Related
Hello everybody
I have used to flash old cm9 releases without any problems
But new releases starting from June enters a boot loop
I flashed stock with odoin and used a pit file and wiped everything and flashed cm9 and cm10 but again boot loop
n.b. aokp milestone 6 worked
I don't know where is the problem
Sent from my GT-P7300 using xda premium
zeema said:
Hello everybody
I have used to flash old cm9 releases without any problems
But new releases starting from June enters a boot loop
I flashed stock with odoin and used a pit file and wiped everything and flashed cm9 and cm10 but again boot loop
n.b. aokp milestone 6 worked
I don't know where is the problem
Sent from my GT-P7300 using xda premium
Click to expand...
Click to collapse
Are you also formatting /system before flashing?
Yes I also tried this
Sent from my GT-P7300 using xda premium
zeema said:
Yes I also tried this
Sent from my GT-P7300 using xda premium
Click to expand...
Click to collapse
After ODINing back to Stock, did you do a factory reset using the Stock Recovery? Yes, the one that makes you lose everything in the tablet including SDcard contents.
nirogu325 said:
After ODINing back to Stock, did you do a factory reset using the Stock Recovery? Yes, the one that makes you lose everything in the tablet including SDcard contents.
Click to expand...
Click to collapse
Yes I did
Sent from my GT-P7300 using xda premium
zeema said:
Yes I did
Sent from my GT-P7300 using xda premium
Click to expand...
Click to collapse
Are you using CWM Recovery v.6.0.0.0?
Actually I tried many versions starting with 5.1.0 and 5.5.0.4 and 6.0.0 I'dont where is the problem
Sent from my GT-P7300 using xda premium
i was having this problem with aokp ics so i back to 3.2 and wait for a new version of aokp ics and it is solved with the new version
so the rom solved it self
sorry for my english
mmostafanyw said:
i was having this problem with aokp ics so i back to 3.2 and wait for a new version of aokp ics and it is solved with the new version
so the rom solved it self
sorry for my english
Click to expand...
Click to collapse
Off-topic, but AOKP Milestone 6 will be the last ICS-based AOKP as evidenced here.
Again I successfully flashed the AOSP JB by safariking but it has some errors so I m back again to overcome 2.3.1
Sent from my GT-P7300 using xda premium
Still the same with every new cm10 releases
Kalte_kaffe should have look on this
Sent from my GT-P7300 using xda premium
This is an unofficial Jellybean 4.1.2 AOKP build for the T-Mobile Samsung Galaxy Note SGH-T879. Its compiled straight from aokp git sources with the only change being adding support for quincytmo kernel configs. Its extremely fast, smooth, and stable.
Installation Instructions:
1. Wipe data/factory reset
2. Flash Rom with twrp2
3. Flash Gapps
4. Profit!
What works:
Everything
What doesn't work:
You tell me.
Rom:
(Sorry, I don't have enough posts to link to the rom directly)
liam821.com/aokp/aokp_quincytmo_unofficial_Nov-01-12.zip
MD5 56b2189a90cfd1f51b1b41cc088b6b8e
Gapps:
goo.im/gapps/gapps-jb-20121011-signed.zip
Thanks:
aokp
cyanogenmod
And all the smart people here at xda and over at rootzwiki.
p.s. And it goes without saying, but I take no responsibility if you brick your phone, it catches fire, or your cat tries to eat it. So please, use at your own risk!
I flashed your ROM but didn't' boot..stuck on Samsung logo repeat and repeat...
Want to taste of your ROM ASAP...
Thanks..lol
Sent from my SAMSUNG-SGH-T879 using xda premium
kim621973 said:
I flashed your ROM but didn't' boot..stuck on Samsung logo repeat and repeat...
Want to taste of your ROM ASAP...
Thanks..lol
Sent from my SAMSUNG-SGH-T879 using xda premium
Click to expand...
