Related
My Samsung Captivate was working fine a day ago when I was transferring video off of it to my PC. Now this comes up and I'm like WTH lol. I've never dropped my captivate or damaged it( to my knowledge).
I have read in other posts that the only way to fix this is to replace the mini usb port inside of the phone... If that is true could someone direct me to a site that sells it?
Or is It a battery issue? because It now has a problem with showing the charging battery symbol when its not charging now...
I also thought about going to At&T and letting them tell me what they think, only thing i'm afraid of is that without me being able to flash back to Official 2.1 Eclair they wont help me...
Any suggestions guys?
Bump T_T............
lol, make it totally bricked, att will not see if the phone cannot turn on.
Have you tried switching computers? My laptop stopped reading my phone, but my desktop picked it up just fine.
Try factory reseting and flashing to a new rom
Sent from my GT-I9000 using XDA App
Well I would Flash it to stock, but how would I do that without the use of USB, because no computer can detect my phone as it is now.... the USB Port is damaged I believe.
As for Bricking it how can I do that because they told me I could replace it because I'm under warrenty, but they also told me that if its found out of warrenty that they may charge me upwards to 480 bucks for the replacement. The guy on the phone told me it only applied to cosmetic and liquid damage though, he didnt mention stuff like flashing the OS or modding.
This is strictly a Hardware Issue as it was working 2 days ago.
lol, you can easily brick your phone by doing the following:
1. download a rom;
2. go to recovery mode;
3. start flashing the rom and remove the battery during the process;
never help people like this ... i feel guilty ...
lol ikr? Never thought I'd ever ask that xD.
Can you plug your phone in to the wall charger and it charge. When you plug.it into.the PC are you getting a message about USB device not recognized. Are you using a.deshktop or a laptop what OS. If you are using a desktop are you using a port on the back preferrably the one closest to the motherboard. These are all things to take into account.
If when you plug it into the wall.or computer your phone will charge then most likely there is nothing wrong with your micro-usb on the phone. Instead its the computer. I had the same issue and had to fight with it for days but now it works everytime I plug [email protected]
Sent from my SAMSUNG-SGH-I897 using XDA App
I am using windows on my laptop and Fedora linux on my netbook and I have tried to connect all of them to it and it failed and they all had the latest drivers and my usb development and all that stuff is as it should be.
like i said in the OP it was working 2 days ago perfectly and I did nothing to change it or damaged it in any way ( to my knowledge) maybe the usb port got messed up when i tried to charge it but I can still get a charge but the battery keeps showing its charging even when it is off of the charger.
Izurin said:
I am using windows on my laptop and Fedora linux on my netbook and I have tried to connect all of them to it and it failed and they all had the latest drivers and my usb development and all that stuff is as it should be.
like i said in the OP it was working 2 days ago perfectly and I did nothing to change it or damaged it in any way ( to my knowledge) maybe the usb port got messed up when i tried to charge it but I can still get a charge but the battery keeps showing its charging even when it is off of the charger.
Click to expand...
Click to collapse
only way to really know is by flashing another rom... use your mobile browser not xda app, and go to xda, find a rom thread, and use the mobile browser to download the rom over 3g... reboot into recovery to install it, it will be in the download directory on your internal SD...
Well I would do that but Now I have another problem... it turned off and now it wont turn back on!!!! UGGGGGGGGGGGGGGH!!
Izurin said:
Well I would do that but Now I have another problem... it turned off and now it wont turn back on!!!! UGGGGGGGGGGGGGGH!!
Click to expand...
Click to collapse
anything from the charger? might bee good that it finally died... the att service center should swap it out for you now that its dead...
Well I thought I should Follow up on my Question... Somehow I got my Samsung Captivate to magically connect to my PC and believe me it was very Wonky. And Soon as my PC detected it I hurried and Downloaded Odin for Stock 2.1 and Put my Captivate in download mode using Cognition's Download mode option in the hold button popup on screen.
Long story short I was finally able to get my captivate back to 2.1 and the reported problem still exists... I'm calling ATT right now for my replacement that should be here in 2 days ^_^
Thanks Again to all the people here at xda for your help, I deeply appreciate it!
place dg cf7 on sd card via another phone or use an alternate browser to download it also get clockwork mod rec.zip and boot into recovery install from there, thats how I got back to stock after same problem as you,warranty phone.
worked for me
Hey everyone, First time poster here and it seems my captivate is bricked. I'm fairly new to android but I caught on with ROM/kernel/etc.. flashing and all seemed to be going well. I saw the new 3.5 update for precision and wanted to update from 3.0. I did my usual thing and restored to stock with ODIN instead of flashing over. Rooted all over again, downloaded ROM manager and flashed clockwork recovery. I selected the ROM when I was in CWrecovery and rebooted.. but for some reason the phone never gets past the boot screen. The ATT logo shows up, then the suckerpunch logo (as suckerpunch is included in the precision ROM) and then the precision logo.. but it just keeps starting over from there. I thought I did a clean flash but something went wrong obviously.
