i installed prime HD8 For Stock Kernel And after that it got stucked at SE lOGo i tried to fix it by x8toolbox but it doesn't recognize also pc companion what is the issue and how i can fix it
Yes, do you have seus?
Sent from my E15i using xda premium
And you can also go to recovery and do full wipe
Sent from my E15i using xda premium
When using "PCC" click on REPAIR PHONE
Or just use SEUS
my pc companion doesn't recognize my phone and also flashtool when i connect the cable tell me that usb debugging mode if off my phone is approximately dead . i need someone tell me what to do plllllz
Bootloader unlocked?
Sent from my E15i using xda premium
try download a firmware and flash using flashtools
not i don't unlock bootloader yet
and flashtools tell me phone connected but the debugging mode off
love_story99000 said:
not i don't unlock bootloader yet
and flashtools tell me phone connected but the debugging mode off
Click to expand...
Click to collapse
well, i also bricked my phone, started off again and unlocked my bootloader and everything went well.
okai my phone is almost died it's led flash green and show when battery is charged also open but stop in SE Logo And I need someone to help me plllllllllllz
follow my experience i connected my phone using seus its didnt show repair/reinstall icon,and me download a firmware and flash using flashtools and its working for me~
Related
I am stuck in boot screen even after 5 full wipes!
I tried to uninstall chainfire 3D drivers and it rebooted and i have been stuck there for an hour now!
Anybody ho knows what to do?
Flash your ROM again..
sent from my x8 using xda premium
Thanks It Worked
ronnie-steelheart said:
Flash your ROM again..
Click to expand...
Click to collapse
it didn't work
I changed the rom
and again nothing
please help me
even pc companion says "no update for my device now try again later"
lionheart230 said:
it didn't work
I changed the rom
and again nothing
please help me
even pc companion says "no update for my device now try again later"
Click to expand...
Click to collapse
Try to press repair phone!
Sent from my E15i using xda premium
RomWiz said:
Try to press repair phone!
Click to expand...
Click to collapse
I did
but there is no update for my device
and I'm using the latest version of sony pc companion
lionheart230 said:
it didn't work
I changed the rom
and again nothing
please help me
even pc companion says "no update for my device now try again later"
Click to expand...
Click to collapse
What ROM did you flash??
sent from my x8 using xda premium
primehd and then
ginger dx
lionheart230 said:
primehd and then
ginger dx
Click to expand...
Click to collapse
Hmm. I don't know what the problem is. Well you could use flashtool to go back to stock but you'll have to root and do everything again..
sent from my x8 using xda premium
how can I do that?
lionheart230 said:
how can I do that?
Click to expand...
Click to collapse
Try this THREAD first.
If it doesn't work, you'll have to restore your X8 to it's original state. Follow these instructions STEP BY STEP:
- On your PC, uninstall Sony PC Companion
- Restart your PC
- Reinstall Sony PC Companion by downloading it from here
- Turn off the phone, and unplug it from the PC !
- Turn on Sony PC Companion on your PC
- In PC Companion, enter the Support Zone tab
- Go to Update Phone Software
A window will pop out, saying that it cannot find your phone
- Click on Fix Phone
- Click on Continue
A window will pop out, saying that you will lose all your data
- TICK the BOX
- Click on continue
An update process will began.
Wait for it to show a window with all the SONY mobile phones
- Find your phone (X8)
- Click on the phone.
Now all you have to do is follow the on-screen instructions. It will tell you to hold the back button and plug your turned-off X8 to the PC, then it will erase everything, and download the original 2.1 ROM to your X8.
If Sony PC Companion STILL doesn't recognize your X8, then, uninstall it AGAIN, and start the above described process AGAIN. It WILL eventually work!
lionheart230 said:
how can I do that?
Click to expand...
Click to collapse
You will have to download ftf file of stock ROM and flash it using flashtool..
sent from my x8 using xda premium
ronnie-steelheart said:
You will have to download ftf file of stock ROM and flash it using flashtool..
sent from my x8 using xda premium
Click to expand...
