Database Develop

[Q] how to activate the overclock in gingerdx v.028b

I have gingerdx v028b and i were installed the overclock for stock kernel in the gingerdx page but i cant use and i download setcpu but only let me down under 600 and will not let me raise your heeelp

Go to Settings>Cyanogenmod settings>perfromance
You will find it there

androidnerd2 said:
Go to Settings>Cyanogenmod settings>perfromance
You will find it there
Click to expand...
Click to collapse
not even let me download or upload only change the governor think it's called
Sent from my X8 using xda app-developers app

oops! sorry I didn't read carefully..you are on stock kernel..
GingerDX Overclock Module (x8oc.ko v004) give in the gdx thread should work for you..
I think you can't change the frequency of cpu
Sorry I don't know much about stock kernel
I think you should ask this question on GDx thread

1. Download DX's x8oc.ko (search for it)
2. Push the module in /system/lib/modules
3. Edit hw_config and add the following lines: insmod /system/lib/modules/x8oc.ko # x8oc.ko
4. Download a cpu manager app (i use setcpu)
5. Reboot.
Now run your cpu manager app, grant it root, and set you oc settings.
Sent from my X8 using xda premium

cascabel said:
1. Download DX's x8oc.ko (search for it)
2. Push the module in /system/lib/modules
3. Edit hw_config and add the following lines: insmod /system/lib/modules/x8oc.ko # x8oc.ko
4. Download a cpu manager app (i use setcpu)
5. Reboot.
Now run your cpu manager app, grant it root, and set you oc settings.
Sent from my X8 using xda premium
Click to expand...
Click to collapse
I served by
Sent from my X8 using xda app-developers app

optic-XPERIA said:
I have gingerdx v028b and i were installed the overclock for stock kernel in the gingerdx page but i cant use and i download setcpu but only let me down under 600 and will not let me raise your heeelp
Click to expand...
Click to collapse
Only flashing modules for stock in the post of GDX is the download link, along with the ROM
Do not forget to wipe Dalvik cache and cache partition

optic-XPERIA said:
I served by
Sent from my X8 using xda app-developers app
Click to expand...
Click to collapse
I don't get this. It didn't work for you?
Btw, i tried flashing the zip in gdx's thread and it didn't work. That's qhy i did it manually.
Sent from my X8 using xda premium

cascabel said:
I don't get this. It didn't work for you?
Btw, i tried flashing the zip in gdx's thread and it didn't work. That's qhy i did it manually.
Sent from my X8 using xda premium
Click to expand...
Click to collapse
yes yes XD I worked thanks. but i have another question, i can put on the scale over 800? as is advisable and in which governor? im sorry but my english is very bad
Sent from my X8 using xda app-developers app

optic-XPERIA said:
yes yes XD I worked thanks. but i have another question, i can put on the scale over 800? as is advisable and in which governor? im sorry but my english is very bad
Sent from my X8 using xda app-developers app
Click to expand...
Click to collapse
You can try. But DON'T tick "set on boot" immediately check if it's stable first. My phone crashes above 800 tho. But if yours doesn't then it's your choice.
Sent from my X8 using xda premium

just use freq 720+ and 800- below
it's stable

I normally use 748mhz, any higher my phone reboots after while or even straight away
Sent from my X8 using xda app-developers app

wich is the best governor?
Sent from my X8 using xda app-developers app

On demand
Sent from my X8 using xda app-developers app

hi guys
can anyone tell me how to do it manually?
the overclock module did not work after i flash it...

hatake1206 said:
can anyone tell me how to do it manually?
the overclock module did not work after i flash it...
Click to expand...
Click to collapse
are you on stock kernel?
Just because i don't doesn't mean i can't.

cascabel said:
are you on stock kernel?
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
yes im on stock kernel... i downloaded the update zip for stock oc on gingerdx thead but it doesn't work

hatake1206 said:
yes im on stock kernel... i downloaded the update zip for stock oc on gingerdx thead but it doesn't work
Click to expand...
Click to collapse
just dl the x8oc.ko module and push it to /system/lib/modules. then add "insmod /system/lib/modules/x8oc.ko" in hw_config and reboot.
Just because i don't doesn't mean i can't.

cascabel said:
just dl the x8oc.ko module and push it to /system/lib/modules. then add "insmod /system/lib/modules/x8oc.ko" in hw_config and reboot.
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
i have a little prob on that method T_T
im using ES file explorer and i cant push or copy the file on /system/libe/modules

hatake1206 said:
i have a little prob on that method T_T
im using ES file explorer and i cant push or copy the file on /system/libe/modules
Click to expand...
Click to collapse
try root explorer. there are some free apps on the market that would let you do that. the zip didn't work for me either. had to use that method to enable oc.
Just because i don't doesn't mean i can't.

