So, my work lets me swap around phones...so they got me the iPhone 4 a while ago...I was on Android before that, thought I'd give iOS a spin...anyhoo, I wanted to go back to my Vivid but I didn't want to have to keep bugging my cellphone lady at work to keep changing the SIMs around (micro to regular or whatnot). So I wanted to see if I could make a little adapter (easy enough...tons of videos and whatnot online) and then see if I could get the Vivid to act normal with the data.
Put the SIM in and phone part worked fine but of course no data. So I started hunting down various APN settings...trying this and that...at one point I had notifications working..but browsers and other apps still couldn't use data. Finally, I just starting toying around and found settings that let me have data! Figured I would post them in case anyone else is in a similar situation.
Name: AT&T
APN: wap.cingular
Proxy: BLANK
Port: BLANK
Username: [email protected]
Password: CINGULAR1
Server: BLANK
MMSC: http://mmcs.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication type: PAP or CHAP
APN type: default
Bearer: Unspecified
There you have it. "Authentication type" was the kicker it seemed...none of the sites I found (even here) mentioned it...so i just always left it to "None"...but then decided to change it and that seemed to do the trick.
Hope this helps someone.
Related
Hey guys (and girls), since my first question was answered so well here I am back for more of your knowledge
Ok, so I have the Call, Text, and Click plan from Rogers that allows me to have unlimited mobile internet access. The only problem is I can not access it. I have tried every Rogers APN I can find on the internet and all of them make the E logo appear and even make the arrows flash every once in a while as if it is trying to access but it fails every time. Here is a list of the APNs I have tried in case there is one I have missed:
Name: Rogers
APN: rogers-core-appl1.apn
MMSC: http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 720
------
Name: Rogers
APN: rogers-core-appl1.apn
MCC: 302
MNC: 720
------
Name: Rogers
APN: internet.com
Username: wapuser1
Password: wap
MCC: 302
MNC: 720
-----
Name: Rogers
APN: internet.com
Username: guest
Password: guest
MCC: 302
MNC: 720
-----
Name: Rogers
APN: internet.com
MCC: 302
MNC: 720
*EDIT*
By the way I have an unlocked T-Mobile G1 and I have tried turning data roaming on and off with no luck.
Can anyone help me? Is anyone else at least having the same problem?
Well there's the problem..
Crysanna of IntoMobile said:
Unlimited on device browsing is not compatible with the iPhone. It is only available for WAP browsing on specific websites (websites specifically designed for mobile phones and available through the Rogers (NYSE: RCI) portal). Since the iPhone uses regular HTTP Internet (like you see whenever you use a computer) and not WAP, the unlimited browsing will not work...
Click to expand...
Click to collapse
So I know it says iPhone but it also tells how the unlimited browsing is WAP which the G1 does not use.. So I basically wasted $20 this month on something I can't even use. That's nice.. Damn Rogers should have said something..
So I am confused now. I used these settings I just screwing around on google cause I have nothing better to do at 11pm on a thursday night:
Name: Rogers
APN: internet.com
Username: wapuser1
Password: wap
MCC: 302
MNC: 720
Proxy: 208.200.67.150
Port: 9201
APN Type: Wap
And now I get internet.. What?
:EDIT:
After about 15 minutes of excitement and the ability to finally browse the internet on my G1 sans-wifi, it has stopped working..
So I am slowly realizing that I am the only person with this problem and it seems like I am gonna have to fix this myself. Well I will keep posting just in case I get a fix and someone else wants to know how its done.
I just flashed Overcome 3.1 on the my ATT Galaxy Tab 7. The rom is super smooth. Everything appeared to go flawlessly however once completed I was unable to establish a proper data connection.
Its shows 4 bars and says connected to ATT as the "Network" under the Status menu. However the "Mobile Network State" is listed as disconnected.
If I go into the Mobile Network Settings. Under Network Operators ATT is listed under Auto Connect and if I rescan it accepts the choice and then says Registered on Network.
I cannot browse the internet. I called ATT and they were able to send me a SMS so there is some sort of connection. We could not troubleshoot any further as there systems are down.
I did a vanilla Overcome Install. Is there a post install step that I need to do? I seem to remember a similar issue with my Dell Streak that involved modifying my APN settings. Here are the APN settings for the device. (these are the Overcome defaults i believe)
Name: ATT
APN: wap.cingular
Proxy: leave blank
Port: leave blank
User name: [email protected]
Password: blank
Sever: leave blank (Will read: <not set>)
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
Authentication type: none
APN type: internet+mms
I read this on this forum somewhere, and has always worked for me when reflashing. This is ONLY for the Pay as You Go data service to my knowledge. Your mileage may vary.
