Database Develop

[Q] Little help needed :) [FIXED] thanks :)

Hey guys.. it's me again..
With a little question..
i've searched for a solution and i found nothin unfortunately ..
Maybe it's me .. i don't know ..
Anywhore..
couple of months ago i unlocked the bootloader.. and i flashed A kernel ..
and did that over and over again.. last week .. i flashed Alfs.. i had some problems and bricks but i went through em easily thanks for Paul1989
But now.. i'm trying to flash nAa 08b ..
and unfortunately the flasher won't detect the phone ..
i know how to flash as i said before ..
i tried to do it on another laptop ... but nah ..
same problem ..
won't detect the phone ..
so i'm stuck at: connect the usb while holding the back button..
That's it ..
Hope u guys have some ideas ..
Thanks..
Cheers :
EDIT: i had a Problem with mounting the Phone to the pc.. but i solved it by installing the "Void" fix .. cause i have *alfs*
after that .. i could mount the phone..
so i thought now i can flash it ..
but .. NAH .. again .. it did NOT detect the phone :/

Plug your phone onto pc with battery out,hold the back button,then when youre holding it put the battery back in. Hope i helped
Sent from my GT-I5800 using xda premium

DeHuMaNiZeD said:
Plug your phone onto pc with battery out,hold the back button,then when youre holding it put the battery back in. Hope i helped
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse
i Did that couple of minutes ago ..
it Did not work out ..
What a failure

Hmm...i dont know...****...
Sent from my GT-I5800 using xda premium

nAa Kernel?
Well... let us try to diagnose the horse the other way around ...
When you connect the X8 in Flash Mode does Windows show the device as "SEMC Flash Device" in the Device Manager OR is it some "SEMC HSUSB Device" without a driver (yellow exclamation mark) OR isn't it recognized at all?
- If it's correctly recognized as SEMC Flash Device then Flashtool should be able to recognize the phone (assuming you're doing everything right).
- If it's mis-identified as "SEMC HSUSB Device" look around in the Forums - there's a modded Android driver that resolves this problem (this happens with one of the custom kernels ... I fail to remember if it happens with nAa or Alfs).
EDIT: Seems the misdetection only happens by chance with Alfs, but in case you experience that problem see this post.
- If it's not recognized at all ... check you're keeping the back button pressed while connecting the X8 to the PC until it's being recognized - check your USB cable - try another USB port - check your System for possible virii infections.

B.Jay said:
nAa Kernel?
Well... let us try to diagnose the horse the other way around ...
When you connect the X8 in Flash Mode does Windows show the device as "SEMC Flash Device" in the Device Manager OR is it some "SEMC HSUSB Device" without a driver (yellow exclamation mark) OR isn't it recognized at all?
- If it's correctly recognized as SEMC Flash Device then Flashtool should be able to recognize the phone (assuming you're doing everything right).
- If it's mis-identified as "SEMC HSUSB Device" look around in the Forums - there's a modded Android driver that resolves this problem (this happens with one of the custom kernels ... I fail to remember if it happens with nAa or Alfs).
EDIT: Seems the misdetection only happens by chance with Alfs, but in case you experience that problem see this post.
- If it's not recognized at all ... check you're keeping the back button pressed while connecting the X8 to the PC until it's being recognized - check your USB cable - try another USB port - check your System for possible virii infections.
Click to expand...
Click to collapse
B.jay
unfortunately .. it isn't recognized at all..
and believe me i'm 100% sure Im doing everything right ..
now i have downloaded the file u've given me ..
let's see the results
Thanks
EDIT: What am i supposed to do with that file??
i thought it's a driver i can install.. but apparently.. it isn't..
Thanks in advance..
EDIT2: I already have alfs .. and i want to install nAa ..
And i have a detection problem .. i never had before using alfs ..
i guess you know that already.. said that just to clarify ..

DeHuMaNiZeD said:
Hmm...i dont know...****...
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse
Lol.. it's alright

Sira. said:
Lol.. it's alright
Click to expand...
Click to collapse
Get the newes flashtool and reinstall flash drivers(They come bundled with flashtool)
It will work...worked for me.

yes ar .. flashtool

bogdan_mihai554 said:
Get the newes flashtool and reinstall flash drivers(They come bundled with flashtool)
It will work...worked for me.
Click to expand...
Click to collapse
And where can i find that flashtool?? there are plenty of flashtools in this Forum...
Am not gonna risk it, you know..
Link it up if u could
Thanks
EDIT: i have found the flashtools here http://forum.xda-developers.com/showthread.php?t=920746 ..
But how in the hell am i supposed to know which one is a proper flashtool for my x8??
EDIT2: Hold on a sec.. is that a flashtool???? It ends with FTF.. Not with EXE..
Damn am confused ..

