Related
Hey guys, I am new to here so i could not post on the dedicated thread created by supercurio.
I am using P990 and have just flashed a voodoo-powered kernel on it, after that i downloaded voodoo sound from Google Play.
The sound was nice, but a Volume Bug comes along.
Here's my settings
- Kernel: 2.6.32.55-cyanogenmod [email protected] #1 (which i downloaded from XDA)
- ROM: official CM 7.2
- Voodoo setting: volume limit set at -25dB, smart amplifier doesn't matter.
The bug happens when:
Step 1) Stop all music (No matter which player using, I had tried the original android and Poweramp)
Step 2) Go to launcher homepage
Step 3) Use the physical volume button to adjust the loudness
Step 4) Go back to music player, play!
Step 5) BUG COME, the volume is extremely high!!!!!Sound like at -10dB, but i set limit to -25dB
Step 6) Press volume- once, the volume returns to normal level (max at -25dB)
Thanks all for your attention, I could not say for sure it is a bug. Let me know if it is only my phone's problem.
Also when a notification sound is played the volume is set to maximum.
Has been there forever.
My workaround:
Set phone to silent when listening to music.
derEremit said:
Also when a notification sound is played the volume is set to maximum.
Has been there forever.
My workaround:
Set phone to silent when listening to music.
Click to expand...
Click to collapse
You means you has my problem too？
I think it might be the same problem. And the one i described has been there since voodoo sound first came out
Sent from my Nexus 7 using Tapatalk HD
This is completely compatible with the official CyanogenMod 10.1 (and I'm planning to keep it that way), so you can switch to and from official without any problems.
The main focus of this ROM is to stay up to date with CyanogenMod 10.1 git branch and add features that allow finer grain customisation of hardware specific to the 4X.
What's added:
LG QuickMemo (hold Vol+ and Vol- to activate) [framework change]
Enable wake by pressing volume key setting [settings app change]
Control button backlight in System Settings (can stop it turning on whenever you touch the screen) [settings app + framework + hardware library change]
Button backlight used as notification light (can be enabled/disabled in System Settings) [settings app + hardware library change]
Button backlight used as battery light (recommend disabling in System Settings) [settings app + hardware library change]
Ability to dim backlight more than minimum (activate from ArararagiToolbox, otherwise like stock) [kernel change]
Ability to force fast charge even higher than default AC levels (activate from ArararagiToolbox, otherwise like stock) [kernel change]
20130502: Fix headset button (thanks to Wenque) Now in official CM
20130505: Disable baseband_xmm_power wake lock [kernel change]
20130512: Torch brightness control. You need to clear data for the Torch app. Default is the minimum possible brightness, rather than the stock CM 10.1 brightness. [Torch app + kernel change]
20130515: Fix known issues in torch brightness control caused by 20130512 changes. Clear Torch app data. [Torch app change] Disable touch debug printing in kernel. [kernel change]
20130602: Use new vibrator implementation in line with CM. Add baseband_xmm_power wake lock back in.
20130609: Uncap screen brightness
20130611: Disable baseband_xmm_power wake lock again. Now using Linaro 13.05 GCC 4.7 to build (user + kernel).
20130612: HALO ported from ParanoidAndroid
20130613.1: OpenPDroid
20130623: Enable ODEX
20130623: Use -O3 for compiling native components
20130623: Increase vibrator PWM duty cycle (should increase vibrator strength)
20130625: Tweak background process parameters
20130630: Add QuickMemo quick settings tile
20130707: Add LG Hidden Menu (only GNSS Test works at the moment)
20130713: Allow control of which backlight HVLEDs are enabled. Lets you make the screen even dimmer
20130716: Allow control of gamma LUT from user space. Let's you over saturate the screen colours
20130727: Add support for external GPS (http://review.cyanogenmod.org/#/q/owner:ich%40morphew.de+status:open,n,z)
Check github for full changelog. Each release also includes changes from official CM.
Optional (can be installed as normal app):
Memobin.apk: LG Notes
AraragiToolbox.apk: Actually activating some of the features mentioned above
CameraApp3.apk: 20130606. LG Jelly Bean stock camera app ported to Android 4.2/CM 10.1.
ArararagiToolbox features that work on any ROM:
Check battery current (drain/charge in mA)
Disable USB (for charging on untrusted computers)
Check KSM (kernel same page merging) stats
Note: Anything changed from AraragiToolbox won't stay across reboots, as it's more of a tool for testing. I'm planning to add them into the System Settings later on.