I changed my APN to the following EXACTLY:
Name: Broadband
APN: Broadband
Proxy: leave blank
Port: leave blank
User name: blank
Password: blank
Sever: leave blank (Will read: <not set>)
MMSC: not set (delete whats in here)
MMS proxy: not set (delete whats in here)
MMS port: not set (delete whats in here)
MCC: 310
MNC: 410
Authentication type: none
APN type: internet
I always get a connection this way. No MMS, but I don't use it anyway, that's what my phone is for.
The "broadband" apn is only for the sim card that came with a stock at&t tab, and not for the sim cards we all took from other phones.
For the former phone sim cards, wap.cingular or isp.cingular apn's.
The setting should be to "auto".
You didn't mention your modem - baseband.
rangercaptain said:
You didn't mention your modem - baseband.
Click to expand...
Click to collapse
Baseband: I9000UGJK3
Modem: I am not sure how to verify this on the device (Im an n00b). I did follow the wonderful guide on Team Overcome and it recommended using "JK3 Modem" During the install. I would assume this is what I am using. How can I verify this?
PS. I wapped in my phone SIM card and everything works just fine. I can even make phone calls!
Droid2Froyo said:
I read this on this forum somewhere, and has always worked for me when reflashing. This is ONLY for the Pay as You Go data service to my knowledge. Your mileage may vary.
I changed my APN to the following EXACTLY:
Name: Broadband
APN: Broadband
Proxy: leave blank
Port: leave blank
User name: blank
Password: blank
Sever: leave blank (Will read: <not set>)
MMSC: not set (delete whats in here)
MMS proxy: not set (delete whats in here)
MMS port: not set (delete whats in here)
MCC: 310
MNC: 410
Authentication type: none
APN type: internet
I always get a connection this way. No MMS, but I don't use it anyway, that's what my phone is for.
Click to expand...
Click to collapse
This did the trick! I used these settings with the replacement SIM card they gave me at the ATT store...
Good job. The baseband is the modem, so you are using JK3 - that's the best choice for you.
Downloading the AT&T Widget seemed to of helped: http://forum.xda-developers.com/showthread.php?t=898688
My employer provides me with cell service and to date hasn't cared if I use the Blackberry they provide or put the AT&T SIM in a personal phone. Provided I don't hassle the phone support staff with problems I created, of course. I've used the same SIM in 3 different phones over the past year and haven't had a single issue. I just got a used Atrix HD and discovered that it uses a micro-SIM instead of a regular size. I used a template and cut it down to size (and I think I did it correctly). I put it in the AHD and the SIM is recognized as AT&T but I cannot get data service. On first use with the bone stock ROM, I got a text message and was able to reply to it. Because I have no intention of staying stock, over the past two hours I've done the following:
Rooted
Unlocked bootloader
Installed the ATT-US_BuildA ROM
Wiped that and installed CM10.1 nightly from 05/16
I've not been able to get any data service and now the status is 'In service' for Service state, 'Disconnected' for Mobile network state, and 'Unknown' for Phone Number. Even after cutting down the SIM, I can put it back in my Blackberry and voice and data work just fine. Thus I know the SIM is healthy. Questions:
Is the mini-card slot in the AHD that finicky that a mm difference in card size will dork it up?
The SIM is several years old now. Is it obsolete for the AHD (not withstanding size)?
Are there any settings in the phone that I'm overlooking? The eBay seller was in the US but I do not know the original location of the phone.
Thanks for any advice you can provide. Unfortunately, I can't take it to an AT&T store because the account is my employer's. And my employer really doesn't want to deal with my issue that only exists because they were nice and turned a blind eye to me.
maybe you need to change your APN settings go to settings and under wireless and networks select "more...."
then mobile networks and then access point names select the menu option in the top right and select "New APN" and enter the info below
Name: Cingular 410
APN: wap.cingular
Proxy: Blank
Port: Blank
Username: [email protected]
Password: CINGULAR1
Server: cingulargprs.com
MMSC: http://mms.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: Blank
MCC: 310
MNC: 410
Authentication type: Blank
APN Type: default,supl,mms
APN protocol: leave as is
Bearer: leave as is
For 4G
Name: AT&T HSPA+
APN: phone
Proxy: Blank
Port: Blank
Username: blank
Password: blank
Server: blank
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: Blank
APN Type: default,supl,mms,hipri
APN protocol: leave as is
Bearer: leave as is
Thank you!!!!!!!!!
