Hello all XDA members,
I have very specyfic problem. When I flash some custom kernels, especially Alfs for GingerDX v08a + GingerDX v25, nAa-11/-13 + MiniCM7 or other GB ROMs (read twice, Gingerbread only / naa-ics works fine with nAa's CM9) my phone is rebooting at kernel bootlogo. I tried to restore to stock Eclair, relocking bootloader but problem is still the same.
Update
Now I can't install custom ROMs also in stock SE kernel. What the hell is going on?! Begin was a few days ago, when I couldn't run phone with nAa's kernel and ROM. Then, after a day, there was a same problem with GingerDX on Alfs v9. Next - GDX on Alfs v8a > MiniCM9 on nAa-ics > All ROMs with custom kernels > Now = all custom ROMs, working only Android 1.6 and 2.1.
Have you full wiped ?
Sent from my E15i using xda app-developers app
AndroidCMD_PL said:
Hello all XDA members,
I have very specyfic problem. When I flash some custom kernels, especially Alfs for GingerDX v08a + GingerDX v25, nAa-11/-13 + MiniCM7 or other GB ROMs (read twice, Gingerbread only / naa-ics works fine with nAa's CM9) my phone is rebooting at kernel bootlogo. I tried to restore to stock Eclair, relocking bootloader but problem is still the same.
Click to expand...
Click to collapse
wweewww...strange
had u follow the instruction step by step??
backup all your data n apps first, then
try to downgrade it first by flashing the X8 E15i 2.1.1.C.0.0._un.ftf
root
unlock BL
Flash the latest kernel
backup
factory reset, wipe batt, etc (important)
Flash ROM
Done!
flash nAa for miniCM - alfs for GDX
Yes, I do. Full Wipes, Flashing stock kernel & ROM etc.. Now I tried HACKDROID Floyo v0.3 + Alfs v7 + Fix for Alfs = also doesn't work.
Now it happens on any custom kernel, also nAa-ICS. I don't want to stay at stock. Maybe option "Exclude kernel" in Flashtool will help? I don't know what is it and I don't want to brick my X8.
Edit - I've updated title and 1st post because of new problems.
AndroidCMD_PL said:
Yes, I do. Full Wipes, Flashing stock kernel & ROM etc.. Now I tried HACKDROID Floyo v0.3 + Alfs v7 + Fix for Alfs = also doesn't work.
Now it happens on any custom kernel, also nAa-ICS. I don't want to stay at stock. Maybe option "Exclude kernel" in Flashtool will help? I don't know what is it and I don't want to brick my X8.
Edit - I've updated title and 1st post because of new problems.
Click to expand...
Click to collapse
weeww....
now, can you downgrade your phone??
is still restart your phone?
if yes, try to root again...unlock, etc
Did you went back to stock before? Maybe you forgot to update baseband....
Sent from my X8 using xda premium
stamatis16 said:
Did you went back to stock before? Maybe you forgot to update baseband....
Sent from my X8 using xda premium
Click to expand...
Click to collapse
BASEBAND is the problem, after upgrade to stock you will have 06 and you need 15 - took me last 2 days to figure it out again Otherwise you will have just kernel bootloop
I've updated my baseband, and it works!!! :laugh:
Thank you XDA communicate - You are awesome!
Related
I have succesfully unlocked my bootloader...
Now i need a rom which is fully working without bugs..
I have been out of this forum for months and now have no idea what to use
plz suggest me best rom, without bugs
and guides to install the rom
i have not done anything after craking bootloader
so to install a custom and kernel i will need guide, also how to install xrecovery or cwm recovery
how to install and all
plz help
Use Minicm with nAa! Kernel or xperiafan13 Minicm port for alfs kernel both are stable äMR fully working.
For other things tutorials are available just try to search.
Sent from my E15i using XDA Premium App
i use gingerdx v022 with alfs kernel. but its really up to you. becuase what specific thing do you want? performance? gaming?
apart from stability.
alfs icsv7 and cm7 v6 by xperiafan.its really fast!!!
press thanks if i helped !!!
Gingerxperia with nAa kernel....best and fastest !!!