Install by flashing zip from ClockworkMod (Find "Optimus 4X" on the page). No need to wipe data if you are already using CM 10.1.
Download: cm-10.1-20130727-UNOFFICIAL-p880.zip (md5sum: 99d7acca2d33fcdac8c6faed57f44f0b)
Source: https://github.com/mzhou/arararagi_lge_p880_patches
Planned:
Overclocking, Schedulers, I/O Schedulers, Governors
Vibration strength Make it configurable
Control camera flash/torch brightness
USB mass storage
Fast charge tile
How to HALO:
See http://forum.xda-developers.com/showthread.php?t=2117444&page=976 (Thanks to kubics for original posting and Namor Noditz for linking) on how to configure.
Just mentally replace "Settings > RootBox Settings > HALO Settings" with "Settings > System".
This YouTube video goes through all the gestures: http://www.youtube.com/watch?v=d5WljHcOyXs
can we install only the APK files or we have to flash the unofficial Cm10.1?
donkanmcklaus said:
can we install only the APK files or we have to flash the unofficial Cm10.1?
Click to expand...
Click to collapse
The ROM is needed as it is modded to support the features
Sent from my rooted P880
What happened if I flash official CM10.1 nightly update over it?
LGaljo said:
What happened if I flash official CM10.1 nightly update over it?
Click to expand...
Click to collapse
My immediate guess would be the same as with any modified CM - you lose the additions to the ROM.
SimonTS said:
My immediate guess would be the same as with any modified CM - you lose the additions to the ROM.
Click to expand...
Click to collapse
I think it would change just the moddified files, I guess. I will try an report.
can create a zip file to add QuickMemo, Fast Charge, Backlight Dim, Notification Light, etc. to official CM 10.1?
Black_X said:
can create a zip file to add QuickMemo, Fast Charge, Backlight Dim, Notification Light, etc. to official CM 10.1?
Click to expand...
Click to collapse
+1 i think that will better ... now we will have mess official CM ... and this great fixes ... lot of things to monitor.
LGaljo said:
I think it would change just the moddified files, I guess. I will try an report.
Click to expand...
Click to collapse
It doesn't work. I have installed today's update then this modded ROM and then today's update again.
How often is you going to be updated this ROM?
LGaljo said:
What happened if I flash official CM10.1 nightly update over it?
Click to expand...
Click to collapse
SimonTS said:
My immediate guess would be the same as with any modified CM - you lose the additions to the ROM.
Click to expand...
Click to collapse
LGaljo said:
I think it would change just the moddified files, I guess. I will try an report.
Click to expand...
Click to collapse
LGaljo said:
It doesn't work. I have installed today's update then this modded ROM and then today's update again.
How often is you going to be updated this ROM?
Click to expand...
Click to collapse
Does that mean it did what I suggested and wiped out the additions? That's certainly what used to happen with older versions of CM and I would expect exactly the same to happen still.
It's the same as with the PDroid version - unless the OP sets up his own automated build system you can often find the build lagging behind the nightlies. That's why they often choose to base a modded version on the most recent 'stable' CM and then have to update it less frequently.
I think I found a bug. When I am charging my phone over USB or AC the button's lights are always on.
LGaljo said:
I think I found a bug. When I am charging my phone over USB or AC the button's lights are always on.
Click to expand...
Click to collapse
That's not a bug. You've got the screen set to "Always On" when charging, and the buttons set to "Always On" - therefore the buttons will always be on when charging?
Awesome!!!!This is what i need.Great job!
If qmemo can also turn on by long press menu/quick setting panel,that will be perfect.
LGaljo said:
I think I found a bug. When I am charging my phone over USB or AC the button's lights are always on.
Click to expand...
Click to collapse
The button lights function as battery lights by default. Disable it in settings -> system -> battery lights.
It's difficult to release just modified files (as you can see from my kernel and other QuickMemo thread, it becomes a mess) and now that framework modifications are involved, it can cause conflicts if they are flashed over a CyanogenMod version that it wasn't designed for.
It might be possible to get the button backlight feature upstreamed in CM, but I doubt they'd accept any of the rest.
I'll look into setting up automated build, and also getting the source modifications organised on github or similar.
20130428 is now available.
No changes from me, just updating upstream.