Click to collapse
Did you install the ROM with twrp2? Also make sure you use the twrp2 for the T879, not the I717. If you use CWM you may have issues...
I used T-Mobile 879 tarp..not 717 or cw...
Will try reflash your ROM later a long..
I will let you know
Thank you for your response... lol.
Sent from my SGH-T879 using xda premium
I tried several times for different ways still stuck in boot...doesn't' work...
Sent from my SAMSUNG-SGH-I717 using xda premium
Clear cache, factory reset and see if that works
Sent from my SGH-T879 using xda app-developers app
Did anyone get this ROM to work and boot? I'd like to flash but use my note for work and can't afford downtime ATM. I use paranoid ATM but it has graphical glitches here and there.
Sent from my T-Mobile Samsung Galaxy Note SGH-T879
I did..
But doesn't work.
I have been trying to flash this ROM for different ways..still couldn't get it to working
.
Sent from my SAMSUNG-SGH-879using xda premium
It works after I flashed boot.IMG from my back up...but WiFi couldn't turn it on no reasons.
Anybody have an idea..
It is great a ROM other than WiFi.. thanks
Sent from my SAMSUNG-SGH-879using xda premium
misfitpierce said:
Did anyone get this ROM to work and boot? I'd like to flash but use my note for work and can't afford downtime ATM. I use paranoid ATM but it has graphical glitches here and there.
Sent from my T-Mobile Samsung Galaxy Note SGH-T879
Click to expand...
Click to collapse
I was also on paranoid's ROM before. As for Kim's comments I'm not sure as to why he couldnt get it to boot... My recommendation is to backup your current ROM, and give my AOKP a flash. Its easy to go back just recover with twrp2.
LMK what you find.
kim621973 said:
It works after I flashed boot.IMG from my back up...but WiFi couldn't turn it on no reasons.
Anybody have an idea..
It is great a ROM other than WiFi.. thanks
Sent from my SAMSUNG-SGH-879using xda premium
Click to expand...
Click to collapse
Sounds like you're s=on.
Here is the boot.img from this AOKP build - use this. It will fix your wifi issues.
liam821.com/aokp/boot.img
You can also find the boot.img inside the ROM zipfile.
So...
Do a factory wipe/wipe cache, flash the aokp rom, then install the boot.img with odlin after all that. It should boot then! LMK if it works out for you.
thanks!
liam
So I was finally able to install this.
I couldn't use the boot.img above with odin. odin would only take .tar files and I couldn't figure out how to convert it.
I kept getting the boot loop. What I ended up doing was. I installed the "ps_quincy' rom from another thread. Then I backed up only the boot file. I went back installed
this rom and restored only the boot file from the other Rom. I'm very new to this so there may be a easier way but its def worth the hassle i'm loving
this rom.
Saved for later
Sent from my SAMSUNG-SGH-I717 using xda premium
Got it figured out.. Good stuff here!!!
Thanks all! The 4.2 AOSP should be merged into the AOKP git soon so once thats all done I'll do a 4.2 AOKP build and get it posted here asap.
Is this rom working? no more bootloop? Wifi working fine?
Is this rom working? no more bootloop? Wifi working fine?
Samsung logo too...
No wifi calling in this rom
It's only comes with stock rom.
Not with jellybean.
Sent from my SGH-T879 using xda premium
Which jb rom is the most stable and smooth now?
Sent from my LG-P970 using xda premium
mmryeu said:
Which jb rom is the most stable and smooth now?
Sent from my LG-P970 using xda premium
Click to expand...
Click to collapse
CM10 latest nightly
sekhar13515 said:
CM10 latest nightly
Click to expand...
Click to collapse
@sekhar, what firmware are you using?? V20... ?
Aokp build 5 stable so far personal exp
Sent from my LG Optimus Black using xda premium
All jelly bean rom are not for daily use
Bad battery drain, sod, fc, BT not work correctly, etc
Im using akop build 5 jb rom n I dint face such prb which u mentioning below
Sent from my LG Optimus Black using xda premium
dare14 said:
Im using akop build 5 jb rom n I dint face such prb which u mentioning below
Sent from my LG Optimus Black using xda premium
Click to expand...