HIT THANKS !!!!
vicky6672 said:
I have succesfully unlocked my bootloader...
Now i need a rom which is fully working without bugs..
I have been out of this forum for months and now have no idea what to use
plz suggest me best rom, without bugs
and guides to install the rom
i have not done anything after craking bootloader
so to install a custom and kernel i will need guide, also how to install xrecovery or cwm recovery
how to install and all
plz help
Click to expand...
Click to collapse
Alfs kernel or nAa kernel are pretty good. GingerDx is my favourite ROM.
Well your bootloader is unlocked so either of the kernels have CWM recovery installed (xRecovery is pretty much obsolete). "craking bootloader" is legal to do this. An advantage of having Android. Most phones come these days with there bootloaders unlocked.
This is nAa description of how to install his kernel found on his thread: http://forum.xda-developers.com/showthread.php?t=1350484
Flash tool:
http://forum.xda-developers.com/showthread.php?t=986697
This is GingerDx thread description to install Rom is in here:
http://forum.xda-developers.com/showthread.php?t=1188486
Hit the thanks button!!!
bahmonkeys said:
Alfs kernel or nAa kernel are pretty good. GingerDx is my favourite ROM.
Well your bootloader is unlocked so either of the kernels have CWM recovery installed (xRecovery is pretty much obsolete). "craking bootloader" is legal to do this. An advantage of having Android. Most phones come these days with there bootloaders unlocked.
This is nAa description of how to install his kernel found on his thread: http://forum.xda-developers.com/showthread.php?t=1350484
Flash tool:
http://forum.xda-developers.com/showthread.php?t=986697
This is GingerDx thread description to install Rom is in here:
http://forum.xda-developers.com/showthread.php?t=1188486
Hit the thanks button!!!
Click to expand...
Click to collapse
I have installed :FroyoPro:- v2.4 Android 2.2+3 with stock kernel and dual recovery using a x8 tool box.. hw do i install nAn kernel, it says required MiniCM or gingerbread roms, any help
vicky6672 said:
I have installed :FroyoPro:- v2.4 Android 2.2+3 with stock kernel and dual recovery using a x8 tool box.. hw do i install nAn kernel, it says required MiniCM or gingerbread roms, any help
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1350484
it mean :
- Download the kernel .ftf file and move it to Flashtool\firmwares so that Flashtool can pick it up
- Flash the kernel via Flashtool (turn off phone, press back button, connect your usb phone cable to computer, see led in your phone blink green, then release back button. flashing should be running.. wait until finished..
- unplug your usb phone cable
- turn on your phone.
I just want to know that how can I flash nAa kernel on my x8,
m on stock kernel with froyo pro ROM. do i need any other ROM to flash it or i can simply flash it...!!!
vicky6672 said:
I just want to know that how can I flash nAa kernel on my x8,
m on stock kernel with froyo pro ROM. do i need any other ROM to flash it or i can simply flash it...!!!
Click to expand...
Click to collapse
hello vicky
in order to flash kernels you need to unlock your bootloader....
You may search the forum for unlocking the bootloader.
But keep extra caution in the process of unlocking bootloader because you may brick your phone.
Press thanks if I helped.....
harshitgroup said:
hello vicky
in order to flash kernels you need to unlock your bootloader....
You may search the forum for unlocking the bootloader.
But keep extra caution in the process of unlocking bootloader because you may brick your phone.
Press thanks if I helped.....
Click to expand...
Click to collapse
I have unlocked my bootloader, i just want to know that can I flash kernel with any rom installed, I have Froyopro, so can i flash nAa kernel, I am in stock kernek now
Froyopro propably won't start on nAa kernel and it will stop after boot animation/kernel animation. You should try miniCM7 (and based on it ROMs) versions 2.1.8 and 2.1.9 for kernels nAa 10 and 11. If You would like older versions of MiniCM on kernels nAa 10 and 11 You will have to install also new graphic drivers (in CWM), cause without them performance will be very low. nAa 09 suits MiniCM7 ROMs f.e. 2.1.6 and 2.1.7. So there's a plenty of options
Bolussimo said:
Froyopro propably won't start on nAa kernel and it will stop after boot animation/kernel animation. You should try miniCM7 (and based on it ROMs) versions 2.1.8 and 2.1.9 for kernels nAa 10 and 11. If You would like older versions of MiniCM on kernels nAa 10 and 11 You will have to install also new graphic drivers (in CWM), cause without them performance will be very low. nAa 09 suits MiniCM7 ROMs f.e. 2.1.6 and 2.1.7. So there's a plenty of options
Click to expand...