[SPEEDUP] Tweak your ROM for Dummies

Ok. Erm, i have been causing disruptions here.. sorry. But from now on, all threads by me will be usefull. About CM10, Im putting it aside.
Now, this is a thread for dummies. Dont use if you wanna flame me that this is useless for newbies.
TWEAKING YOUR ROM.
========================
----------CONTENTS----------
1. Gingerbread ROMS
2. ICS ROMS
3. JB ROMS
4. Universal Tweaks
5. Requested
Gingerbread ROMs
What you'll need:
- A FULL Version of busybox (It dosent matter if its donate version or not.)
- Script Manager ( Play Store ) - mirror - http://db.tt/qLjcHj8S
- Some scripts (v6 Supercharger)(KickAss Kernelizer)( Dont rename them ) (Download from OP)
http://forum.xda-developers.com/showthread.php?t=991276&goto=newpost
And now, you can scroll down
GINGERBREAD ROMS
Open Busybox. Make sure it is installed. Please use v1.20>
Close Busybox.
Open Script Manager
Open v6 Supercharger ( make sure the skull icon, su, is in green. )
Run the script. When it prompts you of numbers, type 7 and enter.
Run it and then superclean and restart.(Manually=Open terminal emulator, type "su" then enter and then type "sclean" and enter. Reboot takes around 3mins. If it takes longer, pluck out your battery and put it back and switch it on.[SPEED IS NOW IMPROVED.]
NOW. FOR THOSE WHO ARE MUCH better in ROMS.
Re-Open v6 Supercharger after supercharging. Input the number for nitro lag nullifier. Run it and ignore the bootloop warning.
Following ROMS Tested with this (Please comment here if you have tested an unlisted ROM)
¤ CM7
¤ FOP CM9
¤ SUPRESSED ROM
¤ Shendu ROM
Now, your phone should be virtually lagless.
To tweak even more, Open script manager and open KickAss Kernelizer script with su in green. Once it prompts you to choose an option, Type "K" to KickAss. It will optimize your Kernel. Once it prompts you to have i/o scheduler tweaks, USE IT AT YOUR RISK. Once its done, reboot.
ROMS Tested compatible with i/o scheduler tweaks:
- Zues ROM
- CM7
- FOP CM9
Flashable Tweaks
- PIMP MY ROM
- thunderbolt!
===============================
Sent from my LG-P970 using xda premium

TWEAKING YOUR ROM.
========================
Ice Cream Sandwich
What you'll need:
- A FULL Version of busybox (It dosent matter if its donate version or not.)
- Script Manager ( Play Store ) - mirror - http://db.tt/qLjcHj8S
- Some scripts (v6 Supercharger)(KickAss Kernelizer)( Dont rename them )
http://db.tt/1z0jcVv6
http://db.tt/kODDMNLV
And now, you can scroll down
ICS ROMS
Open Busybox. Make sure it is installed. Please use v1.20>
Close Busybox.
Open Script Manager
Open v6 Supercharger ( make sure the skull icon, su, is in green. )
Run the script. When it prompts you of numbers, type 7 and enter.
Run it and then superclean and restart.(Manually=Open terminal emulator, type "su" then enter and then type "sclean" and enter. Reboot takes around 3mins. If it takes longer, pluck out your battery and put it back and switch it on.[SPEED IS NOW IMPROVED.]
NOW. FOR THOSE WHO ARE MUCH better in ROMS.
Re-Open v6 Supercharger after supercharging. Input the number for nitro lag nullifier. Run it and ignore the bootloop warning.
Following ROMS Tested with this (Please comment here if you have tested an unlisted ROM)
¤ CM7
¤ FOP CM9
¤ SUPRESSED ROM
¤ Shendu ROM
Now, your phone should be virtually lagless.
To tweak even more, Open script manager and open KickAss Kernelizer script with su in green. Once it prompts you to choose an option, Type "K" to KickAss. It will optimize your Kernel. Once it prompts you to have i/o scheduler tweaks, USE IT AT YOUR RISK. Once its done, reboot.
ROMS Tested compatible with i/o scheduler tweaks:
- Zues ROM
- CM7
- FOP CM9
*ADD ON ONLY FOR ICS*
Open up v6 Supercharger Scipt and input the number for ICS Service Centre. Install its services.jar and restart. Now your services run with lesser Memory!!!
Flashable Tweaks
- PIMP MY ROM
Jellybean
Flashable Tweaks
- PIMP MY ROM