linyaunam said:
yes ar .. flashtool
Click to expand...
Click to collapse
Wait.. What?

what do u see in the device manger ?
keep the device manager open when connecting the phone
and see if there is a blink (refreshing) in there - for detecting a new device
what do u see on the phone .. does it enter boot mode
if all is right on the phone side .. but still no response on the pc side (no new device yellow mark or blink) check your usb cable

amu_cpln said:
what do u see in the device manger ?
keep the device manager open when connecting the phone
and see if there is a blink (refreshing) in there - for detecting a new device
what do u see on the phone .. does it enter boot mode
if all is right on the phone side .. but still no response on the pc side (no new device yellow mark or blink) check your usb cable
Click to expand...
Click to collapse
What device manager?????
excuse me man .. but i never heard of that.. or maybe i did .. in another way???
Also, as i said.. i've tried another laptop.. The same thing happened..
Did NOT detect the phone..
and i have to tell you that the device LED lights up Green.. that's boot mode i guess
But i don't know what's the god damn problem..

Sira. said:
What device manager?????
excuse me man .. but i never heard of that.. or maybe i did .. in another way???
Click to expand...
Click to collapse
The device manager is a list of hardware devices connected to the PC (in Windows)
If you are using windows .. type devmgmt.msc in the run prompt and the device manager shall open
Sira. said:
What device manager?????
Also, as i said.. i've tried another laptop.. The same thing happened..
Did NOT detect the phone..
Click to expand...
Click to collapse
that what makes me doubt your USB cable .. do u have another cable .. or another phone to test if this cable is working well
Sira. said:
What device manager?????
and i have to tell you that the device LED lights up Green.. that's boot mode i guess
But i don't know what's the god damn problem..
Click to expand...
Click to collapse
It will show up on the phone screen when it enters bootloader

amu_cpln said:
The device manager is a list of hardware devices connected to the PC (in Windows)
If you are using windows .. type devmgmt.msc in the run prompt and the device manager shall open
that what makes me doubt your USB cable .. do u have another cable .. or another phone to test if this cable is working well
It will show up on the phone screen when it enters bootloader
Click to expand...
Click to collapse
Ooooohh that device manager ..
Alright .. okay
And yah i do have another USB cable .. i will test it right away ..
..
uhh okay .. sorry i missed up...
Wait for updates .. i will now test another USB cable

amu_cpln said:
The device manager is a list of hardware devices connected to the PC (in Windows)
If you are using windows .. type devmgmt.msc in the run prompt and the device manager shall open
that what makes me doubt your USB cable .. do u have another cable .. or another phone to test if this cable is working well
It will show up on the phone screen when it enters bootloader
Click to expand...
Click to collapse
Alright.. i have some updates ..
i brought another USB cable..
opened the device manager..
And connected the device in flash mode..
so i found in the SEMS USB FLASH .. has an explanation mark on it..
Alright okay .. i uninstalled it.. connected the phone again..
so it installs the drivers again..
then after like one second.. it tells me that the device was not installed...
I don't know why..
Then again..
With the SEMC USB FLASH with the explanation mark...
Duh..

flash with x10flashtool .. enter bootloader andtflash it
_____________________________________
Samsung Galaxy Ace
CM7 7.2 Deodexed
zimage kernel + v6 supercharger + turboboost

oktavianno said:
flash with x10flashtool .. enter bootloader andtflash it
_____________________________________
Samsung Galaxy Ace
CM7 7.2 Deodexed
zimage kernel + v6 supercharger + turboboost
Click to expand...
Click to collapse
Dude.. the flasher won't detect the phone..

Sira. said:
Alright.. i have some updates ..
i brought another USB cable..
opened the device manager..
And connected the device in flash mode..
so i found in the SEMS USB FLASH .. has an explanation mark on it..
Alright okay .. i uninstalled it.. connected the phone again..
so it installs the drivers again..
then after like one second.. it tells me that the device was not installed...
I don't know why..
Then again..
With the SEMC USB FLASH with the explanation mark...
Duh..
Click to expand...
Click to collapse
yes the exclamation mark says that you donot have proper drivers
search and install the latest drivers for your phone .. shouldnt have taht exclamation mark
the drivers should also come with your flash tool .. in the drivers folder ..
you can right click in device manager select update driver .. and point to teh drivers in your flashtool ..
if you dont have a copy .. search for new drivers elsewhere and install

Dude,how did you flashed the alfs kernel?
Sent from my E15i using Tapatalk

[Q] Phone not detected.

