Database Develop

Overocking for daily use?

Hi everyone, is it fine to use overclock for a daily use?
Sent from my X8

If its at a stable measurement. If you put it at a ridiculously high measurement for daily use then your phone will start rebooting on its own. 710mhz recommended

I cant find for 710mhz on alfs kernel
Sent from my X8

mikey000 said:
Hi everyone, is it fine to use overclock for a daily use?
Sent from my X8
Click to expand...
Click to collapse
overcloking = more speed = require more energy and will drain your battery faster. That's the consequence.
I feel the good of oc only on gaming.. phone, sms, etc not much difference

I wouldn't over kill it and personally would use a rom with a higher clock rather than a slider app. Seems to be more stable to me.
Edit:
I had my 855 running a 1ghz rom flawlessly. Even got about 10 hours out of it. Before that I used setcpu to 1ghz od and thought my phone was going to melt
Sent from my DROIDX using xda premium

Thanks for the feedback guys now i have something to consider
Sent from my X8 using xda premium

joe200 said:
overcloking = more speed = require more energy and will drain your battery faster. That's the consequence.
I feel the good of oc only on gaming.. phone, sms, etc not much difference
Click to expand...
Click to collapse
Found the answer for gaming only thanks
Sent from my X8 using xda premium

[Q] Overclocking ace with SetCPU?

i got freez on my phone every try i want to overclock it via setcpu,i currently using Grif CM rom,before overclock i flash the OC kernel named ketut,and then installed setCPU.First i was try to set max to 844mhz and min to 122mhz,if i goes up my phone starts to freez after few seconds...i was seen something on youtube that it could be run on 903 mhz even on 940mhz so what's the point?
and sry for the language....

What's the point ?
The point is that all CPUs are different like humans .
Like us people , some can withstand going faster while other cannot .
It's all down to how much the CPU can do
Herpderp Adreno + Tegra.

Yup. Listen to him.
Sent from my GT-S5830 using xda premium

point is u need to read a little bit more

You can try a rom based on stock instead of cm7 and try the cf-root OC kernel. Might be the same though.
Sent from my GT-S5830 using xda premium

Point is, buy a more powerfull phone with higher cpu....

pyronia said:
Point is, buy a more powerfull phone with higher cpu....
Click to expand...
Click to collapse
i have s2 now hehe

Going over 844 can cause damage to your CPU. I would recommend not doing so
Yes, people have taken it to 904 and then drained full battery in about half hour.
So, if you're so unhappy, buy a new phone

Kabir Saxena said:
Going over 844 can cause damage to your CPU. I would recommend not doing so
Yes, people have taken it to 904 and then drained full battery in about half hour.
So, if you're so unhappy, buy a new phone
Click to expand...
Click to collapse
Yes, i already bought samsung galaxy s2 its much much better!
Sent from my GT-I9100 running RR 3.1.3 using xda premium

[KERNEL]Boots for roms V20P "beast" 05/05/12

KERNEL-v2 FINAL BEAST
Only ROMS based P
ATT bands
original post http://www.htcspain.com/roms-lg-optimus-3d-384/kernels-bestia-2-final-acura2201-53297/
Acura2201
ADDED 4 NEW SPEED TO CORES KERNEL, NO MODULES NEEDED.
-100 MHz
-400 MHz
-1100 MHz
-1200 MHz
THESE WOULD BE ALL THE SPEED.
100
300
400
600
800
1008
1100
1200
1300
- THE new kernel.
Native band to Att.
Fixed WIFI reboots on some processors.
More speed in the first wifi connection.
Added more speed in the I / O
Repaired animations load the phone off (you do not know the gigs that I have taken this minutia)
Fixed consumption at all frequencies.
Added mine changes in CPU
Added changes in GPU.
Added hundreds of small changes in all the libraries ...
And a thousand things more
[kernel]Final Kernel Beast 2 ( 1,3) 04/05/12
http://min.us/mhAvaokSW
[kernel]Final Kernel Beast 2 ( 1,2) 04/05/12
http://min.us/mbiSQczDwP
Acura 2201
This is the kernel to save power.
Speed ​​is 1.3 and carries the termination LV referring to Low Voltage. Heh hehe me and my names.
If you have problems of fouling or Bluetooth does not work this kernel is not for you.
The voltages to the 800MHz band is very low. All for the low of 1.0.
And the maximum of 1,376 reduced to 1.35.
The GPU also has been lowered from 1.2 1.5
Telephone signal but also affect the power or signal reception. It is only during the call.
With these settings the battery increases the duration much. Without more testing time I can not give a figure, but in normal use can reach 15 hours without problems. That in mine never step 8. Very very lucky.
Now you tell me that this will go.
[kernel]Final Kernel Beast 2 (1.3) LV 04/05/12
This is the link.
http://min.us/mQRF0bdfB
[kernel]ABoot_1.9.7.4-V4 (1,3) Extreme-LV 05/05/12. new
http://minus.com/m2rn4NZL7/
BOOTS WUALA
DOWNLOAD http://www.wuala.com/jechus/THRILL V.20P/Bestia v20p/

Wish the links worked...
And so I have spoken it.. and so it shall be.

