Related
Please read my post on page TWO for the solution...
Has any one actually succeeded in connecting their TyTN II (Kaiser) to a VW phone prep (Nokia HT-2)?
I have connected and the phone works perfect, except I can not get the phone book to transfer to the car. If I try to send it manually and send as a vCard I can read the card but not save it down. I have tried using Jetware but to no avail (unless I got the settings wrong!).
Anyone else suffering from the same thing or can shine a light on a resolution?
Mark.
are you talking hardwire or BT.
I have the BT module in my A3, no issues from day one..
lcohen999 said:
are you talking hardwire or BT.
I have the BT module in my A3, no issues from day one..
Click to expand...
Click to collapse
I'm using BT - the phone itself works fine and it connects using rSAP perfect, except it will not download the phone book.
I would take the VW in, see if there is a software upgrade.
I have paired a Razr, 6700 (CDMA) Tytn and a Tytn II to my A3, and the phone book downloaded every one except the CDMA 6700
mjed2006 said:
Has any one actually succeeded in connecting their TyTN II (Kaiser) to a VW phone prep (Nokia HT-2)?
I have connected and the phone works perfect, except I can not get the phone book to transfer to the car. If I try to send it manually and send as a vCard I can read the card but not save it down. I have tried using Jetware but to no avail (unless I got the settings wrong!).
Anyone else suffering from the same thing or can shine a light on a resolution?
Mark.
Click to expand...
Click to collapse
Have you enabled/ticked remote sim access in the bluetooth settings menu on the TYTN II?
lcohen999 said:
I would take the VW in, see if there is a software upgrade.
Click to expand...
Click to collapse
I have contacted my local VW and they don't know of any software upgrade. They are going to ask VW but thinks we may get a negative answer back as the phone is not on their supported phone list.
bluchrome said:
Have you enabled/ticked remote sim access in the bluetooth settings menu on the TYTN II?
Click to expand...
Click to collapse
Yes - As I said earlier the phone connects and works perfectly with the car - except for the phone book not being downloaded.
mjed2006 said:
Has any one actually succeeded in connecting their TyTN II (Kaiser) to a VW phone prep (Nokia HT-2)?
Click to expand...
Click to collapse
This may be a problem specifically to the HT-2, unless the Audi version is the same hardware. I don't have a VW, but do have an older Nokia rsap carkit (610) and that will work fine for sending / receiving calls and texts, but will not copy the text back to the phone. For contacts, it will read ones off the SIM, but refused to read the contacts from the main memory. As an experiment, try storing a couple of numbers on the SIM, then set the HT-2 to only download SIM contacts (if possible) and see if that works...least then you will know if it's all contacts, or only the main memory ones.
Thanks Steve
Already tried that - it will take contacts off the sim - all communication with the sim works just as it should - it just wont play ball with the phone book.
Maybe thats the only option available to you?have the SIM as full as possible with all the main numbers you are likely to call when in the car,then maybe hae a holder for the tytn say a brodit cradle on a dashmount so you can acces other contacts.
Tom Williams said:
Maybe thats the only option available to you?have the SIM as full as possible with all the main numbers you are likely to call when in the car,then maybe hae a holder for the tytn say a brodit cradle on a dashmount so you can acces other contacts.
Click to expand...
Click to collapse
I've just got the Brodit holder ready to go in. (As the Car Phone takes over the use of the SIM from the TyTN, I will not be able to dial out with the TyTN - only look up the numbers so I would have to key them into the Car Phone).
The thing I don't like about using the SIM is it fills the TyTN phone book with really poor quality contacts (and I don't mean the people them selves ) but creates duplicates or even triplicates as the SIM only holds one number per name and some contacts have home, mobile and even work plus the original sync entry from my exchange server.
Its really annoying as it works perfect with my Nokia N95 and I got fed up with the symbian OS short comings trying to connect to MS exchange etc. - that's why I now have the TyTN.
One day we might be able to get it to work....!
the symbian OS has a mail for exchange client that should run on the N95 which you plug in all your exchange server details etc.
Tom Williams said:
the symbian OS has a mail for exchange client that should run on the N95 which you plug in all your exchange server details etc.
Click to expand...
Click to collapse
Thanks Tom. Yes it has and it does, but as with all things that use a 'middle ware' its not a seamless as the real thing. The way in which the HTC will communicate with my server is as near to perfect as its going to get and the ease of entering data and using the calender on the HTC is (in my opinion) much easier.
