Hello
I'm very keen to install and try this ROM, but I'm having a strange issue. I flash Phil's kernel first, reboot recovery, wipe and install which all goes fine. When aroma install is complete and phone reboots I get the white Samsung screen for 30 seconds or so then phone seems to reboot itself, screen goes black briefly then Samsung logo reappears for a second and I get dumped back into Phil's CWM recovery.
I have checked MD5 of ROM download, no problem there. I've tried different versions of the install from aroma (lite version etc). Not really sure what I'm doing wrong. No one else in his thread has reported problems like mine. Anyone with ideas?
Sent from my GT-N7000 using xda app-developers app
try with hydracore kernel
Well turns out the md5 didn't match up. I had checked it after downloading and all was good, but something must have gone wrong on copying it over to my SD card. My fault. Up and running now though and it's a great ROM!
Sent from my GT-N7000 using xda app-developers app
nokiamodeln91 said:
try with hydracore kernel
Click to expand...
Click to collapse
Do NOT Flash hydracore on this ROM it is not compatible.
Sent from my GT-N7000 using Tapatalk 2
dude I meant to install the rom using hydracore not to install the rom and then hydracore
Ic
Sent from my GT-N7000 using Tapatalk 2
asf58967 said:
Ic
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
I have tried most of the JB leak roms.
ROCKET ROM JB has always worked for me.
sent from my Rocket ROM JB Note using XDA Premium
Hi everyone i've been using TheWisp's ROMS on my mini for quite some time now and i'm a big fan of his hard work:highfive::good: especially both cm9 and AOKP roms...So my problem is: i tried to update The Wisp's AOKP ICS Milestone 6-r2 zip with the latest base of his cm9 stable everything went fine until i flashed on my device for some reason that is still unknown my device got stuck while booting any help please get it to boot with success?:crying:
didn't you tried wiping data before and after flash
dheeraj (dhlalit11) said:
didn't you tried wiping data before and after flash
Click to expand...
Click to collapse
I wiped data before and after flash...so i don't know what seems to be the problem here
I think it might have something to do with how i updated the zip file
Take libandroidruntime and libandroid and libandroid_server from aokp
Sent from my GT-S5660 using xda app-developers app
Frankin96 said:
Take libandroidruntime and libandroid and libandroid_server from aokp
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
Ok so i've done what you said it's now booting with success but it's still cm9 instead of aokp i wanted to update aokp rom with the lastest cm9 source by TheWisp but it didn't worked:crying:
I don't know what i'm actually doing wrong here
Edit: I am on a GT-P7310
So I went from one of Safarikings stock roms to C-o-M's CM10.1 + icebolts latest 1.1.2.3 kernel.
I hit a boot loop.
I went into recovery, wiped literally everything, flashed CM10.1, Icebolt Kernel, and Gapps.... Now I am in a bootloop, just showing the boot animation to 10.1.
Any help to get my tablet working again? Going back to stock ICS and upgrading would be fine, or even getting CM10.1 to work from here would be awesome.
Thank you in advance.
Odin back to the stock rom. You can find it at sammobile.com
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
Odin back to the stock rom. You can find it at sammobile.com
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Yeah I just did, worked like a charm.
Guys i rooted my ICS stock room and over Cloclwok mod wanted to put 10.1 CM and i did it. The problem is when i do all u need to do to install Cm after that when phone boot i still have 4.0.4 stock rom. Someone know what to do?
Blinker7 said:
Guys i rooted my ICS stock room and over Cloclwok mod wanted to put 10.1 CM and i did it. The problem is when i do all u need to do to install Cm after that when phone boot i still have 4.0.4 stock rom. Someone know what to do?
Click to expand...
Click to collapse
Try CM10 on ICS bootloader or any
Other ICS roms..
Sent from my LG-P990 using xda app-developers app
Jishnu Sur said:
Try CM10 on ICS bootloader or any
Other ICS roms..
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
How to do that?
Are you using the recovery from Pengus
Read this thread the special recovery is required http://forum.xda-developers.com/showthread.php?t=2058231
Then this is my fav at the mo for 4.2.1 http://forum.xda-developers.com/showthread.php?t=2062573
Still quite buggy tho cm10 by pengus is currently perfect.
Blinker7 said:
How to do that?
Click to expand...
Click to collapse
Flash the special recovery. Then reboot recovery, flash the ROM.
Sent from my LG-P990 using xda app-developers app
Jishnu Sur said:
Flash the special recovery. Then reboot recovery, flash the ROM.
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Thanks, it worked
Hey, im a noob so heres my problem, ive experimented alot on my p1000 and one thing that bothers me alot was the video playback which was either choppy or laggy on CM so ive always restocked it back to GB. I think the solution for this is to use another kernel other than CwM. IS there any other kernels that i could try, the ones that could result in very good hd playback once im on a custom rom?
Sent from my GT-P1000 using xda app-developers app
First kernel and CWM are two different things CWM is one of the recovery mode.
For HD videos... You can use CM 10 or 9 or give AOKP SGT7 a try.... They are much stable...
Sent from Android
Ok so kernel and cwm are different i get it, but could you tell me how to install the heimdall kernel on p1000 step by step? Ive read from somewhere that it could improve hd video playback. And ive already used cm 9 stable and there is no cm 10 stable yet before but the problem persisted. . .
Sent from my GT-P1000 using xda app-developers app
Heimdall is a tool to flash ROM/kernel.
It is not a kernel. You read wrongly.
Find the same article and read again with the new understanding of what heimdall/kernel/cwm are, and see if you can make out what is that that was recommended.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Heimdall is a tool to flash ROM/kernel.