Click to collapse
This guide may help you..
http://forum.xda-developers.com/sho...TOOL GUIDE] HOW TO for n00bies - G-FACE GUIDE
sent from my x8 using xda premium
whatwhatinthebutt
thank you but I've tride that
and Like I said I got a small message window that says
"THERE IS NO UPDATE FOR MY DEVICE NOW"
Did you try flashing by Flashtool?
Sent from my X8 using Tapatalk
seach googe seus then install, choose xperia x8
follow the step
this the problem with my xperia x8:
Help me please
I have a Brick Xperia X8, my Xperia Stuck on "Sony Ericsson" after I turn on my device. my Xperia has been rooted for GingerDX . i was already using GINGERDX V22. but when i tried to install GINGERDX V28 it got screwed up :crying: and my xperia stuck in "Sony Ericsson" after I do full wipe and format system(because i already done many install and uninstall application).
if I charge my xperia through original charger, it only stuck on "Sony Ericsson" and the LED not flame.
I have tried using SEUS, PCC and Flashtool, but my Xperia cannot response while connecting usb cable and press back button. the program keep requesting for connecting usb cable and press back button. but the LED green is on
The Big Problem is " My Xperia won't response after the program request for connecting usb cable and press back button" that command always like that, even I connect usb cable to my phone and press back button. either in SEUS, PCC, Flashtool even in S1toll.i have tried mutiple install/uninstall of USB drivers....nothing works.tried in both windows XP and Windows 7.i cant think my day without my x8
I have tried to use Reelock bootloader(S1tool), but my xperia could not response too. either I click Identity, Flash or Restore. I have tried Gordon's Gate to reset my usb port, but my computer always hang when I connected USB cable and press back button.
Please, what can I do to save my Xperia X8......when i'm connecting my x8 to pc via USB the green light is on. so i hope x8 is not fully dead:angel::angel:.
one more imp note i must mention: when i m connecting my phone in flash mode(i.e turn off x8...hold back button and plug in usb) phone is not detected....but strangely...when my x8 is stuck at 'sony ericssion' at dat time if i m connecting my phone to pc PCC pops up with message'x8 connected' but nothing happens after that...plz plzz plzz save my phone!!!!!!!this is my very first post in XDA:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
Help me Please...
stardd500 said:
this the problem with my xperia x8:
Help me please
I have a Brick Xperia X8, my Xperia Stuck on "Sony Ericsson" after I turn on my device. my Xperia has been rooted for GingerDX . i was already using GINGERDX V22. but when i tried to install GINGERDX V28 it got screwed up :crying: and my xperia stuck in "Sony Ericsson" after I do full wipe and format system(because i already done many install and uninstall application).
if I charge my xperia through original charger, it only stuck on "Sony Ericsson" and the LED not flame.
I have tried using SEUS, PCC and Flashtool, but my Xperia cannot response while connecting usb cable and press back button. the program keep requesting for connecting usb cable and press back button. but the LED green is on
The Big Problem is " My Xperia won't response after the program request for connecting usb cable and press back button" that command always like that, even I connect usb cable to my phone and press back button. either in SEUS, PCC, Flashtool even in S1toll.i have tried mutiple install/uninstall of USB drivers....nothing works.tried in both windows XP and Windows 7.i cant think my day without my x8
I have tried to use Reelock bootloader(S1tool), but my xperia could not response too. either I click Identity, Flash or Restore. I have tried Gordon's Gate to reset my usb port, but my computer always hang when I connected USB cable and press back button.
Please, what can I do to save my Xperia X8......when i'm connecting my x8 to pc via USB the green light is on. so i hope x8 is not fully dead:angel::angel:.
one more imp note i must mention: when i m connecting my phone in flash mode(i.e turn off x8...hold back button and plug in usb) phone is not detected....but strangely...when my x8 is stuck at 'sony ericssion' at dat time if i m connecting my phone to pc PCC pops up with message'x8 connected' but nothing happens after that...plz plzz plzz save my phone!!!!!!!this is my very first post in XDA:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
Help me Please...
Click to expand...
Click to collapse
some body please reply!!!!!!:crying:
Re-install the Rom and fullwipe.....and henceforth please dont format the system.