I upgraded from the N95 to the HTC to get what I thought was a better business phone and that I think is what I got - except for this damn phone book...!
mjed2006 said:
Thanks Steve
Already tried that - it will take contacts off the sim - all communication with the sim works just as it should - it just wont play ball with the phone book.
Click to expand...
Click to collapse
Then I think you'll find that's the incompatibility of the Nokia carkit and Windows mobile. I tried my carkit with a Nokia 6230i and everything is seamless.
Personally I blame Nokia, since they are known to have taken the 'open' bluetooth standard and made it somewhat propriatary on their devices. For example a headset that just worked fine on a very old Ericsson (possibly one of the first bluetooth headsets, and phones), fine on both my HTC devices, refuses to work at all with a Nokia 6310, 6230 and only partially with a 6230i, as in it worked when it felt like and the wind was blowing in the right direction. I've found several bluetooth devices that do this. Look at the bright side though, at least it works for voice calls fine! My old HTC phone would pair up nicely, but unless you left it doing something (like playing music on silent) it would powerdown and disconnect after 20 mins, regardless of being in a call or not. It also required a soft reset after I turned the ignition off, but before the carkit disconected, otherwise the phone would know it was disconnected but refuse to reactive its own phone unless I went into comm manager, pressed the phone icon 3 times (waiting for it to try to power up each time), then soft reset, then switch the phone on again. It got old quickly...and no, the jetware software you can get didn't help.
try this
Make sure that your phone numbers have no symbols other than (, ), or -. Remove all other letters and symbols like p, x, extension, *, etc.
This worked to connect to my Parrot.
Sorted - The Answer...!
OK - not the perfect solution, but at least it works.
1. Pair the TyTN II to the car (Nokia HT-2) phone.
2. Switch car ignition OFF and switch off TyTN II.
3. Remove SIM from TyTN II.
4. Place SIM into a compatible phone (in my case Nokia N95).
5. Switch on N95, switch on Bluetooth, switch on Remote SIM access.
6. Change the Bluetooth ID name on the N95 to the same as the TyTN II.
7. Make phone discoverable via Bluetooth.
8. Switch on car ignition - car phone will not be able to connect.
9. Using car controls search for new device.
10. When N95 is found, select connect, it will use the same user profile as the TyTN II (if you selected the same name for the Bluetooth ID).
11. On the car browse to Settings - Phonebook - Update, this will then import all your contacts from your N95 (or compatible phone).
12. Switch off ignition and switch off N95.
13. Replace SIM back to TyTN II.
14. Ensure TyTN II Bluetooth is ON, Remote SIM is ON and the phone is Discoverable.
15. Switch on car ignition - car phone will not be able to connect.
16. Using car controls search for new device.
17. When TyTN II is found, select connect, it will use the same user profile as before.
18. Now browse the car Phonebook as normal - All your contacts are now available for you to use.
19. Don't forget to turn off discoverability on the TyTN II and to rename your compatible phone (N95) to prevent any future conflicts.
This worked for me! I hope it will work for you! Good Luck!
mjed2006 said:
OK - not the perfect solution, but at least it works.
1. Pair the TyTN II to the car (Nokia HT-2) phone.
<SNIP>
19. Don't forget to turn off discoverability on the TyTN II and to rename your compatible phone (N95) to prevent any future conflicts.
This worked for me! I hope it will work for you! Good Luck!
Click to expand...
Click to collapse
Crikey! And I thought I had to jump through hoops! Well done on finding a solution..how on earth did you come up with it?!
Although this works for now what happens when you add new contacts?
Tom Williams said:
Although this works for now what happens when you add new contacts?
Click to expand...
Click to collapse
You'll have to add it in the same way using the compatible phone - a pain I know (especially if you have a high rate of turnover of friends etc!). But at least its better than using the TyTN as a telephone directory stuck in a Brodit holder!
The numbers are in the car phone and the TyTN is prepared to talk to it - best solution to date! If someone can better it, please do. I for one will be greatfull.
mjed2006 said:
Please read my post on page TWO for the solution...
Has any one actually succeeded in connecting their TyTN II (Kaiser) to a VW phone prep (Nokia HT-2)?
I have connected and the phone works perfect, except I can not get the phone book to transfer to the car. If I try to send it manually and send as a vCard I can read the card but not save it down. I have tried using Jetware but to no avail (unless I got the settings wrong!).
Anyone else suffering from the same thing or can shine a light on a resolution?
Mark.
Click to expand...
