Database Develop

[HELP] stuck at bootscreen and full wipe doesn't work!

I am stuck in boot screen even after 5 full wipes!
I tried to uninstall chainfire 3D drivers and it rebooted and i have been stuck there for an hour now!
Anybody ho knows what to do?

Flash your ROM again..
sent from my x8 using xda premium

Thanks It Worked

ronnie-steelheart said:
Flash your ROM again..
Click to expand...
Click to collapse
it didn't work
I changed the rom
and again nothing
please help me
even pc companion says "no update for my device now try again later"

lionheart230 said:
it didn't work
I changed the rom
and again nothing
please help me
even pc companion says "no update for my device now try again later"
Click to expand...
Click to collapse
Try to press repair phone!
Sent from my E15i using xda premium

RomWiz said:
Try to press repair phone!
Click to expand...
Click to collapse
I did
but there is no update for my device
and I'm using the latest version of sony pc companion

lionheart230 said:
it didn't work
I changed the rom
and again nothing
please help me
even pc companion says "no update for my device now try again later"
Click to expand...
Click to collapse
What ROM did you flash??
sent from my x8 using xda premium

primehd and then
ginger dx

lionheart230 said:
primehd and then
ginger dx
Click to expand...
Click to collapse
Hmm. I don't know what the problem is. Well you could use flashtool to go back to stock but you'll have to root and do everything again..
sent from my x8 using xda premium

how can I do that?

lionheart230 said:
how can I do that?
Click to expand...
Click to collapse
Try this THREAD first.
If it doesn't work, you'll have to restore your X8 to it's original state. Follow these instructions STEP BY STEP:
- On your PC, uninstall Sony PC Companion
- Restart your PC
- Reinstall Sony PC Companion by downloading it from here
- Turn off the phone, and unplug it from the PC !
- Turn on Sony PC Companion on your PC
- In PC Companion, enter the Support Zone tab
- Go to Update Phone Software
A window will pop out, saying that it cannot find your phone
- Click on Fix Phone
- Click on Continue
A window will pop out, saying that you will lose all your data
- TICK the BOX
- Click on continue
An update process will began.
Wait for it to show a window with all the SONY mobile phones
- Find your phone (X8)
- Click on the phone.
Now all you have to do is follow the on-screen instructions. It will tell you to hold the back button and plug your turned-off X8 to the PC, then it will erase everything, and download the original 2.1 ROM to your X8.
If Sony PC Companion STILL doesn't recognize your X8, then, uninstall it AGAIN, and start the above described process AGAIN. It WILL eventually work!

lionheart230 said:
how can I do that?
Click to expand...
Click to collapse
You will have to download ftf file of stock ROM and flash it using flashtool..
sent from my x8 using xda premium

ronnie-steelheart said:
You will have to download ftf file of stock ROM and flash it using flashtool..
sent from my x8 using xda premium
Click to expand...
Click to collapse
This guide may help you..
http://forum.xda-developers.com/sho...TOOL GUIDE] HOW TO for n00bies - G-FACE GUIDE
sent from my x8 using xda premium

whatwhatinthebutt
thank you but I've tride that
and Like I said I got a small message window that says
"THERE IS NO UPDATE FOR MY DEVICE NOW"

Did you try flashing by Flashtool?
Sent from my X8 using Tapatalk

seach googe seus then install, choose xperia x8
follow the step

Urgent , My Phone stuck At SE White

i installed prime HD8 For Stock Kernel And after that it got stucked at SE lOGo i tried to fix it by x8toolbox but it doesn't recognize also pc companion what is the issue and how i can fix it

Yes, do you have seus?
Sent from my E15i using xda premium

And you can also go to recovery and do full wipe
Sent from my E15i using xda premium

When using "PCC" click on REPAIR PHONE
Or just use SEUS

my pc companion doesn't recognize my phone and also flashtool when i connect the cable tell me that usb debugging mode if off my phone is approximately dead . i need someone tell me what to do plllllz

Bootloader unlocked?
Sent from my E15i using xda premium

try download a firmware and flash using flashtools

not i don't unlock bootloader yet
and flashtools tell me phone connected but the debugging mode off

love_story99000 said:
not i don't unlock bootloader yet
and flashtools tell me phone connected but the debugging mode off
Click to expand...
Click to collapse
well, i also bricked my phone, started off again and unlocked my bootloader and everything went well.

