[Q]Adding init.d support for stock rom - Galaxy Ace S5830 Q&A, Help & Troubleshooting

I want to add init.d support for my ddkq8 stock rom..
How to do it?
Please give correct and easy one till date..

Prash_ said:
I want to add init.d support for my ddkq8 stock rom..
How to do it?
Please give correct and easy one till date..
Click to expand...
Click to collapse
Simple. Flash CF-Root kernel

Doo:DAce said:
Simple. Flash CF-Root kernel
Click to expand...
Click to collapse
+1
Sent from my GT-S5830 using Tapatalk 2

Doo:DAce said:
Simple. Flash CF-Root kernel
Click to expand...
Click to collapse
I prefer battery extender kernel 1.2
Does it support init.d??
If no,hw can i do that??
Sent using xda premium

If I'm not wrong battery extender also uses cf root cos I'm using battery extender on my sgs2 rom
Phone:GT-S5830
ROM:SGSII V9
Sent from my S5830

Prash_ said:
I prefer battery extender kernel 1.2
Does it support init.d??
If no,hw can i do that??
Sent using xda premium
Click to expand...
Click to collapse
Yes it does. Im using myth2 with bat extender and adrenaline engine. :good:

Does firekernel support init.d scripts?

lukip005 said:
Does firekernel support init.d scripts?
Click to expand...
Click to collapse
Ya it does

I flashed [KERNEL] 03082012-- Battery extender 1.5.1 over stock Stock DDKQ8 2.3.6 . The kernel got updated but I lost root. Can you tell me how to root it again? I tried the installing upd_1.zip from CWM but it fails. Please help me.

Anyway of doing it without CF-Root Kernel i.e by editing boot.img and adding a few scripts. Tried to understand Chainfire's script (Ketut adaptation) for our model inside boot.img file and found he doesn't seem to enable init.d by editing init.rc like this thread suggest. Can someone shed some light please.

lukip005 said:
I flashed [KERNEL] 03082012-- Battery extender 1.5.1 over stock Stock DDKQ8 2.3.6 . The kernel got updated but I lost root. Can you tell me how to root it again? I tried the installing upd_1.zip from CWM but it fails. Please help me.
Click to expand...
Click to collapse
I also had similiar issue..
First flash stock recovery via CWM...
Then apply root update zip..
Then revert back to CWM..
It'll work..
Sent using xda premium

Related

[Q] Loop Boot Fugumod

Hi all, I've just flash fugumod and at the end of the process I plug off the usb cable.The phone went into a cycle of trying to ignite, in which the display changes to fish fugumod galaxy white letters s. Then I ****ed and I tried to flash the rom JVQ but does not move the bar of odin. Please if anyone knows what should I do to help me thanks.
Can you enter the recovery menu?
Did you tried to do a factory reset before flashing?
Did you by any chance flash FuguMOD Ultra on RFS partitions (without lagfix enabled)?
Thanks for both of you. Finally I solved it by reflashing stock kernel. I dont know for what but my phone has very problems with fugomod kernel so I decided to change the kernel. Bye dudes!
rodrigoalumno said:
Thanks for both of you. Finally I solved it by reflashing stock kernel. I dont know for what but my phone has very problems with fugomod kernel so I decided to change the kernel. Bye dudes!
Click to expand...
Click to collapse
Did u read anything at all of the OP?
What is the OP? Sorry for my ignorance
rodrigoalumno said:
What is the OP? Sorry for my ignorance
Click to expand...
Click to collapse
Original Post
What version did u flash and how? What version were u on? Did u use a rom , a theme. Did u had another kernel on it already?
Give some more info before we can help.
Gvdn said:
Original Post
What version did u flash and how? What version were u on? Did u use a rom , a theme. Did u had another kernel on it already?
Give some more info before we can help.
Click to expand...
Click to collapse
Thanks for the info, I,ve had flashed JVQ 2.3.4 deodex ROM and I've been flashing fugumod when I have the problem. Finally I fixed it reflashing the stock kernel.
rodrigoalumno said:
Thanks for the info, I,ve had flashed JVQ 2.3.4 deodex ROM and I've been flashing fugumod when I have the problem. Finally I fixed it reflashing the stock kernel.
Click to expand...
Click to collapse
What version of fugu!?
Sent from my GT-I9000 using XDA Premium App
Gvdn said:
What version of fugu!?
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
It was the lastest version, thanks.
rodrigoalumno said:
It was the lastest version, thanks.
Click to expand...
Click to collapse
Then i guess u used ultra bleeding edge. This doesn't work when system is on rfs. Read the original post to make it work.
OK I'm in a good mood. Flash the normal version. Boot. Get fugu app from market. Use it to convert system to ext4 or jfs. Reboot. Get sgs kernel flasher from market. Get latest fugu kernel bleeding edge ultra. Flash kernel with sgs kernel flasher. Done.
Sent from my GT-I9000 using XDA Premium App
Thanks for all man. I got it!

