Screen Sensitivity - XPERIA X8 Q&A, Help & Troubleshooting

hi all, i installed GingerZaraki ROM with nAa 13 kernal and its it is really good..
though there is one problem..the screen sensitivity is mental..its really hard to accept a call as when you scroll from left to right it doesnt do it, its as if my finger goes to fast and it cant keep up, and when im scrolling through lets say the news. it will keep pressing on every story instead of scrolling as it should..
anyone have this issue??
ive been through the settings but cant see how to adjust the sensitivity.. any help would be appreciated, thanks

russy23 said:
hi all, i installed GingerZaraki ROM with nAa 13 kernal and its it is really good..
though there is one problem..the screen sensitivity is mental..its really hard to accept a call as when you scroll from left to right it doesnt do it, its as if my finger goes to fast and it cant keep up, and when im scrolling through lets say the news. it will keep pressing on every story instead of scrolling as it should..
anyone have this issue??
ive been through the settings but cant see how to adjust the sensitivity.. any help would be appreciated, thanks
Click to expand...
Click to collapse
I got that prob in other ROM
just try to flash the kernel again and the ROM
you can looking for module maybe..

Do you have the cypress or synaptics digitizer?
Skickat från min ST18i via Tapatalk 2

russy23 said:
hi all, i installed GingerZaraki ROM with nAa 13 kernal and its it is really good..
though there is one problem..the screen sensitivity is mental..its really hard to accept a call as when you scroll from left to right it doesnt do it, its as if my finger goes to fast and it cant keep up, and when im scrolling through lets say the news. it will keep pressing on every story instead of scrolling as it should..
anyone have this issue??
ive been through the settings but cant see how to adjust the sensitivity.. any help would be appreciated, thanks
Click to expand...
Click to collapse
:| ITS A BUG OF NAA kernel in GZR Read the thread alfs v08a is recommended
but hopefully rohin is trying his best in improving compatibility with Naa kernel
---------- Post added at 09:06 PM ---------- Previous post was at 09:03 PM ----------
devstaff said:
Do you have the cypress or synaptics digitizer?
Skickat från min ST18i via Tapatalk 2
Click to expand...
Click to collapse
but i also think synaptics and cypress matter just not so sure because i tried to use it and dont have problem and i'm cypress

Don't worry guys! It is already fixed. :good:

V08???
Sent from my E15i using xda premium

Related

[Q] GingerDX Camera Issue

Hi, since i move from FroyoBread to latest GingerDX im having some little issues in camera mode, my first shoot or after some shoots my camera turn black and the only way to back to work is force closing the camera app, this is happening in stock camera app and camera 360 ultimate.
Already did full wipe , cleaned davilk cache.
Im doing anything wrong ?
No one can help me ?
i have the same problems with you, after updated to GDX v.14 then installing xLoud and bravia engine module. my camera won't work.
anyone please help me.. maybe i should remove the module? and how?
Problem come back in ginger dx 022. Camera goes black after some shoots. Any solutions?
I have the same problem whit ip webcam, after some remote shot crashes
Any solution?
Hmm... ocassionally I have this problem too... it's a bug. I will add it to my GingerDX Bugs List thread...
Hit the THANKS button if I helped you!
This mail was delivered from my W8 using Tapatalk!!
It happened with me also, almost in all roms..
But it doesnt happens in PrimeHD4.0, it is a good rom
That doesn't happen also with GingerJHv2
I used GingerDX for a long time, the rom is great, but DX aren't really active on the forum this days. He surely is one of the best developers here and would have fix the cam problem in a few seconds
Sorry 4 the bad english
Camera solution
inouext said:
Hi, since i move from FroyoBread to latest GingerDX im having some little issues in camera mode, my first shoot or after some shoots my camera turn black and the only way to back to work is force closing the camera app, this is happening in stock camera app and camera 360 ultimate.
Already did full wipe , cleaned davilk cache.
Im doing anything wrong ?
Click to expand...
Click to collapse
all gingerdx rom has one error of camera(after some shoots camera turns black) soln is at at -> alamjitsingh.blogspot.in (ONLY 4 XPERIA X8)
alamjit_singh said:
all gingerdx rom has one error of camera(after some shoots camera turns black) soln is at at -> alamjitsingh.blogspot.in (ONLY 4 XPERIA X8)
Click to expand...
Click to collapse
It's a two year old thread!
Don't spam
----------------------------------------------------------
"Life is nothing without freedom!"
Gogeta said:
It's a two year old thread!
Don't spam
----------------------------------------------------------
"Life is nothing without freedom!"
Click to expand...
Click to collapse
better to "spam" than open new thread....help him or whatever instead of spamming
Sent from my X8 using xda premium
alamjit_singh said:
all gingerdx rom has one error of camera(after some shoots camera turns black) soln is at at -> alamjitsingh.blogspot.in (ONLY 4 XPERIA X8)
Click to expand...
Click to collapse
you cannot link people to other such forums. its against rules. you could end up getting banned. stop promoting that blog of yours on xda
i just solved the prob ok all ginger dx still hv same camera issue ..
Gogeta said:
It's a two year old thread!
Don't spam
----------------------------------------------------------
"Life is nothing without freedom!"
Click to expand...
Click to collapse
first thing i wana tell u all i'm not trying to promote my blog ..i know the latest version of gingerdx is 31b ....and this version also have the same camera issue ...m new user i dont know what are the rules of Xda ....but this model of mobile(xperia X8) now does not exist in market ...mean there r very few people who has this model of mobile nowdays ...and i also dont think they all know about how to flash roms ...the people who know about changing rom all r not using gingerdx........hence this small info cannot promote bolg of anyone ... m just trying to help nothing else
alamjit_singh said:
first thing i wana tell u all i'm not trying to promote my blog ..i know the latest version of gingerdx is 31b ....and this version also have the same camera issue ...m new user i dont know what are the rules of Xda ....but this model of mobile(xperia X8) now does not exist in market ...mean there r very few people who has this model of mobile nowdays ...and i also dont think they all know about how to flash roms ...the people who know about changing rom all r not using gingerdx........hence this small info cannot promote bolg of anyone ... m just trying to help nothing else
Click to expand...
Click to collapse
If you want to help feel free to post 'solutions' here...
Not links to other blogs...
----------------------------------------------------------
"Life is nothing without freedom!"
Well, I actually wanted to post a similar thread of my own. I have the exact same problem, except I'm on FroyoPro v2.5. The camera just goes black on some random occasion and you have to force close it and run it again. Happens on all camera programs, not just the one that came with the ROM. It's not really much of an issue because I don't use the camera daily, but if I was to go to a vacation or something and take >50 pictures, I'd say the camera fails about five times.
Perhaps an information of relevance would be that I have a Sandisk 8GB class 4 card. I don't remember having the problem before upgrading to a newer card, but then again I just could have been lucky. The card speed was tested and its sequential write speeds, 512k and 4k write speeds are all amazing. (could each of you who have this problem share which SD card you have?)
So, regardless of this being a two-year old thread, the problem is obviously still there, and there seems to be no solution. If someone knows what all of this is about, that would make my day
soln at
http://forum.xda-developers.com/showthread.php?t=1526628

is that problem solved yet???

hey guys....i'm just wondering if that screen sensitivity in cm7 roms fixed or not??
cuz it's the only problem for not moving from froyo to ginger roms..
thnx..
man_77 said:
hey guys....i'm just wondering if that screen sensitivity in cm7 roms fixed or not??
cuz it's the only problem for not moving from froyo to ginger roms..
thnx..
Click to expand...
Click to collapse
if you mean auto brightness, it works good for me on Ginger DX.
I think he mean's touch screen sensitivity
I tried tank hero with gx v13. When i swype it to move, it lags like 1 second n it doesnt move like what i wanted..
Sent from my X8 using xda premium
no man...like mqdjo said...i'm talkin abt screen sensitivity...it's damn problem on cm7 roms
Gruber11 said:
if you mean auto brightness, it works good for me on Ginger DX.
Click to expand...
Click to collapse
he means touch screen.
a couple of weeks ago a thread was opened up asking why some of the touch screen wasnt being sensitive at the bottom of the screen. i did replie. and all of us had come to the conclusion that it was mostly cm7/gingerbread roms that had that bug.
P.S no the bug has not been fixed yet but devs are still looking into it
hmm...well thanks for your response dude..hope they fix it

[Q] Touch lag!?