UNIVERSAL TWEAKS
Tweaking in CWM
==================
REQUESTED
Sent from my LG-P970 using xda premium

CREDITS:
Me for the compilation
Zeppelinrox For Supercharger (http://forum.xda-developers.com/showthread.php?t=991276&goto=newpost)
Androguide.fr For PIMP MY ROM
Sent from my LG-P970 using xda premium

Don't forget the credits and always put the links to the original source and files, don't add mirrors for apks (Warez are against the rules) for apps you can get from play store, better add the links to them. And also add screens showing the steps.
Sent using xda app-developers app

re4lsk said:
Don't forget the credits and always put the links to the original source and files, don't add mirrors for apks (Warez are against the rules) for apps you can get from play store, better add the links to them. And also add screens showing the steps.
Sent using xda app-developers app
Click to expand...
Click to collapse
Dont worry. Its an ad version.
Sent from my LG-P970 using xda premium

When I type "sclean" in terminal emulator it says not found !

Navios92 said:
When I type "sclean" in terminal emulator it says not found !
Click to expand...
Click to collapse
Did you supercharge??
Sent from my LG-P970 using xda premium

SoulExertz said:
Did you supercharge??
Sent from my LG-P970 using xda premium
Click to expand...
Click to collapse
Yes
---------- Post added at 05:30 AM ---------- Previous post was at 05:28 AM ----------
What to do exactly after I type 7 and enter? What I did is that I waited for it to supercharge, closes SM and opened TE. Is this right?

Navios92 said:
Yes
---------- Post added at 05:30 AM ---------- Previous post was at 05:28 AM ----------
What to do exactly after I type 7 and enter? What I did is that I waited for it to supercharge, closes SM and opened TE. Is this right?
Click to expand...
Click to collapse
You could have used 32. Which is superclean and reboot.
Sent from my LG-P970 using xda premium

You putted CM10 aside? What a surprise.
Sent from my P-970 using xda app-developers app

wessyh0 said:
You putted CM10 aside? What a surprise.
Sent from my P-970 using xda app-developers app
Click to expand...
Click to collapse
Arh. His a douchebag. His my dorm mate. Total fail.
Sent from my LG-P970 using xda premium

wessyh0 said:
You putted CM10 aside? What a surprise.
Sent from my P-970 using xda app-developers app
Click to expand...
Click to collapse
Arh. His a douchebag. His my dorm mate. Total fail.
Sent from my LG-P970 using xda premium

I was using v8 and it didn't have this option. Downloaded v9 from second post (why didn't you put in first post ) and it worked.
You also forgot to mention that we should use SM to to run /data/99SuperCharger.sh at boot so that changes won't revert after restart.
Thanks for your guide
EDIT: For some reason changes revert after restart even when I set 99SuperCharger to run at boot !!

Navios92 said:
I was using v8 and it didn't have this option. Downloaded v9 from second post (why didn't you put in first post ) and it worked.
You also forgot to mention that we should use SM to to run /data/99SuperCharger.sh at boot so that changes won't revert after restart.
Thanks for your guide
EDIT: For some reason changes revert after restart even when I set 99SuperCharger to run at boot !!
Click to expand...
Click to collapse
He wont be online till i say so stopped him from any XDA im bringing him into Linux to stop his thank love.
Sent from my LG-P970 using xda premium

Mine is LG optimus black..Zeus ROM 6.39 version
After applying v6 supercharger tweaks...
Application titles and matters are missing ...no use even after rebooting.

sekhar13515 said:
Mine is LG optimus black..Zeus ROM 6.39 version
After applying v6 supercharger tweaks...
Application titles and matters are missing ...no use even after rebooting.
Click to expand...
Click to collapse
Then un supercharge. You could have done something wrong.
Sent from my LG-P970 using xda premium

how to check after rebooting if it all went right or it didn't supercharged ?
And I still have redraws in launcher

hemo-ali said:
how to check after rebooting if it all went right or it didn't supercharged ?
And I still have redraws in launcher
Click to expand...
Click to collapse
In terminal, type :'start super_service'
Remember to type 'su' before you type start super service
Sent from my LG-P970 using Tapatalk 2