Ive tried the three button combo and anything that has been stated before on here about the three button combo timing and whatever. So it seems that I cant get in recovery or download by using the traditional methods.
I'm guessing my phone is soft-bricked, which should be relatively easy to fix, but I can't get into any mode at all. Ive seen plenty of threads with people having boot loop issues but they seem to have been solved my some combination of buttons used or the ODIN usb download mode technique. Ive seen mention of using adb commands to get into download mode, but I think I have to have usb debugging enabled which I can't enable, clearly.
Any help would be appreciated, especially since in the meantime I'll have to use my old 903sh.
CCDillon said:
Hey everyone, First time poster here and it seems my captivate is bricked. I'm fairly new to android but I caught on with ROM/kernel/etc.. flashing and all seemed to be going well. I saw the new 3.5 update for precision and wanted to update from 3.0. I did my usual thing and restored to stock with ODIN instead of flashing over. Rooted all over again, downloaded ROM manager and flashed clockwork recovery. I selected the ROM when I was in CWrecovery and rebooted.. but for some reason the phone never gets past the boot screen. The ATT logo shows up, then the suckerpunch logo (as suckerpunch is included in the precision ROM) and then the precision logo.. but it just keeps starting over from there. I thought I did a clean flash but something went wrong obviously.
Ive tried the three button combo and anything that has been stated before on here about the three button combo timing and whatever. So it seems that I cant get in recovery or download by using the traditional methods.
I'm guessing my phone is soft-bricked, which should be relatively easy to fix, but I can't get into any mode at all. Ive seen plenty of threads with people having boot loop issues but they seem to have been solved my some combination of buttons used or the ODIN usb download mode technique. Ive seen mention of using adb commands to get into download mode, but I think I have to have usb debugging enabled which I can't enable, clearly.
Any help would be appreciated, especially since in the meantime I'll have to use my old 903sh.
Click to expand...
Click to collapse
Can you describe exactly which three button methods have you performed? The one that always seems to work to get to download mode is hold both volume up and down and plug in USB cable to the computer and you should be able to get into download mode (of course after taking out the battery, shutting off your phone first). You should have ODIN open before this, then after that just press start on ODIN.
I believe people with captivates who have problems with 3 button combos have batch 1008. Please tell if you can't use the method above then we can check your batch.
koreancanuck said:
Can you describe exactly which three button methods have you performed? The one that always seems to work to get to download mode is hold both volume up and down and plug in USB cable to the computer and you should be able to get into download mode (of course after taking out the battery, shutting off your phone first). You should have ODIN open before this, then after that just press start on ODIN.
I believe people with captivates who have problems with 3 button combos have batch 1008. Please tell if you can't use the method above then we can check your batch.
Click to expand...
Click to collapse
I appreciate the fast response.
Ive tried the above method and it didn't work. Ive also tried plenty of others like holding the power button with the two volume buttons (to try recovery) Ive also held the buttons down for certain amounts of time to see if my timing is just off, and pretty much a few other generic three button combos that are performed when this sort of thing happens. Instead of getting into download mode, it of course just shows the battery charging.
If the phone is plugged in while it is doing its rebooting cycle then ODIN actually detects it, but I still wouldn't be able to do anything I'm sure.
Ive read through many posts about this but I just cant find anything to work at all, maybe buying a jig would be the final solution. :/
EDIT: If it helps, before flashing my captivate for the very first time a month back, i was told to check to see if I could enter into download mode and recovery safely, which I could and this was on stock rom. Ive been able to get into download/recovery with other ROMs as well, idk what's up now though
CCDillon said:
I appreciate the fast response.
Ive tried the above method and it didn't work. Ive also tried plenty of others like holding the power button with the two volume buttons (to try recovery) Ive also held the buttons down for certain amounts of time to see if my timing is just off, and pretty much a few other generic three button combos that are performed when this sort of thing happens. Instead of getting into download mode, it of course just shows the battery charging.
If the phone is plugged in while it is doing its rebooting cycle then ODIN actually detects it, but I still wouldn't be able to do anything I'm sure.
Ive read through many posts about this but I just cant find anything to work at all, maybe buying a jig would be the final solution. :/
EDIT: If it helps, before flashing my captivate for the very first time a month back, i was told to check to see if I could enter into download mode and recovery safely, which I could and this was on stock rom. Ive been able to get into download/recovery with other ROMs as well, idk what's up now though
Click to expand...