Hello all
I have a problem. I've installed miniCM10 JB 4.1.1. Everything was fine. I got smooth scrolling and my favorite game fruit ninja was running well. But as I set min CPU level to 245 to avoid the black screen bug, when unlocking, somthing whent wrong I think. I stared to have, buttons highligts, as thay are not touched. Picture scrambles, for a second for time to time. And fruit ninja has a heavy, I mean heavy lag. The game itself is running smooth, but touches appear after 3 to 5 seconds later. And some times touches are even not detected. I've experemented with various of options, in performance and developer options menu, no success. The menus and the ui are running smooth.
After that, i've restored the stock rom, via flash tool and stock kernel. Updated the phone via PC Companion, the phone running well, but even with the stock rom, I am getting the touch problem. Way ligher then it was in JB but is there. I've deleted any ext partitions on the sd card. Then flashed the alfs 8 kernel and installed GingerDX as it running perfectly on my phone, and the lag is the same as JB in fruit ninja. Other runnig smooth. Screen view is moving, even in recovery. Like you are not fixed your tv antena, and the picture is not centered but is shifted to the middle of the screen. In the upper side I see the bottom of the screen, if you can understand what I mean. So I am feeling that I have some hardware issue I guess. Any ideas.
Thank you very much.
I think that its a h/w issue.
Take your phone to SE.
Yes, it is a hardware problem......I had the same problem - lag in touches, random touches etc. and now the touch is not working at all.:crying:
Your best option is sending it to Sony....:good:
athulele said:
Yes, it is a hardware problem......I had the same problem - lag in touches, random touches etc. and now the touch is not working at all.:crying:
Your best option is sending it to Sony....:good:
Click to expand...
Click to collapse
Well it realy smell like HW problem. But the X8 is no more in warranty. So, what do you think will be the price for such repair.
dust in digitizer connector??
fotak-x said:
dust in digitizer connector??
Click to expand...
Click to collapse
It is highly unlikely.......maybe if he opened the phone....
but for me it is a HW prob..
athulele said:
It is highly unlikely.......maybe if he opened the phone....
but for me it is a HW prob..
Click to expand...
Click to collapse
but i think its the digitizer
fotak-x said:
dust in digitizer connector??
Click to expand...
Click to collapse
Possible, but I don't know where is the digitizer. I suppose I must remove the front panel, but I don't know how. I see there are some six corner screws on the back of the panel.
xxTTcc said:
Possible, but I don't know where is the digitizer. I suppose I must remove the front panel, but I don't know how. I see there are some six corner screws on the back of the panel.
Click to expand...
Click to collapse
there is some tuts to change digitizer u should use them
fotak-x said:
there is some tuts to change digitizer u should use them
Click to expand...
Click to collapse
Can you link some, because I've searched but didn't find. Thanks
xxTTcc said:
Can you link some, because I've searched but didn't find. Thanks
Click to expand...
Click to collapse
wate a lil bit
fotak-x said:
wate a lil bit
Click to expand...
Click to collapse
I am here. Thanks a lot.
xxTTcc said:
I am here. Thanks a lot.
Click to expand...
Click to collapse
didnt find what i want but this is also good,im gonna do this to, just to clean up my x8 :good:
http://erkinson.altervista.org/en/sony-ericsson-xperia-x8-smontaggio-e-sostituzione-display-touch/
fotak-x said:
didnt find what i want but this is also good,im gonna do this to, just to clean up my x8 :good:
http://erkinson.altervista.org/en/sony-ericsson-xperia-x8-smontaggio-e-sostituzione-display-touch/
Click to expand...
Click to collapse
That was my initial idea. Oke thanks anyway.
xxTTcc said:
That was my initial idea. Oke thanks anyway.
Click to expand...
Click to collapse
be carefull and dont break x8 :good:
use needed tools not something to sharp or someting that can brake x8 ....
fotak-x said:
be carefull and dont break x8 :good:
use needed tools not something to sharp or someting that can brake x8 ....
Click to expand...
Click to collapse
You too :good:
Final conclusion: CPU is dead...
That escalated rather quickly
Escalated for good. Now I am waiting my new XPERIA ACTIVE