Well nothing changed after I flash this rom. Still cant use the Quickmemo
never_comeback said:
Well nothing changed after I flash this rom. Still cant use the Quickmemo
Click to expand...
Click to collapse
What happens when you try to use it?
Did you hold vol+ and vol- at the same time?
arararagi said:
What happens when you try to use it?
Did you hold vol+ and vol- at the same time?
Click to expand...
Click to collapse
OK I did it, thank you so much. Great effort :good:
Awesome, exactly what I've been looking for, thanks!
20130429 uploaded. Still no changes from me.
I'm thinking of adding an accelerometer spoofer since I'm sick of apps being smart and rotating themselves when I'm uesing my phone on protrait lying in bed.
[SIZE="<font><font>6</font></font>"]MIUI V5 2013.6.28[/SIZE]
[Phone]
Fix - Large square contact photo distortion in incoming call interface
[Themes]
Fix - In some cases, downloaded themes disappear or cannot be used
Fix - Downloading a large amount of themes from the web causes Themes app to FC
[Camera]
Optimisation - When clicking to focus or clicking the menu, QR code button will be hidden
Fix - After scanning QR code, press MI key can still take pictures
Fix - In the photo preview, press the menu button and then quickly slide right to enter camera preview page, white menu will appear at the bottom
Fix - While recording in simple mode, colour effects can still be selected
Fix - Thumbnails not displayed issue
[Music]
Optimisation - Improve efficiency while sliding the song list
Optimisation - While setting ringtone, if not supported format, pop up will display
Fix - For songs which do not support editing ID3, you can manually enter ID3 editing interface
[Browser]
New - Added function for smart loading of pictures
New - When opening browser, prompt whether to open the url from clipboard will pop up with prompt
Optimisation - Improved bookmark history interface
Optimisation - After app installation package download is complete, prompt whether to install or upgrade will pop up.
Fix - While opening browser through third-party apps, multi-window management mode of the browser cannot exit
[File Explorer]
New - Remote management support for Big5 encoding
Fix - Multiple selection editing mode cannot exit after switching directory
Fix - Location error of current directory
[Alarm Clock]
Fix - Alarm and music playback simultaneously
Fix - In some cases, creating a new alarm will cause FC errors
[Transfer]
Optimisation - Error descriptions
Fix - Notifications in the status bar cannot be cancelled
Download Link
Can not publish new external links
MY MSN: [email protected]
[SIZE="<font><font>5</font></font>"]Bugs[/SIZE]
that the low call volume on cm10 has to do with the noise cancelling mic not liking the AOSP drivers
Did you ever get data work in on this bad boy... and... is this a real patchrom port?
Sent from my Vivid 4G using Tapatalk 4 Beta
Whenever I initially flashed this ROM (which I believe is the same one in the development section), I had issues with skipping whenever I was testing ViPER Audio, which I never had before. More than likely it was the fact that MIUI typically runs slower on lower end devices (unless it was the combination of FX + XHiFi), but after I flashed the Sultan Kernel I didn't seem to have any problems with that.
Along with that, I never tested data on the original kernel, but when I ran into the problem on my current kernel I just went to "Access Point Names" and changed it from ATT - wap.cingular to ATT- Phone. That seemed to clear up any connection issues when using data...
But again, that's assuming that both posts contain the same ROM.
Also, thank you for posting this, I've been dying to get my hands on this version for a while now. Seems like the HTC Vivid is starting to regain a bit of momentum again.
Cheers!
sanya_meng said:
[SIZE="<font><font>6</font></font>"]MIUI V5 2013.6.28[/SIZE]
[SIZE="<font><font>5</font></font>"]Bugs[/SIZE]
that the low call volume on cm10 has to do with the noise cancelling mic not liking the AOSP drivers
Click to expand...
Click to collapse
I couldn't get bluetooth to work on this rom (in development section sharing your name on the kernel). I tried Sultan's kernel, and it also didn't have working BT. Anyone else have luck with BT?
haydnlj said:
I couldn't get bluetooth to work on this rom (in development section sharing your name on the kernel). I tried Sultan's kernel, and it also didn't have working BT. Anyone else have luck with BT?
Click to expand...
Click to collapse
It should work now with the new update... I'm on 3.6.21 and everything work fine.
Are you s-on or s-off?
