm/get/jenkins/42499/cm-10.1.3-galaxysmtd.zip
[EDIT] This is root package. You can flash it in cwm http://forum.xda-developers.com/attachment.php?attachmentid=402900&d=1284731367
Click to expand...
Click to collapse
both options failed. still getting the status 0 error message.
ofekfischer said:
both options failed. still getting the status 0 error message.
Click to expand...
Click to collapse
ClockWorkMod Menu problem look in My Android Solutions
[26] Problem:- ClockworkMod Recovery giving Status 0 error "Installation aborted".
Quote:
Solution:- Most likely you have a incompatible CWM, or your Zip files are corrupted or you have mounted /system or /data
what was your original ROM, if gingerbread, you cannot use semaphore JBean CWM but have to use Gingerbread CWM to flash ICS first than Jelly Bean later.
Check this out! You , YES! you are an " Android ". Not your phone but U.​
ofekfischer said:
hello,
I'm trying to root a galaxy s i9000t. I installed Semaphore_JB_3.0.0s kernel, and i'm trying to install cyanogenmod cm-10.1.3-galaxysmtd rom.
unfortunately, when I try to install the rom it says:
finding update package...
opening update package...
installing update...
E: error in /external_sd/cm-10.1.3-galaxysmtd.zip (status 0)
installation aborted.
what do I need to do to fix it?
Click to expand...
Click to collapse
Semaphore 3.0 is for stock JB roms and there is no such for i9000. Besides, semaphore uses its own recovery that is only CWM based, it isn't CWM.
Which firmware do you have? For Gingerbread you should have flashed Semaphore 2.7.4
The 100% working solution!!!!!
Re-Flash official Samsung ROM and its CF_root. Then install the ROM and everything will work awesome.
Make sure you are installing the ROM made for your i9000t and not for i9000
Rohitdahiya said:
The 100% working solution!!!!!
Click to expand...
Click to collapse
There are no 100% working solutions.
How will you feel if somebody reports you some day that such advice has ruined his/her device?
Related
NEVER MIND I HAVE SOLVED IT AND EVERYTHING IS OK
PLEASE HELP ME- i get an error whenever I try flashing a new rom
I have galaxy s, android 2.3.3
im using clockworkmod recovery v3.0.0.5 and my phone is already rooted of course
e: signature verification failed installation aborted
what should I do???
plz help me ppl!!!!
What ROM are you trying to install? Also how sure are you that you have CWM working?
Overcome
DrFredPhD said:
What ROM are you trying to install? Also how sure are you that you have CWM working?
Click to expand...
Click to collapse
I'm trying to install Overcome ROM on Galaxy Tab. I get the same error. When I boor in recovery.. I don't have that option to disable the signature thing.
Please help.
This is because you guys are in 3e Recovery. A new Recovery Mod where it only allow Signed Zip files.
Get back 2e Recovery. There are a lot of ways to do this. Search around the forum.
darixtorento said:
NEVER MIND I HAVE SOLVED IT AND EVERYTHING IS OK
PLEASE HELP ME- i get an error whenever I try flashing a new rom
I have galaxy s, android 2.3.3
im using clockworkmod recovery v3.0.0.5 and my phone is already rooted of course
e: signature verification failed installation aborted
what should I do???
Click to expand...
Click to collapse
Okay This is what I found.....
Flashing Recovery via the Rom manager app brings up 3E recovery. using the 3-button method brings up the 2E recovery that is part of my speedmod kernel......
Hope this helps other noobs like me having the same trouble.
I'm getting the same problem... any chance you could post how you solved it?
Im Am Trying To Root My Samsung Galaxy Ace gts5830 And Everytime i try to install the zip file provided by the forum I Keep Getting Error
E:Error In /tmp/sideload/package.zip Installation Aborted .............PLZ Help
What firmware are you running? If its ktq there's a previous step (cuz that firmwares system is full). There's a thread on that.
Other than that, which zip are you trying to flash (maybe link to post)?
How are you trying to flash it?
It Is Android Version 2.3.4......Baseband s5830dtlki4..........kernel 2.6.35.7-perf-cl568978 [email protected] #1.