Click to collapse
Can anyone tell me if the HT-2 phone preparation is called "Premium Bluetooth"?
I've read all the VW forums and no one can tell me if Vw's "Premium Bluetooth" module (5N0 035 730) is dual band 800/1900 or quad band 800/850/1800/1900.
I'd like to purchase one because I have an rSAP compatible phone but I live in the U.S. and we only have GSM850/1900 frequencies.
Also, does anyone know if the module downloads phonebook contacts in stored on the phone's memory (not the SIM)? In other words does it have Phone Book Access Profile (PBAP)? Additionally, if it has PBAP, is it PBAP/PSE or PBAP/PCE?
One last question...does the "Basic Bluetooth" aka "Bluetooth Audio" (3C0 035 729) the kind everyone gets from Skoda support PBAP? If so which type of PBAP does it support - most new phones with PBAP only support PSE.
Any photos of the labels from both of these would be great. I especially need a close-up of the "Premium Bluetooth" unit I can't make out what is says under "NOKIA" - if it's a Nokia-specific code I could get some definitive answers from them.
Thanks!
i HAVE A KAISER TILT ALSO KNOW AS ATT TILT AND AM HAVING TROUBLE DOWNLOADING MY CONTACTS TO MY NOKIA BLUETOOTH CAR KIT HAS ANY ONE HAVE ANY TROUBLE DOWNLOADING THERE CONTACT LIST IS THERE ANY SOFTWARE I NEED TO ADD TO THE PHONE. I TRIED USING AN APPLICATION CALLED JETWARE WHICH WILL ALLOW ME TO DOWNLOAD BUT WHEN I MAKE A CALL IT WONT ALLOW ME TO HANG-UP THE CALL. ANY HELP WOULD BE GREATLY APPRECIATED.
First, STOP YELLING !!
Second, try using the enter key sometimes.
Third, i didn't read your post, can't help ya, sorry.
anaethelion said:
First, STOP YELLING !!
Second, try using the enter key sometimes.
Third, i didn't read your post, can't help ya, sorry.
Click to expand...
Click to collapse
dude? why?
hey man sorry that guy was such a jerk dont want that to be your first expericne here as long as you search before asking most people will be more then willing to help you. sorry i cant help ya though. my only guess is maybe did you install a wm 6.1 rom? they have some probems with bluetooth but i dont think thats it
Did you try it without Jetware? Made sure your bluetooth was set as discoverable? Paired the device? The more info YOU provide as to what you've done, tried, & what setup you've done it with...the beter the help & answers you'll get.
I'd suggest filtering through the following threads. There have been similar problems fixed:
http://forum.xda-developers.com/showthread.php?t=364559&highlight=Kaiser+Nokia+car+kit
In the above thread the original poster solved his nokia carkit issue following this:
1. Pair the TyTN II to the car (Nokia HT-2) phone.
2. Switch car ignition OFF and switch off TyTN II.
3. Remove SIM from TyTN II.
4. Place SIM into a compatible phone (in my case Nokia N95).
5. Switch on N95, switch on Bluetooth, switch on Remote SIM access.
6. Change the Bluetooth ID name on the N95 to the same as the TyTN II.
7. Make phone discoverable via Bluetooth.
8. Switch on car ignition - car phone will not be able to connect.
9. Using car controls search for new device.
10. When N95 is found, select connect, it will use the same user profile as the TyTN II (if you selected the same name for the Bluetooth ID).
11. On the car browse to Settings - Phonebook - Update, this will then import all your contacts from your N95 (or compatible phone).
12. Switch off ignition and switch off N95.
13. Replace SIM back to TyTN II.
14. Ensure TyTN II Bluetooth is ON, Remote SIM is ON and the phone is Discoverable.
15. Switch on car ignition - car phone will not be able to connect.
16. Using car controls search for new device.
17. When TyTN II is found, select connect, it will use the same user profile as before.
18. Now browse the car Phonebook as normal - All your contacts are now available for you to use.
19. Don't forget to turn off discoverability on the TyTN II and to rename your compatible phone (N95) to prevent any future conflicts.
This worked for me! I hope it will work for you! Good Luck!
I did try it with removing the jetware the bluetooth works fine but cant download contacts is there anyother patch or software more compatable with nokia bluetooth devices. Jet ware is good but wont let me disconect call when done any one else have an issue like this
BOBBYDS1 is your connection between the Kaiser and the Car Kit using Bluetooth as a headset (in other words the phone still functions and you can look up and dial with the phone) or is it using rSAP (Remote Sim) which switches your Kaiser into flight mode.
