Database Develop

[Q] [HELP] CPU Only 600Mhz

I have only 600Mhz.
I cant overclock only underclock, even with OC-Kernel.
The problem is on Stock Firmware 2.3.3 and Costoum Roms.
Is there a Hardware-Bug or what else?

Not all chips are made to the same quality. They only have to reach a certain clock speed to pass quality checks. Certain devices can be overclocked due to being of higher quality.
Sent from my HTC Desire S using XDA App

Yes but the default clock of the ACE is 800Mhz right? But MY default clock is 600Mhz.
I dont have any options to overclock only from 124Mhz - 600Mhz.
The default clock of 800Mhz would be ok for me..

You sure its a ace? Galaxy fit / mini & 551 / europa are 600mhz MSM7227 vs 800mhz MSM7227-t 800mhz galaxy gio / ace.

Yes! Its definitely a ACE i have the Samsung box here .. and there are a big label Galaxy ACE "800Mhz CPU"

Which rom are you using? Did you have the same problem on stock rom?

Do you have setcpu, if you do go on Info ; CPU what does it say ; Cpu Part / Cpu Revision / Hardware / Revision ?

If problem presist then go to Samsung service centre and change your phone dude
Sent from my GT-S5830 using xda premium

GerasVille said:
Which rom are you using? Did you have the same problem on stock rom?
Click to expand...
Click to collapse
Yes the problems are also on stock rom.
I have the costoum rom "CyanogenMod 7.1-cooper-KANG-RC1 Android 2.3.7" with OC-Kernel
Here are some Screenshots

Cr0nFixXx! said:
Yes the problems are also on stock rom.
I have the costoum rom "CyanogenMod 7.1-cooper-KANG-RC1 Android 2.3.7" with OC-Kernel
Here are some Screenshots
Click to expand...
Click to collapse
Hi @Cr0nFixXx!...
It would seem to me that your problem is your Kernel... The details in your first thumbnail show the kernel to be that of a different dev to @Ketut...!!! Your OC Kernel details should read as this : 2.6.35.7-perf-CL562111 [email protected]#4
The frequencies of the Cpu are governed solely by the kernel, so this is without a doubt your limiting factor...
The below kernel is tried & tested by thousands of users & is stable under OC...(check my sig for details)...
You can download this kernel from my dropbox here : http://dl.dropbox.com/u/44779766/cm-7.1-oc-kernel-2.6.35.7-perf-CL562111.zip
Flash this kernel from CWM recovery... Reboot phone, go to cyanogen setting/Performance & you should get the full cpu range for OC...
To see stable max OC set governor to "Performance"... Remember, only increase cpu frequency a little at a time & test for stability before increasing further...
Only when you have found your max stable clock speed can you tick "set on boot"...
FYI : OC kernels can only be used with custom roms... They will not work with stock roms... @Ketut's OC kernel will only work with CM7.1 / 7.2 Roms... Do not try with any other rom...
Stay Breezy n Be Lucky...
Pe"ACE"...

Thanks for your help but .. same problem
I even cant get it to 800Mhz Default Clock

Cr0nFixXx! said:
Thanks for your help but .. same problem
I even cant get it to 800Mhz Default Clock
Click to expand...
Click to collapse
Hey Dude...
This is a very strange problem indeed... The Armv6 cpu is standard 600mhz cpu but samsung factory OC it when it is used in our aces... so we end up with an end-user frequency of 806mhz... Yours won't even reach that out of the box...?
Do me a favour... Flash this rom here : http://dl.dropbox.com/u/44779766/IceCreamSundayFinal_Tweaked.zip
It is IceCreamSunday Final by @Jusada... It is considered the fastest & most stable rom available on XDA & the OC kernel is inclusive of the rom...
Once flashed, go to cyanogenmod settings, performance, cpu & tell me what frequencies you get offered...?
FYI : It doesn't matter what your baseband or firmware version is... Ensure that you are using CWM 5 to flash with... Also ensure that before flashing you do a full system, cache, data, Dalvik wipe to ensure a clean flash... This rom is 7.2 btw...
Stay Breezy n Be Lucky...
Pe"ACE"...

I dont know whats my phones problem but it dont worked for me -.- even max. 600Mhz...
But great thanks for your help!