Hope i helped
athulele said:
Re-install the Rom and fullwipe.....and henceforth please dont format the system.
Hope i helped
Click to expand...
Click to collapse
not able to reinstall and full wipe
its not going to CWM or XRECOVERY...USB also not detecting in FLASH mode
I think you almost done everything EXCEPT changing your USB cable. Just give a try with replacing the USB cable.
mahesh1495 said:
I think you almost done everything EXCEPT changing your USB cable. Just give a try with replacing the USB cable.
Click to expand...
Click to collapse
bought dis cable just 3 months back.....and it was working fine till my X8 got bricked!!!!!!!!come on ...plz help
maybe you made your problem worst by locking bootloader etc. you have hard bricked it because you did so many things but seus?? did you try?
Use flashtool
Sent from my E15i using xda app-developers app
ngoralph said:
maybe you made your problem worst by locking bootloader etc. you have hard bricked it because you did so many things but seus?? did you try?
Click to expand...
Click to collapse
triwd SEUS,PCC,FLASHTOOL,S1tool.......none of these detects my phone
but does charging charge your phone?
Lukenda said:
Use flashtool
Sent from my E15i using xda app-developers app
Click to expand...
Click to collapse
flash tool is not detecting my x8...some issue with the driver..i tried installing/uninstalling drivers in pc...tried Gordon Gate drivers...nothing works....x8 still un detected...plz..read my forst post for more details.....i m very hopeful to get help from senior members here...plz:cyclops::cyclops:
Did you follow the step properly when using flashtool? i assume that you x8 isn't hardbricked because you can boot into se screen.
Send from my E15i using xda premium.
Press thanks if helped
*Xperia X8 Black @ ICS miniCM9 3.0.3 on nAa ICS 04 kernel *
Thank you very much nAa!
stardd500 said:
flash tool is not detecting my x8...some issue with the driver..i tried installing/uninstalling drivers in pc...tried Gordon Gate drivers...nothing works....x8 still un detected...plz..read my forst post for more details.....i m very hopeful to get help from senior members here...plz:cyclops::cyclops:
Click to expand...
Click to collapse
Did you try gordon gate in flashtool folder?
Send from my E15i using xda premium.
Press thanks if helped
*Xperia X8 Black @ ICS miniCM9 3.0.3 on nAa ICS 04 kernel *
Thank you very much nAa!
zlewe said:
Did you follow the step properly when using flashtool? i assume that you x8 isn't hardbricked because you can boot into se screen.
Send from my E15i using xda premium.
Press thanks if helped
*Xperia X8 Black @ ICS miniCM9 3.0.3 on nAa ICS 04 kernel *
Thank you very much nAa!
Click to expand...
Click to collapse
yes....followed every step properly....only issue x8 not detected while connecting the usb +holding back button. but green light id on at this time.
one more thing,....when i m chargiing my phone no green light is on and screen is stuck to Sony Ericssion screen.
try using flash tool again when it asked you to remove plug and replug it remove your battery and put it back way for 5 sec before plugging phone to pc check if led is there if not.....
stardd500 said:
yes....followed every step properly....only issue x8 not detected while connecting the usb +holding back button. but green light id on at this time.
one more thing,....when i m chargiing my phone no green light is on and screen is stuck to Sony Ericssion screen.
Click to expand...
Click to collapse
Is something showed on device manager when you try to connect in flashmode?
Maybe the problem its driver related. Also to make sure is not, try flashmode in another computer.
Sent from my GT-I9300 using xda premium
Alejandrissimo said:
Is something showed on device manager when you try to connect in flashmode?
Maybe the problem its driver related. Also to make sure is not, try flashmode in another computer.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
see the attachement from Devive manager win 7....
and i have used installing/uninstalling drivers + used gorndon gate driver also...but no good....any idea??
ngoralph said:
try using flash tool again when it asked you to remove plug and replug it remove your battery and put it back way for 5 sec before plugging phone to pc check if led is there if not.....
Click to expand...