I ask this as it will determine which way you look for a solution. If its using rSAP then most Nokia systems that are fitted into cars as factory fit have not yet developed the correct software to communicate with Windows Mobile devices, in which case you will need to remove Jetware from you Kaiser and use my solution on a previous post as quoted above.
http://forum.xda-developers.com/show...+Nokia+car+kit
Mark
The phone still functions as i can disconnect by the phone it self here is the thing sometimes I can disconnect call by the nokia bluetooth device but a lot of times I cannot disconnect, i have to pull phone out of my pocket and end call
@BOBBYDS1 and fb.knight
No offence guys, but you need to go back to Junior High and learn how to use commas, question marks and letter cases.
Posts like that will rarely get you any kind of a reasonable response.
what nokia bluetooth car kit are you trying to use?
Still not clear if your carkit is using headset or rSAP profiles. Can you either tell us the model of the carkit, or tell us if you can browse the internet from the phone whilst its connected to the carkit?
Punctuation good enough there Dark?! (JOKE!!)
IT is a Nokia CK15-w Bluetooth Car kit Here is a link to it. http://www.nokiausa.com/A4431279
Also I can surf the internet while it is connected to the bluetooth.
Looks like that model supports:
Hands-free Profile 1.5, Phonebook Access Profile 1.0
(Source: Nokia Europe
The Kaiser supports:
File Transfer Profile, SIM Access Profile (rSAP), Dial-Up Networking Profile, Personal Area Networking Profile, Hands-Free Profile 1.5, Advanced Audio Distribution Profile (I'm guessing A2DP)
(Source: www.theunwired.net
So I'm guessing that whilst it will work as a glorified headset, you have no chance of getting your contacts downloaded! Should be able to get them from your SIM, just not the main memory. Wonder why Nokia removed the rSAP profile? It was on their 610 (rSAP only) 616 (rSAP and Handsfree) then from the 810 and CK-15 it seems to be handsfree only. This could be why so many are having problems with Nokia carkits, Nokia went and changed the supported bluetooth profiles. Funny, I would have thought the newer the model, the more it would have done, but I guess not! Glad I looked into this as I was thinking about 'upgrading' to the 810 for the full handset, guess I won't be now!
I am getting confused, I downloaded the jetstream program to the phone and was able to download the contact list no problem. The problem i am having is when i make a call from the nokia bluetooth when I am done and hit the endcall button on the nokia it does not end the call, I have to pull out the phone and hit the end button on the phone itself. any suggestions on how to correct this.
BOBBYDS1 said:
I am getting confused,
Click to expand...
Click to collapse
Not as much as everyone else reading your post and trying to help!
BOBBYDS1 said:
AM HAVING TROUBLE DOWNLOADING MY CONTACTS
Click to expand...
Click to collapse
BOBBYDS1 said:
ANY ONE HAVE ANY TROUBLE DOWNLOADING THERE CONTACT LIST
Click to expand...
Click to collapse
BOBBYDS1 said:
I TRIED USING AN APPLICATION CALLED JETWARE WHICH WILL ALLOW ME TO DOWNLOAD BUT WHEN I MAKE A CALL IT WONT ALLOW ME TO HANG-UP THE CALL.
Click to expand...
Click to collapse
BOBBYDS1 said:
removing the jetware the bluetooth works fine but cant download contacts
Click to expand...
Click to collapse
So downloading contacts isn't your problem, hanging up whilst having jetware installed is? Better post would have been something along the lines of:
"I'm having trouble ending calls on my Kaiser using the end button on my Nokia CK-15 carkit. I installed the Jetware program to enable downloading contacts, but this stops the end key working on the Kaiser, before this it was working fine just the carkit couldn't download contacts. Does anyone know of any settings in Jetware I can try, that would restore the end key function, or other software that would still enable me to download contacts and have and end key?" - That might have got you an answer sooner...
Right, the phone as it comes doesn't support phonebook access, thus you won't be able to download your contacts. Actually, none of the Nokia bluetooth carkits support downloading contacts from the internal memory of a Windows Mobile device, probably because no Nokia uses Windows Mobile (yet).
You add something like Jetware which gives you the ability to access the phonebook, but then you are unable to end a call via the carkit. My best guess is Jetware does something which interupts the commands from the carkit. I'm also guessing your stuck with either having contacts download or and end call option. Add Jetware back and play with it's settings. You may get lucky. However bluetooth is very buggy and the only way to get 2 devices to work perfectly with eachother without running the risk of having to fiddle or loose something is to buy them from the same manufacturer and check they are fully compatible with eachother. Two devices from 2 manufacturers don't always work.
