So in my attempts to undo unbrick my bionic i was able to get back on the path and got into a rooted 901 version YEAH.
Problem is my webtop version is WT 1.3.0-105_DBN-1 which is not the current version. Does anyone have a way to get an updated grfs version onto the phone or a process that works coming from 901?
The problem as I see it, is that you aren't really on 5.9.901 because you couldnt have updated with the leaked update.zip without having all of the signed components from 5.5.893 including the webtop partition. You must be using a ROM that updated only your system and nothing else.
The solution is to use the full 5.5.893 xml.zip released recently and flash it with RSD Lite and it will put you back on the path with all the stock images.
If you wanted to only flash the grfs.img from that file then you need to use the moto-fastboot.exe instead of the fastboot.exe because it is modified to handle larger than 256MB images.
It is difficult to tell where you really are with all of your firmware components and whether just flashing the webtop will do you any good. That is why i recommend the full xml.zip and RSD Lite.
This is the method that a technician would use to fix a returned device to stock and is what the file is designed to do. Its like an SBF file but uses the fastboot interface instead of the old flash interface.
We have all the tools we need to recover virtually all problem flashes at this point, and its up to everyone who is modding these devices to understand the options before you flash any ROMs so you dont find yourself returning a device that you destroyed to VZW for warranty replacement, a practice all to common unfortunately.
ok so heres the deal. i already have the file downloaded via the updater in the settings already to get installed. but i used rom toolkit to modify my status bar and install a custom bootanimation as well as a few other things like that. do i have to use rsd lite and a full 902 fxz file to do a full sweep and clean recovery before installing 905? also does it require me to uninstall safestrap? i'm not entirely sure if anyone else has answered these questions as i don't know if anyone else has done these kind of things before upgrading to 905. i plan on installing the ICS leak after installing 905 thats why i wish to know these things as i'd rather not screw up my phone after i've put so much time and effort into making it the way i want it you know? OH one other question! i know that the ICS leak is rootable does that mean safestrap is also ICS leak friendly?
I believe you should be able to just run the update and the Bionic will reboot into stock recovery. I would create a nandroid just to be safe so you can restore if something goes wrong. I read somewhere that the ICS leak requires you to eliminate safestrap though I am not sure if that is true or not.
I decidex to go thd longer safer route of rsd lol. But i rooted the leak and safestrapped it and it still works so yay!!!! Lol
Sent from my DROID BIONIC using XDA
So you can successfully dual boot with safe strap on the leak? Great to hear!
Yesterday i flashed if i remember the 223 leak. I flashed from 905, rooted with razor ics root. I went in to sqlite and changed the setting to get the free hotspot and than rebooted. Now on my top banner the wifi icon and my signal icon stay gray! They never got to blue! I have data service but the are always gray. Also later my signal strength went noticeably lower than before i flashed! Any help would be great! ...... also i just noticed that my browser is talking! Had chrome installed, couldn't find anything in the settings so i uninstalled and went to reinstall. Play store says that NOW its not compatible with my device! And now my stock browser is talking to me! PLEASE HELP!!!!!!
Sent from my DROID BIONIC using xda app-developers app
One thing at a tine.
Browser talking - check you're accessibility settings, see if Talkback is enabled.
For the GNow, that does not come with the ICS leaks. Either you installed an unofficial leak, or you installed GNow before the leak, or you installed it after the leak. There is a thread in XDA that details how to get GNow working in ICS.
For the sqlite mod, change the string back. Foxfi is free, doesn't require root, and works.
Sent from my rooted BIONIC running ICS 6.7.235 via Tapatalk 2
Thanks, I FXZed back and reloaded everything no sqlite no root and everything seems good! Still lost data for a while last night but l don't have great service at home! Might root later today, we'll see!
Sent from my DROID BIONIC using xda app-developers app
I do have one more question! If i go from .233 can i just flash .235 or do i need to FXZ again?