CSL Mi410 touch getting weird

need help..my csl mi410 screen had a problem. alway touch by itself, when typing message it type by itself. what to do?please help~i have tested all the custom rom available in xda. still no luck.
cyruskojie said:
need help..my csl mi410 screen had a problem. alway touch by itself, when typing message it type by itself. what to do?please help~i have tested all the custom rom available in xda. still no luck.
Click to expand...
Click to collapse
this phone have are problem with hardware touch screen,try change you screen guard or dont use screen guard...
elol said:
this phone have are problem with hardware touch screen,try change you screen guard or dont use screen guard...
Click to expand...
Click to collapse
thank you elol for your kind reply, i never use any screen guard. frustrated with the screen. thinking of getting samsung i9000.
btw thank you for your response.
cyruskojie said:
need help..my csl mi410 screen had a problem. alway touch by itself, when typing message it type by itself. what to do?please help~i have tested all the custom rom available in xda. still no luck.
Click to expand...
Click to collapse
Having the same issue too, its a nightmare. Sometimes I can't even answer a damn call, its so embarrassing and annoying.
Sometimes I feel like smashing d the damn thing on a rock or something, God help me.
Sent from my Desire HD using xda premium
wesleyel said:
Having the same issue too, its a nightmare. Sometimes I can't even answer a damn call, its so embarrassing and annoying.
Sometimes I feel like smashing d the damn thing on a rock or something, God help me.
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
same thing here mate..love this phone so much, if only we have solution for this.
More option is,,change your Touch Panel with axioo Vigo410
Vigo has more high quality screen than CSL-Mi410 and the others
But,watchout about touch driver if you using Custom ROM
Need patch fix for properly working touches
Sent from my Spice Mi-410 using Tapatalk 2
I don't have the phantom touch problem but axis reversal bug is there since day 1. When the touch screen starts misbehaving, simply press the power button twice to turn off and on the screen (you must use something like the NoLock app to disable the lock screen) and the touch screen is reset.
Sent from my Spice MI-410 on my AOKP ICS 8.6.1
Arya_3RDNumber said:
More option is,,change your Touch Panel with axioo Vigo410
Vigo has more high quality screen than CSL-Mi410 and the others
But,watchout about touch driver if you using Custom ROM
Need patch fix for properly working touches
Sent from my Spice Mi-410 using Tapatalk 2
Click to expand...
Click to collapse
can you give me file touch panel axioo vigo410
---------- Post added at 03:29 PM ---------- Previous post was at 03:23 PM ----------
wesleyel said:
Having the same issue too, its a nightmare. Sometimes I can't even answer a damn call, its so embarrassing and annoying.
Sometimes I feel like smashing d the damn thing on a rock or something, God help me.
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
cool down man,for this time we dont have any dev for this device,only rom ported except
aben,ardx and tj-style,but for now tj-style cant help we all because got broken hardware for this phone...
---------- Post added at 03:30 PM ---------- Previous post was at 03:29 PM ----------
cyruskojie said:
thank you elol for your kind reply, i never use any screen guard. frustrated with the screen. thinking of getting samsung i9000.
btw thank you for your response.
Click to expand...
Click to collapse
ur welcome
Any update on this? I'm also experiencing this problem with my CM magnum running cm9.1.0 stable.
Maybe time to replace the screen digitizer >> http://tinyurl.com/bcv3ee8
Here's a guide to replace the entire lcd screen but that is not needed, and i guess if your replacing the digitizer you may as well clean out the front camera of dust
>> http://tinyurl.com/ad59v3m