Link worked from my computer
Trekfan422991 said:
Wish the links worked...
And so I have spoken it.. and so it shall be.
Click to expand...
Click to collapse
The link didn't work for me from my phone. But It did work from my computer. So give your computer a try if you have that option. Looking forward to flashing a kernel on this phone..just got my thrill a few days ago and was surprised at how recently it received gingerbread..if indeed it actually did. I had to search high and low for the flash file and follow a hack on xda to install it.....loved every minute of it..lol

Trekfan422991 said:
Wish the links worked...
And so I have spoken it.. and so it shall be.
Click to expand...
Click to collapse
The links work, please download from pc

Just flashed the kernel. Seeing a big performance jump. The only thing I had to do was change the min clock speed to 300. Fantastic kernel!!!!
Sent from my LG-P925 using xda premium

min clock speed
DevanPe said:
Just flashed the kernel. Seeing a big performance jump. The only thing I had to do was change the min clock speed to 300. Fantastic kernel!!!!
Sent from my LG-P925 using xda premium
Click to expand...
Click to collapse
The 100 min clock speed has worked great for me..very low power draw at sleep and I know at least pandora continues to play fine when screen is tuned off. Have you had issues with it or just being safe?

Pandora works but tune in radio pro is a CPU hog and need like 800 but it works awesome to me I got just 1.3 may try the 1.3 lv later
sent from my acidhazard thrill

luv the hotplug
I love the hotplug gov. This phone is smooth as hell..I'm coming from an atrix that I had to give my wife as she didn't like the size and was scared by the 3d on this thrill. So im used to a fast phone and although it test out about the same as atrix it seems to run a lot smother and very glitch free. This hotplug gov seems to due a great job of controlling the cpu speed needed for battery life and functionality. Also rom toolbox works great for tweeking the memory and kernel settings among other things...awsome program I highly recommended it for this phone.

Bdadd34 said:
The 100 min clock speed has worked great for me..very low power draw at sleep and I know at least pandora continues to play fine when screen is tuned off. Have you had issues with it or just being safe?
Click to expand...
Click to collapse
It seemed to lag @ 100. Other than that it has been great so far
Sent from my LG-P925 using xda premium

updated new boot
ABoot_1.9.7.4-V4 (1,3) Extreme-LV. new
http://minus.com/m2rn4NZL7/

Wow great kernel. Thanks so much!

Can i flash this over thrill seeker rom??
Sent from my SAMSUNG-SGH-I717 using XDA

CXENTE said:
Can i flash this over thrill seeker rom??
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
yes it works on thrill seeker 2.1
Sent from my LG-P920 using xda premium

CXENTE said:
Can i flash this over thrill seeker rom??
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
This kernel is made ​​from recently released by LG V20P_925 thrill .... has to work perfectly.

Sweeet... Ill try it now
Sent from my SAMSUNG-SGH-I717 using XDA

CXENTE said:
Sweeet... Ill try it now
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
Heyyyy works greatt!!! Very smoothhh
Sent from my LG-P925 using XDA

Crackle Sound during Boot?
Is anyone else getting a crackle sound from the speaker during the book using this kernal?

loki2828 said:
Is anyone else getting a crackle sound from the speaker during the book using this kernal?
Click to expand...
Click to collapse
Yes, this happens to my phone with this Kernal too. It just last like a second though.

After installing the latest version im having gps lock issues i cant lock on to a gps signal at all anyone else havinv this issue i have thrill seeker 2.1 and it worked fine before the kernel
Sent from my LG-P925 using xda premium

When flashing this kernel on the thrill seeker 2.0 I noticed battery drained 10% within half an hour Do I need to download setcpu and put it on hotplug?

[Q] Best CPU settings for games in Apocalypse ROM?

Hey, all.
I am running the apocalypse ROM on my SGA.
While playing, i noticed that Jetpack Joyride lags a lot.
What will be the best CPU settings and governor for gaming?
Please let me know your opinion.
Also, I rarely over clock it beyond 844mhz, so is it a good idea to go beyond?
Thanks.
Peace out.