Click to collapse
flash tool is not asking me to reconnect the x8 its showing the same damn plug in animation...but i tried disconnecting and reconnecting my phone while flash tool is on.....see the error message attached
You have PCC installed while using flashtool? And put flashtool in c:.
Sent from my X8 using xda premium
yeah dats what i mean. when the message shows up remove the battery and plug it in again make sure it is not turned on
Sent from my E15i using xda premium
x8 stucked on sony ericsson screenshot , trying to flash stock rom X8_E15_2.1.1.A.0.6_generic.ftf using flash tool 0.6.9.1 OS Windows 7 but flash tool showing (error - flashing abort)
Awaiting for suggestion.
Thanks
Usb cable lost conection! Its happen to me some times. Just again flash 2.1...... and hold back button to 4% then release it and dont move phone
Sent from my E15i using xda premium
Have u installed gordon gate drivers?
First connect phone then hold press back button untill green light show. Then check if windows recognized it.
Then remove battery.
Go to flash tool select the ftf u want to flash then wait until the dialog appear. Then connect phone (if u unplug before) insert battery hold press back till green light show, now it should be flash
Sent from my X8 using Tapatalk 2
supermiki said:
x8 stucked on sony ericsson screenshot , trying to flash stock rom X8_E15_2.1.1.A.0.6_generic.ftf using flash tool 0.6.9.1 OS Windows 7 but flash tool showing (error - flashing abort)
Awaiting for suggestion.
Thanks
Click to expand...
Click to collapse
sometimes its happen cz :
- drivers not installed correctly (x8 drivers and gordon)
- make sure your unlock BL process work successfully
- check all your hardware connection (cable, usb, etc)
don't forget to have > 60% battery
have you install the driver from /driver folder on the flashtool installed folder??
and dont forget to check the X8 ADB driver and fastboot / flashboot whatever LOL
just check that 2 thing and you shouldnt get any problem
Hey install the gorden gates driver provided with flastool and try again.....
Sent from my E15i using xda premium
Finally I've reflashed the rom but still after the pin code the phone does not hook any opertor and also no access to the applications menu
Reflashed with X8_E15_2.1.1.A.0.6_generic.ftf but the phone works only with no sim. E15i SI 1251-9820
supermiki said:
Reflashed with X8_E15_2.1.1.A.0.6_generic.ftf but the phone works only with no sim. E15i SI 1251-9820
Click to expand...
Click to collapse
dont forget put in your sim card to your phone while flash process dude ..
BlackRabbit1703 said:
dont forget put in your sim card to your phone while flash process dude ..
Click to expand...
Click to collapse
Flashed with sim in the phone
try flash again
this may happened sometimes
Well this is my first post here.
To be very short this is not a totally new problem. This is a combination of many problems that has made me totally helpless.
I had rooted my device using x8toolbox beta4, and installed a Gingerxperia V21 custom ROM.
After that i tried unlocking the bootloader, but flashtools continuously kept saying that my device was in MTP mode and strange enough there was no option in my phone's settings to change it.
So I went back to x8toolbox planning on installing the stock ROM back, when i saw busybox installer within.
I installed busybox 1.19.0 and then i asked x8toolbox to check the digitizer on my phone, AND THERE IT STARTED REBOOTING OVE AND OVER.
So now my phone can't connect to my pc for PCC repair or flashtools as MTP mode can't be switched off (and my phone won't turn on for the sd card to be read). And i am stuck with the Sony Ericsson Logo.
Please help me.....thanks in advance.
U have soft bricked your x8.
U can reset your x8 to original 2.1 with the help of following steps.
It's easy. Do it and rooted your phone again
forum.xda-developers.com/showthread.php?t=1570523
Officially corp via W8
Or just try Flashtool
i think your problem is flashing driver.. try to install on /flashtool/drivers/ the name of drivers is gordon gate.. but if your have a same problem after installed drivers, check your drivers on my computer/drivers.. or try for flashing on other computer..
leecorp said:
U have soft bricked your x8.
U can reset your x8 to original 2.1 with the help of following steps.
It's easy. Do it and rooted your phone again
forum.xda-developers.com/showthread.php?t=1570523
Officially corp via W8
Click to expand...