Click to collapse
CM10 (can't remember which nightly I used) doesn't have those problems either.
Apparently ShenduOS is also really good. I haven't had time to test it yet.
Mini Franki said:
All jelly bean rom are not for daily use
Bad battery drain, sod, fc, BT not work correctly, etc
Click to expand...
Click to collapse
you obviously dont know how to use the phone. latest cm10 nightly dont have that bugs, maybe the battery drain but it depends on how you use the phone but my experience with any gb roms specially stock is the same battery life with cm10, so everyone can use it now as a daily driver aside from you caveman who dont know how to use your ob.
xonar_ said:
CM10 (can't remember which nightly I used) doesn't have those problems either.
Apparently ShenduOS is also really good. I haven't had time to test it yet.
Click to expand...
Click to collapse
nightly from 20121111 or 20121114 have an exelent battery duration, the only issues that I had so far, is GPS takes around 10 minutos to lock a satelite, and the camera crashes every time you try to record a video, photos works great
Does som1 has the problem that the softkeys aren't working?? i did all 3 wipes but they still don't work
Can you guys please tell me what firmware (KDZ/AP+CP) you are using?? or is it a hardware issue??
When using CWM or CynMod7 (boype's) they respond great, but using cm10 they don't work at all (not responding, lights are on!)
I had the same issue and solved formating /system. I'm using RR JB v3.
Regards,
Sent from my GT-N7000 using xda premium
Darkwatch321 said:
@sekhar, what firmware are you using?? V20... ?
Click to expand...
Click to collapse
CM10 14th nightly..
for good results, do full wipe (3 wipes)
crmoreira said:
I had the same issue and solved formating /system. I'm using RR JB v3.
Regards,
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Just format system from CWM? and then reflash a stock rom and a cutom rom??
I think nightly 11.16. my daily rom
Darkwatch321 said:
Just format system from CWM? and then reflash a stock rom and a cutom rom??
Click to expand...
Click to collapse
Doesn't make much sense, if you flash a stock ROM you need to root first to flash a custom ROM and if you want a custom ROM why flash a stock ROM first?
Hey, im a noob so heres my problem, ive experimented alot on my p1000 and one thing that bothers me alot was the video playback which was either choppy or laggy on CM so ive always restocked it back to GB. I think the solution for this is to use another kernel other than CwM. IS there any other kernels that i could try, the ones that could result in very good hd playback once im on a custom rom?
Sent from my GT-P1000 using xda app-developers app
First kernel and CWM are two different things CWM is one of the recovery mode.
For HD videos... You can use CM 10 or 9 or give AOKP SGT7 a try.... They are much stable...
Sent from Android
Ok so kernel and cwm are different i get it, but could you tell me how to install the heimdall kernel on p1000 step by step? Ive read from somewhere that it could improve hd video playback. And ive already used cm 9 stable and there is no cm 10 stable yet before but the problem persisted. . .
Sent from my GT-P1000 using xda app-developers app
Heimdall is a tool to flash ROM/kernel.
It is not a kernel. You read wrongly.
Find the same article and read again with the new understanding of what heimdall/kernel/cwm are, and see if you can make out what is that that was recommended.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Heimdall is a tool to flash ROM/kernel.
It is not a kernel. You read wrongly.
Find the same article and read again with the new understanding of what heimdall/kernel/cwm are, and see if you can make out what is that that was recommended.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Yes you're right, I kinda read wrong, the article said about the humberos, now that is a kernel right? I've installed it, and I realized that its a modified version of CwM but the real question is that do I have to keep using the firmware from humberos or could I use other custom roms like SGT7 aokp or Cyanogenmod?
It should be fine using it with other ROMs as long as both are from the same android version
Sent from my Galaxy Nexus using Tapatalk 2
Humberos is the guy's nickname. His ROM and kernel may also be referred to as Humberos.