Build Gingerbread.dtlki4
I Went into Recovery mode And Tried root.zip and update.zip wich i cant remember exact thread but both were of the forum
And Ive Read Lots And Cant figure it out
There's one called AceGingerRoot.zip, same stuff, go ro recovery (stock recovery, not cwm recovery) install zip from sd card. Then just update the superuser app from the market and its binary:
http://db.tt/e33J6E1P
Good luk
Thank U So Much It Worked ......
I am having the same problem, root.zip gives 'installation aborted'. I went to the link you gave for AceGingerRoot.zip and google chrome said 'malicious code and has blocked it'.
neuronetv said:
I am having the same problem, root.zip gives 'installation aborted'. I went to the link you gave for AceGingerRoot.zip and google chrome said 'malicious code and has blocked it'.
Click to expand...
Click to collapse
Which recovery mode are you using to install root- Stock or CWM?
mahithm said:
Which recovery mode are you using to install root- Stock or CWM?
Click to expand...
Click to collapse
thanks for your response but I've solved it now by doing the full /root/internal memory/ flash thing, I now have jellybean running on my SGA and lots more internal memory.
neuronetv said:
thanks for your response but I've solved it now by doing the full /root/internal memory/ flash thing, I now have jellybean running on my SGA and lots more internal memory.
Click to expand...
Click to collapse
:good:
Hi there,
I ran into a problem with two latest Asylum Roms (Asylum_CM10.1 20130416 Mako and n7000), after flashing I got Status 7 and installation is aborted on both; i got assert failed getprop("ro.product.device"). I was following instructions from http://forum.xda-developers.com/showthread.php?t=2098655&highlight=flash while on cm matrix kernel http://www.mediafire.com/?q6b645akxi99l27.
Yes I did various md5sum checks.
Can someone help me out to get Asylum Rom working?
USE CM 10.1 KERNEL..DOWNLOAD FROM http://forum.xda-developers.com/showthread.php?t=1789397. THIS WILL HELP FOR SURE.
will try now
thx
Mayank Chandwani said:
USE CM 10.1 KERNEL..DOWNLOAD FROM http://forum.xda-developers.com/showthread.php?t=1789397. THIS WILL HELP FOR SURE.
Click to expand...
Click to collapse
i just realized while doing a full wipe I get an error:
E: format_volume: make_extf4fs failed on /dev/block/mmcblklp2
Click to expand...
Click to collapse
Should I be verymuch worried or can one proced with this error?
Mayank Chandwani said:
USE CM 10.1 KERNEL..DOWNLOAD FROM http://forum.xda-developers.com/showthread.php?t=1789397. THIS WILL HELP FOR SURE.
Click to expand...
Click to collapse
After flashing the latest Kernel_CM10.1_Official_20130403_n7000_N8Mali.zip I still continue with the same status 7 and getprop error and the installation is aborted
laketbr said:
After flashing the latest Kernel_CM10.1_Official_20130403_n7000_N8Mali.zip I still continue with the same status 7 and getprop error and the installation is aborted
Click to expand...
Click to collapse
Ok my bad.
Too all newbies like me ( I only flashed just a few kernels and this is my 3rd rom i am flashing) :
Flashing with the latest CM 10.1 kernel and rebooting once (it will stuck on the Galaxy logo since no working rom is present), I rebooted to recovery again and so I managed to install the Asylum rom without a problem.
Learning by doing....
Sorry for my English.
My Nexus one is on Stock GB 2.3.6
I have searched for hours in google but I can't find solution.
I have tried flash 4 roms but still "Symlink: some symlink failed...(status 7) installation aborted".
I flashed it after full wipe so now I can't start my phone. Everytime it starts, it goes into recovery mode
I tried PASSIMG.zip method but my phone can't find that zip.
Help me!!!!
kulomo said:
Sorry for my English.
My Nexus one is on Stock GB 2.3.6
I have searched for hours in google but I can't find solution.
I have tried flash 4 roms but still "Symlink: some symlink failed...(status 7) installation aborted".