LoL the first thing that entered my mind is "maybe samsung forgot to overclock" my suggestion is go to samsung and tell them to overclock that.. or simply say it's defective

approach samsung and get new phone..

man if it showing 600 dont overclock
as overclock can damage your cell
be happy with what you are having

LazySam said:
man if it showing 600 dont overclock
as overclock can damage your cell
be happy with what you are having
Click to expand...
Click to collapse
but he should get 800 which he paid for

hey wait isnt ace's cpu like the 600mhz ones but only OC'ed to 800?

I'm done explaining

A fault with the processor probably.. ARMv6 anyway has 600Mhz by default and Ace has been factory overclocked to 800Mhz.. which is the simple reason why each Ace is so different and has so many problems regarding battery life. Overclocking is a delicate procedure..
To the point:
Just take it to the service center to get what you paid for!

[Q]Overclock

Is there a overclock already or is anyone working on it?
Is this cpu overclockable ? And how much ?

meddistar said:
Is there a overclock already or is anyone working on it?
Is this cpu overclockable ? And how much ?
Click to expand...
Click to collapse
up to 1.2 ghz but not sure if there is a kernel for gb. on froyo though you can go up to that number safely

Maybe something changed since then..
Is there a way to overclock the OB on GB?

No, new nova kernel promised oc but it is delayed.

Zeus v6 has one
Sent from derp-mobile

Yes with zeus you can but use with caution the overclock is bad for android you reduce the life time of phone
Sent from LG-P970

i'm running zeus v6 right now..
going to try the overclock, just for fun..
already tried 1100 mhz, nice increase on benchmark but the feeling is the same..
just going to try some speeds but will probably stay on safe speed.

I did overclock with zeus V6 up to 1.2 GHz, but the maximum is 1.3 ghz, but not appropriate to use this speed, I think ...
But the difference is not much.

With oc and antutu i've 2997 score
Sent from LG-P970 using zeus v6 1,1Ghz

Guys I'm quite new to oc, previously I just tried it in nova so I just want to ask if it can do some to damage to the phone on long term basis? Or basically it is safe as long as you stay in the safe range ( 1.1-1.2)?

processor
U used nova for some time and i even overclocked mine to 1.2 after i used cm7 for a long time and about 3 monts ago my phone sudendly dont pass of LG logo i tried everything including kdz method and nothing work, i send it to warranty when he came the girl of the store say he just got a new processor, the old one didn t work, since that day i think a lot before overclock him again

You must verify the temp (°c) before o/c when the phone is too hot the o/c damage it. And i think 1,2Ghz isn't very stable.
Sorry for my english ,i'm french
Send with Zeus v6 the lightning power in you're P970

If you're on zeus go to Terminal Emulator then type su to gain superuser access, now type zeus and there it is the Zeus Script, there you can overclock and do other tweaks to your phone.
Hope it helps!

champzzz said:
If you're on zeus go to Terminal Emulator then type su to gain superuser access, now type zeus and there it is the Zeus Script, there you can overclock and do other tweaks to your phone.
Hope it helps!
Click to expand...
Click to collapse
thank you but the answer was already given..

koila33 said:
I did overclock with zeus V6 up to 1.2 GHz, but the maximum is 1.3 ghz, but not appropriate to use this speed, I think ...
But the difference is not much.
Click to expand...
Click to collapse
i think personally the maximum to oc zeus v6 would be up till 1250, i tried pushing it to 1300 and got bootloop

Did anyone already set it to lets say 1.2 ghz, then reboot a couple of times, since dvfs should set higher voltages then and then set an even higher frequency? Maybe this would allow you, to go even higher
Sent from my LG-P970 using Tapatalk

niko34 said:
With oc and antutu i've 2997 score
Sent from LG-P970 using zeus v6 1,1Ghz
Click to expand...
Click to collapse
with v20o stock rom with deleted bloatwares, my antutu score is 2550 -2600...
dont ask for quadrant... haha

mdfaisal said:
with v20o stock rom with deleted bloatwares, my antutu score is 2550 -2600...
dont ask for quadrant... haha
Click to expand...
Click to collapse
yeah but with 1.2ghz i guess i saw someone having 3300+
since i got a bootloop, i stopped oc-ing
(will try in holidays)

I have it overclocked to 1180 with zeus v6, higher values make my phone to reboot and crash apps. My best score in antutu is 3038.