I flash my phne and i try to root my phone flashtool my phone is not detected by flashtool.
I try to install superclick on my pc ..It showing error.I tried in various Pc ..Can any one help me???????????????????????:crying:
Any other way is avalablle to make a root?????????????????????????
Thanks in advance........

PC Companion installed?

Chris95X8 said:
PC Companion installed?
Click to expand...
Click to collapse
Yep,,Pc companion installed Chris..........What i the need of PC companion here?????

PC Companion carries some drivers.

Chris95X8 said:
PC Companion carries some drivers.
Click to expand...
Click to collapse
Wat should i do now?
I installed that pc companion also...

maybe you forget to install all drivers dude!
gordon's gate, X8 driver, driver in the flashtool folder?

Try just connecting your phone once normally with p.c and pc companion then the drivers might get installed..
Sent by the walking walkkman

Ok i ll try dudes....!

Hey dude,
Go to C: drive where flashtool is installed.
Then go to driver folder n select appropriate phone driver.
Hit thank if this solves your problem.
Sent from my X8 using xda app-developers app

Vishal9890 said:
Hey dude,
Go to C: drive where flashtool is installed.
Then go to driver folder n select appropriate phone driver.
Hit thank if this solves your problem.
Sent from my X8 using xda app-developers app
Click to expand...
Click to collapse
I know that i install dtht driver also. but still phone not detected..!

silvergiri said:
I know that i install dtht driver also. but still phone not detected..!
Click to expand...
Click to collapse
copy paste your X8 drivers on C\Program files AND windows\system32\drivers

Just open up your flsh tool, don't do any thing on flash tool.. nw switch of you're phone and connect it in flash mod by holding the bake button and see if the drivers get installed..
Sent by the walking walkman..

Device Not Recognize

When i connected my mi410 to my lattop, the notification keep showing 'usb device not recognize'.
But, if i connected other set of mi410, the problem doesn't occured.
is it something happened to my phone?
is there any one could help?
P/S: i've already installed the correct usb driver on my lattop and it could recognize mi300 & other mi410.

tell me which are the roms you are using on each of your device ( on other mi410 too ) ???
also which OS on your laptop ????
don't forget to Hit Thanks bro

install SUT LR flashing tool.It have USB drivers of our phone packaged with the software.It will help you .

dude please uninstall drivers ... restart lappy and install again .... check if this work ...
also if possible provide more details like are you on stock ROM or any custom ...which OS is with your lappy and anything more if you want to share

ezio2 said:
tell me which are the roms you are using on each of your device ( on other mi410 too ) ???
also which OS on your laptop ????
don't forget to Hit Thanks bro
Click to expand...
Click to collapse
my mi410 is on Edowar CM7 latest update (27/3). the other 2 set i tried is on Sharp Rom & also Edowar CM7
My lattop is running Windows 7 Ultimate.

vivekb said:
dude please uninstall drivers ... restart lappy and install again .... check if this work ...
also if possible provide more details like are you on stock ROM or any custom ...which OS is with your lappy and anything more if you want to share
Click to expand...
Click to collapse
my mi410 is on Edowar CM7 latest update (27/3).
My lattop is running Windows 7 Ultimate.
i've already tried to unistall the drivers & reinstall for couple times. still same, and ONLY my device was not recognize.

Eric1665 said:
my mi410 is on Edowar CM7 latest update (27/3).
My lattop is running Windows 7 Ultimate.
i've already tried to unistall the drivers & reinstall for couple times. still same, and ONLY my device was not recognize.
Click to expand...
Click to collapse
seems to be a hardware problem with your cell maybe :cyclops:

ezio2 said:
seems to be a hardware problem with your cell maybe :cyclops:
Click to expand...
Click to collapse
what the.......argh..
is there anyway to solve it or flash back to stock rom?

Eric1665 said:
what the.......argh..
is there anyway to solve it or flash back to stock rom?
Click to expand...
Click to collapse
You can always use SUT LR 1.8.2 to flashback stock rom...
JUst put cell in Download mode using Vol UP + Power
open SUT from programs list
connect using usb cable ( while in Download Mode )
if it recognizes the phone Use Erase all User Data option
Hit Next button and wait for process to finish
it will take around 2 minutes..
Then you ll be on Stock os..
Hope i have helped you .. Don't forget to HIt Thanks

ezio2 said:
You can always use SUT LR 1.8.2 to flashback stock rom...
JUst put cell in Download mode using Vol UP + Power
open SUT from programs list
connect using usb cable ( while in Download Mode )
if it recognizes the phone Use Erase all User Data option
Hit Next button and wait for process to finish
it will take around 2 minutes..
Then you ll be on Stock os..
Hope i have helped you .. Don't forget to HIt Thanks
Click to expand...
Click to collapse
i've tried it for times. it doesnt work
the device is still not recognize.
i think i have to send it to the service centre..