I did and now

AOKP with ICZen won't hold CPU values

Just as it says... Vibrant with ICZen ... if I adjust the CPU values for max/min and governer and even with or without set at boot checked, the settings revert back to stock ... any ideas? I've reflashed 4x and fresh installed... same thing
Sent from my SGH-T959 using xda app-developers app

svavrek said:
Just as it says... Vibrant with ICZen ... if I adjust the CPU values for max/min and governer and even with or without set at boot checked, the settings revert back to stock ... any ideas? I've reflashed 4x and fresh installed... same thing
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
Look at the int.d files they may be over writing your settings at boot.
Vibrant 360° Productions

It would be more beneficial if you posted ICZ bugs in the forum where I actually host the rom, we have a ton of great minds over there that are more than willing to help.
That being said, what are you using to set the CPU values? If using the AOKP controls, yeah, they won't hold. Use NSTools, free from the market, and your values should stick.

svavrek said:
Just as it says... Vibrant with ICZen ... if I adjust the CPU values for max/min and governer and even with or without set at boot checked, the settings revert back to stock ... any ideas? I've reflashed 4x and fresh installed... same thing
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
you just got lucky J and B posted before me.. I would've ran you over for posting a question in the Dev Section.
Questions, where do they go? the Questions section *gasp*

[DEV]CM10 TweakPack

Hi.
This package adds Touch Boost and a multi-processor optimized zram to your CM10 Nightly. Maybe incompatible with older Nightlies or newer. (Currently running my own build - Should be identical with the Nightly from 09.11).
I flagged this stuff as DEV because it may leads to incompatible behaviour and maybe increase battery drain.
Please report (if it helps etc)
Download

cool, gonna try it

Thank u sir ! Does it helps with ril problems ?
Inviato dal mio LG-P990 con Tapatalk 2

Hi Benee ,
This is a good start for CM10 modifications.
I am currently trying to get iwconfig to work with Wifi TX power app.
Have you plans on compiling additional governors such as smartassv2 or lagfree for the O2X? Would be great as we now have the possibility to use governors...
Sent from my LG-P990 using xda app-developers app

Thank you benee!
Sent from my LG-P990 using xda app-developers app

der.einstein said:
Hi Benee ,
This is a good start for CM10 modifications.
I am currently trying to get iwconfig to work with Wifi TX power app.
Have you plans on compiling additional governors such as smartassv2 or lagfree for the O2X? Would be great as we now have the possibility to use governors...
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Nope. I'm not a fan of these voodoo magic governors. Most are ****ty, and bloated und just increase CPU overhead. Better save some cycles and use a simple one like ondemand.
I would suggest that you use interactive or ondemand. Both have Touch Boost support. Which really helps imho.

first of all thanks for sharing.
i'm using this with 26% of zRAM and interactive as cpu governor.
i don't see any particular difference for now, i will report better tomorrow after some daily use
can you add different i/o scheduler to this pack? like simple i/o, bfq, cfq, just to see if we can increase i/o speed.
EDIT: WiFi not working anymore It can't be enabled on 08/11 build.

After flashing the tweak pack my WiFi wont come on again.
I saw you put a wireless.ko inside the zip. Maybe something is wrong with it?
PS: I miss the conservative governor from stock CM10 already
Edit: I am also on nightly 1107
Sent from my LG-P990 using xda app-developers app

der.einstein said:
After flashing the tweak pack my WiFi wont come on again.
I saw you put a wireless.ko inside the zip. Maybe something is wrong with it?
PS: I miss the conservative governor from stock CM10 already
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
I was just gonna post this. Same issue here. I'm on the 1107 build.
Sent from my LG-P990 using xda app-developers app

xExabyte said:
I was just gonna post this. Same issue here. I'm on the 1107 build.
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Same but i'm on the 1108 build how to uninstall this tweak pack?

can someone please make a tweak pack which can un-restrict the RIL installation? in such case we can test nightlies with various bb and ril combinations and find our own solutions for many many reports of voice call issues.
How can we use getril working or manually place ril file in appropriate place?