Here are some examples:
Old Ericsson headset, will work perfectly with my old HTC phone and can't even be seen by my Kaiser. Slightly newer one (that has an LCD for caller ID) will work once connected until I switch it off, then requires the old HTC phone to be soft reset before it will connect again. Works perfectly with the Kaiser. Brand new, cheapy Motorola headset does what it feels like with no consistency on my older HTC, again works perfectly on the Kaiser. My Nokia 610 carkit will connect to both phones, but whilst the older phone needs to be soft reset before turning off the ignition (otherwise the phone part of things crashes), the Kaiser will connect and disconnect just as Nokia intend. The carkit will only download SIM contacts. The fix posted above isn't really a fix, it's fooling the carkit into thinking that another phone (the Nokia N95) is the kaiser, downloading the contacts from it and then reconnecting the real Kaiser. Not a fix, but a brilliant workaround.
Also noticed that the CK-15 uses bluetooth version 1.2, the Kaiser bluetooth version 2. This might be something to do with it.
In short, I think you will have to live with either a phonebook, or an end function. Welcome to the wonderful world of bluetooth. It also doesn't help that Nokia hasa a history of making devices which don't work with anything other than another Nokia device...
Is there any way to change the kaiser to use bluetooth 1.2. Also is there a way to contact jetware besides email as they dont reply.
In your reply you state thAT Nokia devices csnt download from internal memory of kaiser phone, how can i set it up to download from the sim is there a way.
BOBBYDS1 said:
Is there any way to change the kaiser to use bluetooth 1.2
Click to expand...
Click to collapse
I seriously doubt anyone will be writing a bluetooth stack v1.2 for the Kaiser anytime soon. I also have a feeling that the versions are hardware, not software related, so its impossible. I think you may have to accept that the Kaiser and Nokia will never play nicely. Why don't you install Jetware, sync your contacts, then either disable it (I'm sure I remember an option in the settings when I tried it previously) or just delete the program? You could keep the installer cab on your device somewhere as its only 500kb for when you need to reinstall it?
If there isn't a phone number on the jetware homepage, I'm betting you can't call them. But I did notice there is an advanced set-up options menu. Did you try unchecking all the boxes apart from phonebooks? If the "hang-up/swap to incomming call" option is unchecked, Jetware should pass that command to the phones standard bluetooth software and give you back your end key. From the Jetware site:
"When this option is unchecked the Extension will allow hang up commands to be processed by the built-in code, which will disconnect all active voice calls."
If it's currently checked, try unchecking it.
BOBBYDS1 said:
In your reply you state thAT Nokia devices csnt download from internal memory of kaiser phone, how can i set it up to download from the sim is there a way.
Click to expand...
Click to collapse
Have you read the manual? In my 610 manual, it tells me I can choose to dowload phone, SIM, or phone and SIM memory. Does yours?
Now it seems that call waiting is not working in the bluetooth unit, itried the settings both ways in jetware but still no go. any ideas
Steve-C said:
Still not clear if your carkit is using headset or rSAP profiles. Can you either tell us the model of the carkit, or tell us if you can browse the internet from the phone whilst its connected to the carkit?
Punctuation good enough there Dark?! (JOKE!!)
Click to expand...
Click to collapse
Well, since you asked, it should be 'it's', not 'its'.
Leave phone in pocket.
Mount galaxy tab to dashboard of car.
take phone calls though galaxy tab hardwired into car audio system with external mic.
possible?
Leave phone in pocket. <-- YES
Mount galaxy tab to dashboard of car. <-- YES
take phone calls though galaxy tab hardwired into car audio system with external mic. <-- YES
I use Plantronics Bluetooth ear piece, works great, also there is a free app that allows for ALL audio from the SGT to be forced out the BT.
agreed very much possible. BT headset im using is Hisense HB200S connected to 2 of my phones at the same time.
Not really what I was thinking of. I'm saying use the tablet as a bluetooth headset. So when i jump in the car phone calls are automatically routed from my phone into the tablet which is hooked up to the audio system of my car.
so it would essentially function as a really nice car stereo but have all the added functionality of a android tablet.
data through bluetooth would be super awesome, but this is kinda shooting for the stars.
Did you find any solution?