okai my phone is almost died it's led flash green and show when battery is charged also open but stop in SE Logo And I need someone to help me plllllllllllz

follow my experience i connected my phone using seus its didnt show repair/reinstall icon,and me download a firmware and flash using flashtools and its working for me~

SAVE my XPERIA.....IS it dead???

this the problem with my xperia x8:
Help me please
I have a Brick Xperia X8, my Xperia Stuck on "Sony Ericsson" after I turn on my device. my Xperia has been rooted for GingerDX . i was already using GINGERDX V22. but when i tried to install GINGERDX V28 it got screwed up :crying: and my xperia stuck in "Sony Ericsson" after I do full wipe and format system(because i already done many install and uninstall application).
if I charge my xperia through original charger, it only stuck on "Sony Ericsson" and the LED not flame.
I have tried using SEUS, PCC and Flashtool, but my Xperia cannot response while connecting usb cable and press back button. the program keep requesting for connecting usb cable and press back button. but the LED green is on
The Big Problem is " My Xperia won't response after the program request for connecting usb cable and press back button" that command always like that, even I connect usb cable to my phone and press back button. either in SEUS, PCC, Flashtool even in S1toll.i have tried mutiple install/uninstall of USB drivers....nothing works.tried in both windows XP and Windows 7.i cant think my day without my x8
I have tried to use Reelock bootloader(S1tool), but my xperia could not response too. either I click Identity, Flash or Restore. I have tried Gordon's Gate to reset my usb port, but my computer always hang when I connected USB cable and press back button.
Please, what can I do to save my Xperia X8......when i'm connecting my x8 to pc via USB the green light is on. so i hope x8 is not fully dead:angel::angel:.
one more imp note i must mention: when i m connecting my phone in flash mode(i.e turn off x8...hold back button and plug in usb) phone is not detected....but strangely...when my x8 is stuck at 'sony ericssion' at dat time if i m connecting my phone to pc PCC pops up with message'x8 connected' but nothing happens after that...plz plzz plzz save my phone!!!!!!!this is my very first post in XDA:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
Help me Please...

stardd500 said:
this the problem with my xperia x8:
Help me please
I have a Brick Xperia X8, my Xperia Stuck on "Sony Ericsson" after I turn on my device. my Xperia has been rooted for GingerDX . i was already using GINGERDX V22. but when i tried to install GINGERDX V28 it got screwed up :crying: and my xperia stuck in "Sony Ericsson" after I do full wipe and format system(because i already done many install and uninstall application).
if I charge my xperia through original charger, it only stuck on "Sony Ericsson" and the LED not flame.
I have tried using SEUS, PCC and Flashtool, but my Xperia cannot response while connecting usb cable and press back button. the program keep requesting for connecting usb cable and press back button. but the LED green is on
The Big Problem is " My Xperia won't response after the program request for connecting usb cable and press back button" that command always like that, even I connect usb cable to my phone and press back button. either in SEUS, PCC, Flashtool even in S1toll.i have tried mutiple install/uninstall of USB drivers....nothing works.tried in both windows XP and Windows 7.i cant think my day without my x8
I have tried to use Reelock bootloader(S1tool), but my xperia could not response too. either I click Identity, Flash or Restore. I have tried Gordon's Gate to reset my usb port, but my computer always hang when I connected USB cable and press back button.
Please, what can I do to save my Xperia X8......when i'm connecting my x8 to pc via USB the green light is on. so i hope x8 is not fully dead:angel::angel:.
one more imp note i must mention: when i m connecting my phone in flash mode(i.e turn off x8...hold back button and plug in usb) phone is not detected....but strangely...when my x8 is stuck at 'sony ericssion' at dat time if i m connecting my phone to pc PCC pops up with message'x8 connected' but nothing happens after that...plz plzz plzz save my phone!!!!!!!this is my very first post in XDA:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
Help me Please...
Click to expand...
Click to collapse
some body please reply!!!!!!:crying:

Re-install the Rom and fullwipe.....and henceforth please dont format the system.
Hope i helped

athulele said:
Re-install the Rom and fullwipe.....and henceforth please dont format the system.
Hope i helped
Click to expand...
Click to collapse
not able to reinstall and full wipe
its not going to CWM or XRECOVERY...USB also not detecting in FLASH mode

I think you almost done everything EXCEPT changing your USB cable. Just give a try with replacing the USB cable.

mahesh1495 said:
I think you almost done everything EXCEPT changing your USB cable. Just give a try with replacing the USB cable.
Click to expand...
Click to collapse
bought dis cable just 3 months back.....and it was working fine till my X8 got bricked!!!!!!!!come on ...plz help

maybe you made your problem worst by locking bootloader etc. you have hard bricked it because you did so many things but seus?? did you try?