Click to collapse
If you could get into download before, I don't know why you wouldn't be able to do it now. The fact that you can see the battery charging icon indicates that you should easily be able to get into download mode. Can you double check your methods and if neither work, you could always go for JIG.
you may need to buy this to get into download mode:
http://cgi.ebay.com/ws/eBayISAPI.dl...69977&ssPageName=STRK:MESELX:IT#ht_623wt_1139
just to clearify and add one more thing to try...
you are experiencing a boot-loop not brick..
ive heard of boot loop problems sometimes getting into download mode by:
remove battery
plug in usb
hold volume buttons
put in battery
(slight change on usual method)
EDIT: you may also want to try the AIO captivate toolbox in the Dev section, it can try to put your phone into download mode
I had this happen before. I did what Tresselo said and it worked.
Sent from my SAMSUNG-SGH-I897 using XDA App
plug in your usb cable. let the phone reboot and see if the comp recognizes the phone at any point during your boot loop. if it does - your in luck, sort of... I had this problem as well with the same ROM. idk if its the ROM or just me screwing up (probably me screwing up) anyhow, type this command into a command prompt (must have the android sdk and adb installed) get into the tools folder where ever that may be at for me its C:\android\tools
from this dir type this: adb reboot download - do this as soon as the comp recognizes your phone - should work.... IF the comp is seeing the phone. If its not you WILL need a JIG which can be made fairly easy.
Try adb if you haven't already. Instructions are in the stickies in the Dev section.
Sent from my Captivate using XDA App
Thanks for all the replies guys, got a good community here. Sadly no suggestions have worked at all.
jgc121 said:
plug in your usb cable. let the phone reboot and see if the comp recognizes the phone at any point during your boot loop. if it does - your in luck, sort of... I had this problem as well with the same ROM. idk if its the ROM or just me screwing up (probably me screwing up) anyhow, type this command into a command prompt (must have the android sdk and adb installed) get into the tools folder where ever that may be at for me its C:\android\tools
from this dir type this: adb reboot download - do this as soon as the comp recognizes your phone - should work.... IF the comp is seeing the phone. If its not you WILL need a JIG which can be made fairly easy.
Click to expand...
Click to collapse
I downloaded the android SDK and installed all the necessary components, as soon as I hit the right directory (for me C:\Program Files\Android\android-sdk-windows\platform-tools>adb reboot download) and I get "error: device not found". So adb seems to be running right and I may just have to get my timing right, but as of trying a good ten times I'm not having any luck.
When booting up my cap while plugged into the computer, the noise that signals a usb connection sounds and when going into device manager and looking at usb connections, its says samsung android device. Seems like I could get into download, but I guess I'll just keep trying to time it exactly right even though Ive hit the command near the connection noise every time.
I'm not losing hope, but I went ahead and ordered the jig off of ebay that mengbo posted, I'm really hoping that the jig could solve my problem for good. From your perspective guys, would the jig DEFINITELY work? Or is it just a kinda one shot, hope for the best thing?
The JIG is a pretty sure thing seeing as how you are just in a boot loop.
CCDillon, Im in the same boat as you. Same thing happened to me. I have tried a jig and it did not work for me. Hopefully it works for you. I have tried ADB also and it could not find the device. I really hope there is something out there that can help us.
aw man, that's not good at all.. hope you can find a way. Did you make a jig and were you using the same ROM?
Hopefully its just mine and the jig works for you. I didnt mean to scare you. I made a jig at first, and it kept booting the phone. Thought I didnt make it correctly so I got one off of ebay, thinking it had to work. That one did the same thing. Thought maybe it was a faulty jig and the guy I got it from ('mengbo' on this forum) sent me another one to see if that was it. The new jig he sent (that worked on his phone) did the same thing. So, something else is going on.
I was going from Phoenix 4.5 to Supernova ROM and it gave me the same error you got. Now it Boots the ATT screen then loops the Phoenix ROM logo over and over. 1 vibrate followed by 2 more
I'm hoping the JIG works for mine, otherwise I'm not sure what to do. I admit it does scare me a bit to see that you've tried all these different things with no result. I was scanning the precision thread and it seems one of the avid users/posters got caught in a boot loop and it looks like they have gotten out of it, I sent a PM so maybe I can see what that user did, though part of me is thinking that the three button method worked for him but for some reason not for me. This is very frustrating and I'll keep an update on everything, the JIG should be here in about 3 days or so.
Also, you think it may have something to do with how many times our phones have been flashed? Ive looked up to see if flashing is bad for the phones "health" but it seems flashing won't really hurt anything, nor have I really flashed too much. Btw, my phone acts the same you described as well, with the random vibrating and everything.
My mind just seems to be jumping to any random possibility, it just sucks not having a working phone.
Hope SOMETHING works for you
Seriously - you guys are all worked up over a boot loop. the JIG will put you into dl mode just fine... only time it has high chance of NOT working is if you only see black screen - no power up at all.... you can make a JIG by getting 3 - 100k ohm resistors and a 1k ohm resistor from radio shack for about $1.25... its simple.