Click to collapse
But can i install MiniCM without nAa kernel, MinICM 7 requires nAa kernel..m confused now. do first i need to flash kernel or minicm 7,
vicky6672 said:
But can i install MiniCM without nAa kernel, MinICM 7 requires nAa kernel..m confused now. do first i need to flash kernel or minicm 7,
Click to expand...
Click to collapse
If you want to install MiniCM7, you need aNa kernel. unlocked bootloader=> flash aNa kernel=> install Roms!
Check the date of manufacturing first before unlocked bootloader, otherwise, it may break your phone!
As You can see at MiniCM's google page: http://code.google.com/p/minicm/ versions 6 supports stock SE kernel. If You want miniCM7 - it's neccesary to flash nAa kernel.
1). Download ROM and copy it on SD.
2). Flash nAa kernel.
3). Go into CWM recovery, which is built-in in nAa kernel and do full wipe.
4). In CWM Install custom.zip from SD card
If You install CWM7 without nAa kernel propably it won't start at all. And propably You will have to use SEUS to back to stock SE ROM, cause I think there will be no option to get into recovery
Hey, I wanna to get back to 2.3 from MiniCM9 (nAa) and I don't know If I should first change kernel to standard, or first ROM to 2.3. Can somebody tell me?
mati96PL said:
Hey, I wanna to get back to 2.3 from MiniCM9 (nAa) and I don't know If I should first change kernel to standard, or first ROM to 2.3. Can somebody tell me?
Click to expand...
Click to collapse
First change rom to 2.3 then flash the appropriate kernel.
I don't think it really makes a difference, just that one is slightly less risky than the other.
Sent from my E15i using Tapatalk 2
Kernel then rom, if it's rom 1st then you MIGHT have to reflash the rom anyway
Lloir said:
Kernel then rom, if it's rom 1st then you MIGHT have to reflash the rom anyway
Click to expand...
Click to collapse
No need for reflash of rom in any circumstances... point is entering flash mode to flash correct kernel is much more doable and likelier to succeed than entering a kernel embedded recovery to flash a rom.
Hence rom first, then kernel.
Sent from my E15i using Tapatalk 2
Hmm... Who to trust?
I'm curently on nAa ICS kernel and his MiniCM9, and want to get back to Achotjan Semc Debrand Engine 2.3 with nAa 11 kernel
From my experience there is no difference at all because the kernel you wanna flash has a recovery and gives you the option to flash your rom. For example when I wanted to revert back to stock without using seus I flashed the rom first and then the kernel because if I did otherwise my device would be softbricked. I hope I made my self clear. The choice is up to you. But I like flashing the kernel first;-)
Sent from my U20i using xda premium
Ok, so I tried now with kernel first -> that doesn't work, now I'm going to check with rom first
you cant build a house without foundation! flashing the kernel first is only proper way to do this!
1.put 2.3 Rom in SD
2.flash a kernel
3.on 1st boot(at kernel logo)push back button rapidly to enter cwm
4.make a full wipe and install 2.3 rom
5.done
zmuhammx said:
1.put 2.3 Rom in SD
2.flash a kernel
3.on 1st boot(at kernel logo)push back button rapidly to enter cwm
4.make a full wipe and install 2.3 rom
5.done
Click to expand...
Click to collapse
exactly right~!