I.tried numerous apps to increase overall external speaker sound several mods nothing has worked was wondering is there something that can b done within the sys registry that will actually send a command to the external speaker to raise the volume.......a script or something .....
diablofuego said:
I.tried numerous apps to increase overall external speaker sound several mods nothing has worked was wondering is there something that can b done within the sys registry that will actually send a command to the external speaker to raise the volume.......a script or something .....
Click to expand...
Click to collapse
What ROM you are running?
Many JB kernels have In-Call Volume options in Advanced settings.
You can't increase the volume above build-in amplifier/speaker limits.
slimbean
Val D. said:
What ROM you are running?
Many JB kernels have In-Call Volume options in Advanced settings.
You can't increase the volume above build-in amplifier/speaker limits.
Click to expand...
Click to collapse
slim bean 4.2.2 build7 semaphore kernel
advanced settings
diablofuego said:
slim bean 4.2.2 build7 semaphore kernel
Click to expand...
Click to collapse
Tried advance settings external speaker volume still low ...call volume is fine just notification and ringtones seem to be low music is also fine when being played on external speaker.
diablofuego said:
Tried advance settings external speaker volume still low ...call volume is fine just notification and ringtones seem to be low music is also fine when being played on external speaker.
Click to expand...
Click to collapse
If music plays fine, then your speaker is good. You have 3 more things to check:
- What is notification and ringtones volume settings level? Set all sliders to max.
(you probably did)
- Is Ascending Ringtone (in Interface > Sound) enabled? Check Ringing Start Volume and Increase Interval settings.
(set about 40-50% volume for Ringing Start and 2sec for Increase Interval)
- What files you use for notification and ringtone? Some mp3 files are just recorded with low volume level.
(your problem most likely, try with default sounds and find something louder and high pitched)
As i see many people flashing the old oreo stuff from Whiskey on AOSP which result in many bug, i decided to make a module to enable dual speaker mod, pseudo-HIM mode, and Gcam - stereo recording mod on AOSP
Feature:
+ pseudo-HIM mode, should make sound better and DAC toggle work
+ Stereo recording
+ Dual speaker - no mic breaking
+ I still attach the Poweramp 24 bit mod in attached file
Note:
+ Not working with ainur or narsil or any mixer path editing mod
+ Can work together with the Poweramp 24 bit mod attached
+ May have some unknown bug, report if you have any
For old OP:
Hello everyone
After a bit of work, me and @legacyeah manage to bring the great Legacy Audio Mod by @Rizal Lovins, in the form of a Magisk Module for quick installing and removing. We also manged to fix some bug found in the original audio mod.
Features:
* 24 bit output on poweramp
* enable 384 khz resampling
* Working audio recording in video
*Based on and improve upon Rizal Lovins Legacy Audio Mod on XDA[/COLOR][/COLOR]
Notes: DVC in poweramp is bugged so DVC only work with 192, 96,48,44.1 khz resampling rate. Other resampling rate will need DVC disabled
*IMO sound quality is better compare to stock pie, it feel the same as stock LG sound quality*
Confirmed working on Havoc 0402 + Ainur with no other Audio mod or AML , other rom and compatibility with other audio mod need more tester
How to install:
1. On an AOSP Pie rom
2. Have Magisk working (if you dont know what magisk is and how to install it, search Google)
3. Flash the provided zip through TWRP or Magisk manager (Magisk manager may has bugs causing the zip not flashable)
4. Reboot
5. Enjoy ! (Music player may need further setting for 24 bit output)
Note 2: If you find any bug, please feel free to report but please remember if you use this mod with other sound mod (like Viper 4 Android, DTS..) the bug will be noted but no promise for it to be fixed
Credit goes to:
@legacyeah for mic recording bug fix
@Rizal Lovins for the original mod
@SGCMarkus for providing AOSP for our device
And all the testers on telegram group
Update:
*18/2/19: add mod option to force enable HIM ( will cause sound distortion on normal headphone- dont complain)
*23/2/19: 24 bit mod HIM is now a separate module, you can install both module and enable one of your choice
*10/3/19: add 24 bit mod Dual speaker mod. Courtesy of @Dante63. Also cleaning up unnecessary file.
*6/4/19: With new device tree, AOSP now have working 24 bit output by default and HIM mode as well as DAC filter and sound preset working (with Ainur), those mod are depreciated. However, PowerAmp still need a mod to enable 24 bit output. Hence thread is updated with the necessary mod
*3/7/19: Add Pseudo HIM mod, dualspeaker mod, stereo recording.