But he made kernels back from Gingerbread days.
So we better know which one you flash.
You can use his kernel, for example his JB kernel in, in cm10 and aokp jellybean.
you can use his ICS kernel in AOKP ICS, CM9, and so on.
For CM10.1 it is yet a different kernel.
And it is not just different cwm, the kernel itself is different.
Sent from my GT-P1000 using xda app-developers app
Well ur explanation makes sense, I installed humberos and then humberos's cm 10.1 but the problem was with the camera so I decided to install aokp Sgt7 jb and then the aokp logo goes into boot loop. I then powered off, did the power + volume up and realised that I had installed the cyanogenmld cwm over the humberos. Now what to do?
Sent from my GT-P1000 using xda app-developers app
bisharat said:
Well ur explanation makes sense, I installed humberos and then humberos's cm 10.1 but the problem was with the camera so I decided to install aokp Sgt7 jb and then the aokp logo goes into boot loop. I then powered off, did the power + volume up and realised that I had installed the cyanogenmld cwm over the humberos. Now what to do?
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
That's because you installed 4.1.2 ROM with 4.2.1 kernel... It is better for you I'd you restock then update again... And please please please install the ROM with it's kernel because both of them are good AOKP or CM
Sent from my Galaxy Nexus using Tapatalk 2
Actually from the description, installing aokp sgt7 jb after running cm10.1 should not be an issue as long as you do the 3 wipes (cache, data, dalvik-cache).
aokp sgt7 will replace the cm10.1. But nevertheless, if it is still looping, do the restock.
They are all using CWM 6.x nowadays, it doesn't really matter, but the kernel has to be for the right ROM.
BTW, too many people think cm10.1 is just a little update from cm10.
It is not. It is a completely new framework. Treat it as a different ROM.
So all I gotta do is restock back to GB, root GB, install the humberos cm 10 kernel from SD after wiping everything, and then install aokp Sgt 7 or cm 10 right?
Sent from my GT-P1000 using xda app-developers app
http://forum.xda-developers.com/showthread.php?p=31433228
Follow this thread... Flash gb stock 5 safe... Then flash overcome kernel then flash the ROM you want...
Sent from my Galaxy Nexus using Tapatalk 2
salahmed said:
http://forum.xda-developers.com/showthread.php?p=31433228
Follow this thread... Flash gb stock 5 safe... Then flash overcome kernel then flash the ROM you want...
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Ok the instructions are well understandable but alotta files to download and a hell of lotta instruction manual to read. Its gonna take me a day to absorb all that and then start the "surgery" of my patient the p1000. Thanx again for the post though, will let u now through this post if any more queries. . .
Sent from my GT-P1000 using xda app-developers app
salahmed said:
http://forum.xda-developers.com/showthread.php?p=31433228
Follow this thread... Flash gb stock 5 safe... Then flash overcome kernel then flash the ROM you want...
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
ok well ive flashed the overcome kernel and then I flashed the overcome 4.1 aka the overcome experience and its actually quite fantastic. On my way to flash JB from CM. btw do I have to register the divx licenses? as well as other licenses?
ok im using overcome 4.1.0 and its fabulous. but before I go towards JB, can someone pls explain how to wipe the 3 caches using the overcome kernel, since its quite new to me? also when flashing to cm jb, do I have to clear the caches and then install from internal sd card? Is that how I upgrade it, not clean install it?
ok so I flashed aokp and the big problem is that it installs cwm over the overcome kernel and so the video problem still persists. Isnt there a way to remove the cwm recovery from the aokp rom?
You got it all wrong.
in P1000, recovery is included in the kernel.
Overcome kernel has cwm 5.0
Aokp kernel and cm kernel has cwm 6.0.
Wipe cache and wipe data are there in main menu of cwm.
Wipe dalvik cache is in Advanced menu.