Eric1665 said:
i've tried it for times. it doesnt work
the device is still not recognize.
i think i have to send it to the service centre..
Click to expand...
Click to collapse
Problem with your Windows / SUT installation...go to device manager and delete all device relevant USB controllers and other devices showing anything as "Qualcomm".
Uninstall SUT.
Restart windows, connect device and let it install the drivers first. Install SUT, install should go through without any issues and without prompting any error messages, in other words it should be complete uninterrupted install. Connect device and check if you see "a phone is connected"
Try with SUT 1.7 version also. Let us know if you still have any problems

x8 stucked on sony ericsson screenshot

x8 stucked on sony ericsson screenshot , trying to flash stock rom X8_E15_2.1.1.A.0.6_generic.ftf using flash tool 0.6.9.1 OS Windows 7 but flash tool showing (error - flashing abort)
Awaiting for suggestion.
Thanks

Usb cable lost conection! Its happen to me some times. Just again flash 2.1...... and hold back button to 4% then release it and dont move phone
Sent from my E15i using xda premium

Have u installed gordon gate drivers?
First connect phone then hold press back button untill green light show. Then check if windows recognized it.
Then remove battery.
Go to flash tool select the ftf u want to flash then wait until the dialog appear. Then connect phone (if u unplug before) insert battery hold press back till green light show, now it should be flash
Sent from my X8 using Tapatalk 2

supermiki said:
x8 stucked on sony ericsson screenshot , trying to flash stock rom X8_E15_2.1.1.A.0.6_generic.ftf using flash tool 0.6.9.1 OS Windows 7 but flash tool showing (error - flashing abort)
Awaiting for suggestion.
Thanks
Click to expand...
Click to collapse
sometimes its happen cz :
- drivers not installed correctly (x8 drivers and gordon)
- make sure your unlock BL process work successfully
- check all your hardware connection (cable, usb, etc)
don't forget to have > 60% battery

have you install the driver from /driver folder on the flashtool installed folder??
and dont forget to check the X8 ADB driver and fastboot / flashboot whatever LOL
just check that 2 thing and you shouldnt get any problem

Hey install the gorden gates driver provided with flastool and try again.....
Sent from my E15i using xda premium

Finally I've reflashed the rom but still after the pin code the phone does not hook any opertor and also no access to the applications menu

Reflashed with X8_E15_2.1.1.A.0.6_generic.ftf but the phone works only with no sim. E15i SI 1251-9820

supermiki said:
Reflashed with X8_E15_2.1.1.A.0.6_generic.ftf but the phone works only with no sim. E15i SI 1251-9820
Click to expand...
Click to collapse
dont forget put in your sim card to your phone while flash process dude ..

BlackRabbit1703 said:
dont forget put in your sim card to your phone while flash process dude ..
Click to expand...
Click to collapse
Flashed with sim in the phone

try flash again
this may happened sometimes

my pc can't detect my phone after to cyanogenmod

my pc can't detect my phone after flashing to cyanogenmod
http://forum.xda-developers.com/showthread.php?t=2199575

i had the same problem.. Seems to be a rom related bug :/
Cheers

Ot have to detec. But kies dont recognise im. Instead of that rom flash the one made bay olddroid.
Thanks if helped
Sent from my GT-S5830 using xda app-developers app

I'm thinking of just changing my rom, what do you guys think is a better rom?

if you install custom Rom , the kies will unable to detect your phone.. and in custom Rom u can also transfer file from phone to pc or pc to phone . j. when you connect ur phone just on the usb dubbing ..

Kies works only whit stock rom.
Sent from my GT-S5830 using xda premium

i know that kies can't detect custom rom phones, thanks for trying to help guys
what I'm trying to say is that, when I connect my phone to my pc ( usb debug enabled, everything enabled ) it just charges my phone and I don't hear a TATA! sound

rhie20 said:
i know that kies can't detect custom rom phones, thanks for trying to help guys
what I'm trying to say is that, when I connect my phone to my pc ( usb debug enabled, everything enabled ) it just charges my phone and I don't hear a TATA! sound
Click to expand...
Click to collapse
i used this thread to download the driver directly without installing keys
http://forum.xda-developers.com/showthread.php?t=1588304

You should use a 3er party app to your pc'll recognaize your phone as a massive storage, it could be to a rom bug that don't mount the usb storage