I removed my 3 button combo accidentally by flashing att 1 click, theres an att 1 click with 3 button fix, flash that when you can get into download mode.
If you can connect with adb use it to go to download, if not, you need a jig... it works, I have been down your path!
jgc121 said:
Seriously - you guys are all worked up over a boot loop. the JIG will put you into dl mode just fine... only time it has high chance of NOT working is if you only see black screen - no power up at all.... you can make a JIG by getting 3 - 100k ohm resistors and a 1k ohm resistor from radio shack for about $1.25... its simple.
Click to expand...
Click to collapse
+1. Learn how to make the JIG you need HERE...
Or buy one from me HERE... < Shameless plug.
I was in the same situation as you guys after i had a bad flash and the loop on the bootanimation. I bought a jig online and it worked. The trick is to take out your microsd, and simcard and leave out the battery for 15 seconds. Then put back ONLY the battery in, and plug in the jig. It should turn back on and be put into download mode then flash with one click odin.
odin one click WITH 3 button fix....... saftey first.
Stuck at "Samsung Galaxy" boot screen, cant get into bootloader, computer wont detect
Hey everyone this has been a huge hassle for me for the last few days and was hoping someone could help me. I have had to resort to using my HTC Legend...which I love but it doesnt have what I need.
I was in recovery the other day trying to load a custom rom through the CWM and I went through and accidentally hit "format system". I couldn't cancel the process so I knew something bad was going to happen....I reboot the phone and for the last 3 days I have had it plugged into the Usb charger with no luck of booting, it has been stuck at the "Samsung Galaxy S 19000M" boot screen and no further. I took the battery out and tried rebooting it after a few minutes. No luck with this either, still stuck at the Samsung screen. I CAN get into "DOWNLOAD MODE" but I CAN NOT get into recovery/bootloader (hold volume up/home button/power button).
I have put it into download mode and and plugged it into the computer (I am running Windows 7 64-bit) and it will not detect it. I have all of the correct drivers, I know this as I have a friend who owns the exact same phone and my computer detects it just fine. Odin nor ADB will detect that there is anything AT ALL plugged into the computer. It does not even come up as, "android device", or "storage", there is nothing, nota, it is as if the phone isn't even plugged in. It will not detect in "download mode" nor while its stuck at the "Samsung Galaxy S" screen, and yes I have tried a different USB cable, and still nothing..
I am quite capable with electronics but I cannot find anything on the internet as of what to do. Is there anything that I could load on an external SD card that would force the phone to flash a ROM with new kernal and modem? I think the phone is empty that is why it is not booting, as if there is nothing to load on the phone. Is there anything at all that anyone can think of??? I am completely stuck. I wanted this phone to last until the Samsung Galaxy S 2 was released here lol.
I'm with Virgin Mobile Canada. Thanks!
Cant you get it into Recovery mode?
Have you tried heimdall?
You will have to follow the instructions coming with it to the letter (about installing some custom USB-driver).
Herman76 said:
Cant you get it into Recovery mode?
Click to expand...
Click to collapse
Hey herman, "I CAN get into "DOWNLOAD MODE" but I CAN NOT get into recovery/bootloader (hold volume up/home button/power button)."
profalbert said:
Have you tried heimdall?
You will have to follow the instructions coming with it to the letter (about installing some custom USB-driver).
Click to expand...
Click to collapse
Hey, I will search for that right away and let you know how it turns out. Thank you!!
well if you have download mode then dont panic.
just flash a 3 file firmware along with pit file and re-partition and you will be fine
azzledazzle said:
well if you have download mode then dont panic.
just flash a 3 file firmware along with pit file and re-partition and you will be fine
Click to expand...
Click to collapse
How can I flash any firmware if my PC will not detect the phone? When I plug the phone in there is nothing. Odin doesn't detect the phone, Keis doesn't detect the phone, ADB does not detect the phone, and I just tried Heindall, and it does not detect the phone..... Maybe the actual hardware for the USB plug in is faulty in its self, in which case I am screwed.
Galaxy19000M said:
How can I flash any firmware if my PC will not detect the phone? When I plug the phone in there is nothing. Odin doesn't detect the phone, Keis doesn't detect the phone, ADB does not detect the phone, and I just tried Heindall, and it does not detect the phone..... Maybe the actual hardware for the USB plug in is faulty in its self, in which case I am screwed.
Click to expand...
Click to collapse
i see..... i only read the last 2 posts and im always telling people off for not reading properly
have you tried the obvious steps such as
Un-install - Re install Kies
Run Odin as administrator
Tried Alternative USB port - direct into the PC motherboard
Finally a different PC all together
hope you can get it workin hate to see another broken SGS
azzledazzle said:
i see..... i only read the last 2 posts and im always telling people off for not reading properly
have you tried the obvious steps such as
Un-install - Re install Kies
Run Odin as administrator
Tried Alternative USB port - direct into the PC motherboard
Finally a different PC all together
hope you can get it workin hate to see another broken SGS
Click to expand...