Stock ICS 4.0.4 . Which kernel are you using

Now that alot of you have went to 4.0.4 on your GN7000..
And if you are using the stock Samsung Rom
http://forum.xda-developers.com/showthread.php?t=1764893
Have you changed out your kernel?
And if so... To which one and why?
Also... IF you did, How did you do it???
Thanks alot.
All replies and comments are welcomed and encouraged.
Let's get the word out on kernels for 4.0.4
Thanks again
ps.. if you could please include a 'link' (if there isnt one already) to your kernel of choice.. that would be great!
Note core kernel
Sent from my GT-N7000 using xda premium
jimmbomb said:
Now that alot of you have went to 4.0.4 on your GN7000..
And if you are using the stock Samsung Rom
http://forum.xda-developers.com/showthread.php?t=1764893
Have you changed out your kernel?
And if so... To which one and why?
Also... IF you did, How did you do it???
Thanks alot.
All replies and comments are welcomed and encouraged.
Let's get the word out on kernels for
ps.. if you could please include a 'link' (if there isnt one already) to your kernel of choice.. that would be great!
Click to expand...
Click to collapse
This speedmod kernel. Flash it using pc odin. http://forum.xda-developers.com/showthread.php?t=1673072
jonpaslim said:
This speedmod kernel. Flash it using pc odin. http://forum.xda-developers.com/showthread.php?t=1673072
Click to expand...
Click to collapse
Or flash through cwm, then you don't increase binary counter
Sent from my GT-N7000 using Tapatalk 2
http://forum.xda-developers.com/showthread.php?t=1749863
baz77 said:
Or flash through cwm, then you don't increase binary counter
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
...But.. Do we have CWM if we flashed the Stock 4.0.4 only??
And if NOT, can you link us on a 'how to' apply CWM for stock 4.0.4 with stock kernel?
Thanks again!
jimmbomb said:
...But.. Do we have CWM if we flashed the Stock 4.0.4 only??
And if NOT, can you link us on a 'how to' apply CWM for stock 4.0.4 with stock kernel?
Thanks again!
Click to expand...
Click to collapse
Root your phone here. http://forum.xda-developers.com/showthread.php?t=1329360
After that use mobileodin from goggle market to flash speemod in tar files. This will not produce binary count or yellow triagle.
Stock LRG with kimi's 15 toogle systemui.apk on the speedmod 3.9 kernel.
ok... we got speedmod and note core..
only 2??
list your kernel!!!
thanks
Im sticking to 4.0.4 stock kernel since I benchmark with antutu got 6600 point compared 5385 with 4.0.3 speedmode 3-7, battery life can reach a day plus
jimmbomb said:
ok... we got speedmod and note core..
only 2??
list your kernel!!!
thanks
Click to expand...
Click to collapse
Goku safe kernel
Cf root 5.6 safe stock kernel
Franco safe kernel, i dont know if its been already deleted in the forum, last time i read the moderator are going to delete it.
AOKP Milestone 6. With CM9 kernel.. FTW!!
Criskelo v9 franco kernel
Criskelo v9 with franco kernel, but i think i will change to speedmod in 9.1.
Recommendable are cf-root (attention, brick bug), gl_notecore and the latest speedmod (both safe). My favourite would be goku but unfortunately funky81 hasn't adapted it yet to 4.0.4, bluetooth does not work.
Sent from my Galaxy Note running ICS