UP
I'd love to see this too. Basically have sms and calling features on my tab, going through my phone via bluetooth.
anybody found a solution?
i have a carpc an since androidX86 (4.0.3) is out it would be great to use this as bluetooth handsfree.
i agree
split2th said:
I'd love to see this too. Basically have sms and calling features on my tab, going through my phone via bluetooth.
Click to expand...
Click to collapse
I 100% agree, I need this feature as well. We clearly are not the only ones. This essentially is centered around someone with development skills using the Bluetooth Headset Profile to have the tablet show up as bluetooth headset or handsfree to the phone.
With that it'd be great for it to pull contacts (if you dont sync contacts with google), receive texts, receive calls, dial, voice dial, etc. Out of all those, i really just want to be able to receive calls and have them routed to the tab. Everything else is a bonus.
Should we start a bounty?
Let's do..whatever, to make this happen! I would pay!
Pioneer navigation in my car can do it but I want to replace it with android. This is the only reason why I can't do it.
Closest thing i've been able to do for this is my phone is connected via bluetooth to my cars head unit. My tablet it mounted and connected to the head unit with 1/8" - 1/8" This way i can use my tablet for music and navigation and if i get a call my system will auto switch over for the call.
MarcR727 said:
Closest thing i've been able to do for this is my phone is connected via bluetooth to my cars head unit. My tablet it mounted and connected to the head unit with 1/8" - 1/8" This way i can use my tablet for music and navigation and if i get a call my system will auto switch over for the call.
Click to expand...
Click to collapse
thanks for that info, but in my case I won't have a headunit to act as the "middleman". we really need the option of the tablet itself being able to exploit the Bluetooth handsfree profile
Sent from my GT-P6210 using XDA Premium HD app
Tablet Talk 1.3.3.1 was released on 4/15 with a Call Sharing option over Bluetooth or Wifi. The feature is still in beta, but from my limited usage in the past 2 days, it seems like a viable solution to this problem. The app can be found in the market with a reasonable price tag of $2.99. For those of you looking for a carputer solution - you found it.
i actually use Tablet Talk and fully support that developer for his work, BUT the call answering feature requires either the phones speaker phone to be on or a bluetooth handsfree kit or bluetooth headset in order to work. It's not the same as the subject of this thread but it is the closest we have so far.
I've been in talks with him and he's still working on the BT stack in his spare time but makes no promises that it'll work or make it into his app.
Hi,
i 'm looking for the same possibilities, but from my iphone=>Tab=>Car-audio
TabletTalk doesn't work with iphone
What would be great is a full application on the Tab with Dialing, Contact List from the phone, the same as every caraudio BT sold nowadays...
I don't understand why it 's link to the Phone OS, because a Pioneer Car Audio BT doesn't care if it s a BB, Nokia, iphone, or an android phone : it's just A2DP/Handset server mode...
I succeeded in sharing my iphone music librairie and 3G to the tab, there 's only the phone part left :/
correction, i can't acces my iphone music lib from the tablett
i can only acces to a itune on a PC, but not directly to the iphone
I don't understand why there is no Car Audio App available, the developer would be rich !
Thank you guys, I've been looking for this for my – project for some time. Can't wait to try it out this weekend.
Sent from my highly modified HTC Rezound using Tapa 2. Yes, Swype misspelled something above.
I'm also on the hunt for the same thing, please report back if anyone finds a solution.
Same here i have been wanting to do this but with my cheap pos phone
Lg VX9200 has bluetooth and works fine with my headphones with music and calls
Android only sees it as a internet source i just want to use my tablet as a speaker phone with a big key pad
Or maybe even use google contacts and have it dial my phone
Sent from my Transformer TF101 using Tapatalk 2
Bump to keep this thread going I'll be attempting something similar in the future
This would be amazing, but unfortunately the tablet talk app will not work because it requires your car audio to be wired through your phone which would defeat the purpose. I hope the tablet talk developers can figure something out!
I have an older car (2004 BMW 330ci) with built-in factory bluetooth. All of my previous smartphones would connect to it with varying degrees of success. Because of this variation, I believe the car's bluetooth system to be "less than universal" as far as compatibility is concerned. The problem is, my new HTC One is all but useless with it! The volume during calls is barely above a whisper, and callers report that they can barely hear me. Also, while it hasn't disconnected any calls, outside of a call the phone alternatively displays " bluetooth connected" and " bluetooth disconnected", cycling about every 10 seconds.
