Anyone a clue which is the best screen-protection for HTC? And where to get it?
Rudimente said:
Anyone a clue which is the best screen-protection for HTC? And where to get it?
Click to expand...
Click to collapse
It depends on what you want for your screen protector.
There are many options, from your basic cheap clear screen protector to your expensive InvisibleShields. There isn't a "best" option, but it just depends on how you want the screen to feel.
- Spigen makes an excellent anti-fingerprint protector. It's a matte finish to cut down on fingerprints and smudges but also doesn't terribly distort your screen like a cheaper matte protector will.
- XtremeGuard is a nice alternative to InvisibleShield for full body protection. Although it's made of a tough material, you may not like the added friction to the screen. It is a wet-apply protector which can cause issues if you are not comfortable with putting on screen protectors.
- Tempered glass protectors are nice to keep a smooth feel on the screen, and resist scratches a bit better than a typical clear plastic protector will. Getting one with tapered or rounded edges is suggested as it will help resist cracks/chips over time, but of course it can still be damaged.
- Then you have basic clear screen protectors. You can go cheap, with random brands on Amazon, or you can go slightly more expensive like a Spigen Ultra Crystal. The cheap ones are generally fine, but can scratch a little easier and sometimes give off a "rainbow" reflection when you view it from the side with the screen off.
If you're in the US, you can purchase any of them off Amazon.
http://mimeusa.com/product/htc-one-m8-ghost-glass-screen-protector/
http://forum.xda-developers.com/showthread.php?t=2691879
Sent from my HTC One_M8 using Tapatalk
Ebay is full of those protectors, my advice for you is to take a mate one... you can see clearly outside on the sun and it is stainless...
This isn't a review. Just a first impression/initial thoughts.
I handle otterbox cases of all variety everyday. This unicorn beetle feels just as good, quality wise. Its mostly comparable to the defender series however. Both have built in screen protection, port covers. Both utilize a tongue in groove like method of securing the plastic 'inner' to the rugged rubber 'outer'
Overall it feels very secure and robust, but not quite as bulky as a defender in my opinion.
The orzly glass screen protector on my g4 (edge to edge) does not interfere with the 'front' cover of the case. I have removed the built in plastic protector, so i cannot comment on how it feels etc.
I should also note that i have the plastic back on while in this case. I have not and will not attempt installation with the leather back. This case seems to meet and exceed my needs for when rugged protection is required. My typical day to day is case-less, alternating between plastic and leather backs.
The holster seems to be robust. Made with thick plastic and a 360 degree rotating belt clasp. Almost identical to the defenders holster.
Please excuse the purple tint from my m7 camera.
Do you feel like the holster would snap eventually? How did you remove the screen protector? The screen protector is a major drawback to me.
The holster feels very sturdy. However it is plastic after all and im sure it will break under certain conditions. Im at work right now so ill take some photos of the defender series holster for the g3 and post a comparison in this thread later in the evening. The screen protector was attached to the 'front' with an adhesive. It was easy to pop it out. As i mentioned in my original post, my edge to edge tempered glass protector does not interfere with the fitment of this case.
I removed the screen cover the case had built in, and all I did was push it out and pull on it. The glue used is like a double sided tape, so get as much off when removing the screen and peel the rest. DO NOT USE GOO OFF, you'll mess up the case, trust me. Removing the sticky residue is the hardest part honestly.
Sent from my LG-H811 using Tapatalk
Hello!
Currently I'm using
Spigen Slim Armor:
http://www.amazon.com/gp/product/B01AUR18D0?psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s00
IQ Shield Matte
http://www.amazon.com/gp/product/B01BG2ELRI?psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00
Its working horribly, there's bubble in all corners (See photos attached). If i'm not mistaken the spigen case is pushing hard on the corners top and bottom.
Is this happening to some of you guys?
What combination of case and screen protector are you guys using so that this doesn't happens?
Thanks in Advance
I have been using the ZAGG invisible shield hd dry combined with a Supcase Unicorn Beetle Pro.
I LOVE this combo.