[q] why my galaxy note gt-n7000

[q] why my galaxy note gt-n7000 is having problem with the camera?
Everytime i shot a picture , the picture stock.! Help please
my cellphone abouts is in my signature
It's a known bug with HydraCore v7.
Sent from my GT-N7000 using xda premium
SpyderTracks said:
It's a known bug with HydraCore v7.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
is there no way to fix it?
pedropenduko said:
is there no way to fix it?
Click to expand...
Click to collapse
Change kernel.
Sent from my GT-N7000 using xda premium
SpyderTracks said:
Change kernel.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
what do you suggest? i want one for good gaming haha
Use an older hydracore like 4.3 or notecore v14
I wouldn't know, maybe someone else can help...
Sent from my GT-N7000 using xda premium
but changing from v7 is a Lil tricky. not as easy as it is with other kernels. you need a revert zip from hydracore thread
nokiamodeln91 said:
but changing from v7 is a Lil tricky. not as easy as it is with other kernels. you need a revert zip from hydracore thread
Click to expand...
Click to collapse
how ? when i revert it what will happen it will return to stock rom?
Are you sure its the gl hydracore kernel im on v7 and my camera is ok running better than stock
Sent from my GT-N7000 using xda premium
pedropenduko said:
how ? when i revert it what will happen it will return to stock rom?
Click to expand...
Click to collapse
when you directly revert from v7, the phone will not boot properly.. so you need to use the revert zip file.. flash that first and then the new kernel.
how will I reinstall hydracore v7??
as you do any other kernel...
nokiamodeln91 said:
as you do any other kernel...
Click to expand...
Click to collapse
you said in your last last comment i need to use a revert.zip to re install it?
not to reinstall, to go back from v7 to any other kernel.
nokiamodeln91 said:
not to reinstall, to go back from v7 to any other kernel.
Click to expand...
Click to collapse
ohh how if i want to go to Philz? what will i do?
uhm like this I am currently using Hydracore v7 and i want it to change to Philz
do i need to use a specific program to do that task?
yes.. then you need to first flash the revert zip and then the philz kernel..
the zip file is in the hydracore thread.. a rapidshare link in the last 3-4 pages
nokiamodeln91 said:
yes.. then you need to first flash the revert zip and then the philz kernel..
the zip file is in the hydracore thread.. a rapidshare link in the last 3-4 pages
Click to expand...
Click to collapse
ok thank you very much
help here is this the thread ur talking about???
http://forum.xda-developers.com/showthread.php?t=1749863