I noticed that when i take any video from my device after installing this that voice is so much low when i play these videos on my device
Ziad Ajam said:
I noticed that when i take any video from my device after installing this that voice is so much low when i play these videos on my device
Click to expand...
Click to collapse
Low volume on video recording has been mentioned quite a long time on AOSP Pie. Are you sure it happend after flashing this mod. if so please specify: which rom, which camera app and which sound mod did you use?
Thanks man it works well with my v300s stock rom . thumbs up
Mrxyzl said:
Low volume on video recording has been mentioned quite a long time on AOSP Pie. Are you sure it happend after flashing this mod. if so please specify: which rom, which camera app and which sound mod did you use?
Click to expand...
Click to collapse
Actually audio recording was off when i use Gcam but was working well in other apps like snapchat and instagram. Now it works in every app but the recording voice is so weak.
---------- Post added at 06:31 PM ---------- Previous post was at 06:30 PM ----------
Ziad Ajam said:
Actually audio recording was off when i use Gcam but was working well in other apps like snapchat and instagram. Now it works in every app but the recording voice is so weak.
Click to expand...
Click to collapse
Android Pie Lineage OS 16
Ziad Ajam said:
Actually audio recording was off when i use Gcam but was working well in other apps like snapchat and instagram. Now it works in every app but the recording voice is so weak.
---------- Post added at 06:31 PM ---------- Previous post was at 06:30 PM ----------
Android Pie Lineage OS 16
Click to expand...
Click to collapse
So now all apps are having low volume recording or only the Gcam?
I wonder why this would happen because AOSP had low volume recording issue before.
Sent from my LG-H930DS using Tapatalk
Thread update with normal, high impedance mode and dual speaker mode
Working Very perfect in my LG US998 With pie DotOs and Dolby Digital Plus Mod.
No problems work good
So the dual speaker version has working mic?
Also, can you make a dual speaker+him version?
mark20120 said:
So the dual speaker version has working mic?
Also, can you make a dual speaker+him version?
Click to expand...
Click to collapse
I don't see why dual speaker don't have a working Mic.
I'll make one this weekend
It Works!
Mrxyzl, thank you very much. Speaker mod works fine. It would be great if you create a stereo mic mod for PIE camera. It's the only thing I miss in custom PIE roms. Thanks again
Stereo mod with HIM would be perfect.
Thread updated according to changes in new device tree. Add 24 bit mod enable for PowerAmp (only for those who use PowerAMP) other player like neutron and UAPP no need this mod
Mod no longer works after Poweramp v3 build 829 update. Running onHavoc os 2.5 may 20th update for LG V30 H930
Klimon5 said:
Mod no longer works after Poweramp v3 build 829 update. Running onHavoc os 2.5 may 20th update for LG V30 H930
Click to expand...
Click to collapse
thanks. i'll see what i can do this weekend
Edit: something is wrong on your side. mine work perfectly, btw need to enable DVC in order for 24 bit to work
Mrxyzl said:
thanks. i'll see what i can do this weekend
Edit: something is wrong on your side. mine work perfectly, btw need to enable DVC in order for 24 bit to work
Click to expand...
Click to collapse
I fiddled around with some settings. I fixed it. I have been using the 384kHz option with DVC disabled which works but sometimes I end up with the song skipping. I switched it to 192kHz with DVC enabled and that seems to resolve any issues I have. Why are the higher kHz options available if they don't work well or at all? Is it related to the way this mod is set up or how Poweramp is setup?
Klimon5 said:
I fiddled around with some settings. I fixed it. I have been using the 384kHz option with DVC disabled which works but sometimes I end up with the song skipping. I switched it to 192kHz with DVC enabled and that seems to resolve any issues I have. Why are the higher kHz options available if they don't work well or at all? Is it related to the way this mod is set up or how Poweramp is setup?
Click to expand...
Click to collapse
From my experience on stock, 384KHz drops it to 16bit and stops DTS from working.
Sent from my LG-H932 using XDA Labs
Found a way to make GCam record stereo audio
SDevil454000 said:
Found a way to make GCam record stereo audio
Click to expand...
Click to collapse
Much appreciated
Mrxyzl said:
Much appreciated
Click to expand...
Click to collapse
Updated stereo. Sound recording is louder and better quality.