From previous experience, I know there's a significant software component to compatibility with this system. For example my stock Nexus S 4G would connect and work well but would occasionally drop the connection. But then the paranoid android rom on the same phone would not only never drop a connection, it would transmit sms text messages and my contacts directory to the car as well. No other phone or rom has done that.
So.. some questions...
1.) Anyone else having this problem? If so, what kind of vehicle?
2.) Any other BMW drivers not having this problem with the HTC One? If so, year and model?
3.) This is probably an ignorant "noobish" one, but... is it possible to extract the bluetooth software from the nexus paranoid android rom and bring it over to the HTC One?
4.) Know of any HTC One roms that make changes to the bluetooth software?
5.) Any other advice you can give that may help?
I've tried Volume+ to no avail. Version 1.9 states it isn't fully compatible with the One's android version, and version 2.0 alpha doesn't yet have bluetooth functionality.
Thanks for your help! If I discover a solution, I'll post an update.
ECUmd2b said:
I have an older car (2004 BMW 330ci) with built-in factory bluetooth. All of my previous smartphones would connect to it with varying degrees of success. Because of this variation, I believe the car's bluetooth system to be "less than universal" as far as compatibility is concerned. The problem is, my new HTC One is all but useless with it! The volume during calls is barely above a whisper, and callers report that they can barely hear me. Also, while it hasn't disconnected any calls, outside of a call the phone alternatively displays " bluetooth connected" and " bluetooth disconnected", cycling about every 10 seconds.
From previous experience, I know there's a significant software component to compatibility with this system. For example my stock Nexus S 4G would connect and work well but would occasionally drop the connection. But then the paranoid android rom on the same phone would not only never drop a connection, it would transmit sms text messages and my contacts directory to the car as well. No other phone or rom has done that.
So.. some questions...
1.) Anyone else having this problem? If so, what kind of vehicle?
2.) Any other BMW drivers not having this problem with the HTC One? If so, year and model?
3.) This is probably an ignorant "noobish" one, but... is it possible to extract the bluetooth software from the nexus paranoid android rom and bring it over to the HTC One?
4.) Know of any HTC One roms that make changes to the bluetooth software?
5.) Any other advice you can give that may help?
I've tried Volume+ to no avail. Version 1.9 states it isn't fully compatible with the One's android version, and version 2.0 alpha doesn't yet have bluetooth functionality.
Thanks for your help! If I discover a solution, I'll post an update.
Click to expand...
Click to collapse
Hi,
I have a 2006 bmw z4 (e85) and I'm having exactly the same problem with sound level via bluetooth.
My previous phones (htc sensation xe and htc touch pro 2) worked flawlessly with the car
I would also love to find a solution to it, because there's no bluetooth firmware upgrade available at BMW's..
Same issue, but it only arose with the 4.3 update. Before that Bluetooth had other issues even recognizing my stereo, now it connects flawlessly but cycles the "Connected" and "Disconnected" message every couple seconds. 2006 avalon, but with custom stereo and system.
I think that one's bluetooth stack uses some different compression method than sensation. I dont know whether its some kind of codec or encryption method, because system sounds are loud and clear and a person's voice is quiet and with some interference.
Hope that someone will find a solution to this problem - probably downgrading bluetooth stack would solve the problem
TapaTalking
I have a similar problem with my Acer Liquid E2 duo phone connecting to Dension 500S BT kit installed in my Audi. It works all fine when I place a call from the phone. But if I dial from my media interface, i get a very low call volume and adjustment using the car volume control doesn't work any more.
A little thread revival
After upgraiding my htc one to android 4.4 kitkat the problem is partially solved, meaning the bluetooth volume is slightly higher, but only slightly - still cannot get a clear loud sound I used to have while using htc sensation with stock ICS.
Any luck with you, guys?
TapaTalking
Try Viper4Android, you must be rooted tho.
http://forum.xda-developers.com/showthread.php?t=2191223
Sent from my HTCONE using Tapatalk 2
ECUmd2b said:
I have an older car (2004 BMW 330ci) with built-in factory bluetooth. All of my previous smartphones would connect to it with varying degrees of success. Because of this variation, I believe the car's bluetooth system to be "less than universal" as far as compatibility is concerned. The problem is, my new HTC One is all but useless with it! The volume during calls is barely above a whisper, and callers report that they can barely hear me. Also, while it hasn't disconnected any calls, outside of a call the phone alternatively displays " bluetooth connected" and " bluetooth disconnected", cycling about every 10 seconds.