Click to collapse
I have tried, uninstall-re install of kies, run odin as admin, alternate usb port, anddd I tried plugging it into my laptop...no luck...this absolutely driving me nuts because I know the phone cant be bricked, if I can get into download mode I SHOULD be fine but for some strange reason the phone seems to be undetectable...ahhhhhhhhhhhh if only there was just some way to access the internal storage or a program that would force a flash through an external SD....
I am going to try loading Ubuntu on my computer on one of my HDD and see if it will detect the phone. I am assuming this is my last option and I have high hopes as Ubuntu detects almost anything...I will update...if it doesnt work I might be looking into taking apart the phone its self and intalling a new USB plug in on the phone motherboard...
im not sure of any other steps
last resort.... have you tried another USB cable ? like your friends cable that he uses for his phone ?
EDIT: if i was you i WOULD NOT take the phone apart.... if you do and it does not work, your warranty will be void,
at least if you cant get it working you can send it off for repair and blame kies, you will have a good chance of getting it fixed by samsung than you would yourself
azzledazzle said:
im not sure of any other steps
last resort.... have you tried another USB cable ? like your friends cable that he uses for his phone ?
Click to expand...
Click to collapse
yeah lol like I said in the first post I tried a different USB cable all together.
I have two HTC Legends, tried both cables from them, plus the OEM cable that came with the SGS
azzledazzle said:
im not sure of any other steps
last resort.... have you tried another USB cable ? like your friends cable that he uses for his phone ?
EDIT: if i was you i WOULD NOT take the phone apart.... if you do and it does not work, your warranty will be void,
at least if you cant get it working you can send it off for repair and blame kies, you will have a good chance of getting it fixed by samsung than you would yourself
Click to expand...
Click to collapse
I dont know if it has been opened already by someone else. I bought the phone for $180 CAD from a sort of "2nd turn" site. As in it was being sold as is. The phone problem reported by them was that the USB connectivity was not working. When I originally got the phone from them everything was working correctly, except the USB connectivity like it stated. It came ROOTED and loaded with the leaked version of Froyo before it was out so I automatically assumed that was causing the USB problems. I got around to changing the ROM with a reported working USB using CWM. But, still no luck with USB connectivity. I just dealt with the problem and flashed everything through CWM. Which led me to this...ugh
Is there supposed to be a warranty seal behind the battery cover? Over the screws like there usually is? Cause I see nothing..
thats not good news.
there is no warranty sticker, but samsung could find out if the phone has been opened.
It depends on the actual repair guy, to be honest, samsung will have 100's of phones to repair daily, the majority just get passed on - flashed - wiped - boxed and sent back to the owner.
however if some (P)Rick is having a bad day and wants to find out why the phone is in for repair, and he finds out its been opened up, or its had custom firmware, then he can refuse to fix the phone or send it back to you with a bill included lol.
so you have to have a good excuse incase the worst happens.
if you dont fancy your chances and you feel capable of replacing the USB yourself then hey go for it !!
azzledazzle said:
thats not good news.
there is no warranty sticker, but samsung could find out if the phone has been opened.
It depends on the actual repair guy, to be honest, samsung will have 100's of phones to repair daily, the majority just get passed on - flashed - wiped - boxed and sent back to the owner.
however if some (P)Rick is having a bad day and wants to find out why the phone is in for repair, and he finds out its been opened up, or its had custom firmware, then he can refuse to fix the phone or send it back to you with a bill included lol.
so you have to have a good excuse incase the worst happens.
if you dont fancy your chances and you feel capable of replacing the USB yourself then hey go for it !!
Click to expand...
Click to collapse
Well thank you for all the help. I am going to try installing Ubuntu first and see what happens, I have never had any driver issues with that OS EVER so if its detectable, Ubuntu will be the one to detect it. If that doesn't work I might take my chances and send it in. And if like you said that one person decides to screw me over, they at least have to send it back to me, in which case I will just open it myself and change the USB plug in like I said. (which might not even be the problem...)
Is there anyway to tell on the out side without opening it if it has indeed been opened before???
erm..... i dont think so, but i dont know what measures samsung have took to find this out.
if it was me the obvious things i would look for is, damaged screw heads and scratches down the sides - where the casing has been prised open. other than that i would not know what to look for
either way, i hope u get it fixed
azzledazzle said:
erm..... i dont think so, but i dont know what measures samsung have took to find this out.
if it was me the obvious things i would look for is, damaged screw heads and scratches down the sides - where the casing has been prised open. other than that i would not know what to look for
either way, i hope u get it fixed
Click to expand...