Rom is really faster but wifi doesn't work, With 1103
Sent sometimes from my iPad, if working, using Tapatalk HD
---------- Post added at 09:06 PM ---------- Previous post was at 09:05 PM ----------
atheoran said:
Same but i'm on the 1108 build how to uninstall this tweak pack?
Click to expand...
Click to collapse
Re flash 1108
Sent sometimes from my iPad, if working, using Tapatalk HD

atheoran said:
Same but i'm on the 1108 build how to uninstall this tweak pack?
Click to expand...
Click to collapse
reflash the cm10 rom file, it will overwrite this kernel.

cmahendra said:
can someone please make a tweak pack which can un-restrict the RIL installation? in such case we can test nightlies with various bb and ril combinations and find our own solutions for many many reports of voice call issues.
How can we use getril working or manually place ril file in appropriate place?
Click to expand...
Click to collapse
Arcee told us not to change the RIL.
Sent from my LG-P990 using xda app-developers app

I think the kernel modules are in the wrong folder.
It should be /system/lib/modules instead of/system/modules shouldn't it?
Sent from my LG-P990 using xda app-developers app

I have modified the update ZIP with the correct path. You can flash it to get wifi working again.
However remove the modules from /system/modules

der.einstein said:
I have modified the update ZIP with the correct path. You can flash it to get wifi working again.
However remove the modules from /system/modules
Click to expand...
Click to collapse
A small error again it seems
This one I attached should work.
Thanks benee!
Will soon test and report.

ive tryed the fix pack by tonyp ics stock test rom
got no problems so far
tonyp rom seems to have better response after this tweak
Sent from my LG-P990 using xda premium

pidocchio said:
first of all thanks for sharing.
i'm using this with 26% of zRAM and interactive as cpu governor.
i don't see any particular difference for now, i will report better tomorrow after some daily use
can you add different i/o scheduler to this pack? like simple i/o, bfq, cfq, just to see if we can increase i/o speed.
EDIT: WiFi not working anymore It can't be enabled on 08/11 build.
Click to expand...
Click to collapse
To zram - DON'T touch the cm option. A script is included. To i/o scheduler. BFQ/CFQ are to complex imo. Noop is too simple. Deadline is the perfect mix (It's tweaked for flash storages). It's pretty cheap (cpu cycle) etc. So nope - not gona happen. However I think some other dev will start adding those stuff soon.
der.einstein said:
After flashing the tweak pack my WiFi wont come on again.
I saw you put a wireless.ko inside the zip. Maybe something is wrong with it?
PS: I miss the conservative governor from stock CM10 already
Edit: I am also on nightly 1107
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Could you please read the op? I'm doing this on a custom build: It's equivalent to the CM build tomorrow. So problems will occur This is why it's flagged as DEV. Currently there are big changes on daily basis. Not gona update this often, but on my Github you can find the source and add it to your own builds.

Benee said:
To zram - DON'T touch the cm option. A script is included. To i/o scheduler. BFQ/CFQ are to complex imo. Noop is too simple. Deadline is the perfect mix (It's tweaked for flash storages). It's pretty cheap (cpu cycle) etc. So nope - not gona happen. However I think some other dev will start adding those stuff soon.
Could you please read the op? I'm doing this on a custom build: It's equivalent to the CM build tomorrow. So problems will occur This is why it's flagged as DEV. Currently there are big changes on daily basis. Not gona update this often, but on my Github you can find the source and add it to your own builds.
Click to expand...
Click to collapse
I did not offend you in any way. I am sorry if you feel so. I just thought to help others fix wifi quick without the need to reflash whole ROM.
Sent from my LG-P990 using xda app-developers app

[KERNEL ICS][SCH-I705][2013-02-12] DoubleshotKernel v1.6 OC - Now at 1.70ghz!

Doubleshot Kernel v1.6
FIRST AND FOREMOST
**do this at your own risk**​
READ FIRST
If you DO NOT own a VERIZON Galaxy Tab 2 7.0 SCH-I705 then DO NOT flash this! If you have not verified and flash this on a p31xx tab, something will break and I will not help you!
Features
Built from Samsung kernel source
1.52ghz, 1.62ghz or 1.70ghz Overclock versions!
init.d support
ADB root
Custom bootanimation.zip support
Governors
Interactive, Conservative, Powersave, OnDemand, Performance
Requirements
A *VERIZON* GALAXY TAB 2 7.0 SCH-I705
Root
Unlocked bootloader
CWM Recovery
Install
1. BACKUP!
2. Wipe dalvik cache
3. Flash in CWM Recovery
4. Reboot
5. Hit the THANKS button!
*I recommend using "System Tuner" from the Play Store.
Download v1.6 - 1.70ghz
a7f86b0afe3544e08c47b8e9a7315d9d
Download v1.5 - 1.62ghz
7c61153896e37b21bf43d6b128d10084
Download v1.1- 1.51ghz
49e8ad6378fd3eed4536b36e925a0b1b
Thanks
Scrosler for init.d and ADB root
All the others who've made rooting and modding Android possible!
Source
https://github.com/MrHyde03/android_kernel_samsung_espressovzw.git

Change Log
v1.6 2013-02-12
1.70ghz OC!
v1.5 2012-12-21
1.62ghz OC!
v1.1 2012-12-16
Initial Release
1.51ghz OC!
To Come
I will be adding more governors in the coming weeks.