From previous experience, I know there's a significant software component to compatibility with this system. For example my stock Nexus S 4G would connect and work well but would occasionally drop the connection. But then the paranoid android rom on the same phone would not only never drop a connection, it would transmit sms text messages and my contacts directory to the car as well. No other phone or rom has done that.
So.. some questions...
1.) Anyone else having this problem? If so, what kind of vehicle?
2.) Any other BMW drivers not having this problem with the HTC One? If so, year and model?
3.) This is probably an ignorant "noobish" one, but... is it possible to extract the bluetooth software from the nexus paranoid android rom and bring it over to the HTC One?
4.) Know of any HTC One roms that make changes to the bluetooth software?
5.) Any other advice you can give that may help?
I've tried Volume+ to no avail. Version 1.9 states it isn't fully compatible with the One's android version, and version 2.0 alpha doesn't yet have bluetooth functionality.
Thanks for your help! If I discover a solution, I'll post an update.
Click to expand...
Click to collapse
any fixes to this problem yet ??
Try using "HTC car" app
I had the same problem for six months and just found a solution that works for me.
I just found out that the HTC One Bluetooth audio connection (A2DP) plays with a very different volume depending on whether the "HTC car" app is active or not.
For six months I have been playing music daily in my car using HTC One (media app: Qobuz) as source and Bluetooth as connection. The source volume was very low, so that I had to keep the audio car audio system near maximum level. Eventually, this abnormal use of my car audio system destroyed it: I had to replace the receiver, and may have to replace the speakers too.
Only this morning, after six months, I found out that when launching the media app from within the "HTC car" app, the output volume is much louder, and I can set the receiver's volume at a normal level.
I guess HTC does this to prevent ear damage when the One is connected to a Bluetooth headset. Great, but they should mention it in the HTC One user instructions, or at least on their website! It destroyed my car audio system!!
HTC One (M7)
Android 4.4.2
HTC Sense 6.0
Stock ROM
Rooted
In my case car mode doesnt solve the problem - its a bluetooth compatibility issue I suppose
TapaTalking
I wanted to share how to solve the problem of using bluetooth on a second phone having another mobile already connected to Android car.
The easiest solution would be to use a duplicate of the Sim card, but in my case my telephone company does not have that service and cannot be hired.
As you know, at the moment that a mobile phone connects to Android car, it no longer allows us to pair a second phone and use it to make calls via bluetooth, forcing us if we want to make calls to use the one that is connected by USB to Android car.
Well, using an application we can disable the sharing services by bluetooh and thus be able to use the 2nd phone. The negative part is that it is necessary that the mobile is broken.
The name of the application is: Service Disabler https://play.google.com/store/apps/details?id=com.kunkunsoft.rootservicedisabler&hl=en
“IT DOES NOT HAVE THE PHONE WITH ROOT”
To deactivate all the services of sharing via bluetooth is easy, we open the application and type the word bluetooth in the search area and it will already be in the list, and now it is just click on it and we will leave the option to deactivate everything.
From this moment on, all audio from the connected phone will be through USB.
Video:
https://www.youtube.com/watch?v=h77mkaUca0U
This isn't really an Android Auto issue. But I understand a workaround may be useful if you have a headunit with this limitation.
How many phones can be connected depends on the headunit. My Kenwood will allow two phones to be connected and both can answer and make calls. Usually, I have my Pixel connected via AA, and my wife's iPhone will connect via Bluetooth at the same time. I can even select Bluetooth on the headunit and play music from the iPhone. In fact, although only two phones can be connected for calls, it will allow up to 5 phones to be connected at the same time for music (I've never tried that many, though).
mike.s said:
This isn't really an Android Auto issue. But I understand a workaround may be useful if you have a headunit with this limitation.
How many phones can be connected depends on the headunit. My Kenwood will allow two phones to be connected and both can answer and make calls. Usually, I have my Pixel connected via AA, and my wife's iPhone will connect via Bluetooth at the same time. I can even select Bluetooth on the headunit and play music from the iPhone. In fact, although only two phones can be connected for calls, it will allow up to 5 phones to be connected at the same time for music (I've never tried that many, though).
Click to expand...
Click to collapse
The VAG group has this problem, I hope that the solution in some update.
juanmontequinto said:
The VAG group has this problem, I hope that the solution in some update.
Click to expand...
Click to collapse
Most cars have this problem. I think is very useful, i will implement it. It may be easiest solution. Phone has root to work mirroring so, probably with freeze bluetooth with titanium, could have the same, but havent try it yet..