You have overcome ROM 4.1, boot to cwm and flash aokp a few times until it is done, then flash gapps.
Reboot.
There is never a need to remove cwm. Where do you read such idea?
Sent from my GT-P1000 using xda app-developers app
priyana said:
You got it all wrong.
in P1000, recovery is included in the kernel.
Overcome kernel has cwm 5.0
Aokp kernel and cm kernel has cwm 6.0.
Wipe cache and wipe data are there in main menu of cwm.
Wipe dalvik cache is in Advanced menu.
You have overcome ROM 4.1, boot to cwm and flash aokp a few times until it is done, then flash gapps.
Reboot.
There is never a need to remove cwm. Where do you read such idea?
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
I didn't read it, I just thought about it. Anyhow, I flashed aokp a few times just like you said, and flashed gapps (obviously), but result is still the same. I'll post a video ASAP on the video playback performance that I'm still complaining about...
Video is a kernel/codec related problem.
It is not logical to link it to gapps or cwm.
Sent from my GT-P1000 using xda app-developers app
Ok so its a kernel/codec problem, what to do about it?
Sent from my GT-P1000 using xda app-developers app
After successful flash to cm10.1 on samsung galaxy s i get camera fail,it just freezes then closes after message saying gallery fail.everything else runs sweet phone runs and looks 10 fold since running CM 10.1 stable,but the camera fails and i get message saying gallery fail then it closes, does anyone know how to fix? or if it can be.i am a noob but following the guides and a little research from XDA my galaxy s is like a new phone THANKS ALL FROM XDA!:good:
HI,
do you make a reboot after flashing???
Clean galerie apps cache ...and give a second chance...:good::fingers-crossed:
On my CM10.1.2 it works perfect ...
mistrp74 said:
After successful flash to cm10.1 on samsung galaxy s i get camera fail,it just freezes then closes after message saying gallery fail.everything else runs sweet phone runs and looks 10 fold since running CM 10.1 stable,but the camera fails and i get message saying gallery fail then it closes, does anyone know how to fix? or if it can be.i am a noob but following the guides and a little research from XDA my galaxy s is like a new phone THANKS ALL FROM XDA!:good:
Click to expand...
Click to collapse
Will try clearing gallery cache and get back thnx
Sent from my GT-I9000 using xda app-developers app
Tried clearing gallery cache now all I get is gallery has stopped then closes.
Sent from GT-19000 CM 10.1. stable
What kernel are you running? Is your cm latest? Update to latest version
Sent from my GT-I9000 using xda app-developers app
Sorry it took so long to get back have been away. Tried clearing gallery cache but still no camera. Kernel is 3.0.76-gc0a8d45 [email protected]#1
Sent from GT-19000 CM 10.1. stable
mistrp74 said:
Sorry it took so long to get back have been away. Tried clearing gallery cache but still no camera. Kernel is 3.0.76-gc0a8d45 [email protected]#1
Sent from GT-19000 CM 10.1. stable
Click to expand...
Click to collapse
Try updating your rom to the latest nightly there was a gallery problem in cm so that might fix it but before do a backup just in case.
Sent from my GT-I9000 using xda app-developers app
mistrp74 said:
Kernel is 3.0.76-gc0a8d45 [email protected]#1
Click to expand...
Click to collapse
Flash pawitp's last ROM nightly CM 10.2 it works fantastic in my i9000, no bugs at all. His kernel version is 3.0.86-g76a9412 and flash whole ROM with gapps, backup all your contacts, sms, calls before as it requires full wipe
Thanks everyone for your help,I might try a reflash with a different ROM,will let everyone one how it goes thnx
Sent from GT-19000 CM 10.1. stable
Do you want to flash an ewer Version of CM or a different ROM ???
mistrp74 said:
Thanks everyone for your help,I might try a reflash with a different ROM,will let everyone one how it goes thnx
Sent from GT-19000 CM 10.1. stable
Click to expand...
Click to collapse