The screen protector went on relatively easily. did that day one. no bubbles anywhere and it's super clear. it wrapped around the sides easily with the special applicator included in the box. this is NOT a typical credit card squeegee install. I had it just like that for a few days until the case showed up.
What i like about this case is the two part sandwich effect. There is a frame that clips on the front of the phone and the whole ting then inserts into the back. sort of like the ottorbox cases. only half the price. The frame completely protects the edges of the screen protector, i don't thing there really is a way to accidentally rub on the edges of the screen protector and work it loose.
And bonus, it works in my QI wireless charger with no problems whatsoever.
I've got the IQ shield non matte and a Ringke Fusion Crystal case. It's shock simple and has dust covers.
Case > https://www.amazon.com/dp/B01A16BCMW/ref=cm_sw_r_other_awd_bTE6wb4Q9ZZK8
Sent from my SM-G935V using Tapatalk
mvpulsts said:
I have been using the ZAGG invisible shield hd dry combined with a Supcase Unicorn Beetle Pro.
I LOVE this combo.
The screen protector went on relatively easily. did that day one. no bubbles anywhere and it's super clear. it wrapped around the sides easily with the special applicator included in the box. this is NOT a typical credit card squeegee install. I had it just like that for a few days until the case showed up.
What i like about this case is the two part sandwich effect. There is a frame that clips on the front of the phone and the whole ting then inserts into the back. sort of like the ottorbox cases. only half the price. The frame completely protects the edges of the screen protector, i don't thing there really is a way to accidentally rub on the edges of the screen protector and work it loose.
And bonus, it works in my QI wireless charger with no problems whatsoever.
Click to expand...
Click to collapse
Does the zagg protector should help in case of drops? And is it as good as a tempered glass in that case?
Sent from my SM-G935F using Tapatalk
I don't know about best combo (because this is my first combo) but I have the Spigen Ultra Hybrid crystal clear and the Skinomi TechSkin on my gold platinum S7 Edge and so far so good. I just installed the Skinomi last night since I got it yesterday. My Spigen case I've had on the phone since March 5th when the case arrived. I ordered both products from Amazon.
The Skinomi I had did the same as the op, as for the Zagg HD amazon refunded my order yesterday saying something was wrong the product and they were canceling it.
Sent from my SM-G935V using Tapatalk
I got a similar case for my S7E ... Spigen Tough armor with the Armour Suit Military Shield... still awaiting my phones frm T-mobile
Zagg HD Dry front and back with Otterbox Symmetry Clear Series
My UAG case pushed the top right corner had to trim just a little. This case seems to be more screen protector friendly. Both cases are pretty much identical is size. The otterbox is much stiffer and back seems more scratch resistant, the UAG is already scratched. UAG offers a little more screen protection in the corners and the buttons are much easier to press. Pics are taken on top of the UAG case for size comparison.
Bodyguardz HD Curved with the UAG ICE, No problems with the protector peeling.
AndroiderM said:
My UAG case pushed the top right corner had to trim just a little. This case seems to be more screen protector friendly. Both cases are pretty much identical is size. The otterbox is much stiffer and back seems more scratch resistant, the UAG is already scratched. UAG offers a little more screen protection in the corners and the buttons are much easier to press. Pics are taken on top of the UAG case for size comparison.
Click to expand...
Click to collapse
Any problems with the Otterbox peeling up the sides of the protector?
felloffthetruck said:
Any problems with the Otterbox peeling up the sides of the protector?
Click to expand...
Click to collapse
Nope, everything is laying down with no signs of peeling. The zagg did stay on the phone for 3 days with no case while I was waiting for Amazon to deliver and I did blow dry the edges. I don't think this made a difference, otterbox just seems like it sits on top protector better. The case seems to lack screen protection though, the raised edge on top and bottom of screen is only about 1/16 thick. I've never broke a phone but this might be a deal breakerbreaker for some.
I don't have a way of taking taking a pic right now, but I have the Spigen Tough Armor on my GS7E with a Skinomi MatteSkin screen protector.