[q] can some one help me???

Guyz my x8 ain't stable at 691 mhz.. on stock kernel ....
I tried many roms it is not stable on froyobread,gcr,gdx,kuyadroid,
And xgin...but my phone restarts smtimes whn I use
Some app it don't always reboots but sometimes it just
Freeze n reboot .... what's the max freq stable you guyz got
On stock.kernel? ??
is it.my hardware problem .... I use superchrage ...
Balanced 3 settings....can something be done will changing
The kernel help it? ???

noobismyname said:
Guyz my x8 ain't stable at 691 mhz.. on stock kernel ....
I tried many roms it is not stable on froyobread,gcr,gdx,kuyadroid,
And xgin...but my phone restarts smtimes whn I use
Some app it don't always reboots but sometimes it just
Freeze n reboot .... what's the max freq stable you guyz got
On stock.kernel? ??
is it.my hardware problem .... I use superchrage ...
Balanced 3 settings....can something be done will changing
The kernel help it? ???
Click to expand...
Click to collapse
The higest Freq that my phone was able to go up to was 787 mhz,, and It was stable at 768, If you want to stick to stock kernel,, you might try changing oc module, There are 2 oc modules one by DX and other ones By Zefie,
The best option however is to unlock your Bootloader and Use a custom kernel , according to some people unlocked bootloaders increased their phones oc capabilities .

I am running gingerdx v0.22 and CPu is stable at 768..I am currently having stock kernel.

PLS PLS help me PLZZ

on ..
can u help me why i cant over clock my phone??????? every time i overclock my phone it become more slower
and when i set the cpu to 1600 it go back to 800ghz and lock ther pls help i made this video so u can more understand me thx u.. sory for my bad english
...... correct me if im rong. tell me what to do thx in advance
LINK >>http://www.youtube.com/watch?v=N64d_5ods5g
my kernel is notecore v12
ICS 4.0.4
cleanote 4

galaxynotelover said:
on ..
can u help me why i cant over clock my phone??????? every time i overclock my phone it become more slower
and when i set the cpu to 1600 it go back to 800ghz and lock ther pls help i made this video so u can more understand me thx u.. sory for my bad english
...... correct me if im rong. tell me what to do thx in advance
LINK >>http://www.youtube.com/watch?v=N64d_5ods5g
my kernel is notecore v12
ICS 4.0.4
cleanote 4
Click to expand...
Click to collapse
Are using tegrak or set cpu to set cpu speed?
I cannot access youtube link.

Use Notecore's overclocked kernel. And based on variation in speed change voltages using tegrak. it is because each and every individual hardware has different voltage requirements. My earnest advice for you is not to overclock. It may harm your phone in long run.

galaxynotelover said:
on ..
can u help me why i cant over clock my phone??????? every time i overclock my phone it become more slower
and when i set the cpu to 1600 it go back to 800ghz and lock ther pls help i made this video so u can more understand me thx u.. sory for my bad english
...... correct me if im rong. tell me what to do thx in advance
LINK >>http://www.youtube.com/watch?v=N64d_5ods5g
my kernel is notecore v12
ICS 4.0.4
cleanote 4
Click to expand...
Click to collapse
Akilesh said:
Use Notecore's overclocked kernel. And based on variation in speed change voltages using tegrak. it is because each and every individual hardware has different voltage requirements. My earnest advice for you is not to overclock. It may harm your phone in long run.
Click to expand...
Click to collapse
Btw which kernel version did you use ..standar or overclock one? maybe your phone chip cannot handle that freqency (1600 mhz) in constant time or maybe your cpu in high temp and adjust to the safe speed (800 mhz) so won't harm the chip..just try the normal max speed if you use the standar version and see if make a diff result
and +1 with Akilesh said about hardware has different voltage requirements

try different scheduler/governator combo
Sent from my GT-N7000 using Tapatalk 2

I still don't understand why the f**k the Niue soul be overclocked
---------- Post added at 02:03 AM ---------- Previous post was at 02:01 AM ----------
*note should

[Q] Overclock question :

Hey i just flashed the Explosion rom 2.1 and its fking awesome , can anyone tell me where can i see if i have an overclocked cpu ,cuz when i join to hardware informations it still says 600MHz

try using setcpu application ...download from play store...phone must be rooted to use it...