I flashed it after full wipe so now I can't start my phone. Everytime it starts, it goes into recovery mode
I tried PASSIMG.zip method but my phone can't file that zip.
Help me!!!!
Click to expand...
Click to collapse
I'm not expert but I suspect you have not installed the proper Hboot for the roms you are trying. Probably not large enough partitions. Try reading the instructions of either rom...
daaac said:
I'm not expert but I suspect you have not installed the proper Hboot for the roms you are trying. Probably not large enough partitions. Try reading the instructions of either rom...
Click to expand...
Click to collapse
Yep! I'm trying to install thiss CM10.1 rom and it just said that "Hboot : 250MB System". can you tell me how to partition of disk? because the disk not enough so i want to expand it
kulomo said:
Sorry for my English.
My Nexus one is on Stock GB 2.3.6
I have searched for hours in google but I can't find solution.
I have tried flash 4 roms but still "Symlink: some symlink failed...(status 7) installation aborted".
I flashed it after full wipe so now I can't start my phone. Everytime it starts, it goes into recovery mode
I tried PASSIMG.zip method but my phone can't find that zip.
Help me!!!!
Click to expand...
Click to collapse
kulomo said:
Yep! I'm trying to install thiss CM10.1 rom and it just said that "Hboot : 250MB System". can you tell me how to partition of disk? because the disk not enough so i want to expand it
Click to expand...
Click to collapse
Yup for VJ's CM 10.1, you will need to resize the HBOOT from 145/90 ( which is your default) to 260/10. You will need a tool called BlackRose to do this.
Detailed step by step information present here: http://forum.xda-developers.com/showthread.php?t=1804571
is messing with the partition necessary for the Sprint HTC One? Sorry just don't want to get all into this solution if it won't work for me like everything else. Thanks
Hello, I have a problem with the installation of the new maximus over the air update 10.0.0.1.
I've installed v10.0.0.0 without problems, afterwards I've got an update notification for 10.0.0.1, I've downloaded the file and the phone was rebooted to cwm, then I've got the follogwing error message:
ClockworkMod Recovery v6.0.3.1
E: Invalid command argument
Finding update package
E: unknown volume for path [0/Download/update_10.0.0.0-10.0.1.zip]
E: can't mount 0/Download/update_10.0.0.0-10.0.1.zip
Installation aborted
any advice how to solve this?
thanks in advance,
Chris
spooky32 said:
Hello, I have a problem with the installation of the new maximus over the air update 10.0.0.1.
I've installed v10.0.0.0 without problems, afterwards I've got an update notification for 10.0.0.1, I've downloaded the file and the phone was rebooted to cwm, then I've got the follogwing error message:
ClockworkMod Recovery v6.0.3.1
E: Invalid command argument
Finding update package
E: unknown volume for path [0/Download/update_10.0.0.0-10.0.1.zip]
E: can't mount 0/Download/update_10.0.0.0-10.0.1.zip
Installation aborted
any advice how to solve this?
thanks in advance,
Chris
Click to expand...
Click to collapse
Did you ask the OP and developer for Maximus? I would ask on their thread.
dgtiii said:
Did you ask the OP and developer for Maximus? I would ask on their thread.
Click to expand...
Click to collapse
Hello,
due to I'm a new user on the xda forum, I'm unfortunately not allowed to post in the maximus developer thread.
I should post 20 times in other forums and threads and then I'm able to post in a developer thread.
okay, once again I solved my problem on my own
I think the next time I will try some things before posting here...sorry.
I looked after the update zip file on the filesystem and as I found it, I tried a manual update in cwm, this works fine.
So only the update directly via the rom ota updater does not work...
spooky32 said:
okay, once again I solved my problem on my own
I think the next time I will try some things before posting here...sorry.
I looked after the update zip file on the filesystem and as I found it, I tried a manual update in cwm, this works fine.
So only the update directly via the rom ota updater does not work...
Click to expand...
Click to collapse
Yeah, sorry, I forgot about not being able to post on the developer's forums for you yet. Glad you got it fixed, sorry I didn't help more. Never hurts to ask, lots of good people here willing to help.