The Skin has may be 1-2 mm taller than optimal, I have just the slightest push from the case on the top of the skin, but that could also be my fault for not as well aligning the skin as possible. Tough call. I'll probably be putting a new skin on this week anyway just because I'm OCD about it.
addendum 2016/3/23: replaced the MatteSkin last night and put the Tough Armor back on this morning. Alignment seems good. One 'speck' maybe under the skin near the top under the Samsung logo, you'll see some squiggles there where I was working against it this morning to see if it was a bubble that could be pushed out. {shrug}
Fit between the two seems *tight* but *may* be good or great.
After putting the Tough Armor back on I got some push against the bottom left edge of the MatteSkin but a few passes with a spudger seems to have smoothed it back out. See if it stays.
The inner edge of the Tough Armor on the front top/bottom seems tight and sharp-edged where it meets the phone. If this was backed off 0.5mm-ish there would definitely be no issue.
I know some don't like how much the Tough Armor stiffens up the buttons on the sides, but that works in my favor as it cuts down on unintended activation when the phone is in a backpack or pocket, and the shape of the Armor edge makes for a nice flat stance when using the kickstand or otherwise leaning on the side.
Final word: 97% perfect fit. The case ended up pushing the bottom of the screen protector a bit, the inner most lip edges on the Tough Armor was about 1 mm too far to play nice with the MatteSkin. Trimming the edge of the case with a sharp knife though does resolve it, if you can do that with a truly even hand it probably would be a great combo, my hand isn't that perfect so I had a bit of an irregular edge. Worked well though, otherwise.
I'm currently using the IQ Shield HD Wet screen protector:
http://www.amazon.com/gp/product/B01BG2EJYS?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
With the SUPCASE Unicorn Beetle Rugged Full Body Case:
http://www.amazon.com/SUPCASE-Full-...sr=1-1&keywords=galaxy+s7+edge+unicorn+beetle
I just received the Tech21 Frame case in the mail so will be seeing if that works well with the screen protector. Unfortunately I have heard it doesn't but here's to hoping.
Update: Tech21 Frame case will indeed push up on the edges of the screen protector.
The best screen protector I have used to date is from bestskinsever and their customer service is top notch. It isn't noticble at all and the cutouts are scary accurate.
I have ordered some from xtremeguard and the cutouts are too big and I ended up tossing them. The other brand I tried was some from illumni and they scratch up real easy, the fit was better than extremeguard but not by that much and their customer service sucked.
http://www.bestskinsever.com/samsung-galaxy-s7-skin
Here's the Symmetry with the Bodyguardz HD curved.
ipaq_101 said:
The best screen protector I have used to date is from bestskinsever and their customer service is top notch. It isn't noticble at all and the cutouts are scary accurate.
I have ordered some from xtremeguard and the cutouts are too big and I ended up tossing them. The other brand I tried was some from illumni and they scratch up real easy, the fit was better than extremeguard but not by that much and their customer service sucked.
http://www.bestskinsever.com/samsung-galaxy-s7-skin
Click to expand...
Click to collapse
I just ordered the case friendly and edge to edge to see which one I like better. I agree, their screen protectors are top notch.
Zagg HD Dry + Speck Candyshell Clear
Only been on 24 hrs but it looks like a win so far. Both are seriously good quality products, but then they better be for the price.
Galaxy S7 Edge Case, Spigen® [Ultra Hybrid] AIR CUSHION [Crystal Clear] Clear back panel + TPU bumper for Samsung Galaxy S7 Edge (2016) - 556CS20034 with the hollow bumpers in the corner works well with screenknight protector.
Obliq Naked Shield Black + ArmorSuit MilitaryShield FullScreen Extreme Clarity HD
Case : Obliq Naked Shield
Screen : ArmorSuit MilitaryShield
While I like the look of the Skinomi MatteSkin on the screen I wanted to try something else, for comparison. So I got the ArmorSuit and put it on, along with the Obliq case - changing over from a more stealth to more bling kind of look, truly.
Both the case and shield are a very nice fit for the device. Not as large nor thick as the Tough Armor I had been using, time will tell whether that's good or bad.
The ArmorSuit screen protector, once on and de-bubbled basically disappears. It's only the 1st day of use but it's very much NOT there, visually.