Click to collapse
Well I sent my phone in to Samsung last week and I just got it back today! I opened it up and I guess the problem with the phone was pretty bad lol they just gave me a new phone, I was thinking it was refurbed but it said right on the repair receipt "condition=NEW" I am extremely happy.
That aside, do you know if you can use the SGS II if it is unlocked in Canada?
Oh dear...
I was experiencing the PHONE-->Triangle-->PC logo problem after a flash with odin went 'wrong' with my galaxy S phone.
I followed the guide here to solve it:
http://forum.xda-developers.com/showthread.php?t=981343
And as a result flashed my phone with the stock firmware from this file:
T959UVKA6_REV05_home_low_CL860813.tar
ODIN successfuly reported a green 'Success' Screen, so i disconnected the phone and tried to power it on. But the device is completely 100% unresponsive.
Nothing happens when i plug it into the PC, nor when i charge it from the mains.
I've searched and tried loads of suggestions from this and other forums, solutions including:
1. Removing battery, holding both VOL keys down, plugging into PC.
2. Holding normal HOME, VOL+, Power key. and HOME, VOL-, Power Key...
The problem is, i cannot get the galaxy s to respond to ANYTHING. So there is no way i can get into the download screen to re-flash.
Can anyone lend any advice to me about this issue? Is the phone totally dead now?
I read things about a JTAG? or somesuch cable, but these cables appear to only work as long you can get the "downloading" screen to work.
I don;t want to throw my phone away. Can anyone help?
Thanks
Could you tell us why the dirst flash went wrong ?
Sent from my GT-I9000 using Tapatalk
doctor_vai said:
Could you tell us why the dirst flash went wrong ?
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
The first flash went 'wrong' becuase ODIN kept getting stuck at the setupconnection stage.
I learnt that removal of the SDCard and SIMCard was the route to fix this, but having fixed it, i flashed it with the stock ROM as detailed in the first post.
Thanks
Hi.
Firstly. If the phone will not response if you put the charger on it the bootloader seems to be dead.
Maybe a possibility would be to use a "USB jig"
Thats not the JTAG!!
JTAG is a develover device for flashing and only the samsung support will have such jtags.
JIG (for USB) is a resistor soldered to the usb connector.
You can buy that usb jig in amazon, ebay or do it yourself.
May you can switch the phone into download mode with it. But no guarantee..
GalaxyKnight said:
Hi.
Firstly. If the phone will not response if you put the charger on it the bootloader seems to be dead.
Maybe a possibility would be to use a "USB jig"
Thats not the JTAG!!
JTAG is a develover device for flashing and only the samsung support will have such jtags.
JIG (for USB) is a resistor soldered to the usb connector.
You can buy that usb jig in amazon, ebay or do it yourself.
May you can switch the phone into download mode with it. But no guarantee..
Click to expand...
Click to collapse
Thank you GalaxyKnight...
i've just bought a USB jig on ebay for £1.25, hopefully it works.
I'd rather not have to throw the phone away.
mcai8rw2 said:
Oh dear...
I was experiencing the PHONE-->Triangle-->PC logo problem after a flash with odin went 'wrong' with my galaxy S phone.
I followed the guide here to solve it:
http://forum.xda-developers.com/showthread.php?t=981343
And as a result flashed my phone with the stock firmware from this file:
T959UVKA6_REV05_home_low_CL860813.tar
ODIN successfuly reported a green 'Success' Screen, so i disconnected the phone and tried to power it on. But the device is completely 100% unresponsive.
Nothing happens when i plug it into the PC, nor when i charge it from the mains.
I've searched and tried loads of suggestions from this and other forums, solutions including:
1. Removing battery, holding both VOL keys down, plugging into PC.
2. Holding normal HOME, VOL+, Power key. and HOME, VOL-, Power Key...
The problem is, i cannot get the galaxy s to respond to ANYTHING. So there is no way i can get into the download screen to re-flash.
Can anyone lend any advice to me about this issue? Is the phone totally dead now?
I read things about a JTAG? or somesuch cable, but these cables appear to only work as long you can get the "downloading" screen to work.
I don;t want to throw my phone away. Can anyone help?
Thanks
Click to expand...
Click to collapse
Hm why did you flash Vibrant firmware? If you don't have vibrant of course it doesn't work..and if it contained bootloaders your phone is probably hard bricked (assuming vibrant had different bootloaders from i9000). But if you only flashed ROM then you have good chances of recovering it with jig..let's hope it works
Sent from my CM'd SGS
Does a "hard brick" mean it is proper dead?
I could have sworn i got that last firmware file from a samsung galaxy s forum?!
When flashing with proper firmware ("Cyanogen") will the flash re-write/fix the bootloaders? Or to put it another way... what options do i need to select in Odin?