Sent from my DROID BIONIC using xda app-developers app
Each time you try to flash a new ics leak you HAVE TO FLASH BACK TO 902/905
if you flash to 235 YOU CAN NOT FLASH BACK TO 902/905 but you can only move foward
I recommend you stay on 232 unless you dont care about flashing back to gb
bhp117 said:
Each time you try to flash a new ics leak you HAVE TO FLASH BACK TO 902/905
if you flash to 235 YOU CAN NOT FLASH BACK TO 902/905 but you can only move foward
I recommend you stay on 232 unless you dont care about flashing back to gb
Click to expand...
Click to collapse
If people are going to keep stating this, then they need to qualify it with the fact that you can still install GB roms on the safe side. You can even put .905 stock back on safe or unsafe using the backup restore within Safestrap (if you have the stock .905 backup file that is). There's a lot of scare about .235, but all you have to do is change how you flash and you don't "lose" anything. **Wonder if I will have to make another tutorial for people on .235...goodness**
What? We have a locked boot loader... can't run .235 on one side and .905 on the other lol
What he said was correct.. you cannot use RSD lite to fxz back to .902/.905 with .235 so unless you're a fool don't make the move... 232 is great
Finally Iced Out Legitimately... Bionic is back
You cannot go back to fully stock Gingerbread anything once you flash .235 so for the sake of newer users being thrown off the upgrade path and not being able to FXZ back to .905 we all should just leave it at that.
cnorman76 said:
I do have one more question! If i go from .233 can i just flash .235 or do i need to FXZ again?
Sent from my DROID BIONIC using xda app-developers app
Click to expand...
Click to collapse
I think you've gotten the gist of the info, but I'll reiterate.
You have to be on .905 to flash any of the current ICS leaks (and there is a 99% chance of that being true with any future leaks / soak tests / final OTA b/c .905 is the current official OS version for the BIONIC.
You can flash .235 off of .905, but once you are in .235, you cannot restore your phone to .905 via FXZ, and you cannot try to fool the system with a simple Nandroid backup of .905 that you restore over .235. The reason is that the update script also looks to patch several things.
First of all, no update script ever includes the boot.img of the version that is being installed. It includes a patch file that requires you to have either the boot.img of the system that you are coming from, or the system that you are going to. Any other version and it throws up an error and does not allow the update to continue. IOW, if, say, leak .241 comes out, and you're on .235, you have no way to getting .241 without using a method to make the .241 kernel. You cannot flash the .905 kernel onto a .235 system - it trips eFuse and bricks the phone. You have no .241 kernel to install b/c, as I said, the update only includes a patch file, not the full kernel.
Second, even provide that you pass that (which in theory you might as you are on a .235 leak with only .905 /system restored from a Nandroid backup, and if the new leak uses the exact same kernel you'll pass), it also verifies every file in /system that it is going to patch, along with every file in /preinstall that you are going to patch. Restoring that Nandroid backup does wonders for having the .905 /system on your phone, but the current leak you are on has already patched several files in /preinstall, so those signatures will not match, and you'll fail the verification step, and ultimately the update will fail.
For the record, a typical FXZ flashes 17 different partitions on our phones. Nandroid backups on the BIONIC typically can only make backups of 3-4 of those partitions. We have figured out ways to grab a few more of them, but we are still stuck at grabbing a couple of them, and there are 4-5 that we cannot grab from our phones at all.
Since the folks with RAZRs went through something very similar in May and June, mattlgroff figured out a way to fool the update into thinking you have all the components correct in place that need to be there, and the update proceeds. Thus far, after bricking my phone trying to FXZ back to .905 / .902, I used a script to get back on .235, then verified that the move to reinstall the .235 leak works. If another leak is found, then I can test the second part of the script, that which allows new leaks to be installed. The script does not allow any older ICS leak to be installed, and currently there is no way to go back to a previous leak nor a previous GB stock FXZ at all. Even if we had a .223X ICS FXZ or a .22X ICS FXZ or a .230/.232 FXZ, they would not work on a phone that has been updated to .235.
That is why we're saying hold off unless you're 100% positive you're willing to accept the risk - this is way beyond the risk associated with rooting your phone. If Motorola makes the next leak force the phone to have components from .905 that we cannot flash into a .235 upgraded phone, I (and several others that have taken the plunge) might be permanently stuck on .235 until an FXZ for a version of ICS higher than or equal to .235 is released. And that typically takes 6-8 weeks.