It doesnt mattersjust do both no matter which first
Sent from my E15i using XDA
how do i flash my x8 to minicm7 if my current rom is gingerdx
my date code is below 11W28
then how to do it?
i hvnt unlock the bootloader
but now im going to unlock it
after i unlocked and flash the nAa kernel (mean im still stock kernel)
and then wipe data straight and install the minicm7 custom zip??
thomaswoh said:
how do i flash my x8 to minicm7 if my current rom is gingerdx
my date code is below 11W28
then how to do it?
i hvnt unlock the bootloader
but now im going to unlock it
after i unlocked and flash the nAa kernel (mean im still stock kernel)
and then wipe data straight and install the minicm7 custom zip??
Click to expand...
Click to collapse
GOSH...
Why dont you people just search.....
There are instructions on every ROM thread on how to install it! READ
hwooww....careful dude!
read this first!
hit the thanks dude! :laugh::laugh::laugh:
i mean, how do i flash the minicm7 rom from gingerdx!! nt from stock rom!! every custom rom thread no mention any instruction that how to flash from a custom rom!!
Chris95X8 said:
There are instructions on every ROM thread on how to install it! READ
Click to expand...
Click to collapse
i mean, how do i flash the minicm7 rom from gingerdx!! nt from stock rom!! every custom rom thread no mention any instruction that how to flash from a custom rom!!
thomaswoh said:
i mean, how do i flash the minicm7 rom from gingerdx!! nt from stock rom!! every custom rom thread no mention any instruction that how to flash from a custom rom!!
Click to expand...
Click to collapse
First make sure that your phones' bootloader has been unlocked.Then download nAa 11 kernel and MiniCM7.Put the ROM in your SDcard and turn off your phone.Flash nAa 11 kernel.After done flashing kernel,reboot to recovery by pressing back button countinuosly when you see nAa logo.In recovery,do full wipe,wipe cache partition,wipe dalvik cache,flash the ROM and reboot..
Hope I helped you..
And remember to talk in the polite way.Don't use this (!!) sign.People here will treat you well if you behave nicely..
Sent from my Xperia X8
thomaswoh said:
i mean, how do i flash the minicm7 rom from gingerdx!! nt from stock rom!! every custom rom thread no mention any instruction that how to flash from a custom rom!!
Click to expand...
Click to collapse
first, miniCM7 only built on custom kernel, so you've to unlock your bootloader
and then flash the nAa kernel or AlfsCM7 kernel
about flashing from custom rom, its just the same, you go into the recovery and simply flash it with the right kernel
nazz.rule said:
First make sure that your phones' bootloader has been unlocked.Then download nAa 11 kernel and MiniCM7.Put the ROM in your SDcard and turn off your phone.Flash nAa 11 kernel.After done flashing kernel,reboot to recovery by pressing back button countinuosly when you see nAa logo.In recovery,do full wipe,wipe cache partition,wipe dalvik cache,flash the ROM and reboot..
Hope I helped you..
And remember to talk in the polite way.Don't use this (!!) sign.People here will treat you well if you behave nicely..
Sent from my Xperia X8
Click to expand...
Click to collapse
i used that symbol because he did not answer my question properly, btw thanks i will try disuse that symbol
thomaswoh said:
i used that symbol because he did not answer my question properly, btw thanks i will try disuse that symbol
Click to expand...
Click to collapse
So did you managed to flash MiniCM7 on your phone?
My x8 has rooted .and Xrecovery installed .but when i try to install any stock rom. it stopped in sony ericsson logo. then i have to flash my x8 again .How can i solve this problem?
Any stock rom? What roms u installed?
Install latest baseband and try
Sent from my X8 using Tapatalk 2
Before installation check whether that rom is for stock kernal not any other kernal. U can read it from the instructions of that rom.
And fully wipe data in x-recovery before installing any custom rom.
Here are some roms compatible with stock kernal
Gingerdx v28
Kuyadroid 4.5.4
Gingerxperia
Officially corp via W8
flash latest baseband(xxxx15)
check for what kernel is the rom you want to install(if you havent unlock the bootloader, you need those that tell stock kernel)
full wipe and wipe dalvik before installation(some roms require after,see at the thread of the rom you want to install,most of the roms need before the installation)
check all requirements..
your phone baseband must be xx015 (download)
make sure your xrecovery working well
use latest kernel n ROM
I guess it is a basebrand issue flash xx015 basebrand
Sent from my E15i using xda premium