Thanks
Jig Doesn't Work
Hi... sorry to self bump like this.
I bought a JIG off ebay, plugged it into the phone and sadly the phone did nothing.
Does that mean that the phone is ultra-dead, and there is NO HOPE?
I don;t want to throw it away mommy!
Could the battery be flat?
***Edit - I used the jig on a friends Galaxy S and the phone went into download mode ok. But it does not on mine.
If windows doesn't even recognise the device in any capacity at all... doesn't that mean Game Over? Surely any solution now would still require windows to see the device?
mcai8rw2 said:
Hi... sorry to self bump like this.
I bought a JIG off ebay, plugged it into the phone and sadly the phone did nothing.
Does that mean that the phone is ultra-dead, and there is NO HOPE?
I don;t want to throw it away mommy!
Could the battery be flat?
Click to expand...
Click to collapse
was there any sign of life from the phone before?
Sent from my GT-I9000 using xda premium
If you have a i9000, that's not a vibrant, and I think that rom you flashed probably contains bootloaders (since it's meant for recovery). Did you select phone bootloader update in odin?
You could try borrowing a battery/charging the one you have, it might be flat, hence why you can't turn on the phone at all. (Maybe vibrant bootloaders have some similarities). Also try check if vibrant has alternate ways of getting to download mode
Lastly, try http://forum.xda-developers.com/showthread.php?t=1330491
Thank you
I have tried using the JIG on a battery that is full, and i still get zero response from my phone.
The link you gave me looks at first glance to be quite complex, but seeing as it is dealing with hardware, it looks like it might work.
Cheers
J
If you open the firmware file with 7Zip, you'll be able to check if it contains bootloaders. Look for bootloader.bin and sbl.bin, if I recall correctly.
Also, what was the battery at when you were flashing? I remember accidentally flashing a Vibrant ffirmware when I first got my i9000m (due to the box saying "Samsung Vibrant", duh) and I distinctly remember my phone losing the ability to charge the battery. If your battery died, there's a good chance that nothing is happening because of this, even when you plug your phone in.
Your best bet sounds like getting a USB jig, I'd say. But check to see if the file you flashed contained bootloaders. If it didn't, it's probably something similar we've overlooked. If it does contain bootloaders, you may have bricked your device.
Use UnBrickable Mod http://forum.xda-developers.com/showthread.php?t=1330491
This allows total resurrection regardless if you've damaged your bootloaders or not. You just need to mod your device once and then you can upload Download Mode from then on!
If you'd like, I can perform the mod. I ask for $30 + shipping (usually $6 unless you're overseas). Send me a PM if you need me to do it.
There is no better option than UnBrickable Mod. If you have JTAG performed, then you've got a working device one time. If you do UnBrickable Mod, you can ALWAYS upload Download Mode by removing the battery, plugging it into the computer and pressing the "Download Mode" button on the resurrector I created.
SBL.BIN file located.
Oh deary deary me... the firmware DOES contain an SBL.BIN file :-(
Sadly, i tried all softbrick button pushing solutions on a friends FULL battery. But this had no effect either. And i have already bought a USB jig, that does nothing on my bricked phone, but DOES work on another GalaxyS. This might be the battery though.
Having never soldered anything in my life, i am reticent to start on the hardware hacking side of things if there is another option. But the longer this goes on, the less and less likely it sounds like another option is available.
For Sparta?
upichie said:
If you open the firmware file with 7Zip, you'll be able to check if it contains bootloaders. Look for bootloader.bin and sbl.bin, if I recall correctly.
Also, what was the battery at when you were flashing? I remember accidentally flashing a Vibrant ffirmware when I first got my i9000m (due to the box saying "Samsung Vibrant", duh) and I distinctly remember my phone losing the ability to charge the battery. If your battery died, there's a good chance that nothing is happening because of this, even when you plug your phone in.
Your best bet sounds like getting a USB jig, I'd say. But check to see if the file you flashed contained bootloaders. If it didn't, it's probably something similar we've overlooked. If it does contain bootloaders, you may have bricked your device.
Click to expand...
Click to collapse
Sounds like AdamOutler is your solution for this one.
i have the same issue!!
i have the exact same problems and it happened right after i installed clockworkmod through odin and then i tried other suggestions until i used a eugene file and once i did that, it completely murdered my phone and its become completely unresponsive.. BUT i noticed that even though the screen wont come on or anything, THE BATTERY ACTUALLY STILL CHARGES! plzzzzzz help
I know this thread is a little old now... but i just wanted to say a big huge THANKS to MOBILETECHVIDEOS.
http://mobiletechvideos.mybigcommerce.com/samsung-i9000-jtag-brick-repair/
I sent my phone off to them and they fixed my dead Samsung completely.