HTH
crobs808 said:
If people are going to keep stating this, then they need to qualify it with the fact that you can still install GB roms on the safe side. You can even put .905 stock back on safe or unsafe using the backup restore within Safestrap (if you have the stock .905 backup file that is). There's a lot of scare about .235, but all you have to do is change how you flash and you don't "lose" anything. **Wonder if I will have to make another tutorial for people on .235...goodness**
Click to expand...
Click to collapse
Make a guide if you will and state the proper steps to do so
I had one issue with. 232. I noticed the lock screen is useless. My home button unlicked the screen plus the notification bar scrolled down to unlock also lol. Other that that it amazing
Sent from my DROID BIONIC using xda app-developers app
dblkspecial said:
I had one issue with. 232. I noticed the lock screen is useless. My home button unlicked the screen plus the notification bar scrolled down to unlock also lol. Other that that it amazing
Sent from my DROID BIONIC using xda app-developers app
Click to expand...
Click to collapse
i noticed that the other day when I got a text while my screen was locked. I naturally pulled the notification bar down and noticed that I didn't unlock my phone at first. Tried it just now and it's unlocking without swiping to unlock. My home button doesn't do anything howerver.
Hello all, I'm not new to rooting and flashing roms but am new to the Droid Bionic. I've been doing hours of research and haven't been able to find a solution to my problem yet although it is probably here somewhere. I have a Droid Bionic and have been on Gingerbread for some time. Im not sure of the official update im on but I decided Id like to try an ics leak. The one i tried had two files: one was called SpearmintGum_targa-Release-1.2, and the other was called speargapps-ics-20120304-signed. Now i had a friend help me out and we did it together but we both failed to read the instructions saying not to reboot before installation of the 2nd package. So now i have my Droid Bionic stuck in a bootloop and nothing ive tried works. Ive tried RSD Lite to go back to stock .902 and it didnt work. I tried rebooting into stock recovery and i just dont know what to do! If there is already an answer to my question Id really appreciate to be pointed in the right direction to the thread. If anyone knows what i can do to fix id really appreciate it. Thanks in advance
Need to find out what version you're on. Settings, scroll to bottom, about phone, and get it. Also, if you're not on a later build, no reason to fxz to 902 when 905 is out. Also need RSD 5.7 and latest moto drivers. Let me know when you get all that. I'll walk you through it.
Sent from my DROID BIONIC using Tapatalk 2
he said he gets boot loops, i'm guessing he can't get into settings, about, etc
Did you use as or BS to install? You should be able to pull battery if on BS, wipe all and restore nandroids. Otherwise post above has a valid point.
Sent from my DROID BIONIC using Tapatalk 2
Try this:
First download an ics leak for bionic. Then RSD to .905 gingerbread. Put the ics leak on your phone and boot into stock recovery. Install the leak from there and see if your phone boots up. Wait at least 10 minutes before seeing if it failed or not.
For the record you were trying to flash a ics rom not a ics leak
All ics leaks just require to flash 1 file in stock recovery
You can try to use this script to fxz back to 905 and then try a ics leak
http://www.droidforums.net/forum/droid-bionic-hacks/214902-downgrade-902-no-app-data-loss.html
AND MAKE SURE YOU READ THE OP AND UNDERSTAND THE INSTRUCTIONS BEFORE YOU DO ANYTHING
good luck
If your still having issues, I can help. PM me.
Well, I've been searching for days and I haven't found which sbf will work, so I figured I'd just throw up a quick post. Does anyone know specifically which sbf I need to download? I haven't heard anyone using the .906 OR the .890 so I'm a little bit confused. I know theres a ton of these threads but nobody actually says they're on ICS currently.
If it matters:
Verizon model
Last Gummy update from Hashcode's ICS port back in Feb (could be more recent, but havent messed with it since then-ish)
Rooted (rofl obviously)
latest safestrap
Hopefully this can clear up any confusion on the topic. If I somehow missed this thread already being discussed, let me know and I'll delete this topic like the derp I probably am. Thanks!
what ota were you on before you installed the ics rom?
if you were on 890 then you would use the 890 sbf
if you were on 906 then you would use the 906 sbf