Use flashtool
Sent from my E15i using xda app-developers app

ngoralph said:
maybe you made your problem worst by locking bootloader etc. you have hard bricked it because you did so many things but seus?? did you try?
Click to expand...
Click to collapse
triwd SEUS,PCC,FLASHTOOL,S1tool.......none of these detects my phone

but does charging charge your phone?

Lukenda said:
Use flashtool
Sent from my E15i using xda app-developers app
Click to expand...
Click to collapse
flash tool is not detecting my x8...some issue with the driver..i tried installing/uninstalling drivers in pc...tried Gordon Gate drivers...nothing works....x8 still un detected...plz..read my forst post for more details.....i m very hopeful to get help from senior members here...plz:cyclops::cyclops:

Did you follow the step properly when using flashtool? i assume that you x8 isn't hardbricked because you can boot into se screen.
Send from my E15i using xda premium.
Press thanks if helped
*Xperia X8 Black @ ICS miniCM9 3.0.3 on nAa ICS 04 kernel *
Thank you very much nAa!

stardd500 said:
flash tool is not detecting my x8...some issue with the driver..i tried installing/uninstalling drivers in pc...tried Gordon Gate drivers...nothing works....x8 still un detected...plz..read my forst post for more details.....i m very hopeful to get help from senior members here...plz:cyclops::cyclops:
Click to expand...
Click to collapse
Did you try gordon gate in flashtool folder?
Send from my E15i using xda premium.
Press thanks if helped
*Xperia X8 Black @ ICS miniCM9 3.0.3 on nAa ICS 04 kernel *
Thank you very much nAa!

zlewe said:
Did you follow the step properly when using flashtool? i assume that you x8 isn't hardbricked because you can boot into se screen.
Send from my E15i using xda premium.
Press thanks if helped
*Xperia X8 Black @ ICS miniCM9 3.0.3 on nAa ICS 04 kernel *
Thank you very much nAa!
Click to expand...
Click to collapse
yes....followed every step properly....only issue x8 not detected while connecting the usb +holding back button. but green light id on at this time.
one more thing,....when i m chargiing my phone no green light is on and screen is stuck to Sony Ericssion screen.

try using flash tool again when it asked you to remove plug and replug it remove your battery and put it back way for 5 sec before plugging phone to pc check if led is there if not.....

stardd500 said:
yes....followed every step properly....only issue x8 not detected while connecting the usb +holding back button. but green light id on at this time.
one more thing,....when i m chargiing my phone no green light is on and screen is stuck to Sony Ericssion screen.
Click to expand...
Click to collapse
Is something showed on device manager when you try to connect in flashmode?
Maybe the problem its driver related. Also to make sure is not, try flashmode in another computer.
Sent from my GT-I9300 using xda premium

Alejandrissimo said:
Is something showed on device manager when you try to connect in flashmode?
Maybe the problem its driver related. Also to make sure is not, try flashmode in another computer.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
see the attachement from Devive manager win 7....
and i have used installing/uninstalling drivers + used gorndon gate driver also...but no good....any idea??

ngoralph said:
try using flash tool again when it asked you to remove plug and replug it remove your battery and put it back way for 5 sec before plugging phone to pc check if led is there if not.....
Click to expand...
Click to collapse
flash tool is not asking me to reconnect the x8 its showing the same damn plug in animation...but i tried disconnecting and reconnecting my phone while flash tool is on.....see the error message attached

You have PCC installed while using flashtool? And put flashtool in c:.
Sent from my X8 using xda premium

yeah dats what i mean. when the message shows up remove the battery and plug it in again make sure it is not turned on
Sent from my E15i using xda premium

Super Combo problem in my xperia x8.....