Data2SD-Ext by Styrke doesn't work on JellyBlastV3

This script Data2sd-ext Fixed.zip ( http://forum.xda-developers.com/showthread.php?t=1955422 ) worked on Simplicty v3 perfectly, but when I install it on JellyBlast V3 it just bootloops, I followed every instructions and tried several times but no luck. Please help me.
Did you try wipe data/(dalvik-)cache?
Sent from my GT-S5830i using xda premium
Android-fany said:
Did you try wipe data/(dalvik-)cache?
Sent from my GT-S5830i using xda premium
Click to expand...
Click to collapse
Yes, I did. I think it is incompatible with JellyBlast
Sahaj Jain said:
Yes, I did. I think it is incompatible with JellyBlast
Click to expand...
Click to collapse
Try the cronmod + data2ext script
Sent from my GT-S5830i using xda premium
Android-fany said:
Try the cronmod + data2ext script
Sent from my GT-S5830i using xda premium
Click to expand...
Click to collapse
Do you know a single thing about android
What you are saying can brick the device.
And I can confirm that the script is working on JellyBlast v3
I am using it
But you need to flash Rafael Kernel for that
iamareebjamal said:
Do you know a single thing about android
What you are saying can brick the device.
And I can confirm that the script is working on JellyBlast v3
I am using it
But you need to flash Rafael Kernel for that
Click to expand...
Click to collapse
I mean the second cronmpd script which includes data2sd too.
Sent from my GT-S5830i using xda premium
iamareebjamal said:
Do you know a single thing about android
What you are saying can brick the device.
And I can confirm that the script is working on JellyBlast v3
I am using it
But you need to flash Rafael Kernel for that
Click to expand...
Click to collapse
If you are using Data2sd-ext fixed.zip file then please tell me how did you installed it, I tried the exact procedure that I did for other ROMs (I tried it on Stock, Simplicty, AndroidScream and works perfectly) but why only in JellyBlast it doesn't works :'( And I don't want to use the other script, I want this one as it simply swaps ext with internal drive. And yes I flashed Rafael's kernel also. Please help me, I love your ROM so much it is the best Jellybean looks rom.....I want it so badly...
Sahaj Jain said:
If you are using Data2sd-ext fixed.zip file then please tell me how did you installed it, I tried the exact procedure that I did for other ROMs (I tried it on Stock, Simplicty, AndroidScream and works perfectly) but why only in JellyBlast it doesn't works :'( And I don't want to use the other script, I want this one as it simply swaps ext with internal drive. And yes I flashed Rafael's kernel also. Please help me, I love your ROM so much it is the best Jellybean looks rom.....I want it so badly...
Click to expand...
Click to collapse
Its not my ROM
So I recommend flashing Rafael latest kernel
Then installing JellyBlast and then flashing the script
It works for me
If it does not work
Go to root of your phone to see if there is any sd-ext folder created
If no
Then we would have to check if init.d ix working
Go to /data
And see if there is kuro_tweak1.log there
Tell me after trying