The 4G settings were successful and I'm good to go. I'm very grateful and thanks again!
No problem glad to hear it worked.
Just came from the rezound, upgraded to HTC one. The phone is only a week old, all stock, the data doesn't seem to be working right. Always getting connection timeout or just sits there, arrows on top don't even light up. I've gone thru 4 gigs in less than a week and I haven't done anything. Everything is unsynced and background data is restricted. Called Verizon and got some girl who wouldn't do anything but have me take out the SIM card. Any fix or any suggestions? I can also still return the phone, I'm still under the 14 day trial.
rickyjohn said:
Just came from the rezound, upgraded to HTC one. The phone is only a week old, all stock, the data doesn't seem to be working right. Always getting connection timeout or just sits there, arrows on top don't even light up. I've gone thru 4 gigs in less than a week and I haven't done anything. Everything is unsynced and background data is restricted. Called Verizon and got some girl who wouldn't do anything but have me take out the SIM card. Any fix or any suggestions? I can also still return the phone, I'm still under the 14 day trial.
Click to expand...
Click to collapse
check your apn settings:
settings ---> mobile data ---> access point names
check that your apn is correctly configured for verizon
Name: Verizon
APN: internet or vzwinternet
Proxy: blank
Port: blank
Username: blank
Password: blank
Server: blank
MMSC: http://mms.vtext.com/servlets/mms
MMS Proxy: blank
MMS Port: 80
MCC: 310
MNC: 012
Authent. type: not set
APN Type: internet + mms
You could try installing something like 3g watchdog, or my data manager. It will tell you which apps are downloading/uploading, and how much they have used aswel.
Sent from my HTC One using Tapatalk
Name: internet
APN: vzwinternet
Proxy: not set
Port: not set
Username: not set
Password: not set
Server: not set
Mmsc: its ok!
Mms proxy: not set
Mms port: not set
Mms protocol: wap 2.0
Mcc: 311
Mnc: 480
Authentication type: not set
Apn type: not set
Apn enable/disable: enabled
Bearer: unspecified
I'm guessing it's not right. Stock 4.4.2 - 3.11.605.1
**Reset Network Settings leaves the APS Settings blank**
I have an SM-N960U (factory unlocked) running Android 10. I am using a Red Pocket CDMA-V sim card. At first, the phone wouldn't register Verizon. It was stuck in T-Mobile. Replaced the Sim card and it registered to Verizon, but still no MMS. Everything works - Voice, SMS, Internet/Data - Just won't send or receive MMS. Red Pocket keeps re-provisioning/registering my device and sim, and still no MMS.
Every time I add a new APN Setting, I lose voice, data,and sms. (I've never gotten MMS working)
Red Pocket says that even though the phone is factory unlocked, it may not be a "Verizon Registered Device." Huh?? I touched bases with Verizon, but they had never heard of such a thing. Anyway, I'm stuck with this phone while my other Note gets a new screen installed, and I need MMS for work.
Here are the two APN Settings we've tried. The first one, I found on my own. The second one, came directly from red Pocket Customer Service. Neither worked for MMS.
1) I found this one online. No MMS.
Name: Verizon
APN: VZWINTERNET
Proxy:
Port:
Username:
Password:
Server:
MMSC:
MMS proxy:
MMS port:
MCC: 311
MNC: 480
Authentication Type: None
APN Type: default,dun,supl
APN Protocol: IPv4/IPv6
APN Roaming Protocol: IPv4/IPv6
Bearer: HSPA,GPRS,EDGE,eHRPD,UMTS,LTE,HSPAP,HSDPA,HSUPA
2) This one came from the Red Pocket Rep. MMS still doesn't work and these last two values won't save/stick. (These two values)
MVNO: GID
MVNO Value: 4201
APN Name: Internet/MMS2
APN: vzwinternet
Proxy: Leave as it is or blank
Port: Leave as it is or blank
Username: Leave as it is or blank
Password: Leave as it is or blank
Server: Leave as it is or blank
MMSC: https://mms.vtext.com/servlets/mms
MMS Proxy: Leave as it is or blank
MMS Port: 80
MCC: 311
MNC: 480
Authentication Type: Leave as it is or blank
APN Type: default,supl,mms
APN Protocol: IPv4/IPv6
APN Roaming Protocol: IPv4
MVNO: GID
MVNO Value: 4201