The Obliq case is also very lean, and the back is very clear, letting the look of the silver phone I have glare out at you.
Combined they seem to work seamlessly together. I was concerned in particular because the ArmorSuit is a full coverage, and not their case-friendly version, however in this case they seem to be working well together. I truly must have gotten lucky with the screen protector install because I literally can't see the edges of it vs the edges of the Obliq case. Nice.
The Obliq is NOT as much protection as the Tough Armor, to be sure, but it is prettier and alters the ergonomics and looks of the phone dramatically less.
The Obliq DOES appear to be a "fingerprint magnet" though ... time will tell.
The ArmorSuit does NOT appear to be a fingerprint magnet, which is nice. It is very glossy/reflective though, as a couple of the pics I've attached show.
I initially had this Roya kickstand case.. plus this tempered glass protector
I've decided to give the iq shield (not the matte one) a try per some recommendations on here.. hoping sensitivity is at least "close" to having no protector (like with regular phones + tempered).. i've had iq shield in the past and its been solid though i seem to recall sensitivity taking a hit.
I'm going with the Beetle Pro Full case (not hybrid one).. i guess its harder to get off if you use gear vr.. but i saw a rumor if you cut the bumpers off near the usb on gear vr a case may fit, unsure.
I saw the Spigen with kickstand.. it looks similar to the Beetle Pro.. can anyone comment on how slippery it is, or if its got a good grip like the Beetle Pro (full) and protects the edges too (easier to get off maybe)? Spigen appears to not have edge protection, so similar to Beetle Hybrid ($11.99 vs Spigen at $17.99).. I would think the Beetle Pro Hybrid would make more sense price wise.
I guess if you get the $99 2 year accidental damage samsung warranty then the hybrid is a no brainer.
Heres my Spigen Rugged Armour vs Ringke Onyx Brushed Metal Case comparison reviews with side by side photos
Just a foreword I've only had Spigen cases for my OP3 and its saved me a least a few time I've dropped it either at the airport or the road - brown trouser time where u think the screen will be smashed/cracked. All times walked away with slight mark/scuffs to original OP screen protectors. Fancied something different for my OP5T so went for the Ringke as well.
Look and feel
As you can see both made of same material
The back of Ringke feels unique very sandstone type texture which provides excellent grip whereas the Spigen is very smooth rubber
However the Ringke case feels much thinner so not sure if offers same protection as Spigen
Cutouts and Front lip protection
Front lip protection to protect the screen - think the Spigen wins slight extra thickness to the the lip
Extra protection for the camera both same - few extra mm to protect the rear cameras
Again both have cutouts for all key ports - Ringke also has dust covers for USB-C port and headphone jack which is actually a good thing (fluff stopping charging situations) However a big negative - very hard to access the alert slider using the Ringke due to the top lip so Spigen wins
Both are compatible with the original OP screen protector with no lift off but I think this may be due to human error as I assume applied by hand at factory and I seen some when not fully lined up with screen /front camera etc.
Costs well the Ringke is the slightly cheaper and it came with a free lanyard both premiums products but for me the alert slider access is key issue for me I will keep both and swap due to how I feel. Any questions fire away
I used the Spigen rugged armour on my oneplus 2 and 3. I was thinking about getting it for my OP5T, but I got the sandstone case when I bought the phone and that is just absolutely fantastic... probably doesn't do much when it comes to protecting the phone.. but, it looks amazing.
Once I get tired of looking at this beautiful thing, I will probably end up buying the Rugged Armour
It would be nice to see a pic of the phone in the cases...
Since I've bought a few different cases, I thought I'd do a roundup of them.
Nillkin Super Frosted Shield Matte:
Minimal case, but with a slight lip around the glass and camera bump protection. Full 360 degree coverage with tight cutouts and good buttons. A very tight, accurate fit; it won't bounce off if you drop it.
Covered with a bump pattern to make it grippy. Hard plastic that will likely crack on dropping.
For: people wanting to reduce the slipperiness of the phone, make the bump look less dumb, and protect from scratches and light drops.