For anyone having this same problem... make sure you check out their website. As they are masters at ressurecting a dead phone!
this problem solve or not ? cause im having the same problem too
AdamOutler said:
Use UnBrickable Mod http://forum.xda-developers.com/showthread.php?t=1330491
This allows total resurrection regardless if you've damaged your bootloaders or not. You just need to mod your device once and then you can upload Download Mode from then on!
If you'd like, I can perform the mod. I ask for $30 + shipping (usually $6 unless you're overseas). Send me a PM if you need me to do it.
There is no better option than UnBrickable Mod. If you have JTAG performed, then you've got a working device one time. If you do UnBrickable Mod, you can ALWAYS upload Download Mode by removing the battery, plugging it into the computer and pressing the "Download Mode" button on the resurrector I created.
Click to expand...
Click to collapse
Are you still working in the Unbrickable mod?
I've got an 896 Rogers Captivate that has been draining my sanity for hours now.
I managed to get it to download mode exactly ONCE out of ... literally eight hours of hold buttons, remove battery, replace battery, hold buttons, remove battery, etc etc.
I reached download mode by using the three button technique Volume Up + Volume Down + Power.
Once there I idiotically said "I can get here again.." and removed the battery.
I got this phone from a family member and managed to get it to download mode, but every other time I hold buttons (any buttons) it does exactly this:
If plugged into the computer it shows the loading daisy (which doesn't animate). I can hold any combination of the volume buttons and power button and it will flash black and return to the daisy.
If not plugged in, it shows the model number and 'Samsung'. Behavior is the same. Holding volume up, or down and the power button will flash black after eight seconds and then show the model and 'Samsung'.
I haven't tried Odin (although I've downloaded it and a rom thusly), a Jig, or any of the other brute force approaches to reaching download mode simply because I know that if I reached there once, I should be able to reach there again. Computers aren't sentient (although I swear this phone enjoys tormenting me).
Does any body have any insight to why I would be going through this?
Why won't it reach download mode again?
Just fyi: I have literally tried every button combination I can suss from the countless threads I've scoured and scanned.
Thanks in advance for any insight anyone can provide.
Just to make sure, as I didn't see it in the post, you did do v+/v- and insert the usb cord from a powered off state, right?
Also, check the captivate connection issues thread in my signature if you haven't already.
Different reaction
Hey thank you! Your list is handy!
I'm shocked I hadn't stumbled upon it already, or your signature for that matter..
Seriously can't understand how this is the first time I've seen it.
I've tried the [FROM A POWERED-DOWN STATE - BATTERY REMOVED] procedures but none of them got me into download mode.
Thanks all the same.
I'll try the battery charging list next.
Quick (and possibly stupid) question : Does it matter if it's an official Samsung USB cable?
As I noted in my initial post, I managed to get into download mode earlier today (little Android digging my grave with the same cable I've been struggling with for the past six hours.
Luck!
omigodomigodomigodomigodomigodomigod
okay, so I managed to get into d/l mode by plugging to power (outlet usb) and then applying three buttons.
So:
Battery Out
Plugged into USB
Battery In
Hold VolUp+VolDown+Power
Android man digging my grave showed up.
It should be noted that this same process was conducted several times against my PC upon which the technique worked several hours (and several hundred attempts, and half a season of StarTrek TNG) ago.
...now what (lol!)
I guess I'll fire up Kies and conduct a few more hours of scouring!
well you COULD go about flashing roms and kernels and modems to your hearts delight. But I would advise against that. I'd recommend first backing up EVERYTHING. Especially your /efs (you'll need to be rooted) folder if your considering flashing a rom. Once you do that you're free to flash. Just be sure to read the OP of the rom to make sure you meet the requirements for the rom or kernel, such as if you have the right boot loaders. As long as you read, you really can't go wrong with the captivate.
Sent from my SGH-I897 using XDA App
I'm not entirely sure how the phone reached this state but according to all the stuff I've read, if the phone is in this state it's recoverable using Kies.
However Kies doesn't seem to care that I've got this phone plugged in.
Frankly, there's nothing to back up, and if flashing out with Odin is the only way to establish a working Captivate then I suppose i've got some files to download.
Does anybody have any insight regarding Kies and getting it to play nice nice?
Do you have Samsung drivers installed?
Personally, I have only got Kies to work when the phone was actually on.
Sent from my SGH-I897 using XDA App
If your in download mode, I suggest just flashing back to stock using heimdal.
(I don't use odin 1-click stocks because my first attempt at using it corrupted my bootloaders. My phone would power on, go through the AT&T screen for hours. I also could not enter recovery or download using 6 different methods including a jig. I lost hope and accidentally left my phone on when I went to bed. I wake up next morning and it booted up. I used terminal emulator from the market and used the command Reboot Download. I worked, then I flashed back to stock using hiemdal. I am not completely sure why I shared this story but w.e )