Kabir Saxena said:
Hey, all.
I am running the apocalypse ROM on my SGA.
While playing, i noticed that Jetpack Joyride lags a lot.
What will be the best CPU settings and governor for gaming?
Please let me know your opinion.
Also, I rarely over clock it beyond 844mhz, so is it a good idea to go beyond?
Thanks.
Peace out.
Click to expand...
Click to collapse
864 or even 883 is pretty stable for me

Maximum clock speeds vary with device..Impossible to give an exact figure or predict anything
I got transformed into a potato while writing this post..

limxyz said:
864 or even 883 is pretty stable for me
Click to expand...
Click to collapse
But doesn't that kill your battery?
Sent from my GT-S5830 using xda app-developers app

Prawesome said:
Maximum clock speeds vary with device..Impossible to give an exact figure or predict anything
I got transformed into a potato while writing this post..
Click to expand...
Click to collapse
I agree.
But I was just wondering which would be the best governor for gaming. Everyone may have different opinions.
Sent from my GT-S5830 using xda app-developers app

I have mine on 902mhz, always stable, very fast and very good for gaming, the best governor for gaming is either lagfree or performance.
Best of luck!
Sent from my GT-S5830 using xda premium

I've been wanting to OC that high, but I've been afraid of heat. You had any issues, notice it running hotter than normal?
Sent from my Galaxy Ace

GlaciaDDF said:
I have mine on 902mhz, always stable, very fast and very good for gaming, the best governor for gaming is either lagfree or performance.
Best of luck!
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Thanks.
But are you site you have no over heating issues?
And what is the minimum CPU frequency you set?
Sent from my GT-S5830 using xda app-developers app

Reply
well if you scared of crashes, heat and battery drain you can set maximum to 864mhz, minimum to 245 mhz and set governors to performance will be very stable and faster. it depends on your device. i found my ace oc to 902mhz is not stable for me, it crashes often and very hot, drains the battery about 1% 6-7 mins.

Rush6 said:
well if you scared of crashes, heat and battery drain you can set maximum to 864mhz, minimum to 245 mhz and set governors to performance will be very stable and faster. it depends on your device. i found my ace oc to 902mhz is not stable for me, it crashes often and very hot, drains the battery about 1% 6-7 mins.
Click to expand...
Click to collapse
Thanks.
I'll try it out
Sent from my GT-S5830 using xda app-developers app

Fastest, stable overclock Zeus v7.04

What is the fastest but stable overclock and undervolting for LG Optimus Black on Zeus v7.04?

logannz said:
What is the fastest but stable overclock and undervolting for LG Optimus Black on Zeus v7.04?
Click to expand...
Click to collapse
Fastest mean 1350 Mhz available in Zeus, but on safeside...1100 is preferrable of most users and is recommended.
In view of voltage (0) default is good.
InteractiveX is the latest and gives better battery backup..

logannz said:
What is the fastest but stable overclock and undervolting for LG Optimus Black on Zeus v7.04?
Click to expand...
Click to collapse
For me,Best overclock is 1300MHz(you can put 1350 if you'd like)governor is smartass v2 and i/o scheduler is deadline.That is good enough for gaming and other stuff.For undervolt,go as" under" as you want
Sent from my LG-P970 using xda app-developers app

After studying on all Sources, Undervolting renders little or no use to saving power. It also reduces your performance. Take note.
Sent from my LG-P970 using Tapatalk 2

I overclocked to 1350Mhz and my phone constantly restarted so I put it down to 1200Mhz and it seems to be fine for now
Sent from my LG-P970 using xda app-developers app

logannz said:
I overclocked to 1350Mhz and my phone constantly restarted so I put it down to 1200Mhz and it seems to be fine for now
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
You can't OC that much without pushing voltage up aswel.

What do you recommend changing the voltage to if I'm going to overclock to 1350Mhz?
Sent from my LG-P970 using xda app-developers app

logannz said:
What do you recommend changing the voltage to if I'm going to overclock to 1350Mhz?
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Push it up one unit at a time until it reaches a stable point (Just watch out for heat) . It's better to leave it at 1.2Ghz since I don't think you'll experience any lag at 1.2.

I put it up to 1350Mhz and voltage on the maximum of 5 and so far it's been really smooth without restarting. I'm not too worried about heat as my old Motorola Defy would get to about 60 degrees Celsius and I just played a couple of games and my phone is sitting around 30-40 degrees Celsius
Sent from my LG-P970 using xda app-developers app

logannz said:
I put it up to 1350Mhz and voltage on the maximum of 5 and so far it's been really smooth without restarting. I'm not too worried about heat as my old Motorola Defy would get to about 60 degrees Celsius and I just played a couple of games and my phone is sitting around 30-40 degrees Celsius
Click to expand...
Click to collapse
Why don't you take serious the BATTERY HEAT, it will cost life sometimes..