It is not a kernel. You read wrongly.
Find the same article and read again with the new understanding of what heimdall/kernel/cwm are, and see if you can make out what is that that was recommended.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Yes you're right, I kinda read wrong, the article said about the humberos, now that is a kernel right? I've installed it, and I realized that its a modified version of CwM but the real question is that do I have to keep using the firmware from humberos or could I use other custom roms like SGT7 aokp or Cyanogenmod?
It should be fine using it with other ROMs as long as both are from the same android version
Sent from my Galaxy Nexus using Tapatalk 2
Humberos is the guy's nickname. His ROM and kernel may also be referred to as Humberos.
But he made kernels back from Gingerbread days.
So we better know which one you flash.
You can use his kernel, for example his JB kernel in, in cm10 and aokp jellybean.
you can use his ICS kernel in AOKP ICS, CM9, and so on.
For CM10.1 it is yet a different kernel.
And it is not just different cwm, the kernel itself is different.
Sent from my GT-P1000 using xda app-developers app
Well ur explanation makes sense, I installed humberos and then humberos's cm 10.1 but the problem was with the camera so I decided to install aokp Sgt7 jb and then the aokp logo goes into boot loop. I then powered off, did the power + volume up and realised that I had installed the cyanogenmld cwm over the humberos. Now what to do?
Sent from my GT-P1000 using xda app-developers app
bisharat said:
Well ur explanation makes sense, I installed humberos and then humberos's cm 10.1 but the problem was with the camera so I decided to install aokp Sgt7 jb and then the aokp logo goes into boot loop. I then powered off, did the power + volume up and realised that I had installed the cyanogenmld cwm over the humberos. Now what to do?
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
That's because you installed 4.1.2 ROM with 4.2.1 kernel... It is better for you I'd you restock then update again... And please please please install the ROM with it's kernel because both of them are good AOKP or CM
Sent from my Galaxy Nexus using Tapatalk 2
Actually from the description, installing aokp sgt7 jb after running cm10.1 should not be an issue as long as you do the 3 wipes (cache, data, dalvik-cache).
aokp sgt7 will replace the cm10.1. But nevertheless, if it is still looping, do the restock.
They are all using CWM 6.x nowadays, it doesn't really matter, but the kernel has to be for the right ROM.
BTW, too many people think cm10.1 is just a little update from cm10.
It is not. It is a completely new framework. Treat it as a different ROM.
So all I gotta do is restock back to GB, root GB, install the humberos cm 10 kernel from SD after wiping everything, and then install aokp Sgt 7 or cm 10 right?
Sent from my GT-P1000 using xda app-developers app
http://forum.xda-developers.com/showthread.php?p=31433228
Follow this thread... Flash gb stock 5 safe... Then flash overcome kernel then flash the ROM you want...
Sent from my Galaxy Nexus using Tapatalk 2
salahmed said:
http://forum.xda-developers.com/showthread.php?p=31433228
Follow this thread... Flash gb stock 5 safe... Then flash overcome kernel then flash the ROM you want...
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Ok the instructions are well understandable but alotta files to download and a hell of lotta instruction manual to read. Its gonna take me a day to absorb all that and then start the "surgery" of my patient the p1000. Thanx again for the post though, will let u now through this post if any more queries. . .
Sent from my GT-P1000 using xda app-developers app
salahmed said:
http://forum.xda-developers.com/showthread.php?p=31433228
Follow this thread... Flash gb stock 5 safe... Then flash overcome kernel then flash the ROM you want...
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
ok well ive flashed the overcome kernel and then I flashed the overcome 4.1 aka the overcome experience and its actually quite fantastic. On my way to flash JB from CM. btw do I have to register the divx licenses? as well as other licenses?
ok im using overcome 4.1.0 and its fabulous. but before I go towards JB, can someone pls explain how to wipe the 3 caches using the overcome kernel, since its quite new to me? also when flashing to cm jb, do I have to clear the caches and then install from internal sd card? Is that how I upgrade it, not clean install it?
ok so I flashed aokp and the big problem is that it installs cwm over the overcome kernel and so the video problem still persists. Isnt there a way to remove the cwm recovery from the aokp rom?
You got it all wrong.
in P1000, recovery is included in the kernel.
Overcome kernel has cwm 5.0
Aokp kernel and cm kernel has cwm 6.0.
Wipe cache and wipe data are there in main menu of cwm.
Wipe dalvik cache is in Advanced menu.
You have overcome ROM 4.1, boot to cwm and flash aokp a few times until it is done, then flash gapps.
Reboot.
There is never a need to remove cwm. Where do you read such idea?
Sent from my GT-P1000 using xda app-developers app
priyana said:
You got it all wrong.
in P1000, recovery is included in the kernel.
Overcome kernel has cwm 5.0
Aokp kernel and cm kernel has cwm 6.0.
Wipe cache and wipe data are there in main menu of cwm.
Wipe dalvik cache is in Advanced menu.
You have overcome ROM 4.1, boot to cwm and flash aokp a few times until it is done, then flash gapps.
Reboot.
There is never a need to remove cwm. Where do you read such idea?
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
I didn't read it, I just thought about it. Anyhow, I flashed aokp a few times just like you said, and flashed gapps (obviously), but result is still the same. I'll post a video ASAP on the video playback performance that I'm still complaining about...
Video is a kernel/codec related problem.
It is not logical to link it to gapps or cwm.
Sent from my GT-P1000 using xda app-developers app
Ok so its a kernel/codec problem, what to do about it?
Sent from my GT-P1000 using xda app-developers app