Spigen Liquid Air:
Light by Spigen's chonky boi standards, this gives protection not far off their Rugged Armour series without the goofy carbon fibre accents. Looks good and fits great. Large protection lip around the screen and sufficient camera cover. Tasteful design. Not as grippy as you'd think, but better than just the phone.
For: serial phone-droppers who don't want to make their giant phone any more gigantic. A good compromise case.
Official "sandstone" bumper case:
More rugged than the Super Frosted Shield, but with openings for the rockers, buttons, and top and bottom.
Extremely grippy texture and a tight fit. Good screen lip protection and camera cover. Aesthetically a bit weird; a bit "HTC Desire era" with the big gaps all around. Tasteful OnePlus logo.
Colour and texture of an asteroid space station wall; really needs to have "REMEMBER THE CANT" spray painted on it.
For: official case fans who don't mind paying twice what it's worth (unless you find it on eBay). Daredevils. People who like to click the proper buttons.
All three are good, but if you spend the RRP on the official case, you should go get your face paint on and get to the circus, because you're a clown.
Good write-up ?. Though I tried a couple of cases - both military types and transparent types - I couldn't find any of them good. I still use the official transparent case that came with the phone. I couldn't find any better than this case.
For military types I hate them because of the thick bumper sides that eliminates the bezel-less nature of the phone. Yes the military types meant for that kinda protection but I don't like those cases. For the transparent ones none of them gives that extra bumper for the screen and back camera glass like the official Twitter m transparent case. All of them were sh*ts.
For my old Lenovo Z2 Plus, there were a vast variety of colored back covers with extra screen and back camera bumper protection. I had more than 20 cases in different types and colors. My MiA1 also has more than 10 different cases. Note that these weren't just cheap quality cases with some printed graphics, these were all in plain solid colors. I don't know why case manufacturers of 7T never make such kind of cases.
Two months ago I was planning to make a custom made plastic-printed case with the help of my friend, he has a 3d printer with him. I even made a 3d model of the phone and case in my PC. But due to the pandemic I had to stop the process. Not sure if I can do the further developments.
Sent from my OnePlus7T using XDA Labs
I’ve never understood why “military grade” is considered a selling point. Have these people never met someone who was in the military? Everything’s made by the lowest bidder!
I agree with the lack of case options. I don’t think the OnePlus 7T sold all that well or something, it’s disappointing.
I got my 7T used and it came with three official cases. I'll add to your list, if you don't mind.
Karbon Protective Case:
This case is just like the Sandstone in that the buttons, slider and top/bottom are exposed. The feel is interestingly rubbery, but a bit slippery. It is very thin and almost looks like a skin until you look closer. Not that it is that thin, but fits so well. It's so thin it adds nearly no weight. The OnePlus logo is far more pronounced than the Sandstone, and really pops being so silvery-white. It makes me wish the Sandstone had a silver/white logo, it's that good.
Sandstone Protective Case:
Basically everything you said. The grip is incredible and you will be hard-pressed to drop your phone unless you're being careless. An improvement over the 5T Sandstone as the texture is slightly better. My go-to case, really.
Red Silicone Bumper Case:
This thing is pure red. Wow, that red! It is noticeably more bulky than the Karbon and Sandstone. There is no lip for the camera bump because it's bulky enough to clear it. So the back is smooth all the way, no table wobble. The inside of the case is a nice suade. It actually is an awesome premium touch, and you feel good to know your phone is safe from even case scratches, lol. Covers all buttons, makes the slider a bit more difficult to reach (but not too much), and covers all the way around the top and bottom, leaving ample holes for the microphone, charging port and bottom speaker. There is an ample lip all the way around. The feel is similar to the Karbon but more grippy. Softer feeling. The logo is understated and just recessed in the silicone.
All of these cases feel very premium (to me) and the fit is so perfect I think they're worth the investment. Especially if they last as long as my Sandstone from the 5T I used since launch.
Update: I've been using the official Sandstone case as my daily driver for nearly four months now. I've had a bunch of drops from pocket height onto concrete without any damage to the phone, and the case texture hides the dings very well.
Would recommend again.