[Q] My S advance Lags and freeze after JB Update

Hi there everybody
first of all i wanna thank you for this amazing Site and Forum.....i really like it and appreciate your efforts here
so my story is simple.....
as you all know that JB 4.1.2 is out for a while now.....but in my country it's not available until now so i decided to update manually
and it work really.....i used the 4.1.2 XXLQG version (don't now if this is the most stable or not)
but after updating my mobile is lagging like hell and freezes when running a game or any heavy apps
so i don't know what to do???.....is this ver of JB not Stable or something??....
if there is any whay to help me it'll be great....
thank You all
Did u factory reset and wipe cache after upgrading? If not do it. LQG is good. Flash CoCore E 7.2 kernel and feel the smoothness.
Sent from my GT-I9070 using xda premium
phyowaiummg said:
Did u factory reset and wipe cache after upgrading? If not do it. LQG is good. Flash CoCore E 7.2 kernel and feel the smoothness.
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
thanks alot for the reply.....but i'm abit of a noob at android can you tell me how to do that
ok i've done the first step but what is (Flash CoCore E 7.2 kernel ) ?
sorry but like i said i'm new to android
totta_fadil said:
thanks alot for the reply.....but i'm abit of a noob at android can you tell me how to do that
ok i've done the first step but what is (Flash CoCore E 7.2 kernel ) ?
sorry but like i said i'm new to android
Click to expand...
Click to collapse
Root your JB and use universal kernel flash app to update to cocore 7.2. It is an zip you can unpack and use the bin file in the ukf app, then reboot
Sent from my GT-I9070 using xda app-developers app
Phoneboot said:
Root your JB and use universal kernel flash app to update to cocore 7.2. It is an zip you can unpack and use the bin file in the ukf app, then reboot
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
so i need to root my device?
is it dangerous?
and the steps....is it here in the forum?
and also what is the advantage of "this" (cocore7.2)
Use this guide for all...
http://forum.xda-developers.com/showthread.php?t=2198341
Sent from my CM10.1
R_a_z_v_a_n said:
Use this guide for all...
http://forum.xda-developers.com/showthread.php?t=2198341
Sent from my CM10.1
Click to expand...
Click to collapse
thanks alot guys for the help.....it works fine now
just another question not related to this post
can i now (my phone is rooted).......put games data in my Sd card
I cant flash SGA XXLQG
phyowaiummg said:
Did u factory reset and wipe cache after upgrading? If not do it. LQG is good. Flash CoCore E 7.2 kernel and feel the smoothness.
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Hello,
I was trying to flash CoCore E 7.2 in recovery, but after start, there was a problem and there was sign: signature verification failed.
I have installed XXLQG on SGA, and i isnt work corrcetly, there are lags, it is really slowly and i am crazy of starting contact book and dialer. It takes 3 or 4 sec.
I dont know if flash repair it, i dont know. And I dont know why I cant flash CoCore E, CoCore + TWRP. Can anybody help me? I need faster phone.
Thanks
Root your phone first.
And dialer lag its a known bug. Use exDialer from market.
Powered by CM10.1
R_a_z_v_a_n said:
Root your phone first.
Powered by CM10.1
Click to expand...
Click to collapse
It is rooted. Why I cant flash kernel?
Sig verification is on stock recovery. Unzip kernel file and flash kernel md5 file using universal kernel flasher.
Sent from my SGS Adv. using xda-developers app.
th3cr0w said:
Sig verification is on stock recovery. Unzip kernel file and flash kernel md5 file using universal kernel flasher.
Sent from my SGS Adv. using xda-developers app.
Click to expand...
Click to collapse
It is ok now, thanks, for your help
what do you mean by ok
tino26 said:
It is ok now, thanks, for your help
Click to expand...
Click to collapse
what do you mean by ok?
Were you able to update the kernel?
After updating kernel is the phone working fast and normal? Is the dialer lag gone?
What is your current kernel then?
and
What is your current ROM?
You also have to disable signature verification in recovery mode, That should do the trick.
Sent from my GT-I9070 using xda app-developers app
Name your current KERNEL & ROM please
totta_fadil said:
thanks alot guys for the help.....it works fine now
just another question not related to this post
can i now (my phone is rooted).......put games data in my Sd card
Click to expand...
Click to collapse
Could you tell me what your current KERNEL is?
Could you tell me what your current ROM is?
Everything running smooth with this combination?
tino26 said:
It is rooted. Why I cant flash kernel?
Click to expand...
Click to collapse
Delete
phyowaiummg said:
Did u factory reset and wipe cache after upgrading? If not do it. LQG is good. Flash CoCore E 7.2 kernel and feel the smoothness.
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
I have I9070JVMD1 and stock kernel.
It lags a lot especially the dialer.
also, while playing long video the device goes into coma - I mean it becomes non-responsive.
If I flash CoCore 7.2 kernel should I get rid of the lags?
Nishad1982 said:
I have I9070JVMD1 and stock kernel.
It lags a lot especially the dialer.
also, while playing long video the device goes into coma - I mean it becomes non-responsive.
If I flash CoCore 7.2 kernel should I get rid of the lags?
Click to expand...
Click to collapse
If you flashed the kernel, the lags won't magically disappear but it is considerably reduced because the lags in dialer/camera/contacts are samsung's fault.
Sent from my GT-I9070 using xda app-developers app
tino26 said:
It is rooted. Why I cant flash kernel?
Click to expand...
Click to collapse
-Deleted-
Nishad1982 said:
what do you mean by ok?
Were you able to update the kernel?
After updating kernel is the phone working fast and normal? Is the dialer lag gone?
What is your current kernel then?
and
What is your current ROM?
Click to expand...
Click to collapse
I´ve updated kerner with universal kelner flasher. Yes phone is faster and i am using exdialer. It is better than original samsung dialer, mainly faster.
I´m using CoCore E 7.5 and XXLQG.

Categories

Resources