I installed abens CM9 kernel which seemed to fix the problem somehow. And I've got a nexus 4 on the way so there's really no need for me to spend more on this unit. Thanks for the suggestion though.
Sent from my CSL-MI410 using xda app-developers app
Ressurection
I dunno if anybody's gonna reply as the phone is a lost legacy now
But I broke the touchscreen over a year ago... and I miss the phone... so gonna do a digitizer replacement
Is the Huawei Ideos X6 gonna be compatible with Spice CSL Mi410?? I know its the same phone... but there's a minor digitizer size difference i guess
Anybody who's done the ditizer replacement for this device??
And I also do remember having wierd touchscreen issues.... Has anybody tried a matte screen guard??
I think it might just work... as matte works good even with sweaty fingers
Entrana said:
I dunno if anybody's gonna reply as the phone is a lost legacy now
But I broke the touchscreen over a year ago... and I miss the phone... so gonna do a digitizer replacement
Is the Huawei Ideos X6 gonna be compatible with Spice CSL Mi410?? I know its the same phone... but there's a minor digitizer size difference i guess
Anybody who's done the ditizer replacement for this device??
And I also do remember having wierd touchscreen issues.... Has anybody tried a matte screen guard??
I think it might just work... as matte works good even with sweaty fingers
Click to expand...
Click to collapse
i think it'll work, cause ideos x6 and mi410 basicly same phone
i've experiencing weird touch issues when i use high current charger...
Charger Amperage?
adjidorporah said:
i think it'll work, cause ideos x6 and mi410 basicly same phone
i've experiencing weird touch issues when i use high current charger...
Click to expand...
Click to collapse
Hello brother... So happy to see that we people still visit our phone's forums...
Thanks for the advice
Anyways you made me take notes...
I never really thought that it could be a wrong charger issue..
Can you please kindly tell me of what amperage is the orginal charger???
You must know if you're using it...
Because i lost mine a while ago...
And i've been using any USB charger which comes in handy
Entrana said:
Hello brother... So happy to see that we people still visit our phone's forums...
Thanks for the advice
Anyways you made me take notes...
I never really thought that it could be a wrong charger issue..
Can you please kindly tell me of what amperage is the orginal charger???
You must know if you're using it...
Because i lost mine a while ago...
And i've been using any USB charger which comes in handy
Click to expand...
Click to collapse
mine is 5v-1.0A
original from axioo vigo 410 (which is same phone but with different brand)

Xperia X8 Display

So uum my X8 was recently dropped on the ground by accident and when i picked it up there were no scratches or anything thanks to my silicone mask. But when i try to turn it on it just vibrates and turns the backlight on and nothing else and shuts it self down. Nothing else.
The screen isn't cracked , everything seems to be OK inside when i opened it. but still just the vibration and back light nothing else. Help if you know what is wrong with it.
I'm not an expert, but maybe the reason is not the drop; have you unlocked bootloader or installed custom roms ?
Hyper- said:
I'm not an expert, but maybe the reason is not the drop; have you unlocked bootloader or installed custom roms ?
Click to expand...
Click to collapse
Yes
Ok, you can try to flash the original kernel and the original rom. It worked for me when i have had the same experience
Does not work...
Spevky said:
Does not work...
Click to expand...
Click to collapse
BUMP
are you using any a2sd or d2sd on your sdcard?
Sent from a katana with a sharpness over 9000!
yea that doesent matter
Well seems to be that my Display + Digitizer is down. But the backlight works. My X8 lasted 2 years.
lol mine is 3 years already
Sent from a katana with a sharpness over 9000!

Categories

Resources