Well this is my first post here.
To be very short this is not a totally new problem. This is a combination of many problems that has made me totally helpless.
I had rooted my device using x8toolbox beta4, and installed a Gingerxperia V21 custom ROM.
After that i tried unlocking the bootloader, but flashtools continuously kept saying that my device was in MTP mode and strange enough there was no option in my phone's settings to change it.
So I went back to x8toolbox planning on installing the stock ROM back, when i saw busybox installer within.
I installed busybox 1.19.0 and then i asked x8toolbox to check the digitizer on my phone, AND THERE IT STARTED REBOOTING OVE AND OVER.
So now my phone can't connect to my pc for PCC repair or flashtools as MTP mode can't be switched off (and my phone won't turn on for the sd card to be read). And i am stuck with the Sony Ericsson Logo.
Please help me.....thanks in advance.

U have soft bricked your x8.
U can reset your x8 to original 2.1 with the help of following steps.
It's easy. Do it and rooted your phone again
forum.xda-developers.com/showthread.php?t=1570523
Officially corp via W8

Or just try Flashtool

i think your problem is flashing driver.. try to install on /flashtool/drivers/ the name of drivers is gordon gate.. but if your have a same problem after installed drivers, check your drivers on my computer/drivers.. or try for flashing on other computer..

leecorp said:
U have soft bricked your x8.
U can reset your x8 to original 2.1 with the help of following steps.
It's easy. Do it and rooted your phone again
forum.xda-developers.com/showthread.php?t=1570523
Officially corp via W8
Click to expand...
Click to collapse
Thanks for your answer..... But as I said my phone is still in MTP mode and doesn't seem to snap out of it. As i plug in my phone it turns on the green light and then starts rebooting as usual. Is it my driver 's issue? or is it just the mtp mode?? flashtool also says the same thing..:crying:

U cant keep it longer.
Open flashtool then select firmware and ok.
Wait till a screen appear.
Now connect ur phone by holiding back button.
Sent from my X8 using Tapatalk 2

bandarigoda123 said:
U cant keep it longer.
Open flashtool then select firmware and ok.
Wait till a screen appear.
Now connect ur phone by holiding back button.
Sent from my X8 using Tapatalk 2
Click to expand...
Click to collapse
But flashtools shows ERROR and flashing aborted and says that for 2011 line devices make sure your device is not in mtp mode....
Flashtools doesn't work that way....

Remember , wana unlock bootloader use stock rom to unlock. Do not use any install custom rom to unlock. Thing u have made a misstake.

kakho55 said:
Remember , wana unlock bootloader use stock rom to unlock. Do not use any install custom rom to unlock. Thing u have made a misstake.
Click to expand...
Click to collapse
So what to do now? Even if i can get my phone back can i unlock the bootloader (manufact. code: 11W33) ????
Help me plzz...

livinglegend9894 said:
So what to do now? Even if i can get my phone back can i unlock the bootloader (manufact. code: 11W33) ????
Help me plzz...
Click to expand...
Click to collapse
DONT UNLOCK!!!!!!!!!! HARD BRICK!
Sent from my E15i using xda premium

Don't try to unlock the Bootloader
If the error getting further, Re-install Windows.
It can't be, 3 weeks ago I had the same problem (MTP) .
I can't even install Apps via flashtool, so I try to connect to flashmode.
It works.
As I said try to Re-install windows.
Good Luck.

Please help to unbrick my xperia z

I am in an awkward situation.
xperia z, 4.2.2 244 rooted stock rom, bootloader locked, usb debug mode off, recovery not installed.
I accidentally corrupted build.prop and the phone bricked.
I cannot use flashtool to flash the stock rom back because usb debug mode is off.
I cannot use Sony update service Pro to force update because it said that "your phone already has the latest available software installed".
I cannot use PC Companion to repair because the software said that "Sony update engine doesn't have software available for your phone".
Please help.

wmiswm said:
I am in an awkward situation.
xperia z, 4.2.2 244 rooted stock rom, bootloader locked, usb debug mode off, recovery not installed.
I accidentally disrupted build.prop and the phone bricked.
I cannot use flashtool to flash the stock rom back because usb debug mode is off.
I cannot use Sony update service Pro to force update because it said that "your phone already has the latest available software installed".
I cannot use PC Companion to repair because the software said that "Sony update engine doesn't have software available for your phone".
Please help.
Click to expand...
Click to collapse
Use PC companion but try use repair phone not update. Wait till all phone model showing up than choose your model phone. btw, your phone must off.
than follow instruction there... wil take 1～2 hour for repair.
Hope you can solve your problem. ill take screen shoot when im home later than post here..
Sent from my C6602 using xda premium

YudiA1 said:
Use PC companion but try use repair phone not update. Wait till all phone model showing up than choose your model phone. btw, your phone must off.
than follow instruction there... wil take 1～2 hour for repair.
Hope you can solve your problem. ill take screen shoot when im home later than post here..
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
Thank you very much for your reply. But I am already using the PC Companion repair option, and the response is as stated above.

flashtool is all what you need,read the instructions
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium

Reply
wmiswm said:
I cannot use flashtool to flash the stock rom back because usb debug mode is off
Click to expand...
Click to collapse
You can use Flashtool to flash stock rom, doesn't matter if usb debug mode is on or off (only needed to install recovery or to root)
Download stock rom, install flashtool + drivers and follow screen instructions.. Good Luck! :good:

J have the same problem, yesterday j installed cyanogenmod, now xperia Z was on SONY logo and j can't flash original firmware on flashtool, j can only flash original kernel, but is still on sony logo
SUS says that hasn't new firmware for my phone.
What can j do ????
Thanks in advance

gm007 said:
flashtool is all what you need,read the instructions
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
many thanks, done.

shysparrow said:
You can use Flashtool to flash stock rom, doesn't matter if usb debug mode is on or off (only needed to install recovery or to root)
Download stock rom, install flashtool + drivers and follow screen instructions.. Good Luck! :good:
Click to expand...
Click to collapse
yes, you are right. Yesterday I check everything on the right panel and it does not work. Today I leave all option unchecked and flash properly. Many thanks anyway.

maxam73 said:
J have the same problem, yesterday j installed cyanogenmod, now xperia Z was on SONY logo and j can't flash original firmware on flashtool, j can only flash original kernel, but is still on sony logo
SUS says that hasn't new firmware for my phone.
What can j do ????
Thanks in advance
Click to expand...
Click to collapse
Just follow the flashtool instruction and re-flash the stock rom first, everything will return to unroot stated. Reroot then and try again.

wmiswm said:
Just follow the flashtool instruction and re-flash the stock rom first, everything will return to unroot stated. Reroot then and try again.
Click to expand...
Click to collapse
Maybe j have other kind of problem, j tried with flashtool but it doesn't start flashing when in flashmode, after a minute phone boots itself continuosly on sony logo.
j tried several times with different PC and different ftf file.
j hope to solve this problem, but how...

maxam73 said:
Maybe j have other kind of problem, j tried with flashtool but it doesn't start flashing when in flashmode, after a minute phone boots itself continuosly on sony logo.
j tried several times with different PC and different ftf file.
j hope to solve this problem, but how...
Click to expand...
Click to collapse
Try this way bro.. Done in many Xperia here..
Solving Bootloop phone/Flash Tool can't Detect your phone.
Your Phone Must Off!! and not connected !!
1. Open Pc Companion
2. Click update on Red ellipse (in Picture 1)
3. Start on Phone/tablet Update (in Picture 2)
4. Click Repair on Next Screen
5. in Next Screen, Read that warning Click Continue if you OK
6. Next Step click on Red Circle than Next...
7. Wait initializing Software (10~30 mnt) or depend your ISP speed
8. After initializin9 All Xperia Phone List Will Show Up.
Choose What Xperia Phone Will you repair ( I choose XZ) than Next..
9. Follow instruction On picture.
( Connect USB on your Phone while Press Vol down )
10. if not Start.. Unplug usb and try plug again ==> same no 9)
11. After start.. Waiting 1~2 Hours till done.
(Read Warning There )
Sent from my C6602 using xda premium

YudiA1 said:
Try this way bro.. Done in many Xperia here..
Solving Bootloop phone/Flash Tool can't Detect your phone.
Your Phone Must Off!! and not connected !!
1. Open Pc Companion
2. Click update on Red ellipse (in Picture 1)
3. Start on Phone/tablet Update (in Picture 2)
4. Click Repair on Next Screen
5. in Next Screen, Read that warning Click Continue if you OK
6. Next Step click on Red Circle than Next...
7. Wait initializing Software (10~30 mnt) or depend your ISP speed
8. After initializin9 All Xperia Phone List Will Show Up.
Choose What Xperia Phone Will you repair ( I choose XZ) than Next..
9. Follow instruction On picture.
( Connect USB on your Phone while Press Vol down )
10. if not Start.. Unplug usb and try plug again ==> same no 9)
11. After start.. Waiting 1~2 Hours till done.
(Read Warning There )
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
Solved...j know that phones must be off, the problem was flashtool, j used other version (beta 4) on other pc running xp instead of win7 and all goes good.
Thanks to all for helping me

Doesnt work.
I cant use flashtool, period.
Are there anyother methods?

theVenerable said:
Doesnt work.
I cant use flashtool, period.
Are there anyother methods?
Click to expand...
Click to collapse
The above didn't work for me because I received error based on my type of phone.
This guide however did help: http://forum.xda-developers.com/showthread.php?t=2240614
I had to reboot windows to a settings to enable unsigned drivers. Installed Flashtool and it's drivers,
First unlocked the bootloader(BLU button, got the IMEI, used the sony form (http://unlockbootloader.sonymobile.com/instructions))
Then I downloaded the stock sony xperia z ftf image, placed it in Flashtool's firmware folder, then flashed it (flash device > flash mode).
Now my phone's working again.
HTH,
George

brick,unbrick,xperia z problem,flashtool
My OS phone in recovery mode (root) got deleted And when I turn on phone stuck on Sony logo And when it is connected to the computer showing error your USB not recognized and Flash mode for use Flashtool doesn't work and the same error shows what should i do?

shayanster said:
My OS phone in recovery mode (root) got deleted And when I turn on phone stuck on Sony logo And when it is connected to the computer showing error your USB not recognized and Flash mode for use Flashtool doesn't work and the same error shows what should i do?
Click to expand...
Click to collapse
If you still can enter custom recovery, you only need flash rom and (with) suitable kernel.
If not, you need Flashtool.
- make sure you have the newest version of flashtool and driver
- connect your phone to pc.
- when computer show error about usb not recognized, go to computer management - device manager. Find something in universal serial bus controller list that have yellow triangle and exclamation mark. right click and remove it
- disconnect your phone then reboot your pc
- install flashtool and driver, reboot pc again
- connect your phone to pc. Now, it should detect your phone.
- do flashing procedure
cmiiw

visualfighter said:
If you still can enter custom recovery, you only need flash rom and (with) suitable kernel.
If not, you need Flashtool.
- make sure you have the newest version of flashtool and driver
- connect your phone to pc.
- when computer show error about usb not recognized, go to computer management - device manager. Find something in universal serial bus controller list that have yellow triangle and exclamation mark. right click and remove it
- disconnect your phone then reboot your pc
- install flashtool and driver, reboot pc again
- connect your phone to pc. Now, it should detect your phone.
- do flashing procedure
cmiiw
Click to expand...
Click to collapse
Thanks for the answer I tried all ways but the problem is not solved .I think the only solution is JTAG box

shayanster said:
Thanks for the answer I tried all ways but the problem is not solved .I think the only solution is JTAG box
Click to expand...
Click to collapse
To use Flashtool put phone in flashmode, it will not work in recovery mode
To put phone in flashmode
Hold power + both volume keys
wait till you feel three vibrations.
Make sure you have installed Z drivers flashmode drivers & fastboot drivers(Setup fille is in driver folder of flashtool)
Keep FTF file in firmware folder of flashtool
Start flashtool
Click the thunder button
select flashmode
select the FTF file
When it tells you to connect phone
Hold volume down key and connect USB it should start flashing

androidtweaker1 said:
To use Flashtool put phone in flashmode, it will not work in recovery mode
To put phone in flashmode
Hold power + both volume keys
wait till you feel three vibrations.
Make sure you have installed Z drivers flashmode drivers & fastboot drivers(Setup fille is in driver folder of flashtool)
Keep FTF file in firmware folder of flashtool
Start flashtool
Click the thunder button
select flashmode
select the FTF file
When it tells you to connect phone
Hold volume down key and connect USB it should start flashing
Click to expand...
Click to collapse
when it is connected into flashmode the computer showing error your USB not recognized

shayanster said:
when it is connected into flashmode the computer showing error your USB not recognized
Click to expand...
Click to collapse
Is it Windows 7 or 8?