Click to collapse
Thanks for your answer..... But as I said my phone is still in MTP mode and doesn't seem to snap out of it. As i plug in my phone it turns on the green light and then starts rebooting as usual. Is it my driver 's issue? or is it just the mtp mode?? flashtool also says the same thing..:crying:
U cant keep it longer.
Open flashtool then select firmware and ok.
Wait till a screen appear.
Now connect ur phone by holiding back button.
Sent from my X8 using Tapatalk 2
bandarigoda123 said:
U cant keep it longer.
Open flashtool then select firmware and ok.
Wait till a screen appear.
Now connect ur phone by holiding back button.
Sent from my X8 using Tapatalk 2
Click to expand...
Click to collapse
But flashtools shows ERROR and flashing aborted and says that for 2011 line devices make sure your device is not in mtp mode....
Flashtools doesn't work that way....
Remember , wana unlock bootloader use stock rom to unlock. Do not use any install custom rom to unlock. Thing u have made a misstake.
kakho55 said:
Remember , wana unlock bootloader use stock rom to unlock. Do not use any install custom rom to unlock. Thing u have made a misstake.
Click to expand...
Click to collapse
So what to do now? Even if i can get my phone back can i unlock the bootloader (manufact. code: 11W33) ????
Help me plzz...
livinglegend9894 said:
So what to do now? Even if i can get my phone back can i unlock the bootloader (manufact. code: 11W33) ????
Help me plzz...
Click to expand...
Click to collapse
DONT UNLOCK!!!!!!!!!! HARD BRICK!
Sent from my E15i using xda premium
Don't try to unlock the Bootloader
If the error getting further, Re-install Windows.
It can't be, 3 weeks ago I had the same problem (MTP) .
I can't even install Apps via flashtool, so I try to connect to flashmode.
It works.
As I said try to Re-install windows.
Good Luck.
I have x8 locked bootloader with ginger dx v30 custrom, then i flash with ginger sony v1. My phone stuck at sony ericsson boot logo, im trying flash with flashtool but it say that 2011 phone should not connected in MTP mode. I think the usb debuging is off coz new flashing, but what i should i do coz from first time my phone stuck at boot logo. Maybe i forgot the instruction of ginger sony. Is anyone can help me please
Sent from my WT19i using xda app-developers app
auron.devil said:
I have x8 locked bootloader with ginger dx v30 custrom, then i flash with ginger sony v1. My phone stuck at sony ericsson boot logo, im trying flash with flashtool but it say that 2011 phone should not connected in MTP mode. I think the usb debuging is off coz new flashing, but what i should i do coz from first time my phone stuck at boot logo. Maybe i forgot the instruction of ginger sony. Is anyone can help me please
Sent from my WT19i using xda app-developers app
Click to expand...
Click to collapse
it detects your X8 as 2011 Xperia ? hmm maybe you can try Update Service to revive your phone if FT doesn't work.
I'll try by pc companion
Sent from my WT19i using xda app-developers app
At last my shakira working again via pc companion about 1 hour depending speed connection.
Sent from my WT19i using xda app-developers app
auron.devil said:
At last my shakira working again via pc companion about 1 hour depending speed connection.
Sent from my WT19i using xda app-developers app
Click to expand...
Click to collapse
as i always say, using Sony PC companion is the only best way to make our Sony phones back to basic.
as you say its really depends on Internet speed for me its take about 20 minutes.
i soft bricked my X8 about 5 times and use PC companion for 5 times.
That's what you're saying is not true for me
Sony Update Service is the best solution in this situation because you can see if you want to upgrade X8 phone must be switched on and turn debudowanie etc and install semc driver etc but the thing I had a problem with the pc companion could not detect my X8 and installed the Sony Xperia Pc companion X10 and X8 so I know 2 in 1 and the program required that I turned the phone and turned on debugging I think the free soft jokes when I fell
Sony Update Service without any figment updated my X8 and it worked as it should
if FlashTool not recognize your device, install the drivers for you device and try again restore with FlashTool
Sent from my E15a Sony Xperia x8 using xda premium