This kernel should works on jb stock rom ?
Thanks a lot
Enviado desde mi GT-P3110 usando Tapatalk 2

fash99 said:
this kernel should works on jb stock rom ?
Thanks a lot :d
enviado desde mi gt-p3110 usando tapatalk 2
Click to expand...
Click to collapse
sch-i705 only!!

MrHyde03 said:
Features
Built from Samsung kernel source
1.5ghz Overclock!
init.d support
ADB root
Custom bootanimation.zip support
Governors
Interactive, Conservative, Powersave, OnDemand, Performance
Click to expand...
Click to collapse
NICE!

I just got my Verizon Galaxy Tab 2 7.0 and it already comes with the J1 rom and not the G3. I don't see anywhere on how to root this version of the rom. The only instructions to root is for the G3 rom. Appreciate any help. Thanks.
Sent from my SCH-i705 using xda premium

Follow step 1b in the root thread. You have to downgrade to g3 and then upgrade to j1 after.
Sent from my SCH-I535 using xda app-developers app

Kernel source?

Yes, the source Samsung released on their open source website.
Sent from my SCH-I535 using xda app-developers app

1026 seems to be the lowest clock speed i can set

I can get to 384mhz, but I have noticed the minimun settings don't stick very well, but the maximum settings stick like glue. I've also noticed this on my S3. I'm not sure whats going on to be honest. I'll see if I can dig into it in the next few days. For now, though, I've noticed that you have to kinda play around with the minimum settings until it sticks, but it will stick eventually.

Working on cm 10.1?
Sent from my GT-P3110 using xda premium

MrHyde03 said:
Yes, the source Samsung released on their open source website.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Guess I should have been more specific. Where's the link to your kernel source? It's a requirement on XDA.

cmenard said:
Guess I should have been more specific. Where's the link to your kernel source? It's a requirement on XDA.
Click to expand...
Click to collapse
Ah. Gotcha. I'll see if I can post it up today. Github keeps rejecting my push and I haven't figured it out yet.

tdawgg777 said:
1026 seems to be the lowest clock speed i can set
Click to expand...
Click to collapse
I'm using Kernel Tuner right now and it's working the best. Can set both cores independently or together. One thing I've notice though is go into settings and check "Prevent Changes from other apps". It says it's for HTC but it's working on my tab. If anybody has a good reason to not do so let us know :good:

Hi thanks for your great kernel.
I have two tablet 7p and 10.1p wifi it is possible for you to explain me or port this great kernel to tablet 10.1 wifi
.
I have Linux pc and if you help me for port this or create my kernel with your help.
Because forum tab 10.1 is dead ...

MrHyde03 said:
I'm using Kernel Tuner right now and it's working the best. Can set both cores independently or together. One thing I've notice though is go into settings and check "Prevent Changes from other apps". It says it's for HTC but it's working on my tab. If anybody has a good reason to not do so let us know :good:
Click to expand...
Click to collapse
i'll give kernel tuner a try

worked great thanks..
Sent from my SCH-i705 using Xparent ICS Tapatalk 2

I'm trying to push my source to github, but I keep getting this error:
error: RPC failed; result=22, HTTP code = 413
fatal: The remote end hung up unexpectedly
fatal: The remote end hung up unexpectedly
If I change it to SSH I get a "permission denied (publickey)" error... anyone have some advice? I'd like to get this pushed out...

MrHyde03 said:
I'm trying to push my source to github, but I keep getting this error:
error: RPC failed; result=22, HTTP code = 413
fatal: The remote end hung up unexpectedly
fatal: The remote end hung up unexpectedly
If I change it to SSH I get a "permission denied (publickey)" error... anyone have some advice? I'd like to get this pushed out...
Click to expand...
Click to collapse
Bro.. 1.5 is plenty. Any more then that ur asking for problems
Sent from my SCH-I535